From: Paul Gortmaker <paul.gortmaker@windriver.com>
To: davem@davemloft.net
Cc: netdev@vger.kernel.org
Subject: [PATCH 12/15] netdev: relocate sb1000 ISA cable modem driver to legacy
Date: Thu, 28 Oct 2010 21:19:16 -0400 [thread overview]
Message-ID: <1288315159-1350-13-git-send-email-paul.gortmaker@windriver.com> (raw)
In-Reply-To: <1288315159-1350-1-git-send-email-paul.gortmaker@windriver.com>
As yet another ISA device, this board is limited to being used
in motherboards that are 10+ years old. Hence relocate it to
the legacy dir.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
---
drivers/net/Kconfig | 24 ------------------------
drivers/net/Makefile | 1 -
drivers/net/legacy/Kconfig | 24 ++++++++++++++++++++++++
drivers/net/legacy/Makefile | 1 +
drivers/net/{ => legacy}/sb1000.c | 0
5 files changed, 25 insertions(+), 25 deletions(-)
rename drivers/net/{ => legacy}/sb1000.c (100%)
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index 7a0912e..707c9f8c 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -168,30 +168,6 @@ config VETH
When one end receives the packet it appears on its pair and vice
versa.
-config NET_SB1000
- tristate "General Instruments Surfboard 1000"
- depends on PNP
- ---help---
- This is a driver for the General Instrument (also known as
- NextLevel) SURFboard 1000 internal
- cable modem. This is an ISA card which is used by a number of cable
- TV companies to provide cable modem access. It's a one-way
- downstream-only cable modem, meaning that your upstream net link is
- provided by your regular phone modem.
-
- At present this driver only compiles as a module, so say M here if
- you have this card. The module will be called sb1000. Then read
- <file:Documentation/networking/README.sb1000> for information on how
- to use this module, as it needs special ppp scripts for establishing
- a connection. Further documentation and the necessary scripts can be
- found at:
-
- <http://www.jacksonville.net/~fventuri/>
- <http://home.adelphia.net/~siglercm/sb1000.html>
- <http://linuxpower.cx/~cable/>
-
- If you don't have this card, of course say N.
-
source "drivers/net/arcnet/Kconfig"
config MII
diff --git a/drivers/net/Makefile b/drivers/net/Makefile
index 3182544..ff138b0 100644
--- a/drivers/net/Makefile
+++ b/drivers/net/Makefile
@@ -111,7 +111,6 @@ obj-$(CONFIG_STMMAC_ETH) += stmmac/
obj-$(CONFIG_SUNDANCE) += sundance.o
obj-$(CONFIG_HAMACHI) += hamachi.o
obj-$(CONFIG_NET) += Space.o loopback.o
-obj-$(CONFIG_NET_SB1000) += sb1000.o
obj-$(CONFIG_HP100) += hp100.o
obj-$(CONFIG_FEC) += fec.o
obj-$(CONFIG_FEC_MPC52xx) += fec_mpc52xx.o
diff --git a/drivers/net/legacy/Kconfig b/drivers/net/legacy/Kconfig
index 96d667e..b9ea8ed 100644
--- a/drivers/net/legacy/Kconfig
+++ b/drivers/net/legacy/Kconfig
@@ -649,3 +649,27 @@ config SMC9194
To compile this driver as a module, choose M here. The module
will be called smc9194.
+
+config NET_SB1000
+ tristate "General Instruments Surfboard 1000"
+ depends on PNP
+ ---help---
+ This is a driver for the General Instrument (also known as
+ NextLevel) SURFboard 1000 internal
+ cable modem. This is an ISA card which is used by a number of cable
+ TV companies to provide cable modem access. It's a one-way
+ downstream-only cable modem, meaning that your upstream net link is
+ provided by your regular phone modem.
+
+ At present this driver only compiles as a module, so say M here if
+ you have this card. The module will be called sb1000. Then read
+ <file:Documentation/networking/README.sb1000> for information on how
+ to use this module, as it needs special ppp scripts for establishing
+ a connection. Further documentation and the necessary scripts can be
+ found at:
+
+ <http://www.jacksonville.net/~fventuri/>
+ <http://home.adelphia.net/~siglercm/sb1000.html>
+ <http://linuxpower.cx/~cable/>
+
+ If you don't have this card, of course say N.
diff --git a/drivers/net/legacy/Makefile b/drivers/net/legacy/Makefile
index 0268706..b703327 100644
--- a/drivers/net/legacy/Makefile
+++ b/drivers/net/legacy/Makefile
@@ -75,3 +75,4 @@ obj-$(CONFIG_AT1700) += at1700.o
obj-$(CONFIG_IBMLANA) += ibmlana.o
obj-$(CONFIG_ETH16I) += eth16i.o
obj-$(CONFIG_SMC9194) += smc9194.o
+obj-$(CONFIG_NET_SB1000) += sb1000.o
diff --git a/drivers/net/sb1000.c b/drivers/net/legacy/sb1000.c
similarity index 100%
rename from drivers/net/sb1000.c
rename to drivers/net/legacy/sb1000.c
--
1.7.3.2.146.g2d444
next prev parent reply other threads:[~2010-10-29 1:19 UTC|newest]
Thread overview: 38+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-10-29 1:19 [PATCH 0/15] RFC: create drivers/net/legacy for ISA, EISA, MCA drivers Paul Gortmaker
2010-10-29 1:19 ` [PATCH 01/15] net: introduce legacy dir to absorb 10Mbit, ISA, EISA drivers Paul Gortmaker
2010-10-29 1:19 ` [PATCH 02/15] 3c501: relocate ancient 8 bit ISA driver to legacy dir Paul Gortmaker
2010-10-29 1:19 ` [PATCH 03/15] de6xx: relocate ancient parallel port eth drivers to legacy Paul Gortmaker
2010-10-29 1:19 ` [PATCH 04/15] sun3: Relocate the sun3 specific lance/83596 " Paul Gortmaker
2010-10-29 1:19 ` [PATCH 05/15] dec netdev: relocate DIGITAL based " Paul Gortmaker
2010-10-29 4:21 ` Maciej W. Rozycki
2010-10-29 4:29 ` David Miller
2010-10-29 4:54 ` Maciej W. Rozycki
2010-10-29 5:46 ` Maciej W. Rozycki
2010-10-29 5:53 ` David Miller
2010-10-29 5:47 ` David Miller
2010-10-29 5:50 ` Maciej W. Rozycki
2010-10-29 5:53 ` David Miller
2010-10-29 6:37 ` Maciej W. Rozycki
2010-10-29 1:19 ` [PATCH 06/15] netdev: relocate i8258x and i8259x " Paul Gortmaker
2010-10-29 1:19 ` [PATCH 07/15] lance: relocate legacy 7990 " Paul Gortmaker
2010-10-29 1:19 ` [PATCH 08/15] netdev: relocate toplevel 8390 based drivers to legacy dir Paul Gortmaker
2010-10-29 1:19 ` [PATCH 09/15] netdev: relocate remaining ISA 3Com cards " Paul Gortmaker
2010-10-29 1:19 ` [PATCH 10/15] netdev: relocate more one-off drivers to the " Paul Gortmaker
2010-10-29 1:19 ` [PATCH 11/15] netdev: kill off the concept of NET_VENDOR_FOO Paul Gortmaker
2010-10-29 1:19 ` Paul Gortmaker [this message]
2010-10-29 1:19 ` [PATCH 13/15] netdev: kill off NET_ISA Kconfig option Paul Gortmaker
2010-10-29 1:19 ` [PATCH 14/15] MAINTAINERS: updates for new drivers/net/legacy dir Paul Gortmaker
2010-10-29 1:19 ` [PATCH 15/15] netdev: relocate LICENSE.SRC to legacy Paul Gortmaker
2010-10-29 1:48 ` [PATCH 0/15] RFC: create drivers/net/legacy for ISA, EISA, MCA drivers Joe Perches
2010-10-29 9:40 ` David Lamparter
2010-10-29 10:13 ` Maciej W. Rozycki
2010-10-29 21:26 ` Paul Gortmaker
2010-10-29 22:08 ` Joe Perches
2010-10-30 0:01 ` Jeff Kirsher
2010-11-04 21:20 ` Paul Gortmaker
2010-11-05 2:28 ` Jeff Kirsher
2010-11-05 12:51 ` Paul Gortmaker
2010-11-18 23:52 ` Joe Perches
2010-11-19 0:34 ` Jeff Kirsher
[not found] ` <alpine.LNX.2.01.1012161253560.3000@obet.zrqbmnf.qr>
2010-12-16 12:22 ` Jan Engelhardt
2010-12-17 9:51 ` Jeff Kirsher
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1288315159-1350-13-git-send-email-paul.gortmaker@windriver.com \
--to=paul.gortmaker@windriver.com \
--cc=davem@davemloft.net \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).