From: Paul Gortmaker <paul.gortmaker@windriver.com>
To: davem@davemloft.net
Cc: netdev@vger.kernel.org
Subject: [PATCH 13/15] netdev: kill off NET_ISA Kconfig option
Date: Thu, 28 Oct 2010 21:19:17 -0400 [thread overview]
Message-ID: <1288315159-1350-14-git-send-email-paul.gortmaker@windriver.com> (raw)
In-Reply-To: <1288315159-1350-1-git-send-email-paul.gortmaker@windriver.com>
The NET_ISA option was like the NET_VENDOR_<xyz> options in that it
just hid a bunch of config options from being presented. For those
drivers that depended on it to provide the ISA dependency, just have
them depend on ISA directly.
The NETDEV_LEGACY option is used to hide all these NET_ISA options,
so that the end number of options presented is largely unchanged.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
---
drivers/net/Kconfig | 17 -----------------
drivers/net/legacy/Kconfig | 22 +++++++++++-----------
2 files changed, 11 insertions(+), 28 deletions(-)
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index 707c9f8c..0433c35 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -701,23 +701,6 @@ config HP100
To compile this driver as a module, choose M here. The module
will be called hp100.
-config NET_ISA
- bool "Other ISA cards"
- depends on ISA
- ---help---
- If your network (Ethernet) card hasn't been mentioned yet and its
- bus system (that's the way the cards talks to the other components
- of your computer) is ISA (as opposed to EISA, VLB or PCI), say Y.
- Make sure you know the name of your card. Read the Ethernet-HOWTO,
- available from <http://www.tldp.org/docs.html#howto>.
-
- If unsure, say Y.
-
- Note that the answer to this question doesn't directly affect the
- kernel: saying N will just cause the configurator to skip all
- the remaining ISA network card questions. If you say Y, you will be
- asked for your specific card in the following questions.
-
config IBMVETH
tristate "IBM LAN Virtual Ethernet support"
depends on PPC_PSERIES
diff --git a/drivers/net/legacy/Kconfig b/drivers/net/legacy/Kconfig
index b9ea8ed..5736338 100644
--- a/drivers/net/legacy/Kconfig
+++ b/drivers/net/legacy/Kconfig
@@ -108,7 +108,7 @@ config DEPCA
config EWRK3
tristate "EtherWORKS 3 (DE203, DE204, DE205) support"
- depends on NET_ISA
+ depends on ISA
select CRC32
---help---
This driver supports the DE203, DE204 and DE205 network (Ethernet)
@@ -235,7 +235,7 @@ config ELMC_II
config EEXPRESS
tristate "EtherExpress 16 support"
- depends on NET_ISA
+ depends on ISA
---help---
If you have an EtherExpress16 network (Ethernet) card, say Y and
read the Ethernet-HOWTO, available from
@@ -249,7 +249,7 @@ config EEXPRESS
config EEXPRESS_PRO
tristate "EtherExpressPro support/EtherExpress 10 (i82595) support"
- depends on NET_ISA
+ depends on ISA
---help---
If you have a network (Ethernet) card of this type, say Y. This
driver supports Intel i82595{FX,TX} based boards. Note however
@@ -262,7 +262,7 @@ config EEXPRESS_PRO
config LP486E
tristate "LP486E on board Ethernet"
- depends on NET_ISA
+ depends on ISA
help
Say Y here to support the 82596-based on-board Ethernet controller
for the Panther motherboard, which is one of the two shipped in the
@@ -270,7 +270,7 @@ config LP486E
config ZNET
tristate "Zenith Z-Note support (EXPERIMENTAL)"
- depends on NET_ISA && EXPERIMENTAL && ISA_DMA_API
+ depends on ISA && EXPERIMENTAL && ISA_DMA_API
help
The Zenith Z-Note notebook computer has a built-in network
(Ethernet) card, and this is the Linux driver for it. Note that the
@@ -501,7 +501,7 @@ config ULTRA32
config E2100
tristate "Cabletron E21xx support"
- depends on NET_ISA
+ depends on ISA
select CRC32
help
If you have a network (Ethernet) card of this type, say Y and read
@@ -513,7 +513,7 @@ config E2100
config HPLAN_PLUS
tristate "HP PCLAN+ (27247B and 27252A) support"
- depends on NET_ISA
+ depends on ISA
select CRC32
help
If you have a network (Ethernet) card of this type, say Y and read
@@ -525,7 +525,7 @@ config HPLAN_PLUS
config HPLAN
tristate "HP PCLAN (27245 and other 27xxx series) support"
- depends on NET_ISA
+ depends on ISA
select CRC32
help
If you have a network (Ethernet) card of this type, say Y and read
@@ -537,7 +537,7 @@ config HPLAN
config NE2000
tristate "NE2000/NE1000 support"
- depends on NET_ISA || (Q40 && m) || M32R || MACH_TX49XX
+ depends on ISA || (Q40 && m) || M32R || MACH_TX49XX
select CRC32
---help---
If you have a network (Ethernet) card of this type, say Y and read
@@ -600,7 +600,7 @@ config AT1700
config ETH16I
tristate "ICL EtherTeam 16i/32 support"
- depends on NET_ISA
+ depends on ISA
help
If you have a network (Ethernet) card of this type, say Y and read
the Ethernet-HOWTO, available from
@@ -611,7 +611,7 @@ config ETH16I
config SEEQ8005
tristate "SEEQ8005 support (EXPERIMENTAL)"
- depends on NET_ISA && EXPERIMENTAL
+ depends on ISA && EXPERIMENTAL
help
This is a driver for the SEEQ 8005 network (Ethernet) card. If this
is for you, read the Ethernet-HOWTO, available from
--
1.7.3.2.146.g2d444
next prev parent reply other threads:[~2010-10-29 1:19 UTC|newest]
Thread overview: 38+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-10-29 1:19 [PATCH 0/15] RFC: create drivers/net/legacy for ISA, EISA, MCA drivers Paul Gortmaker
2010-10-29 1:19 ` [PATCH 01/15] net: introduce legacy dir to absorb 10Mbit, ISA, EISA drivers Paul Gortmaker
2010-10-29 1:19 ` [PATCH 02/15] 3c501: relocate ancient 8 bit ISA driver to legacy dir Paul Gortmaker
2010-10-29 1:19 ` [PATCH 03/15] de6xx: relocate ancient parallel port eth drivers to legacy Paul Gortmaker
2010-10-29 1:19 ` [PATCH 04/15] sun3: Relocate the sun3 specific lance/83596 " Paul Gortmaker
2010-10-29 1:19 ` [PATCH 05/15] dec netdev: relocate DIGITAL based " Paul Gortmaker
2010-10-29 4:21 ` Maciej W. Rozycki
2010-10-29 4:29 ` David Miller
2010-10-29 4:54 ` Maciej W. Rozycki
2010-10-29 5:46 ` Maciej W. Rozycki
2010-10-29 5:53 ` David Miller
2010-10-29 5:47 ` David Miller
2010-10-29 5:50 ` Maciej W. Rozycki
2010-10-29 5:53 ` David Miller
2010-10-29 6:37 ` Maciej W. Rozycki
2010-10-29 1:19 ` [PATCH 06/15] netdev: relocate i8258x and i8259x " Paul Gortmaker
2010-10-29 1:19 ` [PATCH 07/15] lance: relocate legacy 7990 " Paul Gortmaker
2010-10-29 1:19 ` [PATCH 08/15] netdev: relocate toplevel 8390 based drivers to legacy dir Paul Gortmaker
2010-10-29 1:19 ` [PATCH 09/15] netdev: relocate remaining ISA 3Com cards " Paul Gortmaker
2010-10-29 1:19 ` [PATCH 10/15] netdev: relocate more one-off drivers to the " Paul Gortmaker
2010-10-29 1:19 ` [PATCH 11/15] netdev: kill off the concept of NET_VENDOR_FOO Paul Gortmaker
2010-10-29 1:19 ` [PATCH 12/15] netdev: relocate sb1000 ISA cable modem driver to legacy Paul Gortmaker
2010-10-29 1:19 ` Paul Gortmaker [this message]
2010-10-29 1:19 ` [PATCH 14/15] MAINTAINERS: updates for new drivers/net/legacy dir Paul Gortmaker
2010-10-29 1:19 ` [PATCH 15/15] netdev: relocate LICENSE.SRC to legacy Paul Gortmaker
2010-10-29 1:48 ` [PATCH 0/15] RFC: create drivers/net/legacy for ISA, EISA, MCA drivers Joe Perches
2010-10-29 9:40 ` David Lamparter
2010-10-29 10:13 ` Maciej W. Rozycki
2010-10-29 21:26 ` Paul Gortmaker
2010-10-29 22:08 ` Joe Perches
2010-10-30 0:01 ` Jeff Kirsher
2010-11-04 21:20 ` Paul Gortmaker
2010-11-05 2:28 ` Jeff Kirsher
2010-11-05 12:51 ` Paul Gortmaker
2010-11-18 23:52 ` Joe Perches
2010-11-19 0:34 ` Jeff Kirsher
[not found] ` <alpine.LNX.2.01.1012161253560.3000@obet.zrqbmnf.qr>
2010-12-16 12:22 ` Jan Engelhardt
2010-12-17 9:51 ` Jeff Kirsher
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1288315159-1350-14-git-send-email-paul.gortmaker@windriver.com \
--to=paul.gortmaker@windriver.com \
--cc=davem@davemloft.net \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).