From: Paul Gortmaker <paul.gortmaker@windriver.com>
To: davem@davemloft.net
Cc: netdev@vger.kernel.org
Subject: [PATCH 03/15] de6xx: relocate ancient parallel port eth drivers to legacy
Date: Thu, 28 Oct 2010 21:19:07 -0400 [thread overview]
Message-ID: <1288315159-1350-4-git-send-email-paul.gortmaker@windriver.com> (raw)
In-Reply-To: <1288315159-1350-1-git-send-email-paul.gortmaker@windriver.com>
These old drivers pre-date USB, coming from the early 1990's
and with the legacy parallel port also now largely gone from
any current hardware, these need to be relocated to the legacy
directory, since they won't have been in active use for years.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
---
drivers/net/Kconfig | 30 ------------------------------
drivers/net/Makefile | 2 --
drivers/net/legacy/Kconfig | 30 ++++++++++++++++++++++++++++++
drivers/net/legacy/Makefile | 2 ++
drivers/net/{ => legacy}/de600.c | 0
drivers/net/{ => legacy}/de600.h | 0
drivers/net/{ => legacy}/de620.c | 0
drivers/net/{ => legacy}/de620.h | 0
8 files changed, 32 insertions(+), 32 deletions(-)
rename drivers/net/{ => legacy}/de600.c (100%)
rename drivers/net/{ => legacy}/de600.h (100%)
rename drivers/net/{ => legacy}/de620.c (100%)
rename drivers/net/{ => legacy}/de620.h (100%)
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index cb7f3f4..eb65a3a 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -1867,36 +1867,6 @@ config ATP
To compile this driver as a module, choose M here: the module
will be called atp.
-config DE600
- tristate "D-Link DE600 pocket adapter support"
- depends on NET_POCKET && PARPORT
- ---help---
- This is a network (Ethernet) device which attaches to your parallel
- port. Read <file:Documentation/networking/DLINK.txt> as well as the
- Ethernet-HOWTO, available from
- <http://www.tldp.org/docs.html#howto>, if you want to use
- this. It is possible to have several devices share a single parallel
- port and it is safe to compile the corresponding drivers into the
- kernel.
-
- To compile this driver as a module, choose M here: the module
- will be called de600.
-
-config DE620
- tristate "D-Link DE620 pocket adapter support"
- depends on NET_POCKET && PARPORT
- ---help---
- This is a network (Ethernet) device which attaches to your parallel
- port. Read <file:Documentation/networking/DLINK.txt> as well as the
- Ethernet-HOWTO, available from
- <http://www.tldp.org/docs.html#howto>, if you want to use
- this. It is possible to have several devices share a single parallel
- port and it is safe to compile the corresponding drivers into the
- kernel.
-
- To compile this driver as a module, choose M here: the module
- will be called de620.
-
config SGISEEQ
tristate "SGI Seeq ethernet controller support"
depends on SGI_HAS_SEEQ
diff --git a/drivers/net/Makefile b/drivers/net/Makefile
index eb99117..41594da 100644
--- a/drivers/net/Makefile
+++ b/drivers/net/Makefile
@@ -174,8 +174,6 @@ obj-$(CONFIG_DUMMY) += dummy.o
obj-$(CONFIG_IFB) += ifb.o
obj-$(CONFIG_MACVLAN) += macvlan.o
obj-$(CONFIG_MACVTAP) += macvtap.o
-obj-$(CONFIG_DE600) += de600.o
-obj-$(CONFIG_DE620) += de620.o
obj-$(CONFIG_LANCE) += lance.o
obj-$(CONFIG_SUN3_82586) += sun3_82586.o
obj-$(CONFIG_SUN3LANCE) += sun3lance.o
diff --git a/drivers/net/legacy/Kconfig b/drivers/net/legacy/Kconfig
index fa2d6f8..ef6fa1f 100644
--- a/drivers/net/legacy/Kconfig
+++ b/drivers/net/legacy/Kconfig
@@ -14,3 +14,33 @@ config EL1
To compile this driver as a module, choose M here. The module
will be called 3c501.
+
+config DE600
+ tristate "D-Link DE600 pocket adapter support"
+ depends on NET_POCKET && PARPORT
+ ---help---
+ This is a network (Ethernet) device which attaches to your parallel
+ port. Read <file:Documentation/networking/DLINK.txt> as well as the
+ Ethernet-HOWTO, available from
+ <http://www.tldp.org/docs.html#howto>, if you want to use
+ this. It is possible to have several devices share a single parallel
+ port and it is safe to compile the corresponding drivers into the
+ kernel.
+
+ To compile this driver as a module, choose M here: the module
+ will be called de600.
+
+config DE620
+ tristate "D-Link DE620 pocket adapter support"
+ depends on NET_POCKET && PARPORT
+ ---help---
+ This is a network (Ethernet) device which attaches to your parallel
+ port. Read <file:Documentation/networking/DLINK.txt> as well as the
+ Ethernet-HOWTO, available from
+ <http://www.tldp.org/docs.html#howto>, if you want to use
+ this. It is possible to have several devices share a single parallel
+ port and it is safe to compile the corresponding drivers into the
+ kernel.
+
+ To compile this driver as a module, choose M here: the module
+ will be called de620.
diff --git a/drivers/net/legacy/Makefile b/drivers/net/legacy/Makefile
index acbf0b2..e82ca16 100644
--- a/drivers/net/legacy/Makefile
+++ b/drivers/net/legacy/Makefile
@@ -3,3 +3,5 @@
#
obj-$(CONFIG_EL1) += 3c501.o
+obj-$(CONFIG_DE600) += de600.o
+obj-$(CONFIG_DE620) += de620.o
diff --git a/drivers/net/de600.c b/drivers/net/legacy/de600.c
similarity index 100%
rename from drivers/net/de600.c
rename to drivers/net/legacy/de600.c
diff --git a/drivers/net/de600.h b/drivers/net/legacy/de600.h
similarity index 100%
rename from drivers/net/de600.h
rename to drivers/net/legacy/de600.h
diff --git a/drivers/net/de620.c b/drivers/net/legacy/de620.c
similarity index 100%
rename from drivers/net/de620.c
rename to drivers/net/legacy/de620.c
diff --git a/drivers/net/de620.h b/drivers/net/legacy/de620.h
similarity index 100%
rename from drivers/net/de620.h
rename to drivers/net/legacy/de620.h
--
1.7.3.2.146.g2d444
next prev parent reply other threads:[~2010-10-29 1:19 UTC|newest]
Thread overview: 38+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-10-29 1:19 [PATCH 0/15] RFC: create drivers/net/legacy for ISA, EISA, MCA drivers Paul Gortmaker
2010-10-29 1:19 ` [PATCH 01/15] net: introduce legacy dir to absorb 10Mbit, ISA, EISA drivers Paul Gortmaker
2010-10-29 1:19 ` [PATCH 02/15] 3c501: relocate ancient 8 bit ISA driver to legacy dir Paul Gortmaker
2010-10-29 1:19 ` Paul Gortmaker [this message]
2010-10-29 1:19 ` [PATCH 04/15] sun3: Relocate the sun3 specific lance/83596 drivers to legacy Paul Gortmaker
2010-10-29 1:19 ` [PATCH 05/15] dec netdev: relocate DIGITAL based " Paul Gortmaker
2010-10-29 4:21 ` Maciej W. Rozycki
2010-10-29 4:29 ` David Miller
2010-10-29 4:54 ` Maciej W. Rozycki
2010-10-29 5:46 ` Maciej W. Rozycki
2010-10-29 5:53 ` David Miller
2010-10-29 5:47 ` David Miller
2010-10-29 5:50 ` Maciej W. Rozycki
2010-10-29 5:53 ` David Miller
2010-10-29 6:37 ` Maciej W. Rozycki
2010-10-29 1:19 ` [PATCH 06/15] netdev: relocate i8258x and i8259x " Paul Gortmaker
2010-10-29 1:19 ` [PATCH 07/15] lance: relocate legacy 7990 " Paul Gortmaker
2010-10-29 1:19 ` [PATCH 08/15] netdev: relocate toplevel 8390 based drivers to legacy dir Paul Gortmaker
2010-10-29 1:19 ` [PATCH 09/15] netdev: relocate remaining ISA 3Com cards " Paul Gortmaker
2010-10-29 1:19 ` [PATCH 10/15] netdev: relocate more one-off drivers to the " Paul Gortmaker
2010-10-29 1:19 ` [PATCH 11/15] netdev: kill off the concept of NET_VENDOR_FOO Paul Gortmaker
2010-10-29 1:19 ` [PATCH 12/15] netdev: relocate sb1000 ISA cable modem driver to legacy Paul Gortmaker
2010-10-29 1:19 ` [PATCH 13/15] netdev: kill off NET_ISA Kconfig option Paul Gortmaker
2010-10-29 1:19 ` [PATCH 14/15] MAINTAINERS: updates for new drivers/net/legacy dir Paul Gortmaker
2010-10-29 1:19 ` [PATCH 15/15] netdev: relocate LICENSE.SRC to legacy Paul Gortmaker
2010-10-29 1:48 ` [PATCH 0/15] RFC: create drivers/net/legacy for ISA, EISA, MCA drivers Joe Perches
2010-10-29 9:40 ` David Lamparter
2010-10-29 10:13 ` Maciej W. Rozycki
2010-10-29 21:26 ` Paul Gortmaker
2010-10-29 22:08 ` Joe Perches
2010-10-30 0:01 ` Jeff Kirsher
2010-11-04 21:20 ` Paul Gortmaker
2010-11-05 2:28 ` Jeff Kirsher
2010-11-05 12:51 ` Paul Gortmaker
2010-11-18 23:52 ` Joe Perches
2010-11-19 0:34 ` Jeff Kirsher
[not found] ` <alpine.LNX.2.01.1012161253560.3000@obet.zrqbmnf.qr>
2010-12-16 12:22 ` Jan Engelhardt
2010-12-17 9:51 ` Jeff Kirsher
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1288315159-1350-4-git-send-email-paul.gortmaker@windriver.com \
--to=paul.gortmaker@windriver.com \
--cc=davem@davemloft.net \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).