From: "Timo Teräs" <timo.teras@iki.fi>
To: netdev@vger.kernel.org, Herbert Xu <herbert@gondor.apana.org.au>
Cc: "Timo Teräs" <timo.teras@iki.fi>
Subject: [PATCH] xfrm: use gre key as flow upper protocol info
Date: Wed, 3 Nov 2010 16:41:38 +0200 [thread overview]
Message-ID: <1288795298-323-1-git-send-email-timo.teras@iki.fi> (raw)
The GRE Key field is intended to be used for identifying an individual
traffic flow within a tunnel. It is useful to be able to have XFRM
policy selector matches to have different policies for different
GRE tunnels.
Signed-off-by: Timo Teräs <timo.teras@iki.fi>
---
Basic testing done, but more knowledgeable should check that I did
not miss anything essential.
include/net/flow.h | 2 ++
include/net/xfrm.h | 6 ++++++
net/ipv4/ip_gre.c | 12 +++++++-----
net/ipv4/xfrm4_policy.c | 15 +++++++++++++++
4 files changed, 30 insertions(+), 5 deletions(-)
diff --git a/include/net/flow.h b/include/net/flow.h
index 0ac3fb5..7196e68 100644
--- a/include/net/flow.h
+++ b/include/net/flow.h
@@ -67,6 +67,7 @@ struct flowi {
} dnports;
__be32 spi;
+ __be32 gre_key;
struct {
__u8 type;
@@ -78,6 +79,7 @@ struct flowi {
#define fl_icmp_code uli_u.icmpt.code
#define fl_ipsec_spi uli_u.spi
#define fl_mh_type uli_u.mht.type
+#define fl_gre_key uli_u.gre_key
__u32 secid; /* used by xfrm; see secid.txt */
} __attribute__((__aligned__(BITS_PER_LONG/8)));
diff --git a/include/net/xfrm.h b/include/net/xfrm.h
index bcfb6b2..54b2832 100644
--- a/include/net/xfrm.h
+++ b/include/net/xfrm.h
@@ -805,6 +805,9 @@ __be16 xfrm_flowi_sport(struct flowi *fl)
case IPPROTO_MH:
port = htons(fl->fl_mh_type);
break;
+ case IPPROTO_GRE:
+ port = htonl(fl->fl_gre_key) >> 16;
+ break;
default:
port = 0; /*XXX*/
}
@@ -826,6 +829,9 @@ __be16 xfrm_flowi_dport(struct flowi *fl)
case IPPROTO_ICMPV6:
port = htons(fl->fl_icmp_code);
break;
+ case IPPROTO_GRE:
+ port = htonl(fl->fl_gre_key) & 0xffff;
+ break;
default:
port = 0; /*XXX*/
}
diff --git a/net/ipv4/ip_gre.c b/net/ipv4/ip_gre.c
index 70ff77f..ffc78e8 100644
--- a/net/ipv4/ip_gre.c
+++ b/net/ipv4/ip_gre.c
@@ -779,9 +779,9 @@ static netdev_tx_t ipgre_tunnel_xmit(struct sk_buff *skb, struct net_device *dev
.tos = RT_TOS(tos)
}
},
- .proto = IPPROTO_GRE
- }
-;
+ .proto = IPPROTO_GRE,
+ .fl_gre_key = tunnel->parms.o_key
+ };
if (ip_route_output_key(dev_net(dev), &rt, &fl)) {
dev->stats.tx_carrier_errors++;
goto tx_error;
@@ -958,7 +958,8 @@ static int ipgre_tunnel_bind_dev(struct net_device *dev)
.tos = RT_TOS(iph->tos)
}
},
- .proto = IPPROTO_GRE
+ .proto = IPPROTO_GRE,
+ .fl_gre_key = tunnel->parms.o_key
};
struct rtable *rt;
@@ -1223,7 +1224,8 @@ static int ipgre_open(struct net_device *dev)
.tos = RT_TOS(t->parms.iph.tos)
}
},
- .proto = IPPROTO_GRE
+ .proto = IPPROTO_GRE,
+ .fl_gre_key = t->parms.o_key
};
struct rtable *rt;
diff --git a/net/ipv4/xfrm4_policy.c b/net/ipv4/xfrm4_policy.c
index 4464f3b..57af4bd 100644
--- a/net/ipv4/xfrm4_policy.c
+++ b/net/ipv4/xfrm4_policy.c
@@ -11,6 +11,7 @@
#include <linux/err.h>
#include <linux/kernel.h>
#include <linux/inetdevice.h>
+#include <linux/if_tunnel.h>
#include <net/dst.h>
#include <net/xfrm.h>
#include <net/ip.h>
@@ -158,6 +159,20 @@ _decode_session4(struct sk_buff *skb, struct flowi *fl, int reverse)
fl->fl_ipsec_spi = htonl(ntohs(ipcomp_hdr[1]));
}
break;
+
+ case IPPROTO_GRE:
+ if (pskb_may_pull(skb, xprth + 12 - skb->data)) {
+ __be16 *greflags = (__be16 *)xprth;
+ __be32 *gre_hdr = (__be32 *)xprth;
+
+ if (greflags[0] & GRE_KEY) {
+ if (greflags[0] & GRE_CSUM)
+ gre_hdr++;
+ fl->fl_gre_key = gre_hdr[1];
+ }
+ }
+ break;
+
default:
fl->fl_ipsec_spi = 0;
break;
--
1.7.1
next reply other threads:[~2010-11-03 14:41 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-11-03 14:41 Timo Teräs [this message]
2010-11-03 20:16 ` [PATCH] xfrm: use gre key as flow upper protocol info Michał Mirosław
2010-11-03 21:35 ` Jesse Gross
2010-11-03 21:46 ` Michał Mirosław
2010-11-15 18:43 ` David Miller
2010-11-23 14:03 ` Timo Teräs
2010-11-28 19:22 ` David Miller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1288795298-323-1-git-send-email-timo.teras@iki.fi \
--to=timo.teras@iki.fi \
--cc=herbert@gondor.apana.org.au \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).