From: Eric Dumazet <eric.dumazet@gmail.com>
To: Taku Izumi <izumi.taku@jp.fujitsu.com>
Cc: "netdev@vger.kernel.org" <netdev@vger.kernel.org>,
Jay Vosburgh <fubar@us.ibm.com>
Subject: Re: [PATCH] bonding: add the sysfs interface to see RLB hash table
Date: Tue, 30 Nov 2010 11:10:29 +0100 [thread overview]
Message-ID: <1291111829.2904.25.camel@edumazet-laptop> (raw)
In-Reply-To: <4CF4CB85.4010708@jp.fujitsu.com>
Le mardi 30 novembre 2010 à 19:01 +0900, Taku Izumi a écrit :
> This patch provides the sysfs interface to see RLB hash table
> like the following:
>
> # cat /sys/class/net/bond0/bonding/rlb_hash_table
>
> SourceIP DestinationIP Destination MAC DEV
> 10.124.196.205 10.124.196. 81 00:19:99:XX:XX:XX eth3
> 10.124.196.205 10.124.196.222 00:0a:79:XX:XX:XX eth0
> 10.124.196.205 10.124.196. 75 00:15:17:XX:XX:XX eth4
> 10.124.196.205 10.124.196. 1 00:21:d8:XX:XX:XX eth3
> 10.124.196.205 10.124.196.205 ff:ff:ff:ff:ff:ff eth0
>
why spaces in IP addresses ?
>
> This is helpful to check if the receive load balancing works as expected.
>
> Signed-off-by: Taku Izumi <izumi.taku@jp.fujitsu.com>
>
> ---
> drivers/net/bonding/bond_sysfs.c | 56 +++++++++++++++++++++++++++++++++++++++
> 1 file changed, 56 insertions(+)
>
> Index: net-next/drivers/net/bonding/bond_sysfs.c
> ===================================================================
> --- net-next.orig/drivers/net/bonding/bond_sysfs.c
> +++ net-next/drivers/net/bonding/bond_sysfs.c
> @@ -43,6 +43,7 @@
> #include <linux/nsproxy.h>
>
> #include "bonding.h"
> +#include "bond_alb.h"
>
> #define to_dev(obj) container_of(obj, struct device, kobj)
> #define to_bond(cd) ((struct bonding *)(netdev_priv(to_net_dev(cd))))
> @@ -1643,6 +1644,60 @@ out:
> static DEVICE_ATTR(resend_igmp, S_IRUGO | S_IWUSR,
> bonding_show_resend_igmp, bonding_store_resend_igmp);
>
> +/*
> + * Show RLB hash table
> + */
> +#define RLB_NULL_INDEX 0xffffffff
> +static ssize_t bonding_show_rlb_hashtable(struct device *d,
> + struct device_attribute *attr,
> + char *buf)
> +{
> + int count = 0;
> + struct bonding *bond = to_bond(d);
> + struct alb_bond_info *bond_info = &(BOND_ALB_INFO(bond));
> + struct rlb_client_info *client_info;
> + u32 hash_index;
> +
> + if (bond->params.mode != BOND_MODE_ALB)
> + return count;
> +
> + count += sprintf(buf + count, "SourceIP "
> + "DestinationIP Destination MAC DEV\n");
> +
> + spin_lock_bh(&(BOND_ALB_INFO(bond).rx_hashtbl_lock));
> +
> + hash_index = bond_info->rx_hashtbl_head;
> + for (; hash_index != RLB_NULL_INDEX; hash_index = client_info->next) {
> + client_info = &(bond_info->rx_hashtbl[hash_index]);
> +
> + count += sprintf(buf + count,
> + "%3d.%3d.%3d.%3d %3d.%3d.%3d.%3d "
> + "%02x:%02x:%02x:%02x:%02x:%02x %s\n",
Oh well, I guess you dont read Joe patches on netdev ;)
Please take a look at %pI4 and %pM
sprintf(buf + count, "%pI4 %pI4 %pM %s\n", ...)
> + client_info->ip_src & 0xff,
> + (client_info->ip_src >> 8) & 0xff,
> + (client_info->ip_src >> 16) & 0xff,
> + (client_info->ip_src >> 24) & 0xff,
> + client_info->ip_dst & 0xff,
> + (client_info->ip_dst >> 8) & 0xff,
> + (client_info->ip_dst >> 16) & 0xff,
> + (client_info->ip_dst >> 24) & 0xff,
> + client_info->mac_dst[0],
> + client_info->mac_dst[1],
> + client_info->mac_dst[2],
> + client_info->mac_dst[3],
> + client_info->mac_dst[4],
> + client_info->mac_dst[5],
> + client_info->slave->dev->name);
> + }
> +
next prev parent reply other threads:[~2010-11-30 10:10 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-11-30 10:01 [PATCH] bonding: add the sysfs interface to see RLB hash table Taku Izumi
2010-11-30 10:10 ` Eric Dumazet [this message]
2010-11-30 18:37 ` Jay Vosburgh
2010-12-01 5:09 ` Taku Izumi
2010-12-01 5:03 ` Taku Izumi
2010-11-30 22:08 ` Stephen Hemminger
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1291111829.2904.25.camel@edumazet-laptop \
--to=eric.dumazet@gmail.com \
--cc=fubar@us.ibm.com \
--cc=izumi.taku@jp.fujitsu.com \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox