* [PATCH 1/7] e1000e: cleanup: fix spacing issues
2010-12-09 2:40 [PATCH 0/7] e1000e: cleanup Asbjoern Sloth Toennesen
@ 2010-12-09 2:40 ` Asbjoern Sloth Toennesen
2010-12-09 2:40 ` Asbjoern Sloth Toennesen
` (21 subsequent siblings)
22 siblings, 0 replies; 27+ messages in thread
From: Asbjoern Sloth Toennesen @ 2010-12-09 2:40 UTC (permalink / raw)
To: Jeff Kirsher, Jeff Kirsher; +Cc: e1000-devel, netdev, linux-kernel
This patch fixes trivial spacing issues in e1000e.
Fixes 187 errors and 59 warnings reported by checkpatch.
Signed-off-by: Asbjoern Sloth Toennesen <asbjorn@asbjorn.biz>
---
drivers/net/e1000e/82571.c | 18 +++---
drivers/net/e1000e/defines.h | 32 ++++++------
drivers/net/e1000e/e1000.h | 14 +++---
drivers/net/e1000e/es2lan.c | 72 ++++++++++++------------
drivers/net/e1000e/ethtool.c | 16 +++---
drivers/net/e1000e/hw.h | 2 +-
drivers/net/e1000e/ich8lan.c | 92 ++++++++++++++++----------------
drivers/net/e1000e/lib.c | 8 ++--
drivers/net/e1000e/netdev.c | 74 +++++++++++++-------------
drivers/net/e1000e/param.c | 2 +-
drivers/net/e1000e/phy.c | 124 +++++++++++++++++++++---------------------
11 files changed, 227 insertions(+), 227 deletions(-)
diff --git a/drivers/net/e1000e/82571.c b/drivers/net/e1000e/82571.c
index 9333921..bbc73ce 100644
--- a/drivers/net/e1000e/82571.c
+++ b/drivers/net/e1000e/82571.c
@@ -1225,12 +1225,12 @@ static void e1000_initialize_hw_bits_82571(struct e1000_hw *hw)
* Ensure that DMA Dynamic Clock gating is disabled on 82571 and 82572
*/
- if ((hw->mac.type == e1000_82571) ||
- (hw->mac.type == e1000_82572)) {
- reg = er32(CTRL_EXT);
- reg &= ~E1000_CTRL_EXT_DMA_DYN_CLK_EN;
- ew32(CTRL_EXT, reg);
- }
+ if ((hw->mac.type == e1000_82571) ||
+ (hw->mac.type == e1000_82572)) {
+ reg = er32(CTRL_EXT);
+ reg &= ~E1000_CTRL_EXT_DMA_DYN_CLK_EN;
+ ew32(CTRL_EXT, reg);
+ }
/* PCI-Ex Control Registers */
@@ -1880,7 +1880,7 @@ static struct e1000_phy_operations e82_phy_ops_igp = {
.set_d0_lplu_state = e1000_set_d0_lplu_state_82571,
.set_d3_lplu_state = e1000e_set_d3_lplu_state,
.write_reg = e1000e_write_phy_reg_igp,
- .cfg_on_link_up = NULL,
+ .cfg_on_link_up = NULL,
};
static struct e1000_phy_operations e82_phy_ops_m88 = {
@@ -1898,7 +1898,7 @@ static struct e1000_phy_operations e82_phy_ops_m88 = {
.set_d0_lplu_state = e1000_set_d0_lplu_state_82571,
.set_d3_lplu_state = e1000e_set_d3_lplu_state,
.write_reg = e1000e_write_phy_reg_m88,
- .cfg_on_link_up = NULL,
+ .cfg_on_link_up = NULL,
};
static struct e1000_phy_operations e82_phy_ops_bm = {
@@ -1916,7 +1916,7 @@ static struct e1000_phy_operations e82_phy_ops_bm = {
.set_d0_lplu_state = e1000_set_d0_lplu_state_82571,
.set_d3_lplu_state = e1000e_set_d3_lplu_state,
.write_reg = e1000e_write_phy_reg_bm2,
- .cfg_on_link_up = NULL,
+ .cfg_on_link_up = NULL,
};
static struct e1000_nvm_operations e82571_nvm_ops = {
diff --git a/drivers/net/e1000e/defines.h b/drivers/net/e1000e/defines.h
index 016ea38..2b969c8 100644
--- a/drivers/net/e1000e/defines.h
+++ b/drivers/net/e1000e/defines.h
@@ -111,19 +111,19 @@
/* mask to determine if packets should be dropped due to frame errors */
#define E1000_RXD_ERR_FRAME_ERR_MASK ( \
- E1000_RXD_ERR_CE | \
- E1000_RXD_ERR_SE | \
- E1000_RXD_ERR_SEQ | \
- E1000_RXD_ERR_CXE | \
- E1000_RXD_ERR_RXE)
+ E1000_RXD_ERR_CE | \
+ E1000_RXD_ERR_SE | \
+ E1000_RXD_ERR_SEQ | \
+ E1000_RXD_ERR_CXE | \
+ E1000_RXD_ERR_RXE)
/* Same mask, but for extended and packet split descriptors */
#define E1000_RXDEXT_ERR_FRAME_ERR_MASK ( \
- E1000_RXDEXT_STATERR_CE | \
- E1000_RXDEXT_STATERR_SE | \
- E1000_RXDEXT_STATERR_SEQ | \
- E1000_RXDEXT_STATERR_CXE | \
- E1000_RXDEXT_STATERR_RXE)
+ E1000_RXDEXT_STATERR_CE | \
+ E1000_RXDEXT_STATERR_SE | \
+ E1000_RXDEXT_STATERR_SEQ | \
+ E1000_RXDEXT_STATERR_CXE | \
+ E1000_RXDEXT_STATERR_RXE)
#define E1000_RXDPS_HDRSTAT_HDRSP 0x00008000
@@ -421,11 +421,11 @@
* o LSC = Link Status Change
*/
#define IMS_ENABLE_MASK ( \
- E1000_IMS_RXT0 | \
- E1000_IMS_TXDW | \
- E1000_IMS_RXDMT0 | \
- E1000_IMS_RXSEQ | \
- E1000_IMS_LSC)
+ E1000_IMS_RXT0 | \
+ E1000_IMS_TXDW | \
+ E1000_IMS_RXDMT0 | \
+ E1000_IMS_RXSEQ | \
+ E1000_IMS_LSC)
/* Interrupt Mask Set */
#define E1000_IMS_TXDW E1000_ICR_TXDW /* Transmit desc written back */
@@ -785,7 +785,7 @@
#define PHY_PAGE_SHIFT 5
#define PHY_REG(page, reg) (((page) << PHY_PAGE_SHIFT) | \
- ((reg) & MAX_PHY_REG_ADDRESS))
+ ((reg) & MAX_PHY_REG_ADDRESS))
/*
* Bits...
diff --git a/drivers/net/e1000e/e1000.h b/drivers/net/e1000e/e1000.h
index fdc67fe..47eb0ba 100644
--- a/drivers/net/e1000e/e1000.h
+++ b/drivers/net/e1000e/e1000.h
@@ -580,12 +580,12 @@ extern s32 e1000e_get_cable_length_igp_2(struct e1000_hw *hw);
extern s32 e1000e_get_phy_info_igp(struct e1000_hw *hw);
extern s32 e1000e_read_phy_reg_igp(struct e1000_hw *hw, u32 offset, u16 *data);
extern s32 e1000e_read_phy_reg_igp_locked(struct e1000_hw *hw, u32 offset,
- u16 *data);
+ u16 *data);
extern s32 e1000e_phy_hw_reset_generic(struct e1000_hw *hw);
extern s32 e1000e_set_d3_lplu_state(struct e1000_hw *hw, bool active);
extern s32 e1000e_write_phy_reg_igp(struct e1000_hw *hw, u32 offset, u16 data);
extern s32 e1000e_write_phy_reg_igp_locked(struct e1000_hw *hw, u32 offset,
- u16 data);
+ u16 data);
extern s32 e1000e_phy_sw_reset(struct e1000_hw *hw);
extern s32 e1000e_phy_force_speed_duplex_m88(struct e1000_hw *hw);
extern s32 e1000e_get_cfg_done(struct e1000_hw *hw);
@@ -603,12 +603,12 @@ extern s32 e1000e_write_phy_reg_bm2(struct e1000_hw *hw, u32 offset, u16 data);
extern void e1000e_phy_force_speed_duplex_setup(struct e1000_hw *hw, u16 *phy_ctrl);
extern s32 e1000e_write_kmrn_reg(struct e1000_hw *hw, u32 offset, u16 data);
extern s32 e1000e_write_kmrn_reg_locked(struct e1000_hw *hw, u32 offset,
- u16 data);
+ u16 data);
extern s32 e1000e_read_kmrn_reg(struct e1000_hw *hw, u32 offset, u16 *data);
extern s32 e1000e_read_kmrn_reg_locked(struct e1000_hw *hw, u32 offset,
- u16 *data);
+ u16 *data);
extern s32 e1000e_phy_has_link_generic(struct e1000_hw *hw, u32 iterations,
- u32 usec_interval, bool *success);
+ u32 usec_interval, bool *success);
extern s32 e1000e_phy_reset_dsp(struct e1000_hw *hw);
extern void e1000_power_up_phy_copper(struct e1000_hw *hw);
extern void e1000_power_down_phy_copper(struct e1000_hw *hw);
@@ -617,10 +617,10 @@ extern s32 e1000e_write_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 data);
extern s32 e1000e_check_downshift(struct e1000_hw *hw);
extern s32 e1000_read_phy_reg_hv(struct e1000_hw *hw, u32 offset, u16 *data);
extern s32 e1000_read_phy_reg_hv_locked(struct e1000_hw *hw, u32 offset,
- u16 *data);
+ u16 *data);
extern s32 e1000_write_phy_reg_hv(struct e1000_hw *hw, u32 offset, u16 data);
extern s32 e1000_write_phy_reg_hv_locked(struct e1000_hw *hw, u32 offset,
- u16 data);
+ u16 data);
extern s32 e1000_link_stall_workaround_hv(struct e1000_hw *hw);
extern s32 e1000_copper_link_setup_82577(struct e1000_hw *hw);
extern s32 e1000_check_polarity_82577(struct e1000_hw *hw);
diff --git a/drivers/net/e1000e/es2lan.c b/drivers/net/e1000e/es2lan.c
index 24f8ac9..afed60f 100644
--- a/drivers/net/e1000e/es2lan.c
+++ b/drivers/net/e1000e/es2lan.c
@@ -114,9 +114,9 @@ static s32 e1000_cfg_kmrn_1000_80003es2lan(struct e1000_hw *hw);
static s32 e1000_cfg_kmrn_10_100_80003es2lan(struct e1000_hw *hw, u16 duplex);
static s32 e1000_cfg_on_link_up_80003es2lan(struct e1000_hw *hw);
static s32 e1000_read_kmrn_reg_80003es2lan(struct e1000_hw *hw, u32 offset,
- u16 *data);
+ u16 *data);
static s32 e1000_write_kmrn_reg_80003es2lan(struct e1000_hw *hw, u32 offset,
- u16 data);
+ u16 data);
static void e1000_power_down_phy_copper_80003es2lan(struct e1000_hw *hw);
/**
@@ -225,8 +225,8 @@ static s32 e1000_init_mac_params_80003es2lan(struct e1000_adapter *adapter)
mac->has_fwsm = true;
/* ARC supported; valid only if manageability features are enabled. */
mac->arc_subsystem_valid =
- (er32(FWSM) & E1000_FWSM_MODE_MASK)
- ? true : false;
+ (er32(FWSM) & E1000_FWSM_MODE_MASK)
+ ? true : false;
/* Adaptive IFS not supported */
mac->adaptive_ifs = false;
@@ -493,14 +493,14 @@ static s32 e1000_read_phy_reg_gg82563_80003es2lan(struct e1000_hw *hw,
udelay(200);
ret_val = e1000e_read_phy_reg_mdic(hw,
- MAX_PHY_REG_ADDRESS & offset,
- data);
+ MAX_PHY_REG_ADDRESS & offset,
+ data);
udelay(200);
} else {
ret_val = e1000e_read_phy_reg_mdic(hw,
- MAX_PHY_REG_ADDRESS & offset,
- data);
+ MAX_PHY_REG_ADDRESS & offset,
+ data);
}
e1000_release_phy_80003es2lan(hw);
@@ -564,14 +564,14 @@ static s32 e1000_write_phy_reg_gg82563_80003es2lan(struct e1000_hw *hw,
udelay(200);
ret_val = e1000e_write_phy_reg_mdic(hw,
- MAX_PHY_REG_ADDRESS & offset,
- data);
+ MAX_PHY_REG_ADDRESS & offset,
+ data);
udelay(200);
} else {
ret_val = e1000e_write_phy_reg_mdic(hw,
- MAX_PHY_REG_ADDRESS & offset,
- data);
+ MAX_PHY_REG_ADDRESS & offset,
+ data);
}
e1000_release_phy_80003es2lan(hw);
@@ -898,9 +898,9 @@ static s32 e1000_init_hw_80003es2lan(struct e1000_hw *hw)
hw->dev_spec.e80003es2lan.mdic_wa_enable = true;
ret_val = e1000_read_kmrn_reg_80003es2lan(hw,
- E1000_KMRNCTRLSTA_OFFSET >>
- E1000_KMRNCTRLSTA_OFFSET_SHIFT,
- &i);
+ E1000_KMRNCTRLSTA_OFFSET >>
+ E1000_KMRNCTRLSTA_OFFSET_SHIFT,
+ &i);
if (!ret_val) {
if ((i & E1000_KMRNCTRLSTA_OPMODE_MASK) ==
E1000_KMRNCTRLSTA_OPMODE_INBAND_MDIO)
@@ -1127,16 +1127,16 @@ static s32 e1000_setup_copper_link_80003es2lan(struct e1000_hw *hw)
* polling the phy; this fixes erroneous timeouts at 10Mbps.
*/
ret_val = e1000_write_kmrn_reg_80003es2lan(hw, GG82563_REG(0x34, 4),
- 0xFFFF);
+ 0xFFFF);
if (ret_val)
return ret_val;
ret_val = e1000_read_kmrn_reg_80003es2lan(hw, GG82563_REG(0x34, 9),
- ®_data);
+ ®_data);
if (ret_val)
return ret_val;
reg_data |= 0x3F;
ret_val = e1000_write_kmrn_reg_80003es2lan(hw, GG82563_REG(0x34, 9),
- reg_data);
+ reg_data);
if (ret_val)
return ret_val;
ret_val = e1000_read_kmrn_reg_80003es2lan(hw,
@@ -1176,7 +1176,7 @@ static s32 e1000_cfg_on_link_up_80003es2lan(struct e1000_hw *hw)
if (hw->phy.media_type == e1000_media_type_copper) {
ret_val = e1000e_get_speed_and_duplex_copper(hw, &speed,
- &duplex);
+ &duplex);
if (ret_val)
return ret_val;
@@ -1206,8 +1206,8 @@ static s32 e1000_cfg_kmrn_10_100_80003es2lan(struct e1000_hw *hw, u16 duplex)
reg_data = E1000_KMRNCTRLSTA_HD_CTRL_10_100_DEFAULT;
ret_val = e1000_write_kmrn_reg_80003es2lan(hw,
- E1000_KMRNCTRLSTA_OFFSET_HD_CTRL,
- reg_data);
+ E1000_KMRNCTRLSTA_OFFSET_HD_CTRL,
+ reg_data);
if (ret_val)
return ret_val;
@@ -1254,8 +1254,8 @@ static s32 e1000_cfg_kmrn_1000_80003es2lan(struct e1000_hw *hw)
reg_data = E1000_KMRNCTRLSTA_HD_CTRL_1000_DEFAULT;
ret_val = e1000_write_kmrn_reg_80003es2lan(hw,
- E1000_KMRNCTRLSTA_OFFSET_HD_CTRL,
- reg_data);
+ E1000_KMRNCTRLSTA_OFFSET_HD_CTRL,
+ reg_data);
if (ret_val)
return ret_val;
@@ -1303,7 +1303,7 @@ static s32 e1000_read_kmrn_reg_80003es2lan(struct e1000_hw *hw, u32 offset,
return ret_val;
kmrnctrlsta = ((offset << E1000_KMRNCTRLSTA_OFFSET_SHIFT) &
- E1000_KMRNCTRLSTA_OFFSET) | E1000_KMRNCTRLSTA_REN;
+ E1000_KMRNCTRLSTA_OFFSET) | E1000_KMRNCTRLSTA_REN;
ew32(KMRNCTRLSTA, kmrnctrlsta);
udelay(2);
@@ -1337,7 +1337,7 @@ static s32 e1000_write_kmrn_reg_80003es2lan(struct e1000_hw *hw, u32 offset,
return ret_val;
kmrnctrlsta = ((offset << E1000_KMRNCTRLSTA_OFFSET_SHIFT) &
- E1000_KMRNCTRLSTA_OFFSET) | data;
+ E1000_KMRNCTRLSTA_OFFSET) | data;
ew32(KMRNCTRLSTA, kmrnctrlsta);
udelay(2);
@@ -1457,18 +1457,18 @@ static struct e1000_phy_operations es2_phy_ops = {
.acquire = e1000_acquire_phy_80003es2lan,
.check_polarity = e1000_check_polarity_m88,
.check_reset_block = e1000e_check_reset_block_generic,
- .commit = e1000e_phy_sw_reset,
- .force_speed_duplex = e1000_phy_force_speed_duplex_80003es2lan,
- .get_cfg_done = e1000_get_cfg_done_80003es2lan,
- .get_cable_length = e1000_get_cable_length_80003es2lan,
- .get_info = e1000e_get_phy_info_m88,
- .read_reg = e1000_read_phy_reg_gg82563_80003es2lan,
+ .commit = e1000e_phy_sw_reset,
+ .force_speed_duplex = e1000_phy_force_speed_duplex_80003es2lan,
+ .get_cfg_done = e1000_get_cfg_done_80003es2lan,
+ .get_cable_length = e1000_get_cable_length_80003es2lan,
+ .get_info = e1000e_get_phy_info_m88,
+ .read_reg = e1000_read_phy_reg_gg82563_80003es2lan,
.release = e1000_release_phy_80003es2lan,
- .reset = e1000e_phy_hw_reset_generic,
- .set_d0_lplu_state = NULL,
- .set_d3_lplu_state = e1000e_set_d3_lplu_state,
- .write_reg = e1000_write_phy_reg_gg82563_80003es2lan,
- .cfg_on_link_up = e1000_cfg_on_link_up_80003es2lan,
+ .reset = e1000e_phy_hw_reset_generic,
+ .set_d0_lplu_state = NULL,
+ .set_d3_lplu_state = e1000e_set_d3_lplu_state,
+ .write_reg = e1000_write_phy_reg_gg82563_80003es2lan,
+ .cfg_on_link_up = e1000_cfg_on_link_up_80003es2lan,
};
static struct e1000_nvm_operations es2_nvm_ops = {
diff --git a/drivers/net/e1000e/ethtool.c b/drivers/net/e1000e/ethtool.c
index 8984d16..8acfbca 100644
--- a/drivers/net/e1000e/ethtool.c
+++ b/drivers/net/e1000e/ethtool.c
@@ -47,7 +47,7 @@ struct e1000_stats {
#define E1000_STAT(m) E1000_STATS, \
sizeof(((struct e1000_adapter *)0)->m), \
- offsetof(struct e1000_adapter, m)
+ offsetof(struct e1000_adapter, m)
#define E1000_NETDEV_STAT(m) NETDEV_STATS, \
sizeof(((struct net_device *)0)->m), \
offsetof(struct net_device, m)
@@ -187,7 +187,7 @@ static int e1000_get_settings(struct net_device *netdev,
if ((hw->phy.media_type == e1000_media_type_copper) &&
netif_carrier_ok(netdev))
ecmd->eth_tp_mdix = hw->phy.is_mdix ? ETH_TP_MDI_X :
- ETH_TP_MDI;
+ ETH_TP_MDI;
else
ecmd->eth_tp_mdix = ETH_TP_MDI_INVALID;
@@ -830,7 +830,7 @@ static int e1000_reg_test(struct e1000_adapter *adapter, u64 *data)
case e1000_80003es2lan:
toggle = 0x7FFFF3FF;
break;
- default:
+ default:
toggle = 0x7FFFF033;
break;
}
@@ -890,7 +890,7 @@ static int e1000_reg_test(struct e1000_adapter *adapter, u64 *data)
}
for (i = 0; i < mac->rar_entry_count; i++)
REG_PATTERN_TEST_ARRAY(E1000_RA, ((i << 1) + 1),
- mask, 0xFFFFFFFF);
+ mask, 0xFFFFFFFF);
for (i = 0; i < mac->mta_reg_count; i++)
REG_PATTERN_TEST_ARRAY(E1000_MTA, i, 0xFFFFFFFF, 0xFFFFFFFF);
@@ -1796,8 +1796,8 @@ static void e1000_get_wol(struct net_device *netdev,
return;
wol->supported = WAKE_UCAST | WAKE_MCAST |
- WAKE_BCAST | WAKE_MAGIC |
- WAKE_PHY | WAKE_ARP;
+ WAKE_BCAST | WAKE_MAGIC |
+ WAKE_PHY | WAKE_ARP;
/* apply any specific unsupported masks here */
if (adapter->flags & FLAG_NO_WAKE_UCAST) {
@@ -1830,7 +1830,7 @@ static int e1000_set_wol(struct net_device *netdev,
if (!(adapter->flags & FLAG_HAS_WOL) ||
!device_can_wakeup(&adapter->pdev->dev) ||
(wol->wolopts & ~(WAKE_UCAST | WAKE_MCAST | WAKE_BCAST |
- WAKE_MAGIC | WAKE_PHY | WAKE_ARP)))
+ WAKE_MAGIC | WAKE_PHY | WAKE_ARP)))
return -EOPNOTSUPP;
/* these settings will always override what we currently have */
@@ -1863,7 +1863,7 @@ static int e1000_set_wol(struct net_device *netdev,
static void e1000e_led_blink_task(struct work_struct *work)
{
struct e1000_adapter *adapter = container_of(work,
- struct e1000_adapter, led_blink_task);
+ struct e1000_adapter, led_blink_task);
if (test_and_change_bit(E1000_LED_ON, &adapter->led_status))
adapter->hw.mac.ops.led_off(&adapter->hw);
diff --git a/drivers/net/e1000e/hw.h b/drivers/net/e1000e/hw.h
index ba302a5..0a319e1 100644
--- a/drivers/net/e1000e/hw.h
+++ b/drivers/net/e1000e/hw.h
@@ -37,7 +37,7 @@ struct e1000_adapter;
#include "defines.h"
#define er32(reg) __er32(hw, E1000_##reg)
-#define ew32(reg,val) __ew32(hw, E1000_##reg, (val))
+#define ew32(reg, val) __ew32(hw, E1000_##reg, (val))
#define e1e_flush() er32(STATUS)
#define E1000_WRITE_REG_ARRAY(a, reg, offset, value) \
diff --git a/drivers/net/e1000e/ich8lan.c b/drivers/net/e1000e/ich8lan.c
index e3374d9..53edfd4 100644
--- a/drivers/net/e1000e/ich8lan.c
+++ b/drivers/net/e1000e/ich8lan.c
@@ -267,8 +267,8 @@ static inline void __ew32flash(struct e1000_hw *hw, unsigned long reg, u32 val)
#define er16flash(reg) __er16flash(hw, (reg))
#define er32flash(reg) __er32flash(hw, (reg))
-#define ew16flash(reg,val) __ew16flash(hw, (reg), (val))
-#define ew32flash(reg,val) __ew32flash(hw, (reg), (val))
+#define ew16flash(reg, val) __ew16flash(hw, (reg), (val))
+#define ew32flash(reg, val) __ew32flash(hw, (reg), (val))
/**
* e1000_init_phy_params_pchlan - Initialize PHY function pointers
@@ -1098,46 +1098,46 @@ static s32 e1000_k1_gig_workaround_hv(struct e1000_hw *hw, bool link)
if (link) {
if (hw->phy.type == e1000_phy_82578) {
ret_val = hw->phy.ops.read_reg_locked(hw, BM_CS_STATUS,
- &status_reg);
+ &status_reg);
if (ret_val)
goto release;
status_reg &= BM_CS_STATUS_LINK_UP |
- BM_CS_STATUS_RESOLVED |
- BM_CS_STATUS_SPEED_MASK;
+ BM_CS_STATUS_RESOLVED |
+ BM_CS_STATUS_SPEED_MASK;
if (status_reg == (BM_CS_STATUS_LINK_UP |
- BM_CS_STATUS_RESOLVED |
- BM_CS_STATUS_SPEED_1000))
+ BM_CS_STATUS_RESOLVED |
+ BM_CS_STATUS_SPEED_1000))
k1_enable = false;
}
if (hw->phy.type == e1000_phy_82577) {
ret_val = hw->phy.ops.read_reg_locked(hw, HV_M_STATUS,
- &status_reg);
+ &status_reg);
if (ret_val)
goto release;
status_reg &= HV_M_STATUS_LINK_UP |
- HV_M_STATUS_AUTONEG_COMPLETE |
- HV_M_STATUS_SPEED_MASK;
+ HV_M_STATUS_AUTONEG_COMPLETE |
+ HV_M_STATUS_SPEED_MASK;
if (status_reg == (HV_M_STATUS_LINK_UP |
- HV_M_STATUS_AUTONEG_COMPLETE |
- HV_M_STATUS_SPEED_1000))
+ HV_M_STATUS_AUTONEG_COMPLETE |
+ HV_M_STATUS_SPEED_1000))
k1_enable = false;
}
/* Link stall fix for link up */
ret_val = hw->phy.ops.write_reg_locked(hw, PHY_REG(770, 19),
- 0x0100);
+ 0x0100);
if (ret_val)
goto release;
} else {
/* Link stall fix for link down */
ret_val = hw->phy.ops.write_reg_locked(hw, PHY_REG(770, 19),
- 0x4100);
+ 0x4100);
if (ret_val)
goto release;
}
@@ -1169,8 +1169,8 @@ s32 e1000_configure_k1_ich8lan(struct e1000_hw *hw, bool k1_enable)
u16 kmrn_reg = 0;
ret_val = e1000e_read_kmrn_reg_locked(hw,
- E1000_KMRNCTRLSTA_K1_CONFIG,
- &kmrn_reg);
+ E1000_KMRNCTRLSTA_K1_CONFIG,
+ &kmrn_reg);
if (ret_val)
goto out;
@@ -1180,8 +1180,8 @@ s32 e1000_configure_k1_ich8lan(struct e1000_hw *hw, bool k1_enable)
kmrn_reg &= ~E1000_KMRNCTRLSTA_K1_ENABLE;
ret_val = e1000e_write_kmrn_reg_locked(hw,
- E1000_KMRNCTRLSTA_K1_CONFIG,
- kmrn_reg);
+ E1000_KMRNCTRLSTA_K1_CONFIG,
+ kmrn_reg);
if (ret_val)
goto out;
@@ -1356,13 +1356,13 @@ static s32 e1000_hv_phy_workarounds_ich8lan(struct e1000_hw *hw)
if (ret_val)
goto out;
ret_val = hw->phy.ops.read_reg_locked(hw,
- PHY_REG(BM_PORT_CTRL_PAGE, 17),
- &phy_data);
+ PHY_REG(BM_PORT_CTRL_PAGE, 17),
+ &phy_data);
if (ret_val)
goto release;
ret_val = hw->phy.ops.write_reg_locked(hw,
- PHY_REG(BM_PORT_CTRL_PAGE, 17),
- phy_data & 0x00FF);
+ PHY_REG(BM_PORT_CTRL_PAGE, 17),
+ phy_data & 0x00FF);
release:
hw->phy.ops.release(hw);
out:
@@ -2015,7 +2015,7 @@ static s32 e1000_valid_nvm_bank_detect_ich8lan(struct e1000_hw *hw, u32 *bank)
/* Check bank 0 */
ret_val = e1000_read_flash_byte_ich8lan(hw, act_offset,
- &sig_byte);
+ &sig_byte);
if (ret_val)
return ret_val;
if ((sig_byte & E1000_ICH_NVM_VALID_SIG_MASK) ==
@@ -2026,8 +2026,8 @@ static s32 e1000_valid_nvm_bank_detect_ich8lan(struct e1000_hw *hw, u32 *bank)
/* Check bank 1 */
ret_val = e1000_read_flash_byte_ich8lan(hw, act_offset +
- bank1_offset,
- &sig_byte);
+ bank1_offset,
+ &sig_byte);
if (ret_val)
return ret_val;
if ((sig_byte & E1000_ICH_NVM_VALID_SIG_MASK) ==
@@ -2428,8 +2428,8 @@ static s32 e1000_update_nvm_checksum_ich8lan(struct e1000_hw *hw)
data = dev_spec->shadow_ram[i].value;
} else {
ret_val = e1000_read_flash_word_ich8lan(hw, i +
- old_bank_offset,
- &data);
+ old_bank_offset,
+ &data);
if (ret_val)
break;
}
@@ -2640,7 +2640,7 @@ static s32 e1000_write_flash_data_ich8lan(struct e1000_hw *hw, u32 offset,
hsflctl.regval = er16flash(ICH_FLASH_HSFCTL);
/* 0b/1b corresponds to 1 or 2 byte size, respectively. */
- hsflctl.hsf_ctrl.fldbcount = size -1;
+ hsflctl.hsf_ctrl.fldbcount = size - 1;
hsflctl.hsf_ctrl.flcycle = ICH_CYCLE_WRITE;
ew16flash(ICH_FLASH_HSFCTL, hsflctl.regval);
@@ -3272,8 +3272,8 @@ static s32 e1000_setup_link_ich8lan(struct e1000_hw *hw)
ew32(FCRTV_PCH, hw->fc.refresh_time);
ret_val = hw->phy.ops.write_reg(hw,
- PHY_REG(BM_PORT_CTRL_PAGE, 27),
- hw->fc.pause_time);
+ PHY_REG(BM_PORT_CTRL_PAGE, 27),
+ hw->fc.pause_time);
if (ret_val)
return ret_val;
}
@@ -3309,12 +3309,12 @@ static s32 e1000_setup_copper_link_ich8lan(struct e1000_hw *hw)
if (ret_val)
return ret_val;
ret_val = e1000e_read_kmrn_reg(hw, E1000_KMRNCTRLSTA_INBAND_PARAM,
- ®_data);
+ ®_data);
if (ret_val)
return ret_val;
reg_data |= 0x3F;
ret_val = e1000e_write_kmrn_reg(hw, E1000_KMRNCTRLSTA_INBAND_PARAM,
- reg_data);
+ reg_data);
if (ret_val)
return ret_val;
@@ -3338,7 +3338,7 @@ static s32 e1000_setup_copper_link_ich8lan(struct e1000_hw *hw)
break;
case e1000_phy_ife:
ret_val = hw->phy.ops.read_reg(hw, IFE_PHY_MDIX_CONTROL,
- ®_data);
+ ®_data);
if (ret_val)
return ret_val;
@@ -3357,7 +3357,7 @@ static s32 e1000_setup_copper_link_ich8lan(struct e1000_hw *hw)
break;
}
ret_val = hw->phy.ops.write_reg(hw, IFE_PHY_MDIX_CONTROL,
- reg_data);
+ reg_data);
if (ret_val)
return ret_val;
break;
@@ -3857,21 +3857,21 @@ static void e1000_clear_hw_cntrs_ich8lan(struct e1000_hw *hw)
}
static struct e1000_mac_operations ich8_mac_ops = {
- .id_led_init = e1000e_id_led_init,
+ .id_led_init = e1000e_id_led_init,
/* check_mng_mode dependent on mac type */
- .check_for_link = e1000_check_for_copper_link_ich8lan,
+ .check_for_link = e1000_check_for_copper_link_ich8lan,
/* cleanup_led dependent on mac type */
- .clear_hw_cntrs = e1000_clear_hw_cntrs_ich8lan,
- .get_bus_info = e1000_get_bus_info_ich8lan,
- .set_lan_id = e1000_set_lan_id_single_port,
- .get_link_up_info = e1000_get_link_up_info_ich8lan,
+ .clear_hw_cntrs = e1000_clear_hw_cntrs_ich8lan,
+ .get_bus_info = e1000_get_bus_info_ich8lan,
+ .set_lan_id = e1000_set_lan_id_single_port,
+ .get_link_up_info = e1000_get_link_up_info_ich8lan,
/* led_on dependent on mac type */
/* led_off dependent on mac type */
- .update_mc_addr_list = e1000e_update_mc_addr_list_generic,
- .reset_hw = e1000_reset_hw_ich8lan,
- .init_hw = e1000_init_hw_ich8lan,
- .setup_link = e1000_setup_link_ich8lan,
- .setup_physical_interface= e1000_setup_copper_link_ich8lan,
+ .update_mc_addr_list = e1000e_update_mc_addr_list_generic,
+ .reset_hw = e1000_reset_hw_ich8lan,
+ .init_hw = e1000_init_hw_ich8lan,
+ .setup_link = e1000_setup_link_ich8lan,
+ .setup_physical_interface = e1000_setup_copper_link_ich8lan,
/* id_led_init dependent on mac type */
};
@@ -3891,7 +3891,7 @@ static struct e1000_phy_operations ich8_phy_ops = {
static struct e1000_nvm_operations ich8_nvm_ops = {
.acquire = e1000_acquire_nvm_ich8lan,
- .read = e1000_read_nvm_ich8lan,
+ .read = e1000_read_nvm_ich8lan,
.release = e1000_release_nvm_ich8lan,
.update = e1000_update_nvm_checksum_ich8lan,
.valid_led_default = e1000_valid_led_default_ich8lan,
diff --git a/drivers/net/e1000e/lib.c b/drivers/net/e1000e/lib.c
index 0fd4eb5..20870b2 100644
--- a/drivers/net/e1000e/lib.c
+++ b/drivers/net/e1000e/lib.c
@@ -194,7 +194,7 @@ s32 e1000_check_alt_mac_addr_generic(struct e1000_hw *hw)
goto out;
ret_val = e1000_read_nvm(hw, NVM_ALT_MAC_ADDR_PTR, 1,
- &nvm_alt_mac_addr_offset);
+ &nvm_alt_mac_addr_offset);
if (ret_val) {
e_dbg("NVM Read Error\n");
goto out;
@@ -1505,10 +1505,10 @@ s32 e1000e_setup_led_generic(struct e1000_hw *hw)
hw->mac.ledctl_default = ledctl;
/* Turn off LED0 */
ledctl &= ~(E1000_LEDCTL_LED0_IVRT |
- E1000_LEDCTL_LED0_BLINK |
- E1000_LEDCTL_LED0_MODE_MASK);
+ E1000_LEDCTL_LED0_BLINK |
+ E1000_LEDCTL_LED0_MODE_MASK);
ledctl |= (E1000_LEDCTL_MODE_LED_OFF <<
- E1000_LEDCTL_LED0_MODE_SHIFT);
+ E1000_LEDCTL_LED0_MODE_SHIFT);
ew32(LEDCTL, ledctl);
} else if (hw->phy.media_type == e1000_media_type_copper) {
ew32(LEDCTL, hw->mac.ledctl_mode1);
diff --git a/drivers/net/e1000e/netdev.c b/drivers/net/e1000e/netdev.c
index 0adcb79..820ea48 100644
--- a/drivers/net/e1000e/netdev.c
+++ b/drivers/net/e1000e/netdev.c
@@ -682,7 +682,7 @@ no_buffers:
**/
static void e1000_alloc_jumbo_rx_buffers(struct e1000_adapter *adapter,
- int cleaned_count)
+ int cleaned_count)
{
struct net_device *netdev = adapter->netdev;
struct pci_dev *pdev = adapter->pdev;
@@ -723,8 +723,8 @@ check_page:
if (!buffer_info->dma)
buffer_info->dma = dma_map_page(&pdev->dev,
- buffer_info->page, 0,
- PAGE_SIZE,
+ buffer_info->page, 0,
+ PAGE_SIZE,
DMA_FROM_DEVICE);
rx_desc = E1000_RX_DESC(*rx_ring, i);
@@ -921,8 +921,8 @@ static void e1000_put_txbuf(struct e1000_adapter *adapter,
static void e1000_print_hw_hang(struct work_struct *work)
{
struct e1000_adapter *adapter = container_of(work,
- struct e1000_adapter,
- print_hang_task);
+ struct e1000_adapter,
+ print_hang_task);
struct e1000_ring *tx_ring = adapter->tx_ring;
unsigned int i = tx_ring->next_to_clean;
unsigned int eop = tx_ring->buffer_info[i].next_to_watch;
@@ -1249,7 +1249,7 @@ next_desc:
* e1000_consume_page - helper function
**/
static void e1000_consume_page(struct e1000_buffer *bi, struct sk_buff *skb,
- u16 length)
+ u16 length)
{
bi->page = NULL;
skb->len += length;
@@ -1266,7 +1266,7 @@ static void e1000_consume_page(struct e1000_buffer *bi, struct sk_buff *skb,
**/
static bool e1000_clean_jumbo_rx_irq(struct e1000_adapter *adapter,
- int *work_done, int work_to_do)
+ int *work_done, int work_to_do)
{
struct net_device *netdev = adapter->netdev;
struct pci_dev *pdev = adapter->pdev;
@@ -1277,7 +1277,7 @@ static bool e1000_clean_jumbo_rx_irq(struct e1000_adapter *adapter,
unsigned int i;
int cleaned_count = 0;
bool cleaned = false;
- unsigned int total_rx_bytes=0, total_rx_packets=0;
+ unsigned int total_rx_bytes = 0, total_rx_packets = 0;
i = rx_ring->next_to_clean;
rx_desc = E1000_RX_DESC(*rx_ring, i);
@@ -1332,7 +1332,7 @@ static bool e1000_clean_jumbo_rx_irq(struct e1000_adapter *adapter,
/* this is the beginning of a chain */
rxtop = skb;
skb_fill_page_desc(rxtop, 0, buffer_info->page,
- 0, length);
+ 0, length);
} else {
/* this is the middle of a chain */
skb_fill_page_desc(rxtop,
@@ -1362,29 +1362,29 @@ static bool e1000_clean_jumbo_rx_irq(struct e1000_adapter *adapter,
skb_tailroom(skb) >= length) {
u8 *vaddr;
vaddr = kmap_atomic(buffer_info->page,
- KM_SKB_DATA_SOFTIRQ);
+ KM_SKB_DATA_SOFTIRQ);
memcpy(skb_tail_pointer(skb), vaddr,
length);
kunmap_atomic(vaddr,
- KM_SKB_DATA_SOFTIRQ);
+ KM_SKB_DATA_SOFTIRQ);
/* re-use the page, so don't erase
* buffer_info->page */
skb_put(skb, length);
} else {
skb_fill_page_desc(skb, 0,
- buffer_info->page, 0,
- length);
+ buffer_info->page, 0,
+ length);
e1000_consume_page(buffer_info, skb,
- length);
+ length);
}
}
}
/* Receive Checksum Offload XXX recompute due to CRC strip? */
e1000_rx_checksum(adapter,
- (u32)(status) |
- ((u32)(rx_desc->errors) << 24),
- le16_to_cpu(rx_desc->csum), skb);
+ (u32)(status) |
+ ((u32)(rx_desc->errors) << 24),
+ le16_to_cpu(rx_desc->csum), skb);
/* probably a little skewed due to removing CRC */
total_rx_bytes += skb->len;
@@ -1398,7 +1398,7 @@ static bool e1000_clean_jumbo_rx_irq(struct e1000_adapter *adapter,
}
e1000_receive_skb(adapter, netdev, skb, status,
- rx_desc->special);
+ rx_desc->special);
next_desc:
rx_desc->status = 0;
@@ -1448,7 +1448,7 @@ static void e1000_clean_rx_ring(struct e1000_adapter *adapter)
DMA_FROM_DEVICE);
else if (adapter->clean_rx == e1000_clean_jumbo_rx_irq)
dma_unmap_page(&pdev->dev, buffer_info->dma,
- PAGE_SIZE,
+ PAGE_SIZE,
DMA_FROM_DEVICE);
else if (adapter->clean_rx == e1000_clean_rx_irq_ps)
dma_unmap_single(&pdev->dev, buffer_info->dma,
@@ -4034,11 +4034,11 @@ static void e1000_print_link_info(struct e1000_adapter *adapter)
adapter->netdev->name,
adapter->link_speed,
(adapter->link_duplex == FULL_DUPLEX) ?
- "Full Duplex" : "Half Duplex",
+ "Full Duplex" : "Half Duplex",
((ctrl & E1000_CTRL_TFCE) && (ctrl & E1000_CTRL_RFCE)) ?
- "RX/TX" :
+ "RX/TX" :
((ctrl & E1000_CTRL_RFCE) ? "RX" :
- ((ctrl & E1000_CTRL_TFCE) ? "TX" : "None" )));
+ ((ctrl & E1000_CTRL_TFCE) ? "TX" : "None")));
}
static bool e1000e_has_link(struct e1000_adapter *adapter)
@@ -4243,7 +4243,7 @@ static void e1000_watchdog_task(struct work_struct *work)
tctl |= E1000_TCTL_EN;
ew32(TCTL, tctl);
- /*
+ /*
* Perform any post-link-up configuration before
* reporting link up.
*/
@@ -4394,14 +4394,14 @@ static int e1000_tso(struct e1000_adapter *adapter,
iph->tot_len = 0;
iph->check = 0;
tcp_hdr(skb)->check = ~csum_tcpudp_magic(iph->saddr, iph->daddr,
- 0, IPPROTO_TCP, 0);
+ 0, IPPROTO_TCP, 0);
cmd_length = E1000_TXD_CMD_IP;
ipcse = skb_transport_offset(skb) - 1;
} else if (skb_is_gso_v6(skb)) {
ipv6_hdr(skb)->payload_len = 0;
tcp_hdr(skb)->check = ~csum_ipv6_magic(&ipv6_hdr(skb)->saddr,
- &ipv6_hdr(skb)->daddr,
- 0, IPPROTO_TCP, 0);
+ &ipv6_hdr(skb)->daddr,
+ 0, IPPROTO_TCP, 0);
ipcse = 0;
}
ipcss = skb_network_offset(skb);
@@ -4411,7 +4411,7 @@ static int e1000_tso(struct e1000_adapter *adapter,
tucse = 0;
cmd_length |= (E1000_TXD_CMD_DEXT | E1000_TXD_CMD_TSE |
- E1000_TXD_CMD_TCP | (skb->len - (hdr_len)));
+ E1000_TXD_CMD_TCP | (skb->len - (hdr_len)));
i = tx_ring->next_to_use;
context_desc = E1000_CONTEXT_DESC(*tx_ring, i);
@@ -4589,7 +4589,7 @@ dma_error:
count--;
while (count--) {
- if (i==0)
+ if (i == 0)
i += tx_ring->count;
i--;
buffer_info = &tx_ring->buffer_info[i];
@@ -4734,7 +4734,7 @@ static int e1000_maybe_stop_tx(struct net_device *netdev, int size)
return __e1000_maybe_stop_tx(netdev, size);
}
-#define TXD_USE_COUNT(S, X) (((S) >> (X)) + 1 )
+#define TXD_USE_COUNT(S, X) (((S) >> (X)) + 1)
static netdev_tx_t e1000_xmit_frame(struct sk_buff *skb,
struct net_device *netdev)
{
@@ -5105,7 +5105,7 @@ static int e1000_init_phy_wakeup(struct e1000_adapter *adapter, u32 wufc)
return retval;
}
e1000e_write_phy_reg_mdic(hw, IGP01E1000_PHY_PAGE_SELECT,
- (BM_WUC_ENABLE_PAGE << IGP_PAGE_SHIFT));
+ (BM_WUC_ENABLE_PAGE << IGP_PAGE_SHIFT));
retval = e1000e_read_phy_reg_mdic(hw, BM_WUC_ENABLE_REG, &phy_reg);
if (retval) {
e_err("Could not read PHY page 769\n");
@@ -5233,7 +5233,7 @@ static void e1000_power_off(struct pci_dev *pdev, bool sleep, bool wake)
}
static void e1000_complete_shutdown(struct pci_dev *pdev, bool sleep,
- bool wake)
+ bool wake)
{
struct net_device *netdev = pci_get_drvdata(pdev);
struct e1000_adapter *adapter = netdev_priv(netdev);
@@ -5251,7 +5251,7 @@ static void e1000_complete_shutdown(struct pci_dev *pdev, bool sleep,
pci_read_config_word(us_dev, pos + PCI_EXP_DEVCTL, &devctl);
pci_write_config_word(us_dev, pos + PCI_EXP_DEVCTL,
- (devctl & ~PCI_EXP_DEVCTL_CERE));
+ (devctl & ~PCI_EXP_DEVCTL_CERE));
e1000_power_off(pdev, sleep, wake);
@@ -5632,7 +5632,7 @@ static void e1000_print_device_info(struct e1000_adapter *adapter)
e_info("(PCI Express:2.5GB/s:%s) %pM\n",
/* bus width */
((hw->bus.width == e1000_bus_width_pcie_x4) ? "Width x4" :
- "Width x1"),
+ "Width x1"),
/* MAC address */
netdev->dev_addr);
e_info("Intel(R) PRO/%s Network Connection\n",
@@ -5732,8 +5732,8 @@ static int __devinit e1000_probe(struct pci_dev *pdev,
}
err = pci_request_selected_regions_exclusive(pdev,
- pci_select_bars(pdev, IORESOURCE_MEM),
- e1000e_driver_name);
+ pci_select_bars(pdev, IORESOURCE_MEM),
+ e1000e_driver_name);
if (err)
goto err_pci_reg;
@@ -6000,7 +6000,7 @@ err_ioremap:
free_netdev(netdev);
err_alloc_etherdev:
pci_release_selected_regions(pdev,
- pci_select_bars(pdev, IORESOURCE_MEM));
+ pci_select_bars(pdev, IORESOURCE_MEM));
err_pci_reg:
err_dma:
pci_disable_device(pdev);
@@ -6063,7 +6063,7 @@ static void __devexit e1000_remove(struct pci_dev *pdev)
if (adapter->hw.flash_address)
iounmap(adapter->hw.flash_address);
pci_release_selected_regions(pdev,
- pci_select_bars(pdev, IORESOURCE_MEM));
+ pci_select_bars(pdev, IORESOURCE_MEM));
free_netdev(netdev);
diff --git a/drivers/net/e1000e/param.c b/drivers/net/e1000e/param.c
index 3d36911..2687295 100644
--- a/drivers/net/e1000e/param.c
+++ b/drivers/net/e1000e/param.c
@@ -157,7 +157,7 @@ E1000_PARAM(WriteProtectNVM, "Write-protect NVM [WARNING: disabling this can lea
* Default Value: 1 (enabled)
*/
E1000_PARAM(CrcStripping, "Enable CRC Stripping, disable if your BMC needs " \
- "the CRC");
+ "the CRC");
struct e1000_option {
enum { enable_option, range_option, list_option } type;
diff --git a/drivers/net/e1000e/phy.c b/drivers/net/e1000e/phy.c
index 3d3dc0c..a26c296 100644
--- a/drivers/net/e1000e/phy.c
+++ b/drivers/net/e1000e/phy.c
@@ -39,7 +39,7 @@ static s32 e1000_access_phy_wakeup_reg_bm(struct e1000_hw *hw, u32 offset,
u16 *data, bool read);
static u32 e1000_get_phy_addr_for_hv_page(u32 page);
static s32 e1000_access_phy_debug_regs_hv(struct e1000_hw *hw, u32 offset,
- u16 *data, bool read);
+ u16 *data, bool read);
/* Cable length tables */
static const u16 e1000_m88_cable_length_table[] =
@@ -345,7 +345,7 @@ s32 e1000e_write_phy_reg_m88(struct e1000_hw *hw, u32 offset, u16 data)
* semaphores before exiting.
**/
static s32 __e1000e_read_phy_reg_igp(struct e1000_hw *hw, u32 offset, u16 *data,
- bool locked)
+ bool locked)
{
s32 ret_val = 0;
@@ -367,7 +367,7 @@ static s32 __e1000e_read_phy_reg_igp(struct e1000_hw *hw, u32 offset, u16 *data,
}
ret_val = e1000e_read_phy_reg_mdic(hw, MAX_PHY_REG_ADDRESS & offset,
- data);
+ data);
release:
if (!locked)
@@ -416,7 +416,7 @@ s32 e1000e_read_phy_reg_igp_locked(struct e1000_hw *hw, u32 offset, u16 *data)
* at the offset. Release any acquired semaphores before exiting.
**/
static s32 __e1000e_write_phy_reg_igp(struct e1000_hw *hw, u32 offset, u16 data,
- bool locked)
+ bool locked)
{
s32 ret_val = 0;
@@ -488,7 +488,7 @@ s32 e1000e_write_phy_reg_igp_locked(struct e1000_hw *hw, u32 offset, u16 data)
* Release any acquired semaphores before exiting.
**/
static s32 __e1000_read_kmrn_reg(struct e1000_hw *hw, u32 offset, u16 *data,
- bool locked)
+ bool locked)
{
u32 kmrnctrlsta;
s32 ret_val = 0;
@@ -560,7 +560,7 @@ s32 e1000e_read_kmrn_reg_locked(struct e1000_hw *hw, u32 offset, u16 *data)
* before exiting.
**/
static s32 __e1000_write_kmrn_reg(struct e1000_hw *hw, u32 offset, u16 data,
- bool locked)
+ bool locked)
{
u32 kmrnctrlsta;
s32 ret_val = 0;
@@ -761,7 +761,7 @@ s32 e1000e_copper_link_setup_m88(struct e1000_hw *hw)
if (phy->type == e1000_phy_82578) {
ret_val = phy->ops.read_reg(hw, M88E1000_EXT_PHY_SPEC_CTRL,
- &phy_data);
+ &phy_data);
if (ret_val)
return ret_val;
@@ -769,7 +769,7 @@ s32 e1000e_copper_link_setup_m88(struct e1000_hw *hw)
phy_data |= I82578_EPSCR_DOWNSHIFT_ENABLE;
phy_data &= ~I82578_EPSCR_DOWNSHIFT_COUNTER_MASK;
ret_val = phy->ops.write_reg(hw, M88E1000_EXT_PHY_SPEC_CTRL,
- phy_data);
+ phy_data);
if (ret_val)
return ret_val;
}
@@ -1400,9 +1400,9 @@ s32 e1000_phy_force_speed_duplex_ife(struct e1000_hw *hw)
e_dbg("Waiting for forced speed/duplex link on IFE phy.\n");
ret_val = e1000e_phy_has_link_generic(hw,
- PHY_FORCE_LIMIT,
- 100000,
- &link);
+ PHY_FORCE_LIMIT,
+ 100000,
+ &link);
if (ret_val)
goto out;
@@ -1411,9 +1411,9 @@ s32 e1000_phy_force_speed_duplex_ife(struct e1000_hw *hw)
/* Try once more */
ret_val = e1000e_phy_has_link_generic(hw,
- PHY_FORCE_LIMIT,
- 100000,
- &link);
+ PHY_FORCE_LIMIT,
+ 100000,
+ &link);
if (ret_val)
goto out;
}
@@ -1698,8 +1698,8 @@ s32 e1000_check_polarity_ife(struct e1000_hw *hw)
if (!ret_val)
phy->cable_polarity = (phy_data & mask)
- ? e1000_rev_polarity_reversed
- : e1000_rev_polarity_normal;
+ ? e1000_rev_polarity_reversed
+ : e1000_rev_polarity_normal;
return ret_val;
}
@@ -1807,7 +1807,7 @@ s32 e1000e_get_cable_length_m88(struct e1000_hw *hw)
goto out;
index = (phy_data & M88E1000_PSSR_CABLE_LENGTH) >>
- M88E1000_PSSR_CABLE_LENGTH_SHIFT;
+ M88E1000_PSSR_CABLE_LENGTH_SHIFT;
if (index >= M88E1000_CABLE_LENGTH_TABLE_SIZE - 1) {
ret_val = -E1000_ERR_PHY;
goto out;
@@ -2055,7 +2055,7 @@ s32 e1000_get_phy_info_ife(struct e1000_hw *hw)
if (ret_val)
goto out;
phy->polarity_correction = (data & IFE_PSC_AUTO_POLARITY_DISABLE)
- ? false : true;
+ ? false : true;
if (phy->polarity_correction) {
ret_val = e1000_check_polarity_ife(hw);
@@ -2064,8 +2064,8 @@ s32 e1000_get_phy_info_ife(struct e1000_hw *hw)
} else {
/* Polarity is forced */
phy->cable_polarity = (data & IFE_PSC_FORCE_POLARITY)
- ? e1000_rev_polarity_reversed
- : e1000_rev_polarity_normal;
+ ? e1000_rev_polarity_reversed
+ : e1000_rev_polarity_normal;
}
ret_val = e1e_rphy(hw, IFE_PHY_MDIX_CONTROL, &data);
@@ -2432,13 +2432,13 @@ s32 e1000e_write_phy_reg_bm(struct e1000_hw *hw, u32 offset, u16 data)
/* Page is shifted left, PHY expects (page x 32) */
ret_val = e1000e_write_phy_reg_mdic(hw, page_select,
- (page << page_shift));
+ (page << page_shift));
if (ret_val)
goto out;
}
ret_val = e1000e_write_phy_reg_mdic(hw, MAX_PHY_REG_ADDRESS & offset,
- data);
+ data);
out:
hw->phy.ops.release(hw);
@@ -2491,13 +2491,13 @@ s32 e1000e_read_phy_reg_bm(struct e1000_hw *hw, u32 offset, u16 *data)
/* Page is shifted left, PHY expects (page x 32) */
ret_val = e1000e_write_phy_reg_mdic(hw, page_select,
- (page << page_shift));
+ (page << page_shift));
if (ret_val)
goto out;
}
ret_val = e1000e_read_phy_reg_mdic(hw, MAX_PHY_REG_ADDRESS & offset,
- data);
+ data);
out:
hw->phy.ops.release(hw);
return ret_val;
@@ -2628,7 +2628,7 @@ static s32 e1000_access_phy_wakeup_reg_bm(struct e1000_hw *hw, u32 offset,
/* Set page 769 */
e1000e_write_phy_reg_mdic(hw, IGP01E1000_PHY_PAGE_SELECT,
- (BM_WUC_ENABLE_PAGE << IGP_PAGE_SHIFT));
+ (BM_WUC_ENABLE_PAGE << IGP_PAGE_SHIFT));
ret_val = e1000e_read_phy_reg_mdic(hw, BM_WUC_ENABLE_REG, &phy_reg);
if (ret_val) {
@@ -2646,7 +2646,7 @@ static s32 e1000_access_phy_wakeup_reg_bm(struct e1000_hw *hw, u32 offset,
/* Write bit 2 = 1, and clear bit 4 to 769_17 */
ret_val = e1000e_write_phy_reg_mdic(hw, BM_WUC_ENABLE_REG,
- phy_reg | BM_WUC_ENABLE_BIT);
+ phy_reg | BM_WUC_ENABLE_BIT);
if (ret_val) {
e_dbg("Could not write PHY page 769 bit 2\n");
goto out;
@@ -2654,7 +2654,7 @@ static s32 e1000_access_phy_wakeup_reg_bm(struct e1000_hw *hw, u32 offset,
/* Select page 800 */
ret_val = e1000e_write_phy_reg_mdic(hw, IGP01E1000_PHY_PAGE_SELECT,
- (BM_WUC_PAGE << IGP_PAGE_SHIFT));
+ (BM_WUC_PAGE << IGP_PAGE_SHIFT));
/* Write the page 800 offset value using opcode 0x11 */
ret_val = e1000e_write_phy_reg_mdic(hw, BM_WUC_ADDRESS_OPCODE, reg);
@@ -2664,11 +2664,11 @@ static s32 e1000_access_phy_wakeup_reg_bm(struct e1000_hw *hw, u32 offset,
}
if (read) {
- /* Read the page 800 value using opcode 0x12 */
+ /* Read the page 800 value using opcode 0x12 */
ret_val = e1000e_read_phy_reg_mdic(hw, BM_WUC_DATA_OPCODE,
- data);
+ data);
} else {
- /* Write the page 800 value using opcode 0x12 */
+ /* Write the page 800 value using opcode 0x12 */
ret_val = e1000e_write_phy_reg_mdic(hw, BM_WUC_DATA_OPCODE,
*data);
}
@@ -2683,7 +2683,7 @@ static s32 e1000_access_phy_wakeup_reg_bm(struct e1000_hw *hw, u32 offset,
* Set page 769
*/
e1000e_write_phy_reg_mdic(hw, IGP01E1000_PHY_PAGE_SELECT,
- (BM_WUC_ENABLE_PAGE << IGP_PAGE_SHIFT));
+ (BM_WUC_ENABLE_PAGE << IGP_PAGE_SHIFT));
/* Clear 769_17.2 */
ret_val = e1000e_write_phy_reg_mdic(hw, BM_WUC_ENABLE_REG, phy_reg);
@@ -2782,7 +2782,7 @@ static s32 e1000_set_d0_lplu_state(struct e1000_hw *hw, bool active)
* semaphore before exiting.
**/
static s32 __e1000_read_phy_reg_hv(struct e1000_hw *hw, u32 offset, u16 *data,
- bool locked)
+ bool locked)
{
s32 ret_val;
u16 page = BM_PHY_REG_PAGE(offset);
@@ -2797,13 +2797,13 @@ static s32 __e1000_read_phy_reg_hv(struct e1000_hw *hw, u32 offset, u16 *data,
/* Page 800 works differently than the rest so it has its own func */
if (page == BM_WUC_PAGE) {
ret_val = e1000_access_phy_wakeup_reg_bm(hw, offset,
- data, true);
+ data, true);
goto out;
}
if (page > 0 && page < HV_INTC_FC_PAGE_START) {
ret_val = e1000_access_phy_debug_regs_hv(hw, offset,
- data, true);
+ data, true);
goto out;
}
@@ -2828,7 +2828,7 @@ static s32 __e1000_read_phy_reg_hv(struct e1000_hw *hw, u32 offset, u16 *data,
}
ret_val = e1000e_read_phy_reg_mdic(hw, MAX_PHY_REG_ADDRESS & reg,
- data);
+ data);
out:
if (!locked)
hw->phy.ops.release(hw);
@@ -2876,7 +2876,7 @@ s32 e1000_read_phy_reg_hv_locked(struct e1000_hw *hw, u32 offset, u16 *data)
* at the offset. Release any acquired semaphores before exiting.
**/
static s32 __e1000_write_phy_reg_hv(struct e1000_hw *hw, u32 offset, u16 data,
- bool locked)
+ bool locked)
{
s32 ret_val;
u16 page = BM_PHY_REG_PAGE(offset);
@@ -2891,13 +2891,13 @@ static s32 __e1000_write_phy_reg_hv(struct e1000_hw *hw, u32 offset, u16 data,
/* Page 800 works differently than the rest so it has its own func */
if (page == BM_WUC_PAGE) {
ret_val = e1000_access_phy_wakeup_reg_bm(hw, offset,
- &data, false);
+ &data, false);
goto out;
}
if (page > 0 && page < HV_INTC_FC_PAGE_START) {
ret_val = e1000_access_phy_debug_regs_hv(hw, offset,
- &data, false);
+ &data, false);
goto out;
}
@@ -2917,7 +2917,7 @@ static s32 __e1000_write_phy_reg_hv(struct e1000_hw *hw, u32 offset, u16 data,
(data & (1 << 11))) {
u16 data2 = 0x7EFF;
ret_val = e1000_access_phy_debug_regs_hv(hw, (1 << 6) | 0x3,
- &data2, false);
+ &data2, false);
if (ret_val)
goto out;
}
@@ -2938,7 +2938,7 @@ static s32 __e1000_write_phy_reg_hv(struct e1000_hw *hw, u32 offset, u16 data,
}
ret_val = e1000e_write_phy_reg_mdic(hw, MAX_PHY_REG_ADDRESS & reg,
- data);
+ data);
out:
if (!locked)
@@ -3001,7 +3001,7 @@ static u32 e1000_get_phy_addr_for_hv_page(u32 page)
* to read these regs uses the address port and data port to read/write.
**/
static s32 e1000_access_phy_debug_regs_hv(struct e1000_hw *hw, u32 offset,
- u16 *data, bool read)
+ u16 *data, bool read)
{
s32 ret_val;
u32 addr_reg = 0;
@@ -3009,7 +3009,7 @@ static s32 e1000_access_phy_debug_regs_hv(struct e1000_hw *hw, u32 offset,
/* This takes care of the difference with desktop vs mobile phy */
addr_reg = (hw->phy.type == e1000_phy_82578) ?
- I82578_ADDR_REG : I82577_ADDR_REG;
+ I82578_ADDR_REG : I82577_ADDR_REG;
data_reg = addr_reg + 1;
/* All operations in this function are phy address 2 */
@@ -3067,25 +3067,25 @@ s32 e1000_link_stall_workaround_hv(struct e1000_hw *hw)
goto out;
data &= BM_CS_STATUS_LINK_UP |
- BM_CS_STATUS_RESOLVED |
- BM_CS_STATUS_SPEED_MASK;
+ BM_CS_STATUS_RESOLVED |
+ BM_CS_STATUS_SPEED_MASK;
if (data != (BM_CS_STATUS_LINK_UP |
- BM_CS_STATUS_RESOLVED |
- BM_CS_STATUS_SPEED_1000))
+ BM_CS_STATUS_RESOLVED |
+ BM_CS_STATUS_SPEED_1000))
goto out;
mdelay(200);
/* flush the packets in the fifo buffer */
ret_val = hw->phy.ops.write_reg(hw, HV_MUX_DATA_CTRL,
- HV_MUX_DATA_CTRL_GEN_TO_MAC |
- HV_MUX_DATA_CTRL_FORCE_SPEED);
+ HV_MUX_DATA_CTRL_GEN_TO_MAC |
+ HV_MUX_DATA_CTRL_FORCE_SPEED);
if (ret_val)
goto out;
ret_val = hw->phy.ops.write_reg(hw, HV_MUX_DATA_CTRL,
- HV_MUX_DATA_CTRL_GEN_TO_MAC);
+ HV_MUX_DATA_CTRL_GEN_TO_MAC);
out:
return ret_val;
@@ -3109,8 +3109,8 @@ s32 e1000_check_polarity_82577(struct e1000_hw *hw)
if (!ret_val)
phy->cable_polarity = (data & I82577_PHY_STATUS2_REV_POLARITY)
- ? e1000_rev_polarity_reversed
- : e1000_rev_polarity_normal;
+ ? e1000_rev_polarity_reversed
+ : e1000_rev_polarity_normal;
return ret_val;
}
@@ -3144,9 +3144,9 @@ s32 e1000_phy_force_speed_duplex_82577(struct e1000_hw *hw)
e_dbg("Waiting for forced speed/duplex link on 82577 phy\n");
ret_val = e1000e_phy_has_link_generic(hw,
- PHY_FORCE_LIMIT,
- 100000,
- &link);
+ PHY_FORCE_LIMIT,
+ 100000,
+ &link);
if (ret_val)
goto out;
@@ -3155,9 +3155,9 @@ s32 e1000_phy_force_speed_duplex_82577(struct e1000_hw *hw)
/* Try once more */
ret_val = e1000e_phy_has_link_generic(hw,
- PHY_FORCE_LIMIT,
- 100000,
- &link);
+ PHY_FORCE_LIMIT,
+ 100000,
+ &link);
if (ret_val)
goto out;
}
@@ -3215,12 +3215,12 @@ s32 e1000_get_phy_info_82577(struct e1000_hw *hw)
goto out;
phy->local_rx = (data & SR_1000T_LOCAL_RX_STATUS)
- ? e1000_1000t_rx_status_ok
- : e1000_1000t_rx_status_not_ok;
+ ? e1000_1000t_rx_status_ok
+ : e1000_1000t_rx_status_not_ok;
phy->remote_rx = (data & SR_1000T_REMOTE_RX_STATUS)
- ? e1000_1000t_rx_status_ok
- : e1000_1000t_rx_status_not_ok;
+ ? e1000_1000t_rx_status_ok
+ : e1000_1000t_rx_status_not_ok;
} else {
phy->cable_length = E1000_CABLE_LENGTH_UNDEFINED;
phy->local_rx = e1000_1000t_rx_status_undefined;
@@ -3249,7 +3249,7 @@ s32 e1000_get_cable_length_82577(struct e1000_hw *hw)
goto out;
length = (phy_data & I82577_DSTATUS_CABLE_LENGTH) >>
- I82577_DSTATUS_CABLE_LENGTH_SHIFT;
+ I82577_DSTATUS_CABLE_LENGTH_SHIFT;
if (length == E1000_CABLE_LENGTH_UNDEFINED)
ret_val = -E1000_ERR_PHY;
--
1.7.2.3
------------------------------------------------------------------------------
This SF Dev2Dev email is sponsored by:
WikiLeaks The End of the Free Internet
http://p.sf.net/sfu/therealnews-com
_______________________________________________
E1000-devel mailing list
E1000-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/e1000-devel
To learn more about Intel® Ethernet, visit http://communities.intel.com/community/wired
^ permalink raw reply related [flat|nested] 27+ messages in thread* [PATCH 1/7] e1000e: cleanup: fix spacing issues
2010-12-09 2:40 [PATCH 0/7] e1000e: cleanup Asbjoern Sloth Toennesen
2010-12-09 2:40 ` [PATCH 1/7] e1000e: cleanup: fix spacing issues Asbjoern Sloth Toennesen
@ 2010-12-09 2:40 ` Asbjoern Sloth Toennesen
2010-12-09 2:40 ` Asbjoern Sloth Toennesen
` (20 subsequent siblings)
22 siblings, 0 replies; 27+ messages in thread
From: Asbjoern Sloth Toennesen @ 2010-12-09 2:40 UTC (permalink / raw)
To: Jeff Kirsher, Jeff Kirsher; +Cc: e1000-devel, netdev, linux-kernel
This patch fixes trivial spacing issues in e1000e.
Fixes 187 errors and 59 warnings reported by checkpatch.
Signed-off-by: Asbjoern Sloth Toennesen <asbjorn@asbjorn.biz>
---
drivers/net/e1000e/82571.c | 18 +++---
drivers/net/e1000e/defines.h | 32 ++++++------
drivers/net/e1000e/e1000.h | 14 +++---
drivers/net/e1000e/es2lan.c | 72 ++++++++++++------------
drivers/net/e1000e/ethtool.c | 16 +++---
drivers/net/e1000e/hw.h | 2 +-
drivers/net/e1000e/ich8lan.c | 92 ++++++++++++++++----------------
drivers/net/e1000e/lib.c | 8 ++--
drivers/net/e1000e/netdev.c | 74 +++++++++++++-------------
drivers/net/e1000e/param.c | 2 +-
drivers/net/e1000e/phy.c | 124 +++++++++++++++++++++---------------------
11 files changed, 227 insertions(+), 227 deletions(-)
diff --git a/drivers/net/e1000e/82571.c b/drivers/net/e1000e/82571.c
index 9333921..bbc73ce 100644
--- a/drivers/net/e1000e/82571.c
+++ b/drivers/net/e1000e/82571.c
@@ -1225,12 +1225,12 @@ static void e1000_initialize_hw_bits_82571(struct e1000_hw *hw)
* Ensure that DMA Dynamic Clock gating is disabled on 82571 and 82572
*/
- if ((hw->mac.type == e1000_82571) ||
- (hw->mac.type == e1000_82572)) {
- reg = er32(CTRL_EXT);
- reg &= ~E1000_CTRL_EXT_DMA_DYN_CLK_EN;
- ew32(CTRL_EXT, reg);
- }
+ if ((hw->mac.type == e1000_82571) ||
+ (hw->mac.type == e1000_82572)) {
+ reg = er32(CTRL_EXT);
+ reg &= ~E1000_CTRL_EXT_DMA_DYN_CLK_EN;
+ ew32(CTRL_EXT, reg);
+ }
/* PCI-Ex Control Registers */
@@ -1880,7 +1880,7 @@ static struct e1000_phy_operations e82_phy_ops_igp = {
.set_d0_lplu_state = e1000_set_d0_lplu_state_82571,
.set_d3_lplu_state = e1000e_set_d3_lplu_state,
.write_reg = e1000e_write_phy_reg_igp,
- .cfg_on_link_up = NULL,
+ .cfg_on_link_up = NULL,
};
static struct e1000_phy_operations e82_phy_ops_m88 = {
@@ -1898,7 +1898,7 @@ static struct e1000_phy_operations e82_phy_ops_m88 = {
.set_d0_lplu_state = e1000_set_d0_lplu_state_82571,
.set_d3_lplu_state = e1000e_set_d3_lplu_state,
.write_reg = e1000e_write_phy_reg_m88,
- .cfg_on_link_up = NULL,
+ .cfg_on_link_up = NULL,
};
static struct e1000_phy_operations e82_phy_ops_bm = {
@@ -1916,7 +1916,7 @@ static struct e1000_phy_operations e82_phy_ops_bm = {
.set_d0_lplu_state = e1000_set_d0_lplu_state_82571,
.set_d3_lplu_state = e1000e_set_d3_lplu_state,
.write_reg = e1000e_write_phy_reg_bm2,
- .cfg_on_link_up = NULL,
+ .cfg_on_link_up = NULL,
};
static struct e1000_nvm_operations e82571_nvm_ops = {
diff --git a/drivers/net/e1000e/defines.h b/drivers/net/e1000e/defines.h
index 016ea38..2b969c8 100644
--- a/drivers/net/e1000e/defines.h
+++ b/drivers/net/e1000e/defines.h
@@ -111,19 +111,19 @@
/* mask to determine if packets should be dropped due to frame errors */
#define E1000_RXD_ERR_FRAME_ERR_MASK ( \
- E1000_RXD_ERR_CE | \
- E1000_RXD_ERR_SE | \
- E1000_RXD_ERR_SEQ | \
- E1000_RXD_ERR_CXE | \
- E1000_RXD_ERR_RXE)
+ E1000_RXD_ERR_CE | \
+ E1000_RXD_ERR_SE | \
+ E1000_RXD_ERR_SEQ | \
+ E1000_RXD_ERR_CXE | \
+ E1000_RXD_ERR_RXE)
/* Same mask, but for extended and packet split descriptors */
#define E1000_RXDEXT_ERR_FRAME_ERR_MASK ( \
- E1000_RXDEXT_STATERR_CE | \
- E1000_RXDEXT_STATERR_SE | \
- E1000_RXDEXT_STATERR_SEQ | \
- E1000_RXDEXT_STATERR_CXE | \
- E1000_RXDEXT_STATERR_RXE)
+ E1000_RXDEXT_STATERR_CE | \
+ E1000_RXDEXT_STATERR_SE | \
+ E1000_RXDEXT_STATERR_SEQ | \
+ E1000_RXDEXT_STATERR_CXE | \
+ E1000_RXDEXT_STATERR_RXE)
#define E1000_RXDPS_HDRSTAT_HDRSP 0x00008000
@@ -421,11 +421,11 @@
* o LSC = Link Status Change
*/
#define IMS_ENABLE_MASK ( \
- E1000_IMS_RXT0 | \
- E1000_IMS_TXDW | \
- E1000_IMS_RXDMT0 | \
- E1000_IMS_RXSEQ | \
- E1000_IMS_LSC)
+ E1000_IMS_RXT0 | \
+ E1000_IMS_TXDW | \
+ E1000_IMS_RXDMT0 | \
+ E1000_IMS_RXSEQ | \
+ E1000_IMS_LSC)
/* Interrupt Mask Set */
#define E1000_IMS_TXDW E1000_ICR_TXDW /* Transmit desc written back */
@@ -785,7 +785,7 @@
#define PHY_PAGE_SHIFT 5
#define PHY_REG(page, reg) (((page) << PHY_PAGE_SHIFT) | \
- ((reg) & MAX_PHY_REG_ADDRESS))
+ ((reg) & MAX_PHY_REG_ADDRESS))
/*
* Bits...
diff --git a/drivers/net/e1000e/e1000.h b/drivers/net/e1000e/e1000.h
index fdc67fe..47eb0ba 100644
--- a/drivers/net/e1000e/e1000.h
+++ b/drivers/net/e1000e/e1000.h
@@ -580,12 +580,12 @@ extern s32 e1000e_get_cable_length_igp_2(struct e1000_hw *hw);
extern s32 e1000e_get_phy_info_igp(struct e1000_hw *hw);
extern s32 e1000e_read_phy_reg_igp(struct e1000_hw *hw, u32 offset, u16 *data);
extern s32 e1000e_read_phy_reg_igp_locked(struct e1000_hw *hw, u32 offset,
- u16 *data);
+ u16 *data);
extern s32 e1000e_phy_hw_reset_generic(struct e1000_hw *hw);
extern s32 e1000e_set_d3_lplu_state(struct e1000_hw *hw, bool active);
extern s32 e1000e_write_phy_reg_igp(struct e1000_hw *hw, u32 offset, u16 data);
extern s32 e1000e_write_phy_reg_igp_locked(struct e1000_hw *hw, u32 offset,
- u16 data);
+ u16 data);
extern s32 e1000e_phy_sw_reset(struct e1000_hw *hw);
extern s32 e1000e_phy_force_speed_duplex_m88(struct e1000_hw *hw);
extern s32 e1000e_get_cfg_done(struct e1000_hw *hw);
@@ -603,12 +603,12 @@ extern s32 e1000e_write_phy_reg_bm2(struct e1000_hw *hw, u32 offset, u16 data);
extern void e1000e_phy_force_speed_duplex_setup(struct e1000_hw *hw, u16 *phy_ctrl);
extern s32 e1000e_write_kmrn_reg(struct e1000_hw *hw, u32 offset, u16 data);
extern s32 e1000e_write_kmrn_reg_locked(struct e1000_hw *hw, u32 offset,
- u16 data);
+ u16 data);
extern s32 e1000e_read_kmrn_reg(struct e1000_hw *hw, u32 offset, u16 *data);
extern s32 e1000e_read_kmrn_reg_locked(struct e1000_hw *hw, u32 offset,
- u16 *data);
+ u16 *data);
extern s32 e1000e_phy_has_link_generic(struct e1000_hw *hw, u32 iterations,
- u32 usec_interval, bool *success);
+ u32 usec_interval, bool *success);
extern s32 e1000e_phy_reset_dsp(struct e1000_hw *hw);
extern void e1000_power_up_phy_copper(struct e1000_hw *hw);
extern void e1000_power_down_phy_copper(struct e1000_hw *hw);
@@ -617,10 +617,10 @@ extern s32 e1000e_write_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 data);
extern s32 e1000e_check_downshift(struct e1000_hw *hw);
extern s32 e1000_read_phy_reg_hv(struct e1000_hw *hw, u32 offset, u16 *data);
extern s32 e1000_read_phy_reg_hv_locked(struct e1000_hw *hw, u32 offset,
- u16 *data);
+ u16 *data);
extern s32 e1000_write_phy_reg_hv(struct e1000_hw *hw, u32 offset, u16 data);
extern s32 e1000_write_phy_reg_hv_locked(struct e1000_hw *hw, u32 offset,
- u16 data);
+ u16 data);
extern s32 e1000_link_stall_workaround_hv(struct e1000_hw *hw);
extern s32 e1000_copper_link_setup_82577(struct e1000_hw *hw);
extern s32 e1000_check_polarity_82577(struct e1000_hw *hw);
diff --git a/drivers/net/e1000e/es2lan.c b/drivers/net/e1000e/es2lan.c
index 24f8ac9..afed60f 100644
--- a/drivers/net/e1000e/es2lan.c
+++ b/drivers/net/e1000e/es2lan.c
@@ -114,9 +114,9 @@ static s32 e1000_cfg_kmrn_1000_80003es2lan(struct e1000_hw *hw);
static s32 e1000_cfg_kmrn_10_100_80003es2lan(struct e1000_hw *hw, u16 duplex);
static s32 e1000_cfg_on_link_up_80003es2lan(struct e1000_hw *hw);
static s32 e1000_read_kmrn_reg_80003es2lan(struct e1000_hw *hw, u32 offset,
- u16 *data);
+ u16 *data);
static s32 e1000_write_kmrn_reg_80003es2lan(struct e1000_hw *hw, u32 offset,
- u16 data);
+ u16 data);
static void e1000_power_down_phy_copper_80003es2lan(struct e1000_hw *hw);
/**
@@ -225,8 +225,8 @@ static s32 e1000_init_mac_params_80003es2lan(struct e1000_adapter *adapter)
mac->has_fwsm = true;
/* ARC supported; valid only if manageability features are enabled. */
mac->arc_subsystem_valid =
- (er32(FWSM) & E1000_FWSM_MODE_MASK)
- ? true : false;
+ (er32(FWSM) & E1000_FWSM_MODE_MASK)
+ ? true : false;
/* Adaptive IFS not supported */
mac->adaptive_ifs = false;
@@ -493,14 +493,14 @@ static s32 e1000_read_phy_reg_gg82563_80003es2lan(struct e1000_hw *hw,
udelay(200);
ret_val = e1000e_read_phy_reg_mdic(hw,
- MAX_PHY_REG_ADDRESS & offset,
- data);
+ MAX_PHY_REG_ADDRESS & offset,
+ data);
udelay(200);
} else {
ret_val = e1000e_read_phy_reg_mdic(hw,
- MAX_PHY_REG_ADDRESS & offset,
- data);
+ MAX_PHY_REG_ADDRESS & offset,
+ data);
}
e1000_release_phy_80003es2lan(hw);
@@ -564,14 +564,14 @@ static s32 e1000_write_phy_reg_gg82563_80003es2lan(struct e1000_hw *hw,
udelay(200);
ret_val = e1000e_write_phy_reg_mdic(hw,
- MAX_PHY_REG_ADDRESS & offset,
- data);
+ MAX_PHY_REG_ADDRESS & offset,
+ data);
udelay(200);
} else {
ret_val = e1000e_write_phy_reg_mdic(hw,
- MAX_PHY_REG_ADDRESS & offset,
- data);
+ MAX_PHY_REG_ADDRESS & offset,
+ data);
}
e1000_release_phy_80003es2lan(hw);
@@ -898,9 +898,9 @@ static s32 e1000_init_hw_80003es2lan(struct e1000_hw *hw)
hw->dev_spec.e80003es2lan.mdic_wa_enable = true;
ret_val = e1000_read_kmrn_reg_80003es2lan(hw,
- E1000_KMRNCTRLSTA_OFFSET >>
- E1000_KMRNCTRLSTA_OFFSET_SHIFT,
- &i);
+ E1000_KMRNCTRLSTA_OFFSET >>
+ E1000_KMRNCTRLSTA_OFFSET_SHIFT,
+ &i);
if (!ret_val) {
if ((i & E1000_KMRNCTRLSTA_OPMODE_MASK) ==
E1000_KMRNCTRLSTA_OPMODE_INBAND_MDIO)
@@ -1127,16 +1127,16 @@ static s32 e1000_setup_copper_link_80003es2lan(struct e1000_hw *hw)
* polling the phy; this fixes erroneous timeouts at 10Mbps.
*/
ret_val = e1000_write_kmrn_reg_80003es2lan(hw, GG82563_REG(0x34, 4),
- 0xFFFF);
+ 0xFFFF);
if (ret_val)
return ret_val;
ret_val = e1000_read_kmrn_reg_80003es2lan(hw, GG82563_REG(0x34, 9),
- ®_data);
+ ®_data);
if (ret_val)
return ret_val;
reg_data |= 0x3F;
ret_val = e1000_write_kmrn_reg_80003es2lan(hw, GG82563_REG(0x34, 9),
- reg_data);
+ reg_data);
if (ret_val)
return ret_val;
ret_val = e1000_read_kmrn_reg_80003es2lan(hw,
@@ -1176,7 +1176,7 @@ static s32 e1000_cfg_on_link_up_80003es2lan(struct e1000_hw *hw)
if (hw->phy.media_type == e1000_media_type_copper) {
ret_val = e1000e_get_speed_and_duplex_copper(hw, &speed,
- &duplex);
+ &duplex);
if (ret_val)
return ret_val;
@@ -1206,8 +1206,8 @@ static s32 e1000_cfg_kmrn_10_100_80003es2lan(struct e1000_hw *hw, u16 duplex)
reg_data = E1000_KMRNCTRLSTA_HD_CTRL_10_100_DEFAULT;
ret_val = e1000_write_kmrn_reg_80003es2lan(hw,
- E1000_KMRNCTRLSTA_OFFSET_HD_CTRL,
- reg_data);
+ E1000_KMRNCTRLSTA_OFFSET_HD_CTRL,
+ reg_data);
if (ret_val)
return ret_val;
@@ -1254,8 +1254,8 @@ static s32 e1000_cfg_kmrn_1000_80003es2lan(struct e1000_hw *hw)
reg_data = E1000_KMRNCTRLSTA_HD_CTRL_1000_DEFAULT;
ret_val = e1000_write_kmrn_reg_80003es2lan(hw,
- E1000_KMRNCTRLSTA_OFFSET_HD_CTRL,
- reg_data);
+ E1000_KMRNCTRLSTA_OFFSET_HD_CTRL,
+ reg_data);
if (ret_val)
return ret_val;
@@ -1303,7 +1303,7 @@ static s32 e1000_read_kmrn_reg_80003es2lan(struct e1000_hw *hw, u32 offset,
return ret_val;
kmrnctrlsta = ((offset << E1000_KMRNCTRLSTA_OFFSET_SHIFT) &
- E1000_KMRNCTRLSTA_OFFSET) | E1000_KMRNCTRLSTA_REN;
+ E1000_KMRNCTRLSTA_OFFSET) | E1000_KMRNCTRLSTA_REN;
ew32(KMRNCTRLSTA, kmrnctrlsta);
udelay(2);
@@ -1337,7 +1337,7 @@ static s32 e1000_write_kmrn_reg_80003es2lan(struct e1000_hw *hw, u32 offset,
return ret_val;
kmrnctrlsta = ((offset << E1000_KMRNCTRLSTA_OFFSET_SHIFT) &
- E1000_KMRNCTRLSTA_OFFSET) | data;
+ E1000_KMRNCTRLSTA_OFFSET) | data;
ew32(KMRNCTRLSTA, kmrnctrlsta);
udelay(2);
@@ -1457,18 +1457,18 @@ static struct e1000_phy_operations es2_phy_ops = {
.acquire = e1000_acquire_phy_80003es2lan,
.check_polarity = e1000_check_polarity_m88,
.check_reset_block = e1000e_check_reset_block_generic,
- .commit = e1000e_phy_sw_reset,
- .force_speed_duplex = e1000_phy_force_speed_duplex_80003es2lan,
- .get_cfg_done = e1000_get_cfg_done_80003es2lan,
- .get_cable_length = e1000_get_cable_length_80003es2lan,
- .get_info = e1000e_get_phy_info_m88,
- .read_reg = e1000_read_phy_reg_gg82563_80003es2lan,
+ .commit = e1000e_phy_sw_reset,
+ .force_speed_duplex = e1000_phy_force_speed_duplex_80003es2lan,
+ .get_cfg_done = e1000_get_cfg_done_80003es2lan,
+ .get_cable_length = e1000_get_cable_length_80003es2lan,
+ .get_info = e1000e_get_phy_info_m88,
+ .read_reg = e1000_read_phy_reg_gg82563_80003es2lan,
.release = e1000_release_phy_80003es2lan,
- .reset = e1000e_phy_hw_reset_generic,
- .set_d0_lplu_state = NULL,
- .set_d3_lplu_state = e1000e_set_d3_lplu_state,
- .write_reg = e1000_write_phy_reg_gg82563_80003es2lan,
- .cfg_on_link_up = e1000_cfg_on_link_up_80003es2lan,
+ .reset = e1000e_phy_hw_reset_generic,
+ .set_d0_lplu_state = NULL,
+ .set_d3_lplu_state = e1000e_set_d3_lplu_state,
+ .write_reg = e1000_write_phy_reg_gg82563_80003es2lan,
+ .cfg_on_link_up = e1000_cfg_on_link_up_80003es2lan,
};
static struct e1000_nvm_operations es2_nvm_ops = {
diff --git a/drivers/net/e1000e/ethtool.c b/drivers/net/e1000e/ethtool.c
index 8984d16..8acfbca 100644
--- a/drivers/net/e1000e/ethtool.c
+++ b/drivers/net/e1000e/ethtool.c
@@ -47,7 +47,7 @@ struct e1000_stats {
#define E1000_STAT(m) E1000_STATS, \
sizeof(((struct e1000_adapter *)0)->m), \
- offsetof(struct e1000_adapter, m)
+ offsetof(struct e1000_adapter, m)
#define E1000_NETDEV_STAT(m) NETDEV_STATS, \
sizeof(((struct net_device *)0)->m), \
offsetof(struct net_device, m)
@@ -187,7 +187,7 @@ static int e1000_get_settings(struct net_device *netdev,
if ((hw->phy.media_type == e1000_media_type_copper) &&
netif_carrier_ok(netdev))
ecmd->eth_tp_mdix = hw->phy.is_mdix ? ETH_TP_MDI_X :
- ETH_TP_MDI;
+ ETH_TP_MDI;
else
ecmd->eth_tp_mdix = ETH_TP_MDI_INVALID;
@@ -830,7 +830,7 @@ static int e1000_reg_test(struct e1000_adapter *adapter, u64 *data)
case e1000_80003es2lan:
toggle = 0x7FFFF3FF;
break;
- default:
+ default:
toggle = 0x7FFFF033;
break;
}
@@ -890,7 +890,7 @@ static int e1000_reg_test(struct e1000_adapter *adapter, u64 *data)
}
for (i = 0; i < mac->rar_entry_count; i++)
REG_PATTERN_TEST_ARRAY(E1000_RA, ((i << 1) + 1),
- mask, 0xFFFFFFFF);
+ mask, 0xFFFFFFFF);
for (i = 0; i < mac->mta_reg_count; i++)
REG_PATTERN_TEST_ARRAY(E1000_MTA, i, 0xFFFFFFFF, 0xFFFFFFFF);
@@ -1796,8 +1796,8 @@ static void e1000_get_wol(struct net_device *netdev,
return;
wol->supported = WAKE_UCAST | WAKE_MCAST |
- WAKE_BCAST | WAKE_MAGIC |
- WAKE_PHY | WAKE_ARP;
+ WAKE_BCAST | WAKE_MAGIC |
+ WAKE_PHY | WAKE_ARP;
/* apply any specific unsupported masks here */
if (adapter->flags & FLAG_NO_WAKE_UCAST) {
@@ -1830,7 +1830,7 @@ static int e1000_set_wol(struct net_device *netdev,
if (!(adapter->flags & FLAG_HAS_WOL) ||
!device_can_wakeup(&adapter->pdev->dev) ||
(wol->wolopts & ~(WAKE_UCAST | WAKE_MCAST | WAKE_BCAST |
- WAKE_MAGIC | WAKE_PHY | WAKE_ARP)))
+ WAKE_MAGIC | WAKE_PHY | WAKE_ARP)))
return -EOPNOTSUPP;
/* these settings will always override what we currently have */
@@ -1863,7 +1863,7 @@ static int e1000_set_wol(struct net_device *netdev,
static void e1000e_led_blink_task(struct work_struct *work)
{
struct e1000_adapter *adapter = container_of(work,
- struct e1000_adapter, led_blink_task);
+ struct e1000_adapter, led_blink_task);
if (test_and_change_bit(E1000_LED_ON, &adapter->led_status))
adapter->hw.mac.ops.led_off(&adapter->hw);
diff --git a/drivers/net/e1000e/hw.h b/drivers/net/e1000e/hw.h
index ba302a5..0a319e1 100644
--- a/drivers/net/e1000e/hw.h
+++ b/drivers/net/e1000e/hw.h
@@ -37,7 +37,7 @@ struct e1000_adapter;
#include "defines.h"
#define er32(reg) __er32(hw, E1000_##reg)
-#define ew32(reg,val) __ew32(hw, E1000_##reg, (val))
+#define ew32(reg, val) __ew32(hw, E1000_##reg, (val))
#define e1e_flush() er32(STATUS)
#define E1000_WRITE_REG_ARRAY(a, reg, offset, value) \
diff --git a/drivers/net/e1000e/ich8lan.c b/drivers/net/e1000e/ich8lan.c
index e3374d9..53edfd4 100644
--- a/drivers/net/e1000e/ich8lan.c
+++ b/drivers/net/e1000e/ich8lan.c
@@ -267,8 +267,8 @@ static inline void __ew32flash(struct e1000_hw *hw, unsigned long reg, u32 val)
#define er16flash(reg) __er16flash(hw, (reg))
#define er32flash(reg) __er32flash(hw, (reg))
-#define ew16flash(reg,val) __ew16flash(hw, (reg), (val))
-#define ew32flash(reg,val) __ew32flash(hw, (reg), (val))
+#define ew16flash(reg, val) __ew16flash(hw, (reg), (val))
+#define ew32flash(reg, val) __ew32flash(hw, (reg), (val))
/**
* e1000_init_phy_params_pchlan - Initialize PHY function pointers
@@ -1098,46 +1098,46 @@ static s32 e1000_k1_gig_workaround_hv(struct e1000_hw *hw, bool link)
if (link) {
if (hw->phy.type == e1000_phy_82578) {
ret_val = hw->phy.ops.read_reg_locked(hw, BM_CS_STATUS,
- &status_reg);
+ &status_reg);
if (ret_val)
goto release;
status_reg &= BM_CS_STATUS_LINK_UP |
- BM_CS_STATUS_RESOLVED |
- BM_CS_STATUS_SPEED_MASK;
+ BM_CS_STATUS_RESOLVED |
+ BM_CS_STATUS_SPEED_MASK;
if (status_reg == (BM_CS_STATUS_LINK_UP |
- BM_CS_STATUS_RESOLVED |
- BM_CS_STATUS_SPEED_1000))
+ BM_CS_STATUS_RESOLVED |
+ BM_CS_STATUS_SPEED_1000))
k1_enable = false;
}
if (hw->phy.type == e1000_phy_82577) {
ret_val = hw->phy.ops.read_reg_locked(hw, HV_M_STATUS,
- &status_reg);
+ &status_reg);
if (ret_val)
goto release;
status_reg &= HV_M_STATUS_LINK_UP |
- HV_M_STATUS_AUTONEG_COMPLETE |
- HV_M_STATUS_SPEED_MASK;
+ HV_M_STATUS_AUTONEG_COMPLETE |
+ HV_M_STATUS_SPEED_MASK;
if (status_reg == (HV_M_STATUS_LINK_UP |
- HV_M_STATUS_AUTONEG_COMPLETE |
- HV_M_STATUS_SPEED_1000))
+ HV_M_STATUS_AUTONEG_COMPLETE |
+ HV_M_STATUS_SPEED_1000))
k1_enable = false;
}
/* Link stall fix for link up */
ret_val = hw->phy.ops.write_reg_locked(hw, PHY_REG(770, 19),
- 0x0100);
+ 0x0100);
if (ret_val)
goto release;
} else {
/* Link stall fix for link down */
ret_val = hw->phy.ops.write_reg_locked(hw, PHY_REG(770, 19),
- 0x4100);
+ 0x4100);
if (ret_val)
goto release;
}
@@ -1169,8 +1169,8 @@ s32 e1000_configure_k1_ich8lan(struct e1000_hw *hw, bool k1_enable)
u16 kmrn_reg = 0;
ret_val = e1000e_read_kmrn_reg_locked(hw,
- E1000_KMRNCTRLSTA_K1_CONFIG,
- &kmrn_reg);
+ E1000_KMRNCTRLSTA_K1_CONFIG,
+ &kmrn_reg);
if (ret_val)
goto out;
@@ -1180,8 +1180,8 @@ s32 e1000_configure_k1_ich8lan(struct e1000_hw *hw, bool k1_enable)
kmrn_reg &= ~E1000_KMRNCTRLSTA_K1_ENABLE;
ret_val = e1000e_write_kmrn_reg_locked(hw,
- E1000_KMRNCTRLSTA_K1_CONFIG,
- kmrn_reg);
+ E1000_KMRNCTRLSTA_K1_CONFIG,
+ kmrn_reg);
if (ret_val)
goto out;
@@ -1356,13 +1356,13 @@ static s32 e1000_hv_phy_workarounds_ich8lan(struct e1000_hw *hw)
if (ret_val)
goto out;
ret_val = hw->phy.ops.read_reg_locked(hw,
- PHY_REG(BM_PORT_CTRL_PAGE, 17),
- &phy_data);
+ PHY_REG(BM_PORT_CTRL_PAGE, 17),
+ &phy_data);
if (ret_val)
goto release;
ret_val = hw->phy.ops.write_reg_locked(hw,
- PHY_REG(BM_PORT_CTRL_PAGE, 17),
- phy_data & 0x00FF);
+ PHY_REG(BM_PORT_CTRL_PAGE, 17),
+ phy_data & 0x00FF);
release:
hw->phy.ops.release(hw);
out:
@@ -2015,7 +2015,7 @@ static s32 e1000_valid_nvm_bank_detect_ich8lan(struct e1000_hw *hw, u32 *bank)
/* Check bank 0 */
ret_val = e1000_read_flash_byte_ich8lan(hw, act_offset,
- &sig_byte);
+ &sig_byte);
if (ret_val)
return ret_val;
if ((sig_byte & E1000_ICH_NVM_VALID_SIG_MASK) ==
@@ -2026,8 +2026,8 @@ static s32 e1000_valid_nvm_bank_detect_ich8lan(struct e1000_hw *hw, u32 *bank)
/* Check bank 1 */
ret_val = e1000_read_flash_byte_ich8lan(hw, act_offset +
- bank1_offset,
- &sig_byte);
+ bank1_offset,
+ &sig_byte);
if (ret_val)
return ret_val;
if ((sig_byte & E1000_ICH_NVM_VALID_SIG_MASK) ==
@@ -2428,8 +2428,8 @@ static s32 e1000_update_nvm_checksum_ich8lan(struct e1000_hw *hw)
data = dev_spec->shadow_ram[i].value;
} else {
ret_val = e1000_read_flash_word_ich8lan(hw, i +
- old_bank_offset,
- &data);
+ old_bank_offset,
+ &data);
if (ret_val)
break;
}
@@ -2640,7 +2640,7 @@ static s32 e1000_write_flash_data_ich8lan(struct e1000_hw *hw, u32 offset,
hsflctl.regval = er16flash(ICH_FLASH_HSFCTL);
/* 0b/1b corresponds to 1 or 2 byte size, respectively. */
- hsflctl.hsf_ctrl.fldbcount = size -1;
+ hsflctl.hsf_ctrl.fldbcount = size - 1;
hsflctl.hsf_ctrl.flcycle = ICH_CYCLE_WRITE;
ew16flash(ICH_FLASH_HSFCTL, hsflctl.regval);
@@ -3272,8 +3272,8 @@ static s32 e1000_setup_link_ich8lan(struct e1000_hw *hw)
ew32(FCRTV_PCH, hw->fc.refresh_time);
ret_val = hw->phy.ops.write_reg(hw,
- PHY_REG(BM_PORT_CTRL_PAGE, 27),
- hw->fc.pause_time);
+ PHY_REG(BM_PORT_CTRL_PAGE, 27),
+ hw->fc.pause_time);
if (ret_val)
return ret_val;
}
@@ -3309,12 +3309,12 @@ static s32 e1000_setup_copper_link_ich8lan(struct e1000_hw *hw)
if (ret_val)
return ret_val;
ret_val = e1000e_read_kmrn_reg(hw, E1000_KMRNCTRLSTA_INBAND_PARAM,
- ®_data);
+ ®_data);
if (ret_val)
return ret_val;
reg_data |= 0x3F;
ret_val = e1000e_write_kmrn_reg(hw, E1000_KMRNCTRLSTA_INBAND_PARAM,
- reg_data);
+ reg_data);
if (ret_val)
return ret_val;
@@ -3338,7 +3338,7 @@ static s32 e1000_setup_copper_link_ich8lan(struct e1000_hw *hw)
break;
case e1000_phy_ife:
ret_val = hw->phy.ops.read_reg(hw, IFE_PHY_MDIX_CONTROL,
- ®_data);
+ ®_data);
if (ret_val)
return ret_val;
@@ -3357,7 +3357,7 @@ static s32 e1000_setup_copper_link_ich8lan(struct e1000_hw *hw)
break;
}
ret_val = hw->phy.ops.write_reg(hw, IFE_PHY_MDIX_CONTROL,
- reg_data);
+ reg_data);
if (ret_val)
return ret_val;
break;
@@ -3857,21 +3857,21 @@ static void e1000_clear_hw_cntrs_ich8lan(struct e1000_hw *hw)
}
static struct e1000_mac_operations ich8_mac_ops = {
- .id_led_init = e1000e_id_led_init,
+ .id_led_init = e1000e_id_led_init,
/* check_mng_mode dependent on mac type */
- .check_for_link = e1000_check_for_copper_link_ich8lan,
+ .check_for_link = e1000_check_for_copper_link_ich8lan,
/* cleanup_led dependent on mac type */
- .clear_hw_cntrs = e1000_clear_hw_cntrs_ich8lan,
- .get_bus_info = e1000_get_bus_info_ich8lan,
- .set_lan_id = e1000_set_lan_id_single_port,
- .get_link_up_info = e1000_get_link_up_info_ich8lan,
+ .clear_hw_cntrs = e1000_clear_hw_cntrs_ich8lan,
+ .get_bus_info = e1000_get_bus_info_ich8lan,
+ .set_lan_id = e1000_set_lan_id_single_port,
+ .get_link_up_info = e1000_get_link_up_info_ich8lan,
/* led_on dependent on mac type */
/* led_off dependent on mac type */
- .update_mc_addr_list = e1000e_update_mc_addr_list_generic,
- .reset_hw = e1000_reset_hw_ich8lan,
- .init_hw = e1000_init_hw_ich8lan,
- .setup_link = e1000_setup_link_ich8lan,
- .setup_physical_interface= e1000_setup_copper_link_ich8lan,
+ .update_mc_addr_list = e1000e_update_mc_addr_list_generic,
+ .reset_hw = e1000_reset_hw_ich8lan,
+ .init_hw = e1000_init_hw_ich8lan,
+ .setup_link = e1000_setup_link_ich8lan,
+ .setup_physical_interface = e1000_setup_copper_link_ich8lan,
/* id_led_init dependent on mac type */
};
@@ -3891,7 +3891,7 @@ static struct e1000_phy_operations ich8_phy_ops = {
static struct e1000_nvm_operations ich8_nvm_ops = {
.acquire = e1000_acquire_nvm_ich8lan,
- .read = e1000_read_nvm_ich8lan,
+ .read = e1000_read_nvm_ich8lan,
.release = e1000_release_nvm_ich8lan,
.update = e1000_update_nvm_checksum_ich8lan,
.valid_led_default = e1000_valid_led_default_ich8lan,
diff --git a/drivers/net/e1000e/lib.c b/drivers/net/e1000e/lib.c
index 0fd4eb5..20870b2 100644
--- a/drivers/net/e1000e/lib.c
+++ b/drivers/net/e1000e/lib.c
@@ -194,7 +194,7 @@ s32 e1000_check_alt_mac_addr_generic(struct e1000_hw *hw)
goto out;
ret_val = e1000_read_nvm(hw, NVM_ALT_MAC_ADDR_PTR, 1,
- &nvm_alt_mac_addr_offset);
+ &nvm_alt_mac_addr_offset);
if (ret_val) {
e_dbg("NVM Read Error\n");
goto out;
@@ -1505,10 +1505,10 @@ s32 e1000e_setup_led_generic(struct e1000_hw *hw)
hw->mac.ledctl_default = ledctl;
/* Turn off LED0 */
ledctl &= ~(E1000_LEDCTL_LED0_IVRT |
- E1000_LEDCTL_LED0_BLINK |
- E1000_LEDCTL_LED0_MODE_MASK);
+ E1000_LEDCTL_LED0_BLINK |
+ E1000_LEDCTL_LED0_MODE_MASK);
ledctl |= (E1000_LEDCTL_MODE_LED_OFF <<
- E1000_LEDCTL_LED0_MODE_SHIFT);
+ E1000_LEDCTL_LED0_MODE_SHIFT);
ew32(LEDCTL, ledctl);
} else if (hw->phy.media_type == e1000_media_type_copper) {
ew32(LEDCTL, hw->mac.ledctl_mode1);
diff --git a/drivers/net/e1000e/netdev.c b/drivers/net/e1000e/netdev.c
index 0adcb79..820ea48 100644
--- a/drivers/net/e1000e/netdev.c
+++ b/drivers/net/e1000e/netdev.c
@@ -682,7 +682,7 @@ no_buffers:
**/
static void e1000_alloc_jumbo_rx_buffers(struct e1000_adapter *adapter,
- int cleaned_count)
+ int cleaned_count)
{
struct net_device *netdev = adapter->netdev;
struct pci_dev *pdev = adapter->pdev;
@@ -723,8 +723,8 @@ check_page:
if (!buffer_info->dma)
buffer_info->dma = dma_map_page(&pdev->dev,
- buffer_info->page, 0,
- PAGE_SIZE,
+ buffer_info->page, 0,
+ PAGE_SIZE,
DMA_FROM_DEVICE);
rx_desc = E1000_RX_DESC(*rx_ring, i);
@@ -921,8 +921,8 @@ static void e1000_put_txbuf(struct e1000_adapter *adapter,
static void e1000_print_hw_hang(struct work_struct *work)
{
struct e1000_adapter *adapter = container_of(work,
- struct e1000_adapter,
- print_hang_task);
+ struct e1000_adapter,
+ print_hang_task);
struct e1000_ring *tx_ring = adapter->tx_ring;
unsigned int i = tx_ring->next_to_clean;
unsigned int eop = tx_ring->buffer_info[i].next_to_watch;
@@ -1249,7 +1249,7 @@ next_desc:
* e1000_consume_page - helper function
**/
static void e1000_consume_page(struct e1000_buffer *bi, struct sk_buff *skb,
- u16 length)
+ u16 length)
{
bi->page = NULL;
skb->len += length;
@@ -1266,7 +1266,7 @@ static void e1000_consume_page(struct e1000_buffer *bi, struct sk_buff *skb,
**/
static bool e1000_clean_jumbo_rx_irq(struct e1000_adapter *adapter,
- int *work_done, int work_to_do)
+ int *work_done, int work_to_do)
{
struct net_device *netdev = adapter->netdev;
struct pci_dev *pdev = adapter->pdev;
@@ -1277,7 +1277,7 @@ static bool e1000_clean_jumbo_rx_irq(struct e1000_adapter *adapter,
unsigned int i;
int cleaned_count = 0;
bool cleaned = false;
- unsigned int total_rx_bytes=0, total_rx_packets=0;
+ unsigned int total_rx_bytes = 0, total_rx_packets = 0;
i = rx_ring->next_to_clean;
rx_desc = E1000_RX_DESC(*rx_ring, i);
@@ -1332,7 +1332,7 @@ static bool e1000_clean_jumbo_rx_irq(struct e1000_adapter *adapter,
/* this is the beginning of a chain */
rxtop = skb;
skb_fill_page_desc(rxtop, 0, buffer_info->page,
- 0, length);
+ 0, length);
} else {
/* this is the middle of a chain */
skb_fill_page_desc(rxtop,
@@ -1362,29 +1362,29 @@ static bool e1000_clean_jumbo_rx_irq(struct e1000_adapter *adapter,
skb_tailroom(skb) >= length) {
u8 *vaddr;
vaddr = kmap_atomic(buffer_info->page,
- KM_SKB_DATA_SOFTIRQ);
+ KM_SKB_DATA_SOFTIRQ);
memcpy(skb_tail_pointer(skb), vaddr,
length);
kunmap_atomic(vaddr,
- KM_SKB_DATA_SOFTIRQ);
+ KM_SKB_DATA_SOFTIRQ);
/* re-use the page, so don't erase
* buffer_info->page */
skb_put(skb, length);
} else {
skb_fill_page_desc(skb, 0,
- buffer_info->page, 0,
- length);
+ buffer_info->page, 0,
+ length);
e1000_consume_page(buffer_info, skb,
- length);
+ length);
}
}
}
/* Receive Checksum Offload XXX recompute due to CRC strip? */
e1000_rx_checksum(adapter,
- (u32)(status) |
- ((u32)(rx_desc->errors) << 24),
- le16_to_cpu(rx_desc->csum), skb);
+ (u32)(status) |
+ ((u32)(rx_desc->errors) << 24),
+ le16_to_cpu(rx_desc->csum), skb);
/* probably a little skewed due to removing CRC */
total_rx_bytes += skb->len;
@@ -1398,7 +1398,7 @@ static bool e1000_clean_jumbo_rx_irq(struct e1000_adapter *adapter,
}
e1000_receive_skb(adapter, netdev, skb, status,
- rx_desc->special);
+ rx_desc->special);
next_desc:
rx_desc->status = 0;
@@ -1448,7 +1448,7 @@ static void e1000_clean_rx_ring(struct e1000_adapter *adapter)
DMA_FROM_DEVICE);
else if (adapter->clean_rx == e1000_clean_jumbo_rx_irq)
dma_unmap_page(&pdev->dev, buffer_info->dma,
- PAGE_SIZE,
+ PAGE_SIZE,
DMA_FROM_DEVICE);
else if (adapter->clean_rx == e1000_clean_rx_irq_ps)
dma_unmap_single(&pdev->dev, buffer_info->dma,
@@ -4034,11 +4034,11 @@ static void e1000_print_link_info(struct e1000_adapter *adapter)
adapter->netdev->name,
adapter->link_speed,
(adapter->link_duplex == FULL_DUPLEX) ?
- "Full Duplex" : "Half Duplex",
+ "Full Duplex" : "Half Duplex",
((ctrl & E1000_CTRL_TFCE) && (ctrl & E1000_CTRL_RFCE)) ?
- "RX/TX" :
+ "RX/TX" :
((ctrl & E1000_CTRL_RFCE) ? "RX" :
- ((ctrl & E1000_CTRL_TFCE) ? "TX" : "None" )));
+ ((ctrl & E1000_CTRL_TFCE) ? "TX" : "None")));
}
static bool e1000e_has_link(struct e1000_adapter *adapter)
@@ -4243,7 +4243,7 @@ static void e1000_watchdog_task(struct work_struct *work)
tctl |= E1000_TCTL_EN;
ew32(TCTL, tctl);
- /*
+ /*
* Perform any post-link-up configuration before
* reporting link up.
*/
@@ -4394,14 +4394,14 @@ static int e1000_tso(struct e1000_adapter *adapter,
iph->tot_len = 0;
iph->check = 0;
tcp_hdr(skb)->check = ~csum_tcpudp_magic(iph->saddr, iph->daddr,
- 0, IPPROTO_TCP, 0);
+ 0, IPPROTO_TCP, 0);
cmd_length = E1000_TXD_CMD_IP;
ipcse = skb_transport_offset(skb) - 1;
} else if (skb_is_gso_v6(skb)) {
ipv6_hdr(skb)->payload_len = 0;
tcp_hdr(skb)->check = ~csum_ipv6_magic(&ipv6_hdr(skb)->saddr,
- &ipv6_hdr(skb)->daddr,
- 0, IPPROTO_TCP, 0);
+ &ipv6_hdr(skb)->daddr,
+ 0, IPPROTO_TCP, 0);
ipcse = 0;
}
ipcss = skb_network_offset(skb);
@@ -4411,7 +4411,7 @@ static int e1000_tso(struct e1000_adapter *adapter,
tucse = 0;
cmd_length |= (E1000_TXD_CMD_DEXT | E1000_TXD_CMD_TSE |
- E1000_TXD_CMD_TCP | (skb->len - (hdr_len)));
+ E1000_TXD_CMD_TCP | (skb->len - (hdr_len)));
i = tx_ring->next_to_use;
context_desc = E1000_CONTEXT_DESC(*tx_ring, i);
@@ -4589,7 +4589,7 @@ dma_error:
count--;
while (count--) {
- if (i==0)
+ if (i == 0)
i += tx_ring->count;
i--;
buffer_info = &tx_ring->buffer_info[i];
@@ -4734,7 +4734,7 @@ static int e1000_maybe_stop_tx(struct net_device *netdev, int size)
return __e1000_maybe_stop_tx(netdev, size);
}
-#define TXD_USE_COUNT(S, X) (((S) >> (X)) + 1 )
+#define TXD_USE_COUNT(S, X) (((S) >> (X)) + 1)
static netdev_tx_t e1000_xmit_frame(struct sk_buff *skb,
struct net_device *netdev)
{
@@ -5105,7 +5105,7 @@ static int e1000_init_phy_wakeup(struct e1000_adapter *adapter, u32 wufc)
return retval;
}
e1000e_write_phy_reg_mdic(hw, IGP01E1000_PHY_PAGE_SELECT,
- (BM_WUC_ENABLE_PAGE << IGP_PAGE_SHIFT));
+ (BM_WUC_ENABLE_PAGE << IGP_PAGE_SHIFT));
retval = e1000e_read_phy_reg_mdic(hw, BM_WUC_ENABLE_REG, &phy_reg);
if (retval) {
e_err("Could not read PHY page 769\n");
@@ -5233,7 +5233,7 @@ static void e1000_power_off(struct pci_dev *pdev, bool sleep, bool wake)
}
static void e1000_complete_shutdown(struct pci_dev *pdev, bool sleep,
- bool wake)
+ bool wake)
{
struct net_device *netdev = pci_get_drvdata(pdev);
struct e1000_adapter *adapter = netdev_priv(netdev);
@@ -5251,7 +5251,7 @@ static void e1000_complete_shutdown(struct pci_dev *pdev, bool sleep,
pci_read_config_word(us_dev, pos + PCI_EXP_DEVCTL, &devctl);
pci_write_config_word(us_dev, pos + PCI_EXP_DEVCTL,
- (devctl & ~PCI_EXP_DEVCTL_CERE));
+ (devctl & ~PCI_EXP_DEVCTL_CERE));
e1000_power_off(pdev, sleep, wake);
@@ -5632,7 +5632,7 @@ static void e1000_print_device_info(struct e1000_adapter *adapter)
e_info("(PCI Express:2.5GB/s:%s) %pM\n",
/* bus width */
((hw->bus.width == e1000_bus_width_pcie_x4) ? "Width x4" :
- "Width x1"),
+ "Width x1"),
/* MAC address */
netdev->dev_addr);
e_info("Intel(R) PRO/%s Network Connection\n",
@@ -5732,8 +5732,8 @@ static int __devinit e1000_probe(struct pci_dev *pdev,
}
err = pci_request_selected_regions_exclusive(pdev,
- pci_select_bars(pdev, IORESOURCE_MEM),
- e1000e_driver_name);
+ pci_select_bars(pdev, IORESOURCE_MEM),
+ e1000e_driver_name);
if (err)
goto err_pci_reg;
@@ -6000,7 +6000,7 @@ err_ioremap:
free_netdev(netdev);
err_alloc_etherdev:
pci_release_selected_regions(pdev,
- pci_select_bars(pdev, IORESOURCE_MEM));
+ pci_select_bars(pdev, IORESOURCE_MEM));
err_pci_reg:
err_dma:
pci_disable_device(pdev);
@@ -6063,7 +6063,7 @@ static void __devexit e1000_remove(struct pci_dev *pdev)
if (adapter->hw.flash_address)
iounmap(adapter->hw.flash_address);
pci_release_selected_regions(pdev,
- pci_select_bars(pdev, IORESOURCE_MEM));
+ pci_select_bars(pdev, IORESOURCE_MEM));
free_netdev(netdev);
diff --git a/drivers/net/e1000e/param.c b/drivers/net/e1000e/param.c
index 3d36911..2687295 100644
--- a/drivers/net/e1000e/param.c
+++ b/drivers/net/e1000e/param.c
@@ -157,7 +157,7 @@ E1000_PARAM(WriteProtectNVM, "Write-protect NVM [WARNING: disabling this can lea
* Default Value: 1 (enabled)
*/
E1000_PARAM(CrcStripping, "Enable CRC Stripping, disable if your BMC needs " \
- "the CRC");
+ "the CRC");
struct e1000_option {
enum { enable_option, range_option, list_option } type;
diff --git a/drivers/net/e1000e/phy.c b/drivers/net/e1000e/phy.c
index 3d3dc0c..a26c296 100644
--- a/drivers/net/e1000e/phy.c
+++ b/drivers/net/e1000e/phy.c
@@ -39,7 +39,7 @@ static s32 e1000_access_phy_wakeup_reg_bm(struct e1000_hw *hw, u32 offset,
u16 *data, bool read);
static u32 e1000_get_phy_addr_for_hv_page(u32 page);
static s32 e1000_access_phy_debug_regs_hv(struct e1000_hw *hw, u32 offset,
- u16 *data, bool read);
+ u16 *data, bool read);
/* Cable length tables */
static const u16 e1000_m88_cable_length_table[] =
@@ -345,7 +345,7 @@ s32 e1000e_write_phy_reg_m88(struct e1000_hw *hw, u32 offset, u16 data)
* semaphores before exiting.
**/
static s32 __e1000e_read_phy_reg_igp(struct e1000_hw *hw, u32 offset, u16 *data,
- bool locked)
+ bool locked)
{
s32 ret_val = 0;
@@ -367,7 +367,7 @@ static s32 __e1000e_read_phy_reg_igp(struct e1000_hw *hw, u32 offset, u16 *data,
}
ret_val = e1000e_read_phy_reg_mdic(hw, MAX_PHY_REG_ADDRESS & offset,
- data);
+ data);
release:
if (!locked)
@@ -416,7 +416,7 @@ s32 e1000e_read_phy_reg_igp_locked(struct e1000_hw *hw, u32 offset, u16 *data)
* at the offset. Release any acquired semaphores before exiting.
**/
static s32 __e1000e_write_phy_reg_igp(struct e1000_hw *hw, u32 offset, u16 data,
- bool locked)
+ bool locked)
{
s32 ret_val = 0;
@@ -488,7 +488,7 @@ s32 e1000e_write_phy_reg_igp_locked(struct e1000_hw *hw, u32 offset, u16 data)
* Release any acquired semaphores before exiting.
**/
static s32 __e1000_read_kmrn_reg(struct e1000_hw *hw, u32 offset, u16 *data,
- bool locked)
+ bool locked)
{
u32 kmrnctrlsta;
s32 ret_val = 0;
@@ -560,7 +560,7 @@ s32 e1000e_read_kmrn_reg_locked(struct e1000_hw *hw, u32 offset, u16 *data)
* before exiting.
**/
static s32 __e1000_write_kmrn_reg(struct e1000_hw *hw, u32 offset, u16 data,
- bool locked)
+ bool locked)
{
u32 kmrnctrlsta;
s32 ret_val = 0;
@@ -761,7 +761,7 @@ s32 e1000e_copper_link_setup_m88(struct e1000_hw *hw)
if (phy->type == e1000_phy_82578) {
ret_val = phy->ops.read_reg(hw, M88E1000_EXT_PHY_SPEC_CTRL,
- &phy_data);
+ &phy_data);
if (ret_val)
return ret_val;
@@ -769,7 +769,7 @@ s32 e1000e_copper_link_setup_m88(struct e1000_hw *hw)
phy_data |= I82578_EPSCR_DOWNSHIFT_ENABLE;
phy_data &= ~I82578_EPSCR_DOWNSHIFT_COUNTER_MASK;
ret_val = phy->ops.write_reg(hw, M88E1000_EXT_PHY_SPEC_CTRL,
- phy_data);
+ phy_data);
if (ret_val)
return ret_val;
}
@@ -1400,9 +1400,9 @@ s32 e1000_phy_force_speed_duplex_ife(struct e1000_hw *hw)
e_dbg("Waiting for forced speed/duplex link on IFE phy.\n");
ret_val = e1000e_phy_has_link_generic(hw,
- PHY_FORCE_LIMIT,
- 100000,
- &link);
+ PHY_FORCE_LIMIT,
+ 100000,
+ &link);
if (ret_val)
goto out;
@@ -1411,9 +1411,9 @@ s32 e1000_phy_force_speed_duplex_ife(struct e1000_hw *hw)
/* Try once more */
ret_val = e1000e_phy_has_link_generic(hw,
- PHY_FORCE_LIMIT,
- 100000,
- &link);
+ PHY_FORCE_LIMIT,
+ 100000,
+ &link);
if (ret_val)
goto out;
}
@@ -1698,8 +1698,8 @@ s32 e1000_check_polarity_ife(struct e1000_hw *hw)
if (!ret_val)
phy->cable_polarity = (phy_data & mask)
- ? e1000_rev_polarity_reversed
- : e1000_rev_polarity_normal;
+ ? e1000_rev_polarity_reversed
+ : e1000_rev_polarity_normal;
return ret_val;
}
@@ -1807,7 +1807,7 @@ s32 e1000e_get_cable_length_m88(struct e1000_hw *hw)
goto out;
index = (phy_data & M88E1000_PSSR_CABLE_LENGTH) >>
- M88E1000_PSSR_CABLE_LENGTH_SHIFT;
+ M88E1000_PSSR_CABLE_LENGTH_SHIFT;
if (index >= M88E1000_CABLE_LENGTH_TABLE_SIZE - 1) {
ret_val = -E1000_ERR_PHY;
goto out;
@@ -2055,7 +2055,7 @@ s32 e1000_get_phy_info_ife(struct e1000_hw *hw)
if (ret_val)
goto out;
phy->polarity_correction = (data & IFE_PSC_AUTO_POLARITY_DISABLE)
- ? false : true;
+ ? false : true;
if (phy->polarity_correction) {
ret_val = e1000_check_polarity_ife(hw);
@@ -2064,8 +2064,8 @@ s32 e1000_get_phy_info_ife(struct e1000_hw *hw)
} else {
/* Polarity is forced */
phy->cable_polarity = (data & IFE_PSC_FORCE_POLARITY)
- ? e1000_rev_polarity_reversed
- : e1000_rev_polarity_normal;
+ ? e1000_rev_polarity_reversed
+ : e1000_rev_polarity_normal;
}
ret_val = e1e_rphy(hw, IFE_PHY_MDIX_CONTROL, &data);
@@ -2432,13 +2432,13 @@ s32 e1000e_write_phy_reg_bm(struct e1000_hw *hw, u32 offset, u16 data)
/* Page is shifted left, PHY expects (page x 32) */
ret_val = e1000e_write_phy_reg_mdic(hw, page_select,
- (page << page_shift));
+ (page << page_shift));
if (ret_val)
goto out;
}
ret_val = e1000e_write_phy_reg_mdic(hw, MAX_PHY_REG_ADDRESS & offset,
- data);
+ data);
out:
hw->phy.ops.release(hw);
@@ -2491,13 +2491,13 @@ s32 e1000e_read_phy_reg_bm(struct e1000_hw *hw, u32 offset, u16 *data)
/* Page is shifted left, PHY expects (page x 32) */
ret_val = e1000e_write_phy_reg_mdic(hw, page_select,
- (page << page_shift));
+ (page << page_shift));
if (ret_val)
goto out;
}
ret_val = e1000e_read_phy_reg_mdic(hw, MAX_PHY_REG_ADDRESS & offset,
- data);
+ data);
out:
hw->phy.ops.release(hw);
return ret_val;
@@ -2628,7 +2628,7 @@ static s32 e1000_access_phy_wakeup_reg_bm(struct e1000_hw *hw, u32 offset,
/* Set page 769 */
e1000e_write_phy_reg_mdic(hw, IGP01E1000_PHY_PAGE_SELECT,
- (BM_WUC_ENABLE_PAGE << IGP_PAGE_SHIFT));
+ (BM_WUC_ENABLE_PAGE << IGP_PAGE_SHIFT));
ret_val = e1000e_read_phy_reg_mdic(hw, BM_WUC_ENABLE_REG, &phy_reg);
if (ret_val) {
@@ -2646,7 +2646,7 @@ static s32 e1000_access_phy_wakeup_reg_bm(struct e1000_hw *hw, u32 offset,
/* Write bit 2 = 1, and clear bit 4 to 769_17 */
ret_val = e1000e_write_phy_reg_mdic(hw, BM_WUC_ENABLE_REG,
- phy_reg | BM_WUC_ENABLE_BIT);
+ phy_reg | BM_WUC_ENABLE_BIT);
if (ret_val) {
e_dbg("Could not write PHY page 769 bit 2\n");
goto out;
@@ -2654,7 +2654,7 @@ static s32 e1000_access_phy_wakeup_reg_bm(struct e1000_hw *hw, u32 offset,
/* Select page 800 */
ret_val = e1000e_write_phy_reg_mdic(hw, IGP01E1000_PHY_PAGE_SELECT,
- (BM_WUC_PAGE << IGP_PAGE_SHIFT));
+ (BM_WUC_PAGE << IGP_PAGE_SHIFT));
/* Write the page 800 offset value using opcode 0x11 */
ret_val = e1000e_write_phy_reg_mdic(hw, BM_WUC_ADDRESS_OPCODE, reg);
@@ -2664,11 +2664,11 @@ static s32 e1000_access_phy_wakeup_reg_bm(struct e1000_hw *hw, u32 offset,
}
if (read) {
- /* Read the page 800 value using opcode 0x12 */
+ /* Read the page 800 value using opcode 0x12 */
ret_val = e1000e_read_phy_reg_mdic(hw, BM_WUC_DATA_OPCODE,
- data);
+ data);
} else {
- /* Write the page 800 value using opcode 0x12 */
+ /* Write the page 800 value using opcode 0x12 */
ret_val = e1000e_write_phy_reg_mdic(hw, BM_WUC_DATA_OPCODE,
*data);
}
@@ -2683,7 +2683,7 @@ static s32 e1000_access_phy_wakeup_reg_bm(struct e1000_hw *hw, u32 offset,
* Set page 769
*/
e1000e_write_phy_reg_mdic(hw, IGP01E1000_PHY_PAGE_SELECT,
- (BM_WUC_ENABLE_PAGE << IGP_PAGE_SHIFT));
+ (BM_WUC_ENABLE_PAGE << IGP_PAGE_SHIFT));
/* Clear 769_17.2 */
ret_val = e1000e_write_phy_reg_mdic(hw, BM_WUC_ENABLE_REG, phy_reg);
@@ -2782,7 +2782,7 @@ static s32 e1000_set_d0_lplu_state(struct e1000_hw *hw, bool active)
* semaphore before exiting.
**/
static s32 __e1000_read_phy_reg_hv(struct e1000_hw *hw, u32 offset, u16 *data,
- bool locked)
+ bool locked)
{
s32 ret_val;
u16 page = BM_PHY_REG_PAGE(offset);
@@ -2797,13 +2797,13 @@ static s32 __e1000_read_phy_reg_hv(struct e1000_hw *hw, u32 offset, u16 *data,
/* Page 800 works differently than the rest so it has its own func */
if (page == BM_WUC_PAGE) {
ret_val = e1000_access_phy_wakeup_reg_bm(hw, offset,
- data, true);
+ data, true);
goto out;
}
if (page > 0 && page < HV_INTC_FC_PAGE_START) {
ret_val = e1000_access_phy_debug_regs_hv(hw, offset,
- data, true);
+ data, true);
goto out;
}
@@ -2828,7 +2828,7 @@ static s32 __e1000_read_phy_reg_hv(struct e1000_hw *hw, u32 offset, u16 *data,
}
ret_val = e1000e_read_phy_reg_mdic(hw, MAX_PHY_REG_ADDRESS & reg,
- data);
+ data);
out:
if (!locked)
hw->phy.ops.release(hw);
@@ -2876,7 +2876,7 @@ s32 e1000_read_phy_reg_hv_locked(struct e1000_hw *hw, u32 offset, u16 *data)
* at the offset. Release any acquired semaphores before exiting.
**/
static s32 __e1000_write_phy_reg_hv(struct e1000_hw *hw, u32 offset, u16 data,
- bool locked)
+ bool locked)
{
s32 ret_val;
u16 page = BM_PHY_REG_PAGE(offset);
@@ -2891,13 +2891,13 @@ static s32 __e1000_write_phy_reg_hv(struct e1000_hw *hw, u32 offset, u16 data,
/* Page 800 works differently than the rest so it has its own func */
if (page == BM_WUC_PAGE) {
ret_val = e1000_access_phy_wakeup_reg_bm(hw, offset,
- &data, false);
+ &data, false);
goto out;
}
if (page > 0 && page < HV_INTC_FC_PAGE_START) {
ret_val = e1000_access_phy_debug_regs_hv(hw, offset,
- &data, false);
+ &data, false);
goto out;
}
@@ -2917,7 +2917,7 @@ static s32 __e1000_write_phy_reg_hv(struct e1000_hw *hw, u32 offset, u16 data,
(data & (1 << 11))) {
u16 data2 = 0x7EFF;
ret_val = e1000_access_phy_debug_regs_hv(hw, (1 << 6) | 0x3,
- &data2, false);
+ &data2, false);
if (ret_val)
goto out;
}
@@ -2938,7 +2938,7 @@ static s32 __e1000_write_phy_reg_hv(struct e1000_hw *hw, u32 offset, u16 data,
}
ret_val = e1000e_write_phy_reg_mdic(hw, MAX_PHY_REG_ADDRESS & reg,
- data);
+ data);
out:
if (!locked)
@@ -3001,7 +3001,7 @@ static u32 e1000_get_phy_addr_for_hv_page(u32 page)
* to read these regs uses the address port and data port to read/write.
**/
static s32 e1000_access_phy_debug_regs_hv(struct e1000_hw *hw, u32 offset,
- u16 *data, bool read)
+ u16 *data, bool read)
{
s32 ret_val;
u32 addr_reg = 0;
@@ -3009,7 +3009,7 @@ static s32 e1000_access_phy_debug_regs_hv(struct e1000_hw *hw, u32 offset,
/* This takes care of the difference with desktop vs mobile phy */
addr_reg = (hw->phy.type == e1000_phy_82578) ?
- I82578_ADDR_REG : I82577_ADDR_REG;
+ I82578_ADDR_REG : I82577_ADDR_REG;
data_reg = addr_reg + 1;
/* All operations in this function are phy address 2 */
@@ -3067,25 +3067,25 @@ s32 e1000_link_stall_workaround_hv(struct e1000_hw *hw)
goto out;
data &= BM_CS_STATUS_LINK_UP |
- BM_CS_STATUS_RESOLVED |
- BM_CS_STATUS_SPEED_MASK;
+ BM_CS_STATUS_RESOLVED |
+ BM_CS_STATUS_SPEED_MASK;
if (data != (BM_CS_STATUS_LINK_UP |
- BM_CS_STATUS_RESOLVED |
- BM_CS_STATUS_SPEED_1000))
+ BM_CS_STATUS_RESOLVED |
+ BM_CS_STATUS_SPEED_1000))
goto out;
mdelay(200);
/* flush the packets in the fifo buffer */
ret_val = hw->phy.ops.write_reg(hw, HV_MUX_DATA_CTRL,
- HV_MUX_DATA_CTRL_GEN_TO_MAC |
- HV_MUX_DATA_CTRL_FORCE_SPEED);
+ HV_MUX_DATA_CTRL_GEN_TO_MAC |
+ HV_MUX_DATA_CTRL_FORCE_SPEED);
if (ret_val)
goto out;
ret_val = hw->phy.ops.write_reg(hw, HV_MUX_DATA_CTRL,
- HV_MUX_DATA_CTRL_GEN_TO_MAC);
+ HV_MUX_DATA_CTRL_GEN_TO_MAC);
out:
return ret_val;
@@ -3109,8 +3109,8 @@ s32 e1000_check_polarity_82577(struct e1000_hw *hw)
if (!ret_val)
phy->cable_polarity = (data & I82577_PHY_STATUS2_REV_POLARITY)
- ? e1000_rev_polarity_reversed
- : e1000_rev_polarity_normal;
+ ? e1000_rev_polarity_reversed
+ : e1000_rev_polarity_normal;
return ret_val;
}
@@ -3144,9 +3144,9 @@ s32 e1000_phy_force_speed_duplex_82577(struct e1000_hw *hw)
e_dbg("Waiting for forced speed/duplex link on 82577 phy\n");
ret_val = e1000e_phy_has_link_generic(hw,
- PHY_FORCE_LIMIT,
- 100000,
- &link);
+ PHY_FORCE_LIMIT,
+ 100000,
+ &link);
if (ret_val)
goto out;
@@ -3155,9 +3155,9 @@ s32 e1000_phy_force_speed_duplex_82577(struct e1000_hw *hw)
/* Try once more */
ret_val = e1000e_phy_has_link_generic(hw,
- PHY_FORCE_LIMIT,
- 100000,
- &link);
+ PHY_FORCE_LIMIT,
+ 100000,
+ &link);
if (ret_val)
goto out;
}
@@ -3215,12 +3215,12 @@ s32 e1000_get_phy_info_82577(struct e1000_hw *hw)
goto out;
phy->local_rx = (data & SR_1000T_LOCAL_RX_STATUS)
- ? e1000_1000t_rx_status_ok
- : e1000_1000t_rx_status_not_ok;
+ ? e1000_1000t_rx_status_ok
+ : e1000_1000t_rx_status_not_ok;
phy->remote_rx = (data & SR_1000T_REMOTE_RX_STATUS)
- ? e1000_1000t_rx_status_ok
- : e1000_1000t_rx_status_not_ok;
+ ? e1000_1000t_rx_status_ok
+ : e1000_1000t_rx_status_not_ok;
} else {
phy->cable_length = E1000_CABLE_LENGTH_UNDEFINED;
phy->local_rx = e1000_1000t_rx_status_undefined;
@@ -3249,7 +3249,7 @@ s32 e1000_get_cable_length_82577(struct e1000_hw *hw)
goto out;
length = (phy_data & I82577_DSTATUS_CABLE_LENGTH) >>
- I82577_DSTATUS_CABLE_LENGTH_SHIFT;
+ I82577_DSTATUS_CABLE_LENGTH_SHIFT;
if (length == E1000_CABLE_LENGTH_UNDEFINED)
ret_val = -E1000_ERR_PHY;
--
1.7.2.3
^ permalink raw reply related [flat|nested] 27+ messages in thread* [PATCH 1/7] e1000e: cleanup: fix spacing issues
2010-12-09 2:40 [PATCH 0/7] e1000e: cleanup Asbjoern Sloth Toennesen
2010-12-09 2:40 ` [PATCH 1/7] e1000e: cleanup: fix spacing issues Asbjoern Sloth Toennesen
2010-12-09 2:40 ` Asbjoern Sloth Toennesen
@ 2010-12-09 2:40 ` Asbjoern Sloth Toennesen
2010-12-09 2:40 ` [PATCH 2/7] e1000e: cleanup: fix bracket issues Asbjoern Sloth Toennesen
` (19 subsequent siblings)
22 siblings, 0 replies; 27+ messages in thread
From: Asbjoern Sloth Toennesen @ 2010-12-09 2:40 UTC (permalink / raw)
To: Jeff Kirsher, Jeff Kirsher; +Cc: e1000-devel, netdev, linux-kernel
This patch fixes trivial spacing issues in e1000e.
Fixes 187 errors and 59 warnings reported by checkpatch.
Signed-off-by: Asbjoern Sloth Toennesen <asbjorn@asbjorn.biz>
---
drivers/net/e1000e/82571.c | 18 +++---
drivers/net/e1000e/defines.h | 32 ++++++------
drivers/net/e1000e/e1000.h | 14 +++---
drivers/net/e1000e/es2lan.c | 72 ++++++++++++------------
drivers/net/e1000e/ethtool.c | 16 +++---
drivers/net/e1000e/hw.h | 2 +-
drivers/net/e1000e/ich8lan.c | 92 ++++++++++++++++----------------
drivers/net/e1000e/lib.c | 8 ++--
drivers/net/e1000e/netdev.c | 74 +++++++++++++-------------
drivers/net/e1000e/param.c | 2 +-
drivers/net/e1000e/phy.c | 124 +++++++++++++++++++++---------------------
11 files changed, 227 insertions(+), 227 deletions(-)
diff --git a/drivers/net/e1000e/82571.c b/drivers/net/e1000e/82571.c
index 9333921..bbc73ce 100644
--- a/drivers/net/e1000e/82571.c
+++ b/drivers/net/e1000e/82571.c
@@ -1225,12 +1225,12 @@ static void e1000_initialize_hw_bits_82571(struct e1000_hw *hw)
* Ensure that DMA Dynamic Clock gating is disabled on 82571 and 82572
*/
- if ((hw->mac.type == e1000_82571) ||
- (hw->mac.type == e1000_82572)) {
- reg = er32(CTRL_EXT);
- reg &= ~E1000_CTRL_EXT_DMA_DYN_CLK_EN;
- ew32(CTRL_EXT, reg);
- }
+ if ((hw->mac.type == e1000_82571) ||
+ (hw->mac.type == e1000_82572)) {
+ reg = er32(CTRL_EXT);
+ reg &= ~E1000_CTRL_EXT_DMA_DYN_CLK_EN;
+ ew32(CTRL_EXT, reg);
+ }
/* PCI-Ex Control Registers */
@@ -1880,7 +1880,7 @@ static struct e1000_phy_operations e82_phy_ops_igp = {
.set_d0_lplu_state = e1000_set_d0_lplu_state_82571,
.set_d3_lplu_state = e1000e_set_d3_lplu_state,
.write_reg = e1000e_write_phy_reg_igp,
- .cfg_on_link_up = NULL,
+ .cfg_on_link_up = NULL,
};
static struct e1000_phy_operations e82_phy_ops_m88 = {
@@ -1898,7 +1898,7 @@ static struct e1000_phy_operations e82_phy_ops_m88 = {
.set_d0_lplu_state = e1000_set_d0_lplu_state_82571,
.set_d3_lplu_state = e1000e_set_d3_lplu_state,
.write_reg = e1000e_write_phy_reg_m88,
- .cfg_on_link_up = NULL,
+ .cfg_on_link_up = NULL,
};
static struct e1000_phy_operations e82_phy_ops_bm = {
@@ -1916,7 +1916,7 @@ static struct e1000_phy_operations e82_phy_ops_bm = {
.set_d0_lplu_state = e1000_set_d0_lplu_state_82571,
.set_d3_lplu_state = e1000e_set_d3_lplu_state,
.write_reg = e1000e_write_phy_reg_bm2,
- .cfg_on_link_up = NULL,
+ .cfg_on_link_up = NULL,
};
static struct e1000_nvm_operations e82571_nvm_ops = {
diff --git a/drivers/net/e1000e/defines.h b/drivers/net/e1000e/defines.h
index 016ea38..2b969c8 100644
--- a/drivers/net/e1000e/defines.h
+++ b/drivers/net/e1000e/defines.h
@@ -111,19 +111,19 @@
/* mask to determine if packets should be dropped due to frame errors */
#define E1000_RXD_ERR_FRAME_ERR_MASK ( \
- E1000_RXD_ERR_CE | \
- E1000_RXD_ERR_SE | \
- E1000_RXD_ERR_SEQ | \
- E1000_RXD_ERR_CXE | \
- E1000_RXD_ERR_RXE)
+ E1000_RXD_ERR_CE | \
+ E1000_RXD_ERR_SE | \
+ E1000_RXD_ERR_SEQ | \
+ E1000_RXD_ERR_CXE | \
+ E1000_RXD_ERR_RXE)
/* Same mask, but for extended and packet split descriptors */
#define E1000_RXDEXT_ERR_FRAME_ERR_MASK ( \
- E1000_RXDEXT_STATERR_CE | \
- E1000_RXDEXT_STATERR_SE | \
- E1000_RXDEXT_STATERR_SEQ | \
- E1000_RXDEXT_STATERR_CXE | \
- E1000_RXDEXT_STATERR_RXE)
+ E1000_RXDEXT_STATERR_CE | \
+ E1000_RXDEXT_STATERR_SE | \
+ E1000_RXDEXT_STATERR_SEQ | \
+ E1000_RXDEXT_STATERR_CXE | \
+ E1000_RXDEXT_STATERR_RXE)
#define E1000_RXDPS_HDRSTAT_HDRSP 0x00008000
@@ -421,11 +421,11 @@
* o LSC = Link Status Change
*/
#define IMS_ENABLE_MASK ( \
- E1000_IMS_RXT0 | \
- E1000_IMS_TXDW | \
- E1000_IMS_RXDMT0 | \
- E1000_IMS_RXSEQ | \
- E1000_IMS_LSC)
+ E1000_IMS_RXT0 | \
+ E1000_IMS_TXDW | \
+ E1000_IMS_RXDMT0 | \
+ E1000_IMS_RXSEQ | \
+ E1000_IMS_LSC)
/* Interrupt Mask Set */
#define E1000_IMS_TXDW E1000_ICR_TXDW /* Transmit desc written back */
@@ -785,7 +785,7 @@
#define PHY_PAGE_SHIFT 5
#define PHY_REG(page, reg) (((page) << PHY_PAGE_SHIFT) | \
- ((reg) & MAX_PHY_REG_ADDRESS))
+ ((reg) & MAX_PHY_REG_ADDRESS))
/*
* Bits...
diff --git a/drivers/net/e1000e/e1000.h b/drivers/net/e1000e/e1000.h
index fdc67fe..47eb0ba 100644
--- a/drivers/net/e1000e/e1000.h
+++ b/drivers/net/e1000e/e1000.h
@@ -580,12 +580,12 @@ extern s32 e1000e_get_cable_length_igp_2(struct e1000_hw *hw);
extern s32 e1000e_get_phy_info_igp(struct e1000_hw *hw);
extern s32 e1000e_read_phy_reg_igp(struct e1000_hw *hw, u32 offset, u16 *data);
extern s32 e1000e_read_phy_reg_igp_locked(struct e1000_hw *hw, u32 offset,
- u16 *data);
+ u16 *data);
extern s32 e1000e_phy_hw_reset_generic(struct e1000_hw *hw);
extern s32 e1000e_set_d3_lplu_state(struct e1000_hw *hw, bool active);
extern s32 e1000e_write_phy_reg_igp(struct e1000_hw *hw, u32 offset, u16 data);
extern s32 e1000e_write_phy_reg_igp_locked(struct e1000_hw *hw, u32 offset,
- u16 data);
+ u16 data);
extern s32 e1000e_phy_sw_reset(struct e1000_hw *hw);
extern s32 e1000e_phy_force_speed_duplex_m88(struct e1000_hw *hw);
extern s32 e1000e_get_cfg_done(struct e1000_hw *hw);
@@ -603,12 +603,12 @@ extern s32 e1000e_write_phy_reg_bm2(struct e1000_hw *hw, u32 offset, u16 data);
extern void e1000e_phy_force_speed_duplex_setup(struct e1000_hw *hw, u16 *phy_ctrl);
extern s32 e1000e_write_kmrn_reg(struct e1000_hw *hw, u32 offset, u16 data);
extern s32 e1000e_write_kmrn_reg_locked(struct e1000_hw *hw, u32 offset,
- u16 data);
+ u16 data);
extern s32 e1000e_read_kmrn_reg(struct e1000_hw *hw, u32 offset, u16 *data);
extern s32 e1000e_read_kmrn_reg_locked(struct e1000_hw *hw, u32 offset,
- u16 *data);
+ u16 *data);
extern s32 e1000e_phy_has_link_generic(struct e1000_hw *hw, u32 iterations,
- u32 usec_interval, bool *success);
+ u32 usec_interval, bool *success);
extern s32 e1000e_phy_reset_dsp(struct e1000_hw *hw);
extern void e1000_power_up_phy_copper(struct e1000_hw *hw);
extern void e1000_power_down_phy_copper(struct e1000_hw *hw);
@@ -617,10 +617,10 @@ extern s32 e1000e_write_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 data);
extern s32 e1000e_check_downshift(struct e1000_hw *hw);
extern s32 e1000_read_phy_reg_hv(struct e1000_hw *hw, u32 offset, u16 *data);
extern s32 e1000_read_phy_reg_hv_locked(struct e1000_hw *hw, u32 offset,
- u16 *data);
+ u16 *data);
extern s32 e1000_write_phy_reg_hv(struct e1000_hw *hw, u32 offset, u16 data);
extern s32 e1000_write_phy_reg_hv_locked(struct e1000_hw *hw, u32 offset,
- u16 data);
+ u16 data);
extern s32 e1000_link_stall_workaround_hv(struct e1000_hw *hw);
extern s32 e1000_copper_link_setup_82577(struct e1000_hw *hw);
extern s32 e1000_check_polarity_82577(struct e1000_hw *hw);
diff --git a/drivers/net/e1000e/es2lan.c b/drivers/net/e1000e/es2lan.c
index 24f8ac9..afed60f 100644
--- a/drivers/net/e1000e/es2lan.c
+++ b/drivers/net/e1000e/es2lan.c
@@ -114,9 +114,9 @@ static s32 e1000_cfg_kmrn_1000_80003es2lan(struct e1000_hw *hw);
static s32 e1000_cfg_kmrn_10_100_80003es2lan(struct e1000_hw *hw, u16 duplex);
static s32 e1000_cfg_on_link_up_80003es2lan(struct e1000_hw *hw);
static s32 e1000_read_kmrn_reg_80003es2lan(struct e1000_hw *hw, u32 offset,
- u16 *data);
+ u16 *data);
static s32 e1000_write_kmrn_reg_80003es2lan(struct e1000_hw *hw, u32 offset,
- u16 data);
+ u16 data);
static void e1000_power_down_phy_copper_80003es2lan(struct e1000_hw *hw);
/**
@@ -225,8 +225,8 @@ static s32 e1000_init_mac_params_80003es2lan(struct e1000_adapter *adapter)
mac->has_fwsm = true;
/* ARC supported; valid only if manageability features are enabled. */
mac->arc_subsystem_valid =
- (er32(FWSM) & E1000_FWSM_MODE_MASK)
- ? true : false;
+ (er32(FWSM) & E1000_FWSM_MODE_MASK)
+ ? true : false;
/* Adaptive IFS not supported */
mac->adaptive_ifs = false;
@@ -493,14 +493,14 @@ static s32 e1000_read_phy_reg_gg82563_80003es2lan(struct e1000_hw *hw,
udelay(200);
ret_val = e1000e_read_phy_reg_mdic(hw,
- MAX_PHY_REG_ADDRESS & offset,
- data);
+ MAX_PHY_REG_ADDRESS & offset,
+ data);
udelay(200);
} else {
ret_val = e1000e_read_phy_reg_mdic(hw,
- MAX_PHY_REG_ADDRESS & offset,
- data);
+ MAX_PHY_REG_ADDRESS & offset,
+ data);
}
e1000_release_phy_80003es2lan(hw);
@@ -564,14 +564,14 @@ static s32 e1000_write_phy_reg_gg82563_80003es2lan(struct e1000_hw *hw,
udelay(200);
ret_val = e1000e_write_phy_reg_mdic(hw,
- MAX_PHY_REG_ADDRESS & offset,
- data);
+ MAX_PHY_REG_ADDRESS & offset,
+ data);
udelay(200);
} else {
ret_val = e1000e_write_phy_reg_mdic(hw,
- MAX_PHY_REG_ADDRESS & offset,
- data);
+ MAX_PHY_REG_ADDRESS & offset,
+ data);
}
e1000_release_phy_80003es2lan(hw);
@@ -898,9 +898,9 @@ static s32 e1000_init_hw_80003es2lan(struct e1000_hw *hw)
hw->dev_spec.e80003es2lan.mdic_wa_enable = true;
ret_val = e1000_read_kmrn_reg_80003es2lan(hw,
- E1000_KMRNCTRLSTA_OFFSET >>
- E1000_KMRNCTRLSTA_OFFSET_SHIFT,
- &i);
+ E1000_KMRNCTRLSTA_OFFSET >>
+ E1000_KMRNCTRLSTA_OFFSET_SHIFT,
+ &i);
if (!ret_val) {
if ((i & E1000_KMRNCTRLSTA_OPMODE_MASK) ==
E1000_KMRNCTRLSTA_OPMODE_INBAND_MDIO)
@@ -1127,16 +1127,16 @@ static s32 e1000_setup_copper_link_80003es2lan(struct e1000_hw *hw)
* polling the phy; this fixes erroneous timeouts at 10Mbps.
*/
ret_val = e1000_write_kmrn_reg_80003es2lan(hw, GG82563_REG(0x34, 4),
- 0xFFFF);
+ 0xFFFF);
if (ret_val)
return ret_val;
ret_val = e1000_read_kmrn_reg_80003es2lan(hw, GG82563_REG(0x34, 9),
- ®_data);
+ ®_data);
if (ret_val)
return ret_val;
reg_data |= 0x3F;
ret_val = e1000_write_kmrn_reg_80003es2lan(hw, GG82563_REG(0x34, 9),
- reg_data);
+ reg_data);
if (ret_val)
return ret_val;
ret_val = e1000_read_kmrn_reg_80003es2lan(hw,
@@ -1176,7 +1176,7 @@ static s32 e1000_cfg_on_link_up_80003es2lan(struct e1000_hw *hw)
if (hw->phy.media_type == e1000_media_type_copper) {
ret_val = e1000e_get_speed_and_duplex_copper(hw, &speed,
- &duplex);
+ &duplex);
if (ret_val)
return ret_val;
@@ -1206,8 +1206,8 @@ static s32 e1000_cfg_kmrn_10_100_80003es2lan(struct e1000_hw *hw, u16 duplex)
reg_data = E1000_KMRNCTRLSTA_HD_CTRL_10_100_DEFAULT;
ret_val = e1000_write_kmrn_reg_80003es2lan(hw,
- E1000_KMRNCTRLSTA_OFFSET_HD_CTRL,
- reg_data);
+ E1000_KMRNCTRLSTA_OFFSET_HD_CTRL,
+ reg_data);
if (ret_val)
return ret_val;
@@ -1254,8 +1254,8 @@ static s32 e1000_cfg_kmrn_1000_80003es2lan(struct e1000_hw *hw)
reg_data = E1000_KMRNCTRLSTA_HD_CTRL_1000_DEFAULT;
ret_val = e1000_write_kmrn_reg_80003es2lan(hw,
- E1000_KMRNCTRLSTA_OFFSET_HD_CTRL,
- reg_data);
+ E1000_KMRNCTRLSTA_OFFSET_HD_CTRL,
+ reg_data);
if (ret_val)
return ret_val;
@@ -1303,7 +1303,7 @@ static s32 e1000_read_kmrn_reg_80003es2lan(struct e1000_hw *hw, u32 offset,
return ret_val;
kmrnctrlsta = ((offset << E1000_KMRNCTRLSTA_OFFSET_SHIFT) &
- E1000_KMRNCTRLSTA_OFFSET) | E1000_KMRNCTRLSTA_REN;
+ E1000_KMRNCTRLSTA_OFFSET) | E1000_KMRNCTRLSTA_REN;
ew32(KMRNCTRLSTA, kmrnctrlsta);
udelay(2);
@@ -1337,7 +1337,7 @@ static s32 e1000_write_kmrn_reg_80003es2lan(struct e1000_hw *hw, u32 offset,
return ret_val;
kmrnctrlsta = ((offset << E1000_KMRNCTRLSTA_OFFSET_SHIFT) &
- E1000_KMRNCTRLSTA_OFFSET) | data;
+ E1000_KMRNCTRLSTA_OFFSET) | data;
ew32(KMRNCTRLSTA, kmrnctrlsta);
udelay(2);
@@ -1457,18 +1457,18 @@ static struct e1000_phy_operations es2_phy_ops = {
.acquire = e1000_acquire_phy_80003es2lan,
.check_polarity = e1000_check_polarity_m88,
.check_reset_block = e1000e_check_reset_block_generic,
- .commit = e1000e_phy_sw_reset,
- .force_speed_duplex = e1000_phy_force_speed_duplex_80003es2lan,
- .get_cfg_done = e1000_get_cfg_done_80003es2lan,
- .get_cable_length = e1000_get_cable_length_80003es2lan,
- .get_info = e1000e_get_phy_info_m88,
- .read_reg = e1000_read_phy_reg_gg82563_80003es2lan,
+ .commit = e1000e_phy_sw_reset,
+ .force_speed_duplex = e1000_phy_force_speed_duplex_80003es2lan,
+ .get_cfg_done = e1000_get_cfg_done_80003es2lan,
+ .get_cable_length = e1000_get_cable_length_80003es2lan,
+ .get_info = e1000e_get_phy_info_m88,
+ .read_reg = e1000_read_phy_reg_gg82563_80003es2lan,
.release = e1000_release_phy_80003es2lan,
- .reset = e1000e_phy_hw_reset_generic,
- .set_d0_lplu_state = NULL,
- .set_d3_lplu_state = e1000e_set_d3_lplu_state,
- .write_reg = e1000_write_phy_reg_gg82563_80003es2lan,
- .cfg_on_link_up = e1000_cfg_on_link_up_80003es2lan,
+ .reset = e1000e_phy_hw_reset_generic,
+ .set_d0_lplu_state = NULL,
+ .set_d3_lplu_state = e1000e_set_d3_lplu_state,
+ .write_reg = e1000_write_phy_reg_gg82563_80003es2lan,
+ .cfg_on_link_up = e1000_cfg_on_link_up_80003es2lan,
};
static struct e1000_nvm_operations es2_nvm_ops = {
diff --git a/drivers/net/e1000e/ethtool.c b/drivers/net/e1000e/ethtool.c
index 8984d16..8acfbca 100644
--- a/drivers/net/e1000e/ethtool.c
+++ b/drivers/net/e1000e/ethtool.c
@@ -47,7 +47,7 @@ struct e1000_stats {
#define E1000_STAT(m) E1000_STATS, \
sizeof(((struct e1000_adapter *)0)->m), \
- offsetof(struct e1000_adapter, m)
+ offsetof(struct e1000_adapter, m)
#define E1000_NETDEV_STAT(m) NETDEV_STATS, \
sizeof(((struct net_device *)0)->m), \
offsetof(struct net_device, m)
@@ -187,7 +187,7 @@ static int e1000_get_settings(struct net_device *netdev,
if ((hw->phy.media_type == e1000_media_type_copper) &&
netif_carrier_ok(netdev))
ecmd->eth_tp_mdix = hw->phy.is_mdix ? ETH_TP_MDI_X :
- ETH_TP_MDI;
+ ETH_TP_MDI;
else
ecmd->eth_tp_mdix = ETH_TP_MDI_INVALID;
@@ -830,7 +830,7 @@ static int e1000_reg_test(struct e1000_adapter *adapter, u64 *data)
case e1000_80003es2lan:
toggle = 0x7FFFF3FF;
break;
- default:
+ default:
toggle = 0x7FFFF033;
break;
}
@@ -890,7 +890,7 @@ static int e1000_reg_test(struct e1000_adapter *adapter, u64 *data)
}
for (i = 0; i < mac->rar_entry_count; i++)
REG_PATTERN_TEST_ARRAY(E1000_RA, ((i << 1) + 1),
- mask, 0xFFFFFFFF);
+ mask, 0xFFFFFFFF);
for (i = 0; i < mac->mta_reg_count; i++)
REG_PATTERN_TEST_ARRAY(E1000_MTA, i, 0xFFFFFFFF, 0xFFFFFFFF);
@@ -1796,8 +1796,8 @@ static void e1000_get_wol(struct net_device *netdev,
return;
wol->supported = WAKE_UCAST | WAKE_MCAST |
- WAKE_BCAST | WAKE_MAGIC |
- WAKE_PHY | WAKE_ARP;
+ WAKE_BCAST | WAKE_MAGIC |
+ WAKE_PHY | WAKE_ARP;
/* apply any specific unsupported masks here */
if (adapter->flags & FLAG_NO_WAKE_UCAST) {
@@ -1830,7 +1830,7 @@ static int e1000_set_wol(struct net_device *netdev,
if (!(adapter->flags & FLAG_HAS_WOL) ||
!device_can_wakeup(&adapter->pdev->dev) ||
(wol->wolopts & ~(WAKE_UCAST | WAKE_MCAST | WAKE_BCAST |
- WAKE_MAGIC | WAKE_PHY | WAKE_ARP)))
+ WAKE_MAGIC | WAKE_PHY | WAKE_ARP)))
return -EOPNOTSUPP;
/* these settings will always override what we currently have */
@@ -1863,7 +1863,7 @@ static int e1000_set_wol(struct net_device *netdev,
static void e1000e_led_blink_task(struct work_struct *work)
{
struct e1000_adapter *adapter = container_of(work,
- struct e1000_adapter, led_blink_task);
+ struct e1000_adapter, led_blink_task);
if (test_and_change_bit(E1000_LED_ON, &adapter->led_status))
adapter->hw.mac.ops.led_off(&adapter->hw);
diff --git a/drivers/net/e1000e/hw.h b/drivers/net/e1000e/hw.h
index ba302a5..0a319e1 100644
--- a/drivers/net/e1000e/hw.h
+++ b/drivers/net/e1000e/hw.h
@@ -37,7 +37,7 @@ struct e1000_adapter;
#include "defines.h"
#define er32(reg) __er32(hw, E1000_##reg)
-#define ew32(reg,val) __ew32(hw, E1000_##reg, (val))
+#define ew32(reg, val) __ew32(hw, E1000_##reg, (val))
#define e1e_flush() er32(STATUS)
#define E1000_WRITE_REG_ARRAY(a, reg, offset, value) \
diff --git a/drivers/net/e1000e/ich8lan.c b/drivers/net/e1000e/ich8lan.c
index e3374d9..53edfd4 100644
--- a/drivers/net/e1000e/ich8lan.c
+++ b/drivers/net/e1000e/ich8lan.c
@@ -267,8 +267,8 @@ static inline void __ew32flash(struct e1000_hw *hw, unsigned long reg, u32 val)
#define er16flash(reg) __er16flash(hw, (reg))
#define er32flash(reg) __er32flash(hw, (reg))
-#define ew16flash(reg,val) __ew16flash(hw, (reg), (val))
-#define ew32flash(reg,val) __ew32flash(hw, (reg), (val))
+#define ew16flash(reg, val) __ew16flash(hw, (reg), (val))
+#define ew32flash(reg, val) __ew32flash(hw, (reg), (val))
/**
* e1000_init_phy_params_pchlan - Initialize PHY function pointers
@@ -1098,46 +1098,46 @@ static s32 e1000_k1_gig_workaround_hv(struct e1000_hw *hw, bool link)
if (link) {
if (hw->phy.type == e1000_phy_82578) {
ret_val = hw->phy.ops.read_reg_locked(hw, BM_CS_STATUS,
- &status_reg);
+ &status_reg);
if (ret_val)
goto release;
status_reg &= BM_CS_STATUS_LINK_UP |
- BM_CS_STATUS_RESOLVED |
- BM_CS_STATUS_SPEED_MASK;
+ BM_CS_STATUS_RESOLVED |
+ BM_CS_STATUS_SPEED_MASK;
if (status_reg == (BM_CS_STATUS_LINK_UP |
- BM_CS_STATUS_RESOLVED |
- BM_CS_STATUS_SPEED_1000))
+ BM_CS_STATUS_RESOLVED |
+ BM_CS_STATUS_SPEED_1000))
k1_enable = false;
}
if (hw->phy.type == e1000_phy_82577) {
ret_val = hw->phy.ops.read_reg_locked(hw, HV_M_STATUS,
- &status_reg);
+ &status_reg);
if (ret_val)
goto release;
status_reg &= HV_M_STATUS_LINK_UP |
- HV_M_STATUS_AUTONEG_COMPLETE |
- HV_M_STATUS_SPEED_MASK;
+ HV_M_STATUS_AUTONEG_COMPLETE |
+ HV_M_STATUS_SPEED_MASK;
if (status_reg == (HV_M_STATUS_LINK_UP |
- HV_M_STATUS_AUTONEG_COMPLETE |
- HV_M_STATUS_SPEED_1000))
+ HV_M_STATUS_AUTONEG_COMPLETE |
+ HV_M_STATUS_SPEED_1000))
k1_enable = false;
}
/* Link stall fix for link up */
ret_val = hw->phy.ops.write_reg_locked(hw, PHY_REG(770, 19),
- 0x0100);
+ 0x0100);
if (ret_val)
goto release;
} else {
/* Link stall fix for link down */
ret_val = hw->phy.ops.write_reg_locked(hw, PHY_REG(770, 19),
- 0x4100);
+ 0x4100);
if (ret_val)
goto release;
}
@@ -1169,8 +1169,8 @@ s32 e1000_configure_k1_ich8lan(struct e1000_hw *hw, bool k1_enable)
u16 kmrn_reg = 0;
ret_val = e1000e_read_kmrn_reg_locked(hw,
- E1000_KMRNCTRLSTA_K1_CONFIG,
- &kmrn_reg);
+ E1000_KMRNCTRLSTA_K1_CONFIG,
+ &kmrn_reg);
if (ret_val)
goto out;
@@ -1180,8 +1180,8 @@ s32 e1000_configure_k1_ich8lan(struct e1000_hw *hw, bool k1_enable)
kmrn_reg &= ~E1000_KMRNCTRLSTA_K1_ENABLE;
ret_val = e1000e_write_kmrn_reg_locked(hw,
- E1000_KMRNCTRLSTA_K1_CONFIG,
- kmrn_reg);
+ E1000_KMRNCTRLSTA_K1_CONFIG,
+ kmrn_reg);
if (ret_val)
goto out;
@@ -1356,13 +1356,13 @@ static s32 e1000_hv_phy_workarounds_ich8lan(struct e1000_hw *hw)
if (ret_val)
goto out;
ret_val = hw->phy.ops.read_reg_locked(hw,
- PHY_REG(BM_PORT_CTRL_PAGE, 17),
- &phy_data);
+ PHY_REG(BM_PORT_CTRL_PAGE, 17),
+ &phy_data);
if (ret_val)
goto release;
ret_val = hw->phy.ops.write_reg_locked(hw,
- PHY_REG(BM_PORT_CTRL_PAGE, 17),
- phy_data & 0x00FF);
+ PHY_REG(BM_PORT_CTRL_PAGE, 17),
+ phy_data & 0x00FF);
release:
hw->phy.ops.release(hw);
out:
@@ -2015,7 +2015,7 @@ static s32 e1000_valid_nvm_bank_detect_ich8lan(struct e1000_hw *hw, u32 *bank)
/* Check bank 0 */
ret_val = e1000_read_flash_byte_ich8lan(hw, act_offset,
- &sig_byte);
+ &sig_byte);
if (ret_val)
return ret_val;
if ((sig_byte & E1000_ICH_NVM_VALID_SIG_MASK) ==
@@ -2026,8 +2026,8 @@ static s32 e1000_valid_nvm_bank_detect_ich8lan(struct e1000_hw *hw, u32 *bank)
/* Check bank 1 */
ret_val = e1000_read_flash_byte_ich8lan(hw, act_offset +
- bank1_offset,
- &sig_byte);
+ bank1_offset,
+ &sig_byte);
if (ret_val)
return ret_val;
if ((sig_byte & E1000_ICH_NVM_VALID_SIG_MASK) ==
@@ -2428,8 +2428,8 @@ static s32 e1000_update_nvm_checksum_ich8lan(struct e1000_hw *hw)
data = dev_spec->shadow_ram[i].value;
} else {
ret_val = e1000_read_flash_word_ich8lan(hw, i +
- old_bank_offset,
- &data);
+ old_bank_offset,
+ &data);
if (ret_val)
break;
}
@@ -2640,7 +2640,7 @@ static s32 e1000_write_flash_data_ich8lan(struct e1000_hw *hw, u32 offset,
hsflctl.regval = er16flash(ICH_FLASH_HSFCTL);
/* 0b/1b corresponds to 1 or 2 byte size, respectively. */
- hsflctl.hsf_ctrl.fldbcount = size -1;
+ hsflctl.hsf_ctrl.fldbcount = size - 1;
hsflctl.hsf_ctrl.flcycle = ICH_CYCLE_WRITE;
ew16flash(ICH_FLASH_HSFCTL, hsflctl.regval);
@@ -3272,8 +3272,8 @@ static s32 e1000_setup_link_ich8lan(struct e1000_hw *hw)
ew32(FCRTV_PCH, hw->fc.refresh_time);
ret_val = hw->phy.ops.write_reg(hw,
- PHY_REG(BM_PORT_CTRL_PAGE, 27),
- hw->fc.pause_time);
+ PHY_REG(BM_PORT_CTRL_PAGE, 27),
+ hw->fc.pause_time);
if (ret_val)
return ret_val;
}
@@ -3309,12 +3309,12 @@ static s32 e1000_setup_copper_link_ich8lan(struct e1000_hw *hw)
if (ret_val)
return ret_val;
ret_val = e1000e_read_kmrn_reg(hw, E1000_KMRNCTRLSTA_INBAND_PARAM,
- ®_data);
+ ®_data);
if (ret_val)
return ret_val;
reg_data |= 0x3F;
ret_val = e1000e_write_kmrn_reg(hw, E1000_KMRNCTRLSTA_INBAND_PARAM,
- reg_data);
+ reg_data);
if (ret_val)
return ret_val;
@@ -3338,7 +3338,7 @@ static s32 e1000_setup_copper_link_ich8lan(struct e1000_hw *hw)
break;
case e1000_phy_ife:
ret_val = hw->phy.ops.read_reg(hw, IFE_PHY_MDIX_CONTROL,
- ®_data);
+ ®_data);
if (ret_val)
return ret_val;
@@ -3357,7 +3357,7 @@ static s32 e1000_setup_copper_link_ich8lan(struct e1000_hw *hw)
break;
}
ret_val = hw->phy.ops.write_reg(hw, IFE_PHY_MDIX_CONTROL,
- reg_data);
+ reg_data);
if (ret_val)
return ret_val;
break;
@@ -3857,21 +3857,21 @@ static void e1000_clear_hw_cntrs_ich8lan(struct e1000_hw *hw)
}
static struct e1000_mac_operations ich8_mac_ops = {
- .id_led_init = e1000e_id_led_init,
+ .id_led_init = e1000e_id_led_init,
/* check_mng_mode dependent on mac type */
- .check_for_link = e1000_check_for_copper_link_ich8lan,
+ .check_for_link = e1000_check_for_copper_link_ich8lan,
/* cleanup_led dependent on mac type */
- .clear_hw_cntrs = e1000_clear_hw_cntrs_ich8lan,
- .get_bus_info = e1000_get_bus_info_ich8lan,
- .set_lan_id = e1000_set_lan_id_single_port,
- .get_link_up_info = e1000_get_link_up_info_ich8lan,
+ .clear_hw_cntrs = e1000_clear_hw_cntrs_ich8lan,
+ .get_bus_info = e1000_get_bus_info_ich8lan,
+ .set_lan_id = e1000_set_lan_id_single_port,
+ .get_link_up_info = e1000_get_link_up_info_ich8lan,
/* led_on dependent on mac type */
/* led_off dependent on mac type */
- .update_mc_addr_list = e1000e_update_mc_addr_list_generic,
- .reset_hw = e1000_reset_hw_ich8lan,
- .init_hw = e1000_init_hw_ich8lan,
- .setup_link = e1000_setup_link_ich8lan,
- .setup_physical_interface= e1000_setup_copper_link_ich8lan,
+ .update_mc_addr_list = e1000e_update_mc_addr_list_generic,
+ .reset_hw = e1000_reset_hw_ich8lan,
+ .init_hw = e1000_init_hw_ich8lan,
+ .setup_link = e1000_setup_link_ich8lan,
+ .setup_physical_interface = e1000_setup_copper_link_ich8lan,
/* id_led_init dependent on mac type */
};
@@ -3891,7 +3891,7 @@ static struct e1000_phy_operations ich8_phy_ops = {
static struct e1000_nvm_operations ich8_nvm_ops = {
.acquire = e1000_acquire_nvm_ich8lan,
- .read = e1000_read_nvm_ich8lan,
+ .read = e1000_read_nvm_ich8lan,
.release = e1000_release_nvm_ich8lan,
.update = e1000_update_nvm_checksum_ich8lan,
.valid_led_default = e1000_valid_led_default_ich8lan,
diff --git a/drivers/net/e1000e/lib.c b/drivers/net/e1000e/lib.c
index 0fd4eb5..20870b2 100644
--- a/drivers/net/e1000e/lib.c
+++ b/drivers/net/e1000e/lib.c
@@ -194,7 +194,7 @@ s32 e1000_check_alt_mac_addr_generic(struct e1000_hw *hw)
goto out;
ret_val = e1000_read_nvm(hw, NVM_ALT_MAC_ADDR_PTR, 1,
- &nvm_alt_mac_addr_offset);
+ &nvm_alt_mac_addr_offset);
if (ret_val) {
e_dbg("NVM Read Error\n");
goto out;
@@ -1505,10 +1505,10 @@ s32 e1000e_setup_led_generic(struct e1000_hw *hw)
hw->mac.ledctl_default = ledctl;
/* Turn off LED0 */
ledctl &= ~(E1000_LEDCTL_LED0_IVRT |
- E1000_LEDCTL_LED0_BLINK |
- E1000_LEDCTL_LED0_MODE_MASK);
+ E1000_LEDCTL_LED0_BLINK |
+ E1000_LEDCTL_LED0_MODE_MASK);
ledctl |= (E1000_LEDCTL_MODE_LED_OFF <<
- E1000_LEDCTL_LED0_MODE_SHIFT);
+ E1000_LEDCTL_LED0_MODE_SHIFT);
ew32(LEDCTL, ledctl);
} else if (hw->phy.media_type == e1000_media_type_copper) {
ew32(LEDCTL, hw->mac.ledctl_mode1);
diff --git a/drivers/net/e1000e/netdev.c b/drivers/net/e1000e/netdev.c
index 0adcb79..820ea48 100644
--- a/drivers/net/e1000e/netdev.c
+++ b/drivers/net/e1000e/netdev.c
@@ -682,7 +682,7 @@ no_buffers:
**/
static void e1000_alloc_jumbo_rx_buffers(struct e1000_adapter *adapter,
- int cleaned_count)
+ int cleaned_count)
{
struct net_device *netdev = adapter->netdev;
struct pci_dev *pdev = adapter->pdev;
@@ -723,8 +723,8 @@ check_page:
if (!buffer_info->dma)
buffer_info->dma = dma_map_page(&pdev->dev,
- buffer_info->page, 0,
- PAGE_SIZE,
+ buffer_info->page, 0,
+ PAGE_SIZE,
DMA_FROM_DEVICE);
rx_desc = E1000_RX_DESC(*rx_ring, i);
@@ -921,8 +921,8 @@ static void e1000_put_txbuf(struct e1000_adapter *adapter,
static void e1000_print_hw_hang(struct work_struct *work)
{
struct e1000_adapter *adapter = container_of(work,
- struct e1000_adapter,
- print_hang_task);
+ struct e1000_adapter,
+ print_hang_task);
struct e1000_ring *tx_ring = adapter->tx_ring;
unsigned int i = tx_ring->next_to_clean;
unsigned int eop = tx_ring->buffer_info[i].next_to_watch;
@@ -1249,7 +1249,7 @@ next_desc:
* e1000_consume_page - helper function
**/
static void e1000_consume_page(struct e1000_buffer *bi, struct sk_buff *skb,
- u16 length)
+ u16 length)
{
bi->page = NULL;
skb->len += length;
@@ -1266,7 +1266,7 @@ static void e1000_consume_page(struct e1000_buffer *bi, struct sk_buff *skb,
**/
static bool e1000_clean_jumbo_rx_irq(struct e1000_adapter *adapter,
- int *work_done, int work_to_do)
+ int *work_done, int work_to_do)
{
struct net_device *netdev = adapter->netdev;
struct pci_dev *pdev = adapter->pdev;
@@ -1277,7 +1277,7 @@ static bool e1000_clean_jumbo_rx_irq(struct e1000_adapter *adapter,
unsigned int i;
int cleaned_count = 0;
bool cleaned = false;
- unsigned int total_rx_bytes=0, total_rx_packets=0;
+ unsigned int total_rx_bytes = 0, total_rx_packets = 0;
i = rx_ring->next_to_clean;
rx_desc = E1000_RX_DESC(*rx_ring, i);
@@ -1332,7 +1332,7 @@ static bool e1000_clean_jumbo_rx_irq(struct e1000_adapter *adapter,
/* this is the beginning of a chain */
rxtop = skb;
skb_fill_page_desc(rxtop, 0, buffer_info->page,
- 0, length);
+ 0, length);
} else {
/* this is the middle of a chain */
skb_fill_page_desc(rxtop,
@@ -1362,29 +1362,29 @@ static bool e1000_clean_jumbo_rx_irq(struct e1000_adapter *adapter,
skb_tailroom(skb) >= length) {
u8 *vaddr;
vaddr = kmap_atomic(buffer_info->page,
- KM_SKB_DATA_SOFTIRQ);
+ KM_SKB_DATA_SOFTIRQ);
memcpy(skb_tail_pointer(skb), vaddr,
length);
kunmap_atomic(vaddr,
- KM_SKB_DATA_SOFTIRQ);
+ KM_SKB_DATA_SOFTIRQ);
/* re-use the page, so don't erase
* buffer_info->page */
skb_put(skb, length);
} else {
skb_fill_page_desc(skb, 0,
- buffer_info->page, 0,
- length);
+ buffer_info->page, 0,
+ length);
e1000_consume_page(buffer_info, skb,
- length);
+ length);
}
}
}
/* Receive Checksum Offload XXX recompute due to CRC strip? */
e1000_rx_checksum(adapter,
- (u32)(status) |
- ((u32)(rx_desc->errors) << 24),
- le16_to_cpu(rx_desc->csum), skb);
+ (u32)(status) |
+ ((u32)(rx_desc->errors) << 24),
+ le16_to_cpu(rx_desc->csum), skb);
/* probably a little skewed due to removing CRC */
total_rx_bytes += skb->len;
@@ -1398,7 +1398,7 @@ static bool e1000_clean_jumbo_rx_irq(struct e1000_adapter *adapter,
}
e1000_receive_skb(adapter, netdev, skb, status,
- rx_desc->special);
+ rx_desc->special);
next_desc:
rx_desc->status = 0;
@@ -1448,7 +1448,7 @@ static void e1000_clean_rx_ring(struct e1000_adapter *adapter)
DMA_FROM_DEVICE);
else if (adapter->clean_rx == e1000_clean_jumbo_rx_irq)
dma_unmap_page(&pdev->dev, buffer_info->dma,
- PAGE_SIZE,
+ PAGE_SIZE,
DMA_FROM_DEVICE);
else if (adapter->clean_rx == e1000_clean_rx_irq_ps)
dma_unmap_single(&pdev->dev, buffer_info->dma,
@@ -4034,11 +4034,11 @@ static void e1000_print_link_info(struct e1000_adapter *adapter)
adapter->netdev->name,
adapter->link_speed,
(adapter->link_duplex == FULL_DUPLEX) ?
- "Full Duplex" : "Half Duplex",
+ "Full Duplex" : "Half Duplex",
((ctrl & E1000_CTRL_TFCE) && (ctrl & E1000_CTRL_RFCE)) ?
- "RX/TX" :
+ "RX/TX" :
((ctrl & E1000_CTRL_RFCE) ? "RX" :
- ((ctrl & E1000_CTRL_TFCE) ? "TX" : "None" )));
+ ((ctrl & E1000_CTRL_TFCE) ? "TX" : "None")));
}
static bool e1000e_has_link(struct e1000_adapter *adapter)
@@ -4243,7 +4243,7 @@ static void e1000_watchdog_task(struct work_struct *work)
tctl |= E1000_TCTL_EN;
ew32(TCTL, tctl);
- /*
+ /*
* Perform any post-link-up configuration before
* reporting link up.
*/
@@ -4394,14 +4394,14 @@ static int e1000_tso(struct e1000_adapter *adapter,
iph->tot_len = 0;
iph->check = 0;
tcp_hdr(skb)->check = ~csum_tcpudp_magic(iph->saddr, iph->daddr,
- 0, IPPROTO_TCP, 0);
+ 0, IPPROTO_TCP, 0);
cmd_length = E1000_TXD_CMD_IP;
ipcse = skb_transport_offset(skb) - 1;
} else if (skb_is_gso_v6(skb)) {
ipv6_hdr(skb)->payload_len = 0;
tcp_hdr(skb)->check = ~csum_ipv6_magic(&ipv6_hdr(skb)->saddr,
- &ipv6_hdr(skb)->daddr,
- 0, IPPROTO_TCP, 0);
+ &ipv6_hdr(skb)->daddr,
+ 0, IPPROTO_TCP, 0);
ipcse = 0;
}
ipcss = skb_network_offset(skb);
@@ -4411,7 +4411,7 @@ static int e1000_tso(struct e1000_adapter *adapter,
tucse = 0;
cmd_length |= (E1000_TXD_CMD_DEXT | E1000_TXD_CMD_TSE |
- E1000_TXD_CMD_TCP | (skb->len - (hdr_len)));
+ E1000_TXD_CMD_TCP | (skb->len - (hdr_len)));
i = tx_ring->next_to_use;
context_desc = E1000_CONTEXT_DESC(*tx_ring, i);
@@ -4589,7 +4589,7 @@ dma_error:
count--;
while (count--) {
- if (i==0)
+ if (i == 0)
i += tx_ring->count;
i--;
buffer_info = &tx_ring->buffer_info[i];
@@ -4734,7 +4734,7 @@ static int e1000_maybe_stop_tx(struct net_device *netdev, int size)
return __e1000_maybe_stop_tx(netdev, size);
}
-#define TXD_USE_COUNT(S, X) (((S) >> (X)) + 1 )
+#define TXD_USE_COUNT(S, X) (((S) >> (X)) + 1)
static netdev_tx_t e1000_xmit_frame(struct sk_buff *skb,
struct net_device *netdev)
{
@@ -5105,7 +5105,7 @@ static int e1000_init_phy_wakeup(struct e1000_adapter *adapter, u32 wufc)
return retval;
}
e1000e_write_phy_reg_mdic(hw, IGP01E1000_PHY_PAGE_SELECT,
- (BM_WUC_ENABLE_PAGE << IGP_PAGE_SHIFT));
+ (BM_WUC_ENABLE_PAGE << IGP_PAGE_SHIFT));
retval = e1000e_read_phy_reg_mdic(hw, BM_WUC_ENABLE_REG, &phy_reg);
if (retval) {
e_err("Could not read PHY page 769\n");
@@ -5233,7 +5233,7 @@ static void e1000_power_off(struct pci_dev *pdev, bool sleep, bool wake)
}
static void e1000_complete_shutdown(struct pci_dev *pdev, bool sleep,
- bool wake)
+ bool wake)
{
struct net_device *netdev = pci_get_drvdata(pdev);
struct e1000_adapter *adapter = netdev_priv(netdev);
@@ -5251,7 +5251,7 @@ static void e1000_complete_shutdown(struct pci_dev *pdev, bool sleep,
pci_read_config_word(us_dev, pos + PCI_EXP_DEVCTL, &devctl);
pci_write_config_word(us_dev, pos + PCI_EXP_DEVCTL,
- (devctl & ~PCI_EXP_DEVCTL_CERE));
+ (devctl & ~PCI_EXP_DEVCTL_CERE));
e1000_power_off(pdev, sleep, wake);
@@ -5632,7 +5632,7 @@ static void e1000_print_device_info(struct e1000_adapter *adapter)
e_info("(PCI Express:2.5GB/s:%s) %pM\n",
/* bus width */
((hw->bus.width == e1000_bus_width_pcie_x4) ? "Width x4" :
- "Width x1"),
+ "Width x1"),
/* MAC address */
netdev->dev_addr);
e_info("Intel(R) PRO/%s Network Connection\n",
@@ -5732,8 +5732,8 @@ static int __devinit e1000_probe(struct pci_dev *pdev,
}
err = pci_request_selected_regions_exclusive(pdev,
- pci_select_bars(pdev, IORESOURCE_MEM),
- e1000e_driver_name);
+ pci_select_bars(pdev, IORESOURCE_MEM),
+ e1000e_driver_name);
if (err)
goto err_pci_reg;
@@ -6000,7 +6000,7 @@ err_ioremap:
free_netdev(netdev);
err_alloc_etherdev:
pci_release_selected_regions(pdev,
- pci_select_bars(pdev, IORESOURCE_MEM));
+ pci_select_bars(pdev, IORESOURCE_MEM));
err_pci_reg:
err_dma:
pci_disable_device(pdev);
@@ -6063,7 +6063,7 @@ static void __devexit e1000_remove(struct pci_dev *pdev)
if (adapter->hw.flash_address)
iounmap(adapter->hw.flash_address);
pci_release_selected_regions(pdev,
- pci_select_bars(pdev, IORESOURCE_MEM));
+ pci_select_bars(pdev, IORESOURCE_MEM));
free_netdev(netdev);
diff --git a/drivers/net/e1000e/param.c b/drivers/net/e1000e/param.c
index 3d36911..2687295 100644
--- a/drivers/net/e1000e/param.c
+++ b/drivers/net/e1000e/param.c
@@ -157,7 +157,7 @@ E1000_PARAM(WriteProtectNVM, "Write-protect NVM [WARNING: disabling this can lea
* Default Value: 1 (enabled)
*/
E1000_PARAM(CrcStripping, "Enable CRC Stripping, disable if your BMC needs " \
- "the CRC");
+ "the CRC");
struct e1000_option {
enum { enable_option, range_option, list_option } type;
diff --git a/drivers/net/e1000e/phy.c b/drivers/net/e1000e/phy.c
index 3d3dc0c..a26c296 100644
--- a/drivers/net/e1000e/phy.c
+++ b/drivers/net/e1000e/phy.c
@@ -39,7 +39,7 @@ static s32 e1000_access_phy_wakeup_reg_bm(struct e1000_hw *hw, u32 offset,
u16 *data, bool read);
static u32 e1000_get_phy_addr_for_hv_page(u32 page);
static s32 e1000_access_phy_debug_regs_hv(struct e1000_hw *hw, u32 offset,
- u16 *data, bool read);
+ u16 *data, bool read);
/* Cable length tables */
static const u16 e1000_m88_cable_length_table[] =
@@ -345,7 +345,7 @@ s32 e1000e_write_phy_reg_m88(struct e1000_hw *hw, u32 offset, u16 data)
* semaphores before exiting.
**/
static s32 __e1000e_read_phy_reg_igp(struct e1000_hw *hw, u32 offset, u16 *data,
- bool locked)
+ bool locked)
{
s32 ret_val = 0;
@@ -367,7 +367,7 @@ static s32 __e1000e_read_phy_reg_igp(struct e1000_hw *hw, u32 offset, u16 *data,
}
ret_val = e1000e_read_phy_reg_mdic(hw, MAX_PHY_REG_ADDRESS & offset,
- data);
+ data);
release:
if (!locked)
@@ -416,7 +416,7 @@ s32 e1000e_read_phy_reg_igp_locked(struct e1000_hw *hw, u32 offset, u16 *data)
* at the offset. Release any acquired semaphores before exiting.
**/
static s32 __e1000e_write_phy_reg_igp(struct e1000_hw *hw, u32 offset, u16 data,
- bool locked)
+ bool locked)
{
s32 ret_val = 0;
@@ -488,7 +488,7 @@ s32 e1000e_write_phy_reg_igp_locked(struct e1000_hw *hw, u32 offset, u16 data)
* Release any acquired semaphores before exiting.
**/
static s32 __e1000_read_kmrn_reg(struct e1000_hw *hw, u32 offset, u16 *data,
- bool locked)
+ bool locked)
{
u32 kmrnctrlsta;
s32 ret_val = 0;
@@ -560,7 +560,7 @@ s32 e1000e_read_kmrn_reg_locked(struct e1000_hw *hw, u32 offset, u16 *data)
* before exiting.
**/
static s32 __e1000_write_kmrn_reg(struct e1000_hw *hw, u32 offset, u16 data,
- bool locked)
+ bool locked)
{
u32 kmrnctrlsta;
s32 ret_val = 0;
@@ -761,7 +761,7 @@ s32 e1000e_copper_link_setup_m88(struct e1000_hw *hw)
if (phy->type == e1000_phy_82578) {
ret_val = phy->ops.read_reg(hw, M88E1000_EXT_PHY_SPEC_CTRL,
- &phy_data);
+ &phy_data);
if (ret_val)
return ret_val;
@@ -769,7 +769,7 @@ s32 e1000e_copper_link_setup_m88(struct e1000_hw *hw)
phy_data |= I82578_EPSCR_DOWNSHIFT_ENABLE;
phy_data &= ~I82578_EPSCR_DOWNSHIFT_COUNTER_MASK;
ret_val = phy->ops.write_reg(hw, M88E1000_EXT_PHY_SPEC_CTRL,
- phy_data);
+ phy_data);
if (ret_val)
return ret_val;
}
@@ -1400,9 +1400,9 @@ s32 e1000_phy_force_speed_duplex_ife(struct e1000_hw *hw)
e_dbg("Waiting for forced speed/duplex link on IFE phy.\n");
ret_val = e1000e_phy_has_link_generic(hw,
- PHY_FORCE_LIMIT,
- 100000,
- &link);
+ PHY_FORCE_LIMIT,
+ 100000,
+ &link);
if (ret_val)
goto out;
@@ -1411,9 +1411,9 @@ s32 e1000_phy_force_speed_duplex_ife(struct e1000_hw *hw)
/* Try once more */
ret_val = e1000e_phy_has_link_generic(hw,
- PHY_FORCE_LIMIT,
- 100000,
- &link);
+ PHY_FORCE_LIMIT,
+ 100000,
+ &link);
if (ret_val)
goto out;
}
@@ -1698,8 +1698,8 @@ s32 e1000_check_polarity_ife(struct e1000_hw *hw)
if (!ret_val)
phy->cable_polarity = (phy_data & mask)
- ? e1000_rev_polarity_reversed
- : e1000_rev_polarity_normal;
+ ? e1000_rev_polarity_reversed
+ : e1000_rev_polarity_normal;
return ret_val;
}
@@ -1807,7 +1807,7 @@ s32 e1000e_get_cable_length_m88(struct e1000_hw *hw)
goto out;
index = (phy_data & M88E1000_PSSR_CABLE_LENGTH) >>
- M88E1000_PSSR_CABLE_LENGTH_SHIFT;
+ M88E1000_PSSR_CABLE_LENGTH_SHIFT;
if (index >= M88E1000_CABLE_LENGTH_TABLE_SIZE - 1) {
ret_val = -E1000_ERR_PHY;
goto out;
@@ -2055,7 +2055,7 @@ s32 e1000_get_phy_info_ife(struct e1000_hw *hw)
if (ret_val)
goto out;
phy->polarity_correction = (data & IFE_PSC_AUTO_POLARITY_DISABLE)
- ? false : true;
+ ? false : true;
if (phy->polarity_correction) {
ret_val = e1000_check_polarity_ife(hw);
@@ -2064,8 +2064,8 @@ s32 e1000_get_phy_info_ife(struct e1000_hw *hw)
} else {
/* Polarity is forced */
phy->cable_polarity = (data & IFE_PSC_FORCE_POLARITY)
- ? e1000_rev_polarity_reversed
- : e1000_rev_polarity_normal;
+ ? e1000_rev_polarity_reversed
+ : e1000_rev_polarity_normal;
}
ret_val = e1e_rphy(hw, IFE_PHY_MDIX_CONTROL, &data);
@@ -2432,13 +2432,13 @@ s32 e1000e_write_phy_reg_bm(struct e1000_hw *hw, u32 offset, u16 data)
/* Page is shifted left, PHY expects (page x 32) */
ret_val = e1000e_write_phy_reg_mdic(hw, page_select,
- (page << page_shift));
+ (page << page_shift));
if (ret_val)
goto out;
}
ret_val = e1000e_write_phy_reg_mdic(hw, MAX_PHY_REG_ADDRESS & offset,
- data);
+ data);
out:
hw->phy.ops.release(hw);
@@ -2491,13 +2491,13 @@ s32 e1000e_read_phy_reg_bm(struct e1000_hw *hw, u32 offset, u16 *data)
/* Page is shifted left, PHY expects (page x 32) */
ret_val = e1000e_write_phy_reg_mdic(hw, page_select,
- (page << page_shift));
+ (page << page_shift));
if (ret_val)
goto out;
}
ret_val = e1000e_read_phy_reg_mdic(hw, MAX_PHY_REG_ADDRESS & offset,
- data);
+ data);
out:
hw->phy.ops.release(hw);
return ret_val;
@@ -2628,7 +2628,7 @@ static s32 e1000_access_phy_wakeup_reg_bm(struct e1000_hw *hw, u32 offset,
/* Set page 769 */
e1000e_write_phy_reg_mdic(hw, IGP01E1000_PHY_PAGE_SELECT,
- (BM_WUC_ENABLE_PAGE << IGP_PAGE_SHIFT));
+ (BM_WUC_ENABLE_PAGE << IGP_PAGE_SHIFT));
ret_val = e1000e_read_phy_reg_mdic(hw, BM_WUC_ENABLE_REG, &phy_reg);
if (ret_val) {
@@ -2646,7 +2646,7 @@ static s32 e1000_access_phy_wakeup_reg_bm(struct e1000_hw *hw, u32 offset,
/* Write bit 2 = 1, and clear bit 4 to 769_17 */
ret_val = e1000e_write_phy_reg_mdic(hw, BM_WUC_ENABLE_REG,
- phy_reg | BM_WUC_ENABLE_BIT);
+ phy_reg | BM_WUC_ENABLE_BIT);
if (ret_val) {
e_dbg("Could not write PHY page 769 bit 2\n");
goto out;
@@ -2654,7 +2654,7 @@ static s32 e1000_access_phy_wakeup_reg_bm(struct e1000_hw *hw, u32 offset,
/* Select page 800 */
ret_val = e1000e_write_phy_reg_mdic(hw, IGP01E1000_PHY_PAGE_SELECT,
- (BM_WUC_PAGE << IGP_PAGE_SHIFT));
+ (BM_WUC_PAGE << IGP_PAGE_SHIFT));
/* Write the page 800 offset value using opcode 0x11 */
ret_val = e1000e_write_phy_reg_mdic(hw, BM_WUC_ADDRESS_OPCODE, reg);
@@ -2664,11 +2664,11 @@ static s32 e1000_access_phy_wakeup_reg_bm(struct e1000_hw *hw, u32 offset,
}
if (read) {
- /* Read the page 800 value using opcode 0x12 */
+ /* Read the page 800 value using opcode 0x12 */
ret_val = e1000e_read_phy_reg_mdic(hw, BM_WUC_DATA_OPCODE,
- data);
+ data);
} else {
- /* Write the page 800 value using opcode 0x12 */
+ /* Write the page 800 value using opcode 0x12 */
ret_val = e1000e_write_phy_reg_mdic(hw, BM_WUC_DATA_OPCODE,
*data);
}
@@ -2683,7 +2683,7 @@ static s32 e1000_access_phy_wakeup_reg_bm(struct e1000_hw *hw, u32 offset,
* Set page 769
*/
e1000e_write_phy_reg_mdic(hw, IGP01E1000_PHY_PAGE_SELECT,
- (BM_WUC_ENABLE_PAGE << IGP_PAGE_SHIFT));
+ (BM_WUC_ENABLE_PAGE << IGP_PAGE_SHIFT));
/* Clear 769_17.2 */
ret_val = e1000e_write_phy_reg_mdic(hw, BM_WUC_ENABLE_REG, phy_reg);
@@ -2782,7 +2782,7 @@ static s32 e1000_set_d0_lplu_state(struct e1000_hw *hw, bool active)
* semaphore before exiting.
**/
static s32 __e1000_read_phy_reg_hv(struct e1000_hw *hw, u32 offset, u16 *data,
- bool locked)
+ bool locked)
{
s32 ret_val;
u16 page = BM_PHY_REG_PAGE(offset);
@@ -2797,13 +2797,13 @@ static s32 __e1000_read_phy_reg_hv(struct e1000_hw *hw, u32 offset, u16 *data,
/* Page 800 works differently than the rest so it has its own func */
if (page == BM_WUC_PAGE) {
ret_val = e1000_access_phy_wakeup_reg_bm(hw, offset,
- data, true);
+ data, true);
goto out;
}
if (page > 0 && page < HV_INTC_FC_PAGE_START) {
ret_val = e1000_access_phy_debug_regs_hv(hw, offset,
- data, true);
+ data, true);
goto out;
}
@@ -2828,7 +2828,7 @@ static s32 __e1000_read_phy_reg_hv(struct e1000_hw *hw, u32 offset, u16 *data,
}
ret_val = e1000e_read_phy_reg_mdic(hw, MAX_PHY_REG_ADDRESS & reg,
- data);
+ data);
out:
if (!locked)
hw->phy.ops.release(hw);
@@ -2876,7 +2876,7 @@ s32 e1000_read_phy_reg_hv_locked(struct e1000_hw *hw, u32 offset, u16 *data)
* at the offset. Release any acquired semaphores before exiting.
**/
static s32 __e1000_write_phy_reg_hv(struct e1000_hw *hw, u32 offset, u16 data,
- bool locked)
+ bool locked)
{
s32 ret_val;
u16 page = BM_PHY_REG_PAGE(offset);
@@ -2891,13 +2891,13 @@ static s32 __e1000_write_phy_reg_hv(struct e1000_hw *hw, u32 offset, u16 data,
/* Page 800 works differently than the rest so it has its own func */
if (page == BM_WUC_PAGE) {
ret_val = e1000_access_phy_wakeup_reg_bm(hw, offset,
- &data, false);
+ &data, false);
goto out;
}
if (page > 0 && page < HV_INTC_FC_PAGE_START) {
ret_val = e1000_access_phy_debug_regs_hv(hw, offset,
- &data, false);
+ &data, false);
goto out;
}
@@ -2917,7 +2917,7 @@ static s32 __e1000_write_phy_reg_hv(struct e1000_hw *hw, u32 offset, u16 data,
(data & (1 << 11))) {
u16 data2 = 0x7EFF;
ret_val = e1000_access_phy_debug_regs_hv(hw, (1 << 6) | 0x3,
- &data2, false);
+ &data2, false);
if (ret_val)
goto out;
}
@@ -2938,7 +2938,7 @@ static s32 __e1000_write_phy_reg_hv(struct e1000_hw *hw, u32 offset, u16 data,
}
ret_val = e1000e_write_phy_reg_mdic(hw, MAX_PHY_REG_ADDRESS & reg,
- data);
+ data);
out:
if (!locked)
@@ -3001,7 +3001,7 @@ static u32 e1000_get_phy_addr_for_hv_page(u32 page)
* to read these regs uses the address port and data port to read/write.
**/
static s32 e1000_access_phy_debug_regs_hv(struct e1000_hw *hw, u32 offset,
- u16 *data, bool read)
+ u16 *data, bool read)
{
s32 ret_val;
u32 addr_reg = 0;
@@ -3009,7 +3009,7 @@ static s32 e1000_access_phy_debug_regs_hv(struct e1000_hw *hw, u32 offset,
/* This takes care of the difference with desktop vs mobile phy */
addr_reg = (hw->phy.type == e1000_phy_82578) ?
- I82578_ADDR_REG : I82577_ADDR_REG;
+ I82578_ADDR_REG : I82577_ADDR_REG;
data_reg = addr_reg + 1;
/* All operations in this function are phy address 2 */
@@ -3067,25 +3067,25 @@ s32 e1000_link_stall_workaround_hv(struct e1000_hw *hw)
goto out;
data &= BM_CS_STATUS_LINK_UP |
- BM_CS_STATUS_RESOLVED |
- BM_CS_STATUS_SPEED_MASK;
+ BM_CS_STATUS_RESOLVED |
+ BM_CS_STATUS_SPEED_MASK;
if (data != (BM_CS_STATUS_LINK_UP |
- BM_CS_STATUS_RESOLVED |
- BM_CS_STATUS_SPEED_1000))
+ BM_CS_STATUS_RESOLVED |
+ BM_CS_STATUS_SPEED_1000))
goto out;
mdelay(200);
/* flush the packets in the fifo buffer */
ret_val = hw->phy.ops.write_reg(hw, HV_MUX_DATA_CTRL,
- HV_MUX_DATA_CTRL_GEN_TO_MAC |
- HV_MUX_DATA_CTRL_FORCE_SPEED);
+ HV_MUX_DATA_CTRL_GEN_TO_MAC |
+ HV_MUX_DATA_CTRL_FORCE_SPEED);
if (ret_val)
goto out;
ret_val = hw->phy.ops.write_reg(hw, HV_MUX_DATA_CTRL,
- HV_MUX_DATA_CTRL_GEN_TO_MAC);
+ HV_MUX_DATA_CTRL_GEN_TO_MAC);
out:
return ret_val;
@@ -3109,8 +3109,8 @@ s32 e1000_check_polarity_82577(struct e1000_hw *hw)
if (!ret_val)
phy->cable_polarity = (data & I82577_PHY_STATUS2_REV_POLARITY)
- ? e1000_rev_polarity_reversed
- : e1000_rev_polarity_normal;
+ ? e1000_rev_polarity_reversed
+ : e1000_rev_polarity_normal;
return ret_val;
}
@@ -3144,9 +3144,9 @@ s32 e1000_phy_force_speed_duplex_82577(struct e1000_hw *hw)
e_dbg("Waiting for forced speed/duplex link on 82577 phy\n");
ret_val = e1000e_phy_has_link_generic(hw,
- PHY_FORCE_LIMIT,
- 100000,
- &link);
+ PHY_FORCE_LIMIT,
+ 100000,
+ &link);
if (ret_val)
goto out;
@@ -3155,9 +3155,9 @@ s32 e1000_phy_force_speed_duplex_82577(struct e1000_hw *hw)
/* Try once more */
ret_val = e1000e_phy_has_link_generic(hw,
- PHY_FORCE_LIMIT,
- 100000,
- &link);
+ PHY_FORCE_LIMIT,
+ 100000,
+ &link);
if (ret_val)
goto out;
}
@@ -3215,12 +3215,12 @@ s32 e1000_get_phy_info_82577(struct e1000_hw *hw)
goto out;
phy->local_rx = (data & SR_1000T_LOCAL_RX_STATUS)
- ? e1000_1000t_rx_status_ok
- : e1000_1000t_rx_status_not_ok;
+ ? e1000_1000t_rx_status_ok
+ : e1000_1000t_rx_status_not_ok;
phy->remote_rx = (data & SR_1000T_REMOTE_RX_STATUS)
- ? e1000_1000t_rx_status_ok
- : e1000_1000t_rx_status_not_ok;
+ ? e1000_1000t_rx_status_ok
+ : e1000_1000t_rx_status_not_ok;
} else {
phy->cable_length = E1000_CABLE_LENGTH_UNDEFINED;
phy->local_rx = e1000_1000t_rx_status_undefined;
@@ -3249,7 +3249,7 @@ s32 e1000_get_cable_length_82577(struct e1000_hw *hw)
goto out;
length = (phy_data & I82577_DSTATUS_CABLE_LENGTH) >>
- I82577_DSTATUS_CABLE_LENGTH_SHIFT;
+ I82577_DSTATUS_CABLE_LENGTH_SHIFT;
if (length == E1000_CABLE_LENGTH_UNDEFINED)
ret_val = -E1000_ERR_PHY;
--
1.7.2.3
^ permalink raw reply related [flat|nested] 27+ messages in thread* [PATCH 2/7] e1000e: cleanup: fix bracket issues
2010-12-09 2:40 [PATCH 0/7] e1000e: cleanup Asbjoern Sloth Toennesen
` (2 preceding siblings ...)
2010-12-09 2:40 ` Asbjoern Sloth Toennesen
@ 2010-12-09 2:40 ` Asbjoern Sloth Toennesen
2010-12-09 2:40 ` Asbjoern Sloth Toennesen
` (18 subsequent siblings)
22 siblings, 0 replies; 27+ messages in thread
From: Asbjoern Sloth Toennesen @ 2010-12-09 2:40 UTC (permalink / raw)
To: Jeff Kirsher, Jeff Kirsher; +Cc: e1000-devel, netdev, linux-kernel
This patch fixes bracket-related issues reported by checkpatch, such as
unnecessary brackets around statements, brackets placed incorrectly,
and missing brackets.
Fixes 7 errors and 10 warnings reported by checkpatch.
Signed-off-by: Asbjoern Sloth Toennesen <asbjorn@asbjorn.biz>
---
drivers/net/e1000e/es2lan.c | 8 ++++----
drivers/net/e1000e/ethtool.c | 4 ++--
drivers/net/e1000e/hw.h | 2 +-
drivers/net/e1000e/ich8lan.c | 5 ++---
drivers/net/e1000e/lib.c | 6 ++----
drivers/net/e1000e/netdev.c | 21 ++++++++-------------
drivers/net/e1000e/phy.c | 28 +++++++++++++---------------
7 files changed, 32 insertions(+), 42 deletions(-)
diff --git a/drivers/net/e1000e/es2lan.c b/drivers/net/e1000e/es2lan.c
index afed60f..6069e9f 100644
--- a/drivers/net/e1000e/es2lan.c
+++ b/drivers/net/e1000e/es2lan.c
@@ -100,8 +100,8 @@
* with a lower bound at "index" and the upper bound at
* "index + 5".
*/
-static const u16 e1000_gg82563_cable_length_table[] =
- { 0, 60, 115, 150, 150, 60, 115, 150, 180, 180, 0xFF };
+static const u16 e1000_gg82563_cable_length_table[] = {
+ 0, 60, 115, 150, 150, 60, 115, 150, 180, 180, 0xFF };
#define GG82563_CABLE_LENGTH_TABLE_SIZE \
ARRAY_SIZE(e1000_gg82563_cable_length_table)
@@ -426,8 +426,8 @@ static void e1000_release_swfw_sync_80003es2lan(struct e1000_hw *hw, u16 mask)
{
u32 swfw_sync;
- while (e1000e_get_hw_semaphore(hw) != 0);
- /* Empty */
+ while (e1000e_get_hw_semaphore(hw) != 0)
+ ; /* Empty */
swfw_sync = er32(SW_FW_SYNC);
swfw_sync &= ~mask;
diff --git a/drivers/net/e1000e/ethtool.c b/drivers/net/e1000e/ethtool.c
index 8acfbca..8ff3a8a 100644
--- a/drivers/net/e1000e/ethtool.c
+++ b/drivers/net/e1000e/ethtool.c
@@ -763,8 +763,8 @@ static bool reg_pattern_test(struct e1000_adapter *adapter, u64 *data,
int reg, int offset, u32 mask, u32 write)
{
u32 pat, val;
- static const u32 test[] =
- {0x5A5A5A5A, 0xA5A5A5A5, 0x00000000, 0xFFFFFFFF};
+ static const u32 test[] = {
+ 0x5A5A5A5A, 0xA5A5A5A5, 0x00000000, 0xFFFFFFFF};
for (pat = 0; pat < ARRAY_SIZE(test); pat++) {
E1000_WRITE_REG_ARRAY(&adapter->hw, reg, offset,
(test[pat] & write));
diff --git a/drivers/net/e1000e/hw.h b/drivers/net/e1000e/hw.h
index 0a319e1..f009dd5 100644
--- a/drivers/net/e1000e/hw.h
+++ b/drivers/net/e1000e/hw.h
@@ -469,7 +469,7 @@ enum e1000_1000t_rx_status {
e1000_1000t_rx_status_undefined = 0xFF
};
-enum e1000_rev_polarity{
+enum e1000_rev_polarity {
e1000_rev_polarity_normal = 0,
e1000_rev_polarity_reversed,
e1000_rev_polarity_undefined = 0xFF
diff --git a/drivers/net/e1000e/ich8lan.c b/drivers/net/e1000e/ich8lan.c
index 53edfd4..c5a7726 100644
--- a/drivers/net/e1000e/ich8lan.c
+++ b/drivers/net/e1000e/ich8lan.c
@@ -2303,11 +2303,10 @@ static s32 e1000_read_flash_data_ich8lan(struct e1000_hw *hw, u32 offset,
*/
if (ret_val == 0) {
flash_data = er32flash(ICH_FLASH_FDATA0);
- if (size == 1) {
+ if (size == 1)
*data = (u8)(flash_data & 0x000000FF);
- } else if (size == 2) {
+ else if (size == 2)
*data = (u16)(flash_data & 0x0000FFFF);
- }
break;
} else {
/*
diff --git a/drivers/net/e1000e/lib.c b/drivers/net/e1000e/lib.c
index 20870b2..513b4d1 100644
--- a/drivers/net/e1000e/lib.c
+++ b/drivers/net/e1000e/lib.c
@@ -493,9 +493,8 @@ s32 e1000e_check_for_copper_link(struct e1000_hw *hw)
* different link partner.
*/
ret_val = e1000e_config_fc_after_link_up(hw);
- if (ret_val) {
+ if (ret_val)
e_dbg("Error configuring flow control\n");
- }
return ret_val;
}
@@ -1496,9 +1495,8 @@ s32 e1000e_setup_led_generic(struct e1000_hw *hw)
{
u32 ledctl;
- if (hw->mac.ops.setup_led != e1000e_setup_led_generic) {
+ if (hw->mac.ops.setup_led != e1000e_setup_led_generic)
return -E1000_ERR_CONFIG;
- }
if (hw->phy.media_type == e1000_media_type_fiber) {
ledctl = er32(LEDCTL);
diff --git a/drivers/net/e1000e/netdev.c b/drivers/net/e1000e/netdev.c
index 820ea48..d71854f 100644
--- a/drivers/net/e1000e/netdev.c
+++ b/drivers/net/e1000e/netdev.c
@@ -1325,7 +1325,7 @@ static bool e1000_clean_jumbo_rx_irq(struct e1000_adapter *adapter,
goto next_desc;
}
-#define rxtop rx_ring->rx_skb_top
+#define rxtop (rx_ring->rx_skb_top)
if (!(status & E1000_RXD_STAT_EOP)) {
/* this descriptor is only the beginning (or middle) */
if (!rxtop) {
@@ -1806,9 +1806,8 @@ void e1000e_set_interrupt_capability(struct e1000_adapter *adapter)
err = pci_enable_msix(adapter->pdev,
adapter->msix_entries,
adapter->num_vectors);
- if (err == 0) {
+ if (err == 0)
return;
- }
}
/* MSI-X failed, so fall through and try MSI */
e_err("Failed to initialize MSI-X interrupts. "
@@ -2198,9 +2197,8 @@ void e1000e_free_rx_resources(struct e1000_adapter *adapter)
e1000_clean_rx_ring(adapter);
- for (i = 0; i < rx_ring->count; i++) {
+ for (i = 0; i < rx_ring->count; i++)
kfree(rx_ring->buffer_info[i].ps_pages);
- }
vfree(rx_ring->buffer_info);
rx_ring->buffer_info = NULL;
@@ -2240,20 +2238,18 @@ static unsigned int e1000_update_itr(struct e1000_adapter *adapter,
/* handle TSO and jumbo frames */
if (bytes/packets > 8000)
retval = bulk_latency;
- else if ((packets < 5) && (bytes > 512)) {
+ else if ((packets < 5) && (bytes > 512))
retval = low_latency;
- }
break;
case low_latency: /* 50 usec aka 20000 ints/s */
if (bytes > 10000) {
/* this if handles the TSO accounting */
- if (bytes/packets > 8000) {
+ if (bytes/packets > 8000)
retval = bulk_latency;
- } else if ((packets < 10) || ((bytes/packets) > 1200)) {
+ else if ((packets < 10) || ((bytes/packets) > 1200))
retval = bulk_latency;
- } else if ((packets > 35)) {
+ else if ((packets > 35))
retval = lowest_latency;
- }
} else if (bytes/packets > 2000) {
retval = bulk_latency;
} else if (packets <= 2 && bytes < 512) {
@@ -2262,9 +2258,8 @@ static unsigned int e1000_update_itr(struct e1000_adapter *adapter,
break;
case bulk_latency: /* 250 usec aka 4000 ints/s */
if (bytes > 25000) {
- if (packets > 35) {
+ if (packets > 35)
retval = low_latency;
- }
} else if (bytes < 6000) {
retval = low_latency;
}
diff --git a/drivers/net/e1000e/phy.c b/drivers/net/e1000e/phy.c
index a26c296..23b1e48 100644
--- a/drivers/net/e1000e/phy.c
+++ b/drivers/net/e1000e/phy.c
@@ -42,20 +42,20 @@ static s32 e1000_access_phy_debug_regs_hv(struct e1000_hw *hw, u32 offset,
u16 *data, bool read);
/* Cable length tables */
-static const u16 e1000_m88_cable_length_table[] =
- { 0, 50, 80, 110, 140, 140, E1000_CABLE_LENGTH_UNDEFINED };
+static const u16 e1000_m88_cable_length_table[] = {
+ 0, 50, 80, 110, 140, 140, E1000_CABLE_LENGTH_UNDEFINED };
#define M88E1000_CABLE_LENGTH_TABLE_SIZE \
ARRAY_SIZE(e1000_m88_cable_length_table)
-static const u16 e1000_igp_2_cable_length_table[] =
- { 0, 0, 0, 0, 0, 0, 0, 0, 3, 5, 8, 11, 13, 16, 18, 21, 0, 0, 0, 3,
- 6, 10, 13, 16, 19, 23, 26, 29, 32, 35, 38, 41, 6, 10, 14, 18, 22,
- 26, 30, 33, 37, 41, 44, 48, 51, 54, 58, 61, 21, 26, 31, 35, 40,
- 44, 49, 53, 57, 61, 65, 68, 72, 75, 79, 82, 40, 45, 51, 56, 61,
- 66, 70, 75, 79, 83, 87, 91, 94, 98, 101, 104, 60, 66, 72, 77, 82,
- 87, 92, 96, 100, 104, 108, 111, 114, 117, 119, 121, 83, 89, 95,
- 100, 105, 109, 113, 116, 119, 122, 124, 104, 109, 114, 118, 121,
- 124};
+static const u16 e1000_igp_2_cable_length_table[] = {
+ 0, 0, 0, 0, 0, 0, 0, 0, 3, 5, 8, 11, 13, 16, 18, 21, 0, 0, 0, 3,
+ 6, 10, 13, 16, 19, 23, 26, 29, 32, 35, 38, 41, 6, 10, 14, 18, 22,
+ 26, 30, 33, 37, 41, 44, 48, 51, 54, 58, 61, 21, 26, 31, 35, 40,
+ 44, 49, 53, 57, 61, 65, 68, 72, 75, 79, 82, 40, 45, 51, 56, 61,
+ 66, 70, 75, 79, 83, 87, 91, 94, 98, 101, 104, 60, 66, 72, 77, 82,
+ 87, 92, 96, 100, 104, 108, 111, 114, 117, 119, 121, 83, 89, 95,
+ 100, 105, 109, 113, 116, 119, 122, 124, 104, 109, 114, 118, 121,
+ 124 };
#define IGP02E1000_CABLE_LENGTH_TABLE_SIZE \
ARRAY_SIZE(e1000_igp_2_cable_length_table)
@@ -1043,9 +1043,8 @@ static s32 e1000_phy_setup_autoneg(struct e1000_hw *hw)
e_dbg("Auto-Neg Advertising %x\n", mii_autoneg_adv_reg);
- if (phy->autoneg_mask & ADVERTISE_1000_FULL) {
+ if (phy->autoneg_mask & ADVERTISE_1000_FULL)
ret_val = e1e_wphy(hw, PHY_1000T_CTRL, mii_1000t_ctrl_reg);
- }
return ret_val;
}
@@ -1840,8 +1839,7 @@ s32 e1000e_get_cable_length_igp_2(struct e1000_hw *hw)
u16 phy_data, i, agc_value = 0;
u16 cur_agc_index, max_agc_index = 0;
u16 min_agc_index = IGP02E1000_CABLE_LENGTH_TABLE_SIZE - 1;
- u16 agc_reg_array[IGP02E1000_PHY_CHANNEL_NUM] =
- {IGP02E1000_PHY_AGC_A,
+ u16 agc_reg_array[IGP02E1000_PHY_CHANNEL_NUM] = { IGP02E1000_PHY_AGC_A,
IGP02E1000_PHY_AGC_B,
IGP02E1000_PHY_AGC_C,
IGP02E1000_PHY_AGC_D};
--
1.7.2.3
------------------------------------------------------------------------------
This SF Dev2Dev email is sponsored by:
WikiLeaks The End of the Free Internet
http://p.sf.net/sfu/therealnews-com
_______________________________________________
E1000-devel mailing list
E1000-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/e1000-devel
To learn more about Intel® Ethernet, visit http://communities.intel.com/community/wired
^ permalink raw reply related [flat|nested] 27+ messages in thread* [PATCH 2/7] e1000e: cleanup: fix bracket issues
2010-12-09 2:40 [PATCH 0/7] e1000e: cleanup Asbjoern Sloth Toennesen
` (3 preceding siblings ...)
2010-12-09 2:40 ` [PATCH 2/7] e1000e: cleanup: fix bracket issues Asbjoern Sloth Toennesen
@ 2010-12-09 2:40 ` Asbjoern Sloth Toennesen
2010-12-09 2:40 ` Asbjoern Sloth Toennesen
` (17 subsequent siblings)
22 siblings, 0 replies; 27+ messages in thread
From: Asbjoern Sloth Toennesen @ 2010-12-09 2:40 UTC (permalink / raw)
To: Jeff Kirsher, Jeff Kirsher; +Cc: e1000-devel, netdev, linux-kernel
This patch fixes bracket-related issues reported by checkpatch, such as
unnecessary brackets around statements, brackets placed incorrectly,
and missing brackets.
Fixes 7 errors and 10 warnings reported by checkpatch.
Signed-off-by: Asbjoern Sloth Toennesen <asbjorn@asbjorn.biz>
---
drivers/net/e1000e/es2lan.c | 8 ++++----
drivers/net/e1000e/ethtool.c | 4 ++--
drivers/net/e1000e/hw.h | 2 +-
drivers/net/e1000e/ich8lan.c | 5 ++---
drivers/net/e1000e/lib.c | 6 ++----
drivers/net/e1000e/netdev.c | 21 ++++++++-------------
drivers/net/e1000e/phy.c | 28 +++++++++++++---------------
7 files changed, 32 insertions(+), 42 deletions(-)
diff --git a/drivers/net/e1000e/es2lan.c b/drivers/net/e1000e/es2lan.c
index afed60f..6069e9f 100644
--- a/drivers/net/e1000e/es2lan.c
+++ b/drivers/net/e1000e/es2lan.c
@@ -100,8 +100,8 @@
* with a lower bound at "index" and the upper bound at
* "index + 5".
*/
-static const u16 e1000_gg82563_cable_length_table[] =
- { 0, 60, 115, 150, 150, 60, 115, 150, 180, 180, 0xFF };
+static const u16 e1000_gg82563_cable_length_table[] = {
+ 0, 60, 115, 150, 150, 60, 115, 150, 180, 180, 0xFF };
#define GG82563_CABLE_LENGTH_TABLE_SIZE \
ARRAY_SIZE(e1000_gg82563_cable_length_table)
@@ -426,8 +426,8 @@ static void e1000_release_swfw_sync_80003es2lan(struct e1000_hw *hw, u16 mask)
{
u32 swfw_sync;
- while (e1000e_get_hw_semaphore(hw) != 0);
- /* Empty */
+ while (e1000e_get_hw_semaphore(hw) != 0)
+ ; /* Empty */
swfw_sync = er32(SW_FW_SYNC);
swfw_sync &= ~mask;
diff --git a/drivers/net/e1000e/ethtool.c b/drivers/net/e1000e/ethtool.c
index 8acfbca..8ff3a8a 100644
--- a/drivers/net/e1000e/ethtool.c
+++ b/drivers/net/e1000e/ethtool.c
@@ -763,8 +763,8 @@ static bool reg_pattern_test(struct e1000_adapter *adapter, u64 *data,
int reg, int offset, u32 mask, u32 write)
{
u32 pat, val;
- static const u32 test[] =
- {0x5A5A5A5A, 0xA5A5A5A5, 0x00000000, 0xFFFFFFFF};
+ static const u32 test[] = {
+ 0x5A5A5A5A, 0xA5A5A5A5, 0x00000000, 0xFFFFFFFF};
for (pat = 0; pat < ARRAY_SIZE(test); pat++) {
E1000_WRITE_REG_ARRAY(&adapter->hw, reg, offset,
(test[pat] & write));
diff --git a/drivers/net/e1000e/hw.h b/drivers/net/e1000e/hw.h
index 0a319e1..f009dd5 100644
--- a/drivers/net/e1000e/hw.h
+++ b/drivers/net/e1000e/hw.h
@@ -469,7 +469,7 @@ enum e1000_1000t_rx_status {
e1000_1000t_rx_status_undefined = 0xFF
};
-enum e1000_rev_polarity{
+enum e1000_rev_polarity {
e1000_rev_polarity_normal = 0,
e1000_rev_polarity_reversed,
e1000_rev_polarity_undefined = 0xFF
diff --git a/drivers/net/e1000e/ich8lan.c b/drivers/net/e1000e/ich8lan.c
index 53edfd4..c5a7726 100644
--- a/drivers/net/e1000e/ich8lan.c
+++ b/drivers/net/e1000e/ich8lan.c
@@ -2303,11 +2303,10 @@ static s32 e1000_read_flash_data_ich8lan(struct e1000_hw *hw, u32 offset,
*/
if (ret_val == 0) {
flash_data = er32flash(ICH_FLASH_FDATA0);
- if (size == 1) {
+ if (size == 1)
*data = (u8)(flash_data & 0x000000FF);
- } else if (size == 2) {
+ else if (size == 2)
*data = (u16)(flash_data & 0x0000FFFF);
- }
break;
} else {
/*
diff --git a/drivers/net/e1000e/lib.c b/drivers/net/e1000e/lib.c
index 20870b2..513b4d1 100644
--- a/drivers/net/e1000e/lib.c
+++ b/drivers/net/e1000e/lib.c
@@ -493,9 +493,8 @@ s32 e1000e_check_for_copper_link(struct e1000_hw *hw)
* different link partner.
*/
ret_val = e1000e_config_fc_after_link_up(hw);
- if (ret_val) {
+ if (ret_val)
e_dbg("Error configuring flow control\n");
- }
return ret_val;
}
@@ -1496,9 +1495,8 @@ s32 e1000e_setup_led_generic(struct e1000_hw *hw)
{
u32 ledctl;
- if (hw->mac.ops.setup_led != e1000e_setup_led_generic) {
+ if (hw->mac.ops.setup_led != e1000e_setup_led_generic)
return -E1000_ERR_CONFIG;
- }
if (hw->phy.media_type == e1000_media_type_fiber) {
ledctl = er32(LEDCTL);
diff --git a/drivers/net/e1000e/netdev.c b/drivers/net/e1000e/netdev.c
index 820ea48..d71854f 100644
--- a/drivers/net/e1000e/netdev.c
+++ b/drivers/net/e1000e/netdev.c
@@ -1325,7 +1325,7 @@ static bool e1000_clean_jumbo_rx_irq(struct e1000_adapter *adapter,
goto next_desc;
}
-#define rxtop rx_ring->rx_skb_top
+#define rxtop (rx_ring->rx_skb_top)
if (!(status & E1000_RXD_STAT_EOP)) {
/* this descriptor is only the beginning (or middle) */
if (!rxtop) {
@@ -1806,9 +1806,8 @@ void e1000e_set_interrupt_capability(struct e1000_adapter *adapter)
err = pci_enable_msix(adapter->pdev,
adapter->msix_entries,
adapter->num_vectors);
- if (err == 0) {
+ if (err == 0)
return;
- }
}
/* MSI-X failed, so fall through and try MSI */
e_err("Failed to initialize MSI-X interrupts. "
@@ -2198,9 +2197,8 @@ void e1000e_free_rx_resources(struct e1000_adapter *adapter)
e1000_clean_rx_ring(adapter);
- for (i = 0; i < rx_ring->count; i++) {
+ for (i = 0; i < rx_ring->count; i++)
kfree(rx_ring->buffer_info[i].ps_pages);
- }
vfree(rx_ring->buffer_info);
rx_ring->buffer_info = NULL;
@@ -2240,20 +2238,18 @@ static unsigned int e1000_update_itr(struct e1000_adapter *adapter,
/* handle TSO and jumbo frames */
if (bytes/packets > 8000)
retval = bulk_latency;
- else if ((packets < 5) && (bytes > 512)) {
+ else if ((packets < 5) && (bytes > 512))
retval = low_latency;
- }
break;
case low_latency: /* 50 usec aka 20000 ints/s */
if (bytes > 10000) {
/* this if handles the TSO accounting */
- if (bytes/packets > 8000) {
+ if (bytes/packets > 8000)
retval = bulk_latency;
- } else if ((packets < 10) || ((bytes/packets) > 1200)) {
+ else if ((packets < 10) || ((bytes/packets) > 1200))
retval = bulk_latency;
- } else if ((packets > 35)) {
+ else if ((packets > 35))
retval = lowest_latency;
- }
} else if (bytes/packets > 2000) {
retval = bulk_latency;
} else if (packets <= 2 && bytes < 512) {
@@ -2262,9 +2258,8 @@ static unsigned int e1000_update_itr(struct e1000_adapter *adapter,
break;
case bulk_latency: /* 250 usec aka 4000 ints/s */
if (bytes > 25000) {
- if (packets > 35) {
+ if (packets > 35)
retval = low_latency;
- }
} else if (bytes < 6000) {
retval = low_latency;
}
diff --git a/drivers/net/e1000e/phy.c b/drivers/net/e1000e/phy.c
index a26c296..23b1e48 100644
--- a/drivers/net/e1000e/phy.c
+++ b/drivers/net/e1000e/phy.c
@@ -42,20 +42,20 @@ static s32 e1000_access_phy_debug_regs_hv(struct e1000_hw *hw, u32 offset,
u16 *data, bool read);
/* Cable length tables */
-static const u16 e1000_m88_cable_length_table[] =
- { 0, 50, 80, 110, 140, 140, E1000_CABLE_LENGTH_UNDEFINED };
+static const u16 e1000_m88_cable_length_table[] = {
+ 0, 50, 80, 110, 140, 140, E1000_CABLE_LENGTH_UNDEFINED };
#define M88E1000_CABLE_LENGTH_TABLE_SIZE \
ARRAY_SIZE(e1000_m88_cable_length_table)
-static const u16 e1000_igp_2_cable_length_table[] =
- { 0, 0, 0, 0, 0, 0, 0, 0, 3, 5, 8, 11, 13, 16, 18, 21, 0, 0, 0, 3,
- 6, 10, 13, 16, 19, 23, 26, 29, 32, 35, 38, 41, 6, 10, 14, 18, 22,
- 26, 30, 33, 37, 41, 44, 48, 51, 54, 58, 61, 21, 26, 31, 35, 40,
- 44, 49, 53, 57, 61, 65, 68, 72, 75, 79, 82, 40, 45, 51, 56, 61,
- 66, 70, 75, 79, 83, 87, 91, 94, 98, 101, 104, 60, 66, 72, 77, 82,
- 87, 92, 96, 100, 104, 108, 111, 114, 117, 119, 121, 83, 89, 95,
- 100, 105, 109, 113, 116, 119, 122, 124, 104, 109, 114, 118, 121,
- 124};
+static const u16 e1000_igp_2_cable_length_table[] = {
+ 0, 0, 0, 0, 0, 0, 0, 0, 3, 5, 8, 11, 13, 16, 18, 21, 0, 0, 0, 3,
+ 6, 10, 13, 16, 19, 23, 26, 29, 32, 35, 38, 41, 6, 10, 14, 18, 22,
+ 26, 30, 33, 37, 41, 44, 48, 51, 54, 58, 61, 21, 26, 31, 35, 40,
+ 44, 49, 53, 57, 61, 65, 68, 72, 75, 79, 82, 40, 45, 51, 56, 61,
+ 66, 70, 75, 79, 83, 87, 91, 94, 98, 101, 104, 60, 66, 72, 77, 82,
+ 87, 92, 96, 100, 104, 108, 111, 114, 117, 119, 121, 83, 89, 95,
+ 100, 105, 109, 113, 116, 119, 122, 124, 104, 109, 114, 118, 121,
+ 124 };
#define IGP02E1000_CABLE_LENGTH_TABLE_SIZE \
ARRAY_SIZE(e1000_igp_2_cable_length_table)
@@ -1043,9 +1043,8 @@ static s32 e1000_phy_setup_autoneg(struct e1000_hw *hw)
e_dbg("Auto-Neg Advertising %x\n", mii_autoneg_adv_reg);
- if (phy->autoneg_mask & ADVERTISE_1000_FULL) {
+ if (phy->autoneg_mask & ADVERTISE_1000_FULL)
ret_val = e1e_wphy(hw, PHY_1000T_CTRL, mii_1000t_ctrl_reg);
- }
return ret_val;
}
@@ -1840,8 +1839,7 @@ s32 e1000e_get_cable_length_igp_2(struct e1000_hw *hw)
u16 phy_data, i, agc_value = 0;
u16 cur_agc_index, max_agc_index = 0;
u16 min_agc_index = IGP02E1000_CABLE_LENGTH_TABLE_SIZE - 1;
- u16 agc_reg_array[IGP02E1000_PHY_CHANNEL_NUM] =
- {IGP02E1000_PHY_AGC_A,
+ u16 agc_reg_array[IGP02E1000_PHY_CHANNEL_NUM] = { IGP02E1000_PHY_AGC_A,
IGP02E1000_PHY_AGC_B,
IGP02E1000_PHY_AGC_C,
IGP02E1000_PHY_AGC_D};
--
1.7.2.3
^ permalink raw reply related [flat|nested] 27+ messages in thread* [PATCH 2/7] e1000e: cleanup: fix bracket issues
2010-12-09 2:40 [PATCH 0/7] e1000e: cleanup Asbjoern Sloth Toennesen
` (4 preceding siblings ...)
2010-12-09 2:40 ` Asbjoern Sloth Toennesen
@ 2010-12-09 2:40 ` Asbjoern Sloth Toennesen
2010-12-09 2:40 ` [PATCH 3/7] e1000e: cleanup: simplify E1000_ALL_* defines Asbjoern Sloth Toennesen
` (16 subsequent siblings)
22 siblings, 0 replies; 27+ messages in thread
From: Asbjoern Sloth Toennesen @ 2010-12-09 2:40 UTC (permalink / raw)
To: Jeff Kirsher, Jeff Kirsher; +Cc: e1000-devel, netdev, linux-kernel
This patch fixes bracket-related issues reported by checkpatch, such as
unnecessary brackets around statements, brackets placed incorrectly,
and missing brackets.
Fixes 7 errors and 10 warnings reported by checkpatch.
Signed-off-by: Asbjoern Sloth Toennesen <asbjorn@asbjorn.biz>
---
drivers/net/e1000e/es2lan.c | 8 ++++----
drivers/net/e1000e/ethtool.c | 4 ++--
drivers/net/e1000e/hw.h | 2 +-
drivers/net/e1000e/ich8lan.c | 5 ++---
drivers/net/e1000e/lib.c | 6 ++----
drivers/net/e1000e/netdev.c | 21 ++++++++-------------
drivers/net/e1000e/phy.c | 28 +++++++++++++---------------
7 files changed, 32 insertions(+), 42 deletions(-)
diff --git a/drivers/net/e1000e/es2lan.c b/drivers/net/e1000e/es2lan.c
index afed60f..6069e9f 100644
--- a/drivers/net/e1000e/es2lan.c
+++ b/drivers/net/e1000e/es2lan.c
@@ -100,8 +100,8 @@
* with a lower bound at "index" and the upper bound at
* "index + 5".
*/
-static const u16 e1000_gg82563_cable_length_table[] =
- { 0, 60, 115, 150, 150, 60, 115, 150, 180, 180, 0xFF };
+static const u16 e1000_gg82563_cable_length_table[] = {
+ 0, 60, 115, 150, 150, 60, 115, 150, 180, 180, 0xFF };
#define GG82563_CABLE_LENGTH_TABLE_SIZE \
ARRAY_SIZE(e1000_gg82563_cable_length_table)
@@ -426,8 +426,8 @@ static void e1000_release_swfw_sync_80003es2lan(struct e1000_hw *hw, u16 mask)
{
u32 swfw_sync;
- while (e1000e_get_hw_semaphore(hw) != 0);
- /* Empty */
+ while (e1000e_get_hw_semaphore(hw) != 0)
+ ; /* Empty */
swfw_sync = er32(SW_FW_SYNC);
swfw_sync &= ~mask;
diff --git a/drivers/net/e1000e/ethtool.c b/drivers/net/e1000e/ethtool.c
index 8acfbca..8ff3a8a 100644
--- a/drivers/net/e1000e/ethtool.c
+++ b/drivers/net/e1000e/ethtool.c
@@ -763,8 +763,8 @@ static bool reg_pattern_test(struct e1000_adapter *adapter, u64 *data,
int reg, int offset, u32 mask, u32 write)
{
u32 pat, val;
- static const u32 test[] =
- {0x5A5A5A5A, 0xA5A5A5A5, 0x00000000, 0xFFFFFFFF};
+ static const u32 test[] = {
+ 0x5A5A5A5A, 0xA5A5A5A5, 0x00000000, 0xFFFFFFFF};
for (pat = 0; pat < ARRAY_SIZE(test); pat++) {
E1000_WRITE_REG_ARRAY(&adapter->hw, reg, offset,
(test[pat] & write));
diff --git a/drivers/net/e1000e/hw.h b/drivers/net/e1000e/hw.h
index 0a319e1..f009dd5 100644
--- a/drivers/net/e1000e/hw.h
+++ b/drivers/net/e1000e/hw.h
@@ -469,7 +469,7 @@ enum e1000_1000t_rx_status {
e1000_1000t_rx_status_undefined = 0xFF
};
-enum e1000_rev_polarity{
+enum e1000_rev_polarity {
e1000_rev_polarity_normal = 0,
e1000_rev_polarity_reversed,
e1000_rev_polarity_undefined = 0xFF
diff --git a/drivers/net/e1000e/ich8lan.c b/drivers/net/e1000e/ich8lan.c
index 53edfd4..c5a7726 100644
--- a/drivers/net/e1000e/ich8lan.c
+++ b/drivers/net/e1000e/ich8lan.c
@@ -2303,11 +2303,10 @@ static s32 e1000_read_flash_data_ich8lan(struct e1000_hw *hw, u32 offset,
*/
if (ret_val == 0) {
flash_data = er32flash(ICH_FLASH_FDATA0);
- if (size == 1) {
+ if (size == 1)
*data = (u8)(flash_data & 0x000000FF);
- } else if (size == 2) {
+ else if (size == 2)
*data = (u16)(flash_data & 0x0000FFFF);
- }
break;
} else {
/*
diff --git a/drivers/net/e1000e/lib.c b/drivers/net/e1000e/lib.c
index 20870b2..513b4d1 100644
--- a/drivers/net/e1000e/lib.c
+++ b/drivers/net/e1000e/lib.c
@@ -493,9 +493,8 @@ s32 e1000e_check_for_copper_link(struct e1000_hw *hw)
* different link partner.
*/
ret_val = e1000e_config_fc_after_link_up(hw);
- if (ret_val) {
+ if (ret_val)
e_dbg("Error configuring flow control\n");
- }
return ret_val;
}
@@ -1496,9 +1495,8 @@ s32 e1000e_setup_led_generic(struct e1000_hw *hw)
{
u32 ledctl;
- if (hw->mac.ops.setup_led != e1000e_setup_led_generic) {
+ if (hw->mac.ops.setup_led != e1000e_setup_led_generic)
return -E1000_ERR_CONFIG;
- }
if (hw->phy.media_type == e1000_media_type_fiber) {
ledctl = er32(LEDCTL);
diff --git a/drivers/net/e1000e/netdev.c b/drivers/net/e1000e/netdev.c
index 820ea48..d71854f 100644
--- a/drivers/net/e1000e/netdev.c
+++ b/drivers/net/e1000e/netdev.c
@@ -1325,7 +1325,7 @@ static bool e1000_clean_jumbo_rx_irq(struct e1000_adapter *adapter,
goto next_desc;
}
-#define rxtop rx_ring->rx_skb_top
+#define rxtop (rx_ring->rx_skb_top)
if (!(status & E1000_RXD_STAT_EOP)) {
/* this descriptor is only the beginning (or middle) */
if (!rxtop) {
@@ -1806,9 +1806,8 @@ void e1000e_set_interrupt_capability(struct e1000_adapter *adapter)
err = pci_enable_msix(adapter->pdev,
adapter->msix_entries,
adapter->num_vectors);
- if (err == 0) {
+ if (err == 0)
return;
- }
}
/* MSI-X failed, so fall through and try MSI */
e_err("Failed to initialize MSI-X interrupts. "
@@ -2198,9 +2197,8 @@ void e1000e_free_rx_resources(struct e1000_adapter *adapter)
e1000_clean_rx_ring(adapter);
- for (i = 0; i < rx_ring->count; i++) {
+ for (i = 0; i < rx_ring->count; i++)
kfree(rx_ring->buffer_info[i].ps_pages);
- }
vfree(rx_ring->buffer_info);
rx_ring->buffer_info = NULL;
@@ -2240,20 +2238,18 @@ static unsigned int e1000_update_itr(struct e1000_adapter *adapter,
/* handle TSO and jumbo frames */
if (bytes/packets > 8000)
retval = bulk_latency;
- else if ((packets < 5) && (bytes > 512)) {
+ else if ((packets < 5) && (bytes > 512))
retval = low_latency;
- }
break;
case low_latency: /* 50 usec aka 20000 ints/s */
if (bytes > 10000) {
/* this if handles the TSO accounting */
- if (bytes/packets > 8000) {
+ if (bytes/packets > 8000)
retval = bulk_latency;
- } else if ((packets < 10) || ((bytes/packets) > 1200)) {
+ else if ((packets < 10) || ((bytes/packets) > 1200))
retval = bulk_latency;
- } else if ((packets > 35)) {
+ else if ((packets > 35))
retval = lowest_latency;
- }
} else if (bytes/packets > 2000) {
retval = bulk_latency;
} else if (packets <= 2 && bytes < 512) {
@@ -2262,9 +2258,8 @@ static unsigned int e1000_update_itr(struct e1000_adapter *adapter,
break;
case bulk_latency: /* 250 usec aka 4000 ints/s */
if (bytes > 25000) {
- if (packets > 35) {
+ if (packets > 35)
retval = low_latency;
- }
} else if (bytes < 6000) {
retval = low_latency;
}
diff --git a/drivers/net/e1000e/phy.c b/drivers/net/e1000e/phy.c
index a26c296..23b1e48 100644
--- a/drivers/net/e1000e/phy.c
+++ b/drivers/net/e1000e/phy.c
@@ -42,20 +42,20 @@ static s32 e1000_access_phy_debug_regs_hv(struct e1000_hw *hw, u32 offset,
u16 *data, bool read);
/* Cable length tables */
-static const u16 e1000_m88_cable_length_table[] =
- { 0, 50, 80, 110, 140, 140, E1000_CABLE_LENGTH_UNDEFINED };
+static const u16 e1000_m88_cable_length_table[] = {
+ 0, 50, 80, 110, 140, 140, E1000_CABLE_LENGTH_UNDEFINED };
#define M88E1000_CABLE_LENGTH_TABLE_SIZE \
ARRAY_SIZE(e1000_m88_cable_length_table)
-static const u16 e1000_igp_2_cable_length_table[] =
- { 0, 0, 0, 0, 0, 0, 0, 0, 3, 5, 8, 11, 13, 16, 18, 21, 0, 0, 0, 3,
- 6, 10, 13, 16, 19, 23, 26, 29, 32, 35, 38, 41, 6, 10, 14, 18, 22,
- 26, 30, 33, 37, 41, 44, 48, 51, 54, 58, 61, 21, 26, 31, 35, 40,
- 44, 49, 53, 57, 61, 65, 68, 72, 75, 79, 82, 40, 45, 51, 56, 61,
- 66, 70, 75, 79, 83, 87, 91, 94, 98, 101, 104, 60, 66, 72, 77, 82,
- 87, 92, 96, 100, 104, 108, 111, 114, 117, 119, 121, 83, 89, 95,
- 100, 105, 109, 113, 116, 119, 122, 124, 104, 109, 114, 118, 121,
- 124};
+static const u16 e1000_igp_2_cable_length_table[] = {
+ 0, 0, 0, 0, 0, 0, 0, 0, 3, 5, 8, 11, 13, 16, 18, 21, 0, 0, 0, 3,
+ 6, 10, 13, 16, 19, 23, 26, 29, 32, 35, 38, 41, 6, 10, 14, 18, 22,
+ 26, 30, 33, 37, 41, 44, 48, 51, 54, 58, 61, 21, 26, 31, 35, 40,
+ 44, 49, 53, 57, 61, 65, 68, 72, 75, 79, 82, 40, 45, 51, 56, 61,
+ 66, 70, 75, 79, 83, 87, 91, 94, 98, 101, 104, 60, 66, 72, 77, 82,
+ 87, 92, 96, 100, 104, 108, 111, 114, 117, 119, 121, 83, 89, 95,
+ 100, 105, 109, 113, 116, 119, 122, 124, 104, 109, 114, 118, 121,
+ 124 };
#define IGP02E1000_CABLE_LENGTH_TABLE_SIZE \
ARRAY_SIZE(e1000_igp_2_cable_length_table)
@@ -1043,9 +1043,8 @@ static s32 e1000_phy_setup_autoneg(struct e1000_hw *hw)
e_dbg("Auto-Neg Advertising %x\n", mii_autoneg_adv_reg);
- if (phy->autoneg_mask & ADVERTISE_1000_FULL) {
+ if (phy->autoneg_mask & ADVERTISE_1000_FULL)
ret_val = e1e_wphy(hw, PHY_1000T_CTRL, mii_1000t_ctrl_reg);
- }
return ret_val;
}
@@ -1840,8 +1839,7 @@ s32 e1000e_get_cable_length_igp_2(struct e1000_hw *hw)
u16 phy_data, i, agc_value = 0;
u16 cur_agc_index, max_agc_index = 0;
u16 min_agc_index = IGP02E1000_CABLE_LENGTH_TABLE_SIZE - 1;
- u16 agc_reg_array[IGP02E1000_PHY_CHANNEL_NUM] =
- {IGP02E1000_PHY_AGC_A,
+ u16 agc_reg_array[IGP02E1000_PHY_CHANNEL_NUM] = { IGP02E1000_PHY_AGC_A,
IGP02E1000_PHY_AGC_B,
IGP02E1000_PHY_AGC_C,
IGP02E1000_PHY_AGC_D};
--
1.7.2.3
^ permalink raw reply related [flat|nested] 27+ messages in thread* [PATCH 3/7] e1000e: cleanup: simplify E1000_ALL_* defines
2010-12-09 2:40 [PATCH 0/7] e1000e: cleanup Asbjoern Sloth Toennesen
` (5 preceding siblings ...)
2010-12-09 2:40 ` Asbjoern Sloth Toennesen
@ 2010-12-09 2:40 ` Asbjoern Sloth Toennesen
2010-12-09 2:40 ` Asbjoern Sloth Toennesen
` (15 subsequent siblings)
22 siblings, 0 replies; 27+ messages in thread
From: Asbjoern Sloth Toennesen @ 2010-12-09 2:40 UTC (permalink / raw)
To: Jeff Kirsher, Jeff Kirsher; +Cc: e1000-devel, netdev, linux-kernel
Cleanup E1000_ALL_* so that each of them can fit on one line,
by reusing each other instead of solely using combinations of
ADVERTISE_* as defined right above it.
This fixes 2 checkpatch errors.
Signed-off-by: Asbjoern Sloth Toennesen <asbjorn@asbjorn.biz>
---
drivers/net/e1000e/defines.h | 11 ++++-------
1 files changed, 4 insertions(+), 7 deletions(-)
diff --git a/drivers/net/e1000e/defines.h b/drivers/net/e1000e/defines.h
index 2b969c8..10760be 100644
--- a/drivers/net/e1000e/defines.h
+++ b/drivers/net/e1000e/defines.h
@@ -263,14 +263,11 @@
#define ADVERTISE_1000_FULL 0x0020
/* 1000/H is not supported, nor spec-compliant. */
-#define E1000_ALL_SPEED_DUPLEX ( ADVERTISE_10_HALF | ADVERTISE_10_FULL | \
- ADVERTISE_100_HALF | ADVERTISE_100_FULL | \
- ADVERTISE_1000_FULL)
-#define E1000_ALL_NOT_GIG ( ADVERTISE_10_HALF | ADVERTISE_10_FULL | \
- ADVERTISE_100_HALF | ADVERTISE_100_FULL)
+#define E1000_ALL_10_SPEED (ADVERTISE_10_HALF | ADVERTISE_10_FULL)
#define E1000_ALL_100_SPEED (ADVERTISE_100_HALF | ADVERTISE_100_FULL)
-#define E1000_ALL_10_SPEED (ADVERTISE_10_HALF | ADVERTISE_10_FULL)
-#define E1000_ALL_HALF_DUPLEX (ADVERTISE_10_HALF | ADVERTISE_100_HALF)
+#define E1000_ALL_HALF_DUPLEX (ADVERTISE_10_HALF | ADVERTISE_100_HALF)
+#define E1000_ALL_NOT_GIG (E1000_ALL_10_SPEED | E1000_ALL_100_SPEED)
+#define E1000_ALL_SPEED_DUPLEX (E1000_ALL_NOT_GIG | ADVERTISE_1000_FULL)
#define AUTONEG_ADVERTISE_SPEED_DEFAULT E1000_ALL_SPEED_DUPLEX
--
1.7.2.3
^ permalink raw reply related [flat|nested] 27+ messages in thread* [PATCH 3/7] e1000e: cleanup: simplify E1000_ALL_* defines
2010-12-09 2:40 [PATCH 0/7] e1000e: cleanup Asbjoern Sloth Toennesen
` (6 preceding siblings ...)
2010-12-09 2:40 ` [PATCH 3/7] e1000e: cleanup: simplify E1000_ALL_* defines Asbjoern Sloth Toennesen
@ 2010-12-09 2:40 ` Asbjoern Sloth Toennesen
2010-12-09 2:40 ` Asbjoern Sloth Toennesen
` (14 subsequent siblings)
22 siblings, 0 replies; 27+ messages in thread
From: Asbjoern Sloth Toennesen @ 2010-12-09 2:40 UTC (permalink / raw)
To: Jeff Kirsher, Jeff Kirsher; +Cc: e1000-devel, netdev, linux-kernel
Cleanup E1000_ALL_* so that each of them can fit on one line,
by reusing each other instead of solely using combinations of
ADVERTISE_* as defined right above it.
This fixes 2 checkpatch errors.
Signed-off-by: Asbjoern Sloth Toennesen <asbjorn@asbjorn.biz>
---
drivers/net/e1000e/defines.h | 11 ++++-------
1 files changed, 4 insertions(+), 7 deletions(-)
diff --git a/drivers/net/e1000e/defines.h b/drivers/net/e1000e/defines.h
index 2b969c8..10760be 100644
--- a/drivers/net/e1000e/defines.h
+++ b/drivers/net/e1000e/defines.h
@@ -263,14 +263,11 @@
#define ADVERTISE_1000_FULL 0x0020
/* 1000/H is not supported, nor spec-compliant. */
-#define E1000_ALL_SPEED_DUPLEX ( ADVERTISE_10_HALF | ADVERTISE_10_FULL | \
- ADVERTISE_100_HALF | ADVERTISE_100_FULL | \
- ADVERTISE_1000_FULL)
-#define E1000_ALL_NOT_GIG ( ADVERTISE_10_HALF | ADVERTISE_10_FULL | \
- ADVERTISE_100_HALF | ADVERTISE_100_FULL)
+#define E1000_ALL_10_SPEED (ADVERTISE_10_HALF | ADVERTISE_10_FULL)
#define E1000_ALL_100_SPEED (ADVERTISE_100_HALF | ADVERTISE_100_FULL)
-#define E1000_ALL_10_SPEED (ADVERTISE_10_HALF | ADVERTISE_10_FULL)
-#define E1000_ALL_HALF_DUPLEX (ADVERTISE_10_HALF | ADVERTISE_100_HALF)
+#define E1000_ALL_HALF_DUPLEX (ADVERTISE_10_HALF | ADVERTISE_100_HALF)
+#define E1000_ALL_NOT_GIG (E1000_ALL_10_SPEED | E1000_ALL_100_SPEED)
+#define E1000_ALL_SPEED_DUPLEX (E1000_ALL_NOT_GIG | ADVERTISE_1000_FULL)
#define AUTONEG_ADVERTISE_SPEED_DEFAULT E1000_ALL_SPEED_DUPLEX
--
1.7.2.3
^ permalink raw reply related [flat|nested] 27+ messages in thread* [PATCH 3/7] e1000e: cleanup: simplify E1000_ALL_* defines
2010-12-09 2:40 [PATCH 0/7] e1000e: cleanup Asbjoern Sloth Toennesen
` (7 preceding siblings ...)
2010-12-09 2:40 ` Asbjoern Sloth Toennesen
@ 2010-12-09 2:40 ` Asbjoern Sloth Toennesen
2010-12-09 2:40 ` [PATCH 4/7] e1000e: cleanup: fix long lines Asbjoern Sloth Toennesen
` (13 subsequent siblings)
22 siblings, 0 replies; 27+ messages in thread
From: Asbjoern Sloth Toennesen @ 2010-12-09 2:40 UTC (permalink / raw)
To: Jeff Kirsher, Jeff Kirsher; +Cc: e1000-devel, netdev, linux-kernel
Cleanup E1000_ALL_* so that each of them can fit on one line,
by reusing each other instead of solely using combinations of
ADVERTISE_* as defined right above it.
This fixes 2 checkpatch errors.
Signed-off-by: Asbjoern Sloth Toennesen <asbjorn@asbjorn.biz>
---
drivers/net/e1000e/defines.h | 11 ++++-------
1 files changed, 4 insertions(+), 7 deletions(-)
diff --git a/drivers/net/e1000e/defines.h b/drivers/net/e1000e/defines.h
index 2b969c8..10760be 100644
--- a/drivers/net/e1000e/defines.h
+++ b/drivers/net/e1000e/defines.h
@@ -263,14 +263,11 @@
#define ADVERTISE_1000_FULL 0x0020
/* 1000/H is not supported, nor spec-compliant. */
-#define E1000_ALL_SPEED_DUPLEX ( ADVERTISE_10_HALF | ADVERTISE_10_FULL | \
- ADVERTISE_100_HALF | ADVERTISE_100_FULL | \
- ADVERTISE_1000_FULL)
-#define E1000_ALL_NOT_GIG ( ADVERTISE_10_HALF | ADVERTISE_10_FULL | \
- ADVERTISE_100_HALF | ADVERTISE_100_FULL)
+#define E1000_ALL_10_SPEED (ADVERTISE_10_HALF | ADVERTISE_10_FULL)
#define E1000_ALL_100_SPEED (ADVERTISE_100_HALF | ADVERTISE_100_FULL)
-#define E1000_ALL_10_SPEED (ADVERTISE_10_HALF | ADVERTISE_10_FULL)
-#define E1000_ALL_HALF_DUPLEX (ADVERTISE_10_HALF | ADVERTISE_100_HALF)
+#define E1000_ALL_HALF_DUPLEX (ADVERTISE_10_HALF | ADVERTISE_100_HALF)
+#define E1000_ALL_NOT_GIG (E1000_ALL_10_SPEED | E1000_ALL_100_SPEED)
+#define E1000_ALL_SPEED_DUPLEX (E1000_ALL_NOT_GIG | ADVERTISE_1000_FULL)
#define AUTONEG_ADVERTISE_SPEED_DEFAULT E1000_ALL_SPEED_DUPLEX
--
1.7.2.3
------------------------------------------------------------------------------
This SF Dev2Dev email is sponsored by:
WikiLeaks The End of the Free Internet
http://p.sf.net/sfu/therealnews-com
_______________________________________________
E1000-devel mailing list
E1000-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/e1000-devel
To learn more about Intel® Ethernet, visit http://communities.intel.com/community/wired
^ permalink raw reply related [flat|nested] 27+ messages in thread* [PATCH 4/7] e1000e: cleanup: fix long lines
2010-12-09 2:40 [PATCH 0/7] e1000e: cleanup Asbjoern Sloth Toennesen
` (8 preceding siblings ...)
2010-12-09 2:40 ` Asbjoern Sloth Toennesen
@ 2010-12-09 2:40 ` Asbjoern Sloth Toennesen
2010-12-09 2:40 ` Asbjoern Sloth Toennesen
` (12 subsequent siblings)
22 siblings, 0 replies; 27+ messages in thread
From: Asbjoern Sloth Toennesen @ 2010-12-09 2:40 UTC (permalink / raw)
To: Jeff Kirsher, Jeff Kirsher; +Cc: e1000-devel, netdev, linux-kernel
This patch breaks long lines, so they do not exceed 80 characters.
Fixes 2 errors and 26 warnings reported by checkpatch.
Signed-off-by: Asbjoern Sloth Toennesen <asbjorn@asbjorn.biz>
---
drivers/net/e1000e/defines.h | 15 ++++++++++-----
drivers/net/e1000e/e1000.h | 27 ++++++++++++++++++---------
drivers/net/e1000e/es2lan.c | 3 ++-
drivers/net/e1000e/ethtool.c | 3 ++-
drivers/net/e1000e/lib.c | 12 ++++++++----
drivers/net/e1000e/netdev.c | 18 +++++++++++-------
drivers/net/e1000e/param.c | 6 ++++--
7 files changed, 55 insertions(+), 29 deletions(-)
diff --git a/drivers/net/e1000e/defines.h b/drivers/net/e1000e/defines.h
index 10760be..f1260fc 100644
--- a/drivers/net/e1000e/defines.h
+++ b/drivers/net/e1000e/defines.h
@@ -83,8 +83,10 @@
#define E1000_CTRL_EXT_LINK_MODE_PCIE_SERDES 0x00C00000
#define E1000_CTRL_EXT_EIAME 0x01000000
#define E1000_CTRL_EXT_DRV_LOAD 0x10000000 /* Driver loaded bit for FW */
-#define E1000_CTRL_EXT_IAME 0x08000000 /* Interrupt acknowledge Auto-mask */
-#define E1000_CTRL_EXT_INT_TIMER_CLR 0x20000000 /* Clear Interrupt timers after IMS clear */
+#define E1000_CTRL_EXT_IAME 0x08000000 /* Interrupt acknowledge
+ * Auto-mask */
+#define E1000_CTRL_EXT_INT_TIMER_CLR 0x20000000 /* Clear Interrupt timers
+ * after IMS clear */
#define E1000_CTRL_EXT_PBA_CLR 0x80000000 /* PBA Clear */
#define E1000_CTRL_EXT_PHYPDEN 0x00100000
@@ -247,7 +249,8 @@
#define E1000_STATUS_SPEED_1000 0x00000080 /* Speed 1000Mb/s */
#define E1000_STATUS_LAN_INIT_DONE 0x00000200 /* Lan Init Completion by NVM */
#define E1000_STATUS_PHYRA 0x00000400 /* PHY Reset Asserted */
-#define E1000_STATUS_GIO_MASTER_ENABLE 0x00080000 /* Status of Master requests. */
+#define E1000_STATUS_GIO_MASTER_ENABLE 0x00080000 /* Status of Master
+ * requests. */
/* Constants used to interpret the masked PCI-X bus speed. */
@@ -394,7 +397,8 @@
#define E1000_ICR_RXSEQ 0x00000008 /* Rx sequence error */
#define E1000_ICR_RXDMT0 0x00000010 /* Rx desc min. threshold (0) */
#define E1000_ICR_RXT0 0x00000080 /* Rx timer intr (ring 0) */
-#define E1000_ICR_INT_ASSERTED 0x80000000 /* If this bit asserted, the driver should claim the interrupt */
+#define E1000_ICR_INT_ASSERTED 0x80000000 /* If this bit asserted, the driver
+ * should claim the interrupt */
#define E1000_ICR_RXQ0 0x00100000 /* Rx Queue 0 Interrupt */
#define E1000_ICR_RXQ1 0x00200000 /* Rx Queue 1 Interrupt */
#define E1000_ICR_TXQ0 0x00400000 /* Tx Queue 0 Interrupt */
@@ -612,7 +616,8 @@
#define E1000_EECD_SEC1VAL 0x00400000 /* Sector One Valid */
#define E1000_EECD_SEC1VAL_VALID_MASK (E1000_EECD_AUTO_RD | E1000_EECD_PRES)
-#define E1000_NVM_RW_REG_DATA 16 /* Offset to data in NVM read/write registers */
+#define E1000_NVM_RW_REG_DATA 16 /* Offset to data in NVM
+ * read/write registers */
#define E1000_NVM_RW_REG_DONE 2 /* Offset to READ/WRITE done bit */
#define E1000_NVM_RW_REG_START 1 /* Start operation */
#define E1000_NVM_RW_ADDR_SHIFT 2 /* Shift to the address bits */
diff --git a/drivers/net/e1000e/e1000.h b/drivers/net/e1000e/e1000.h
index 47eb0ba..97fa58a 100644
--- a/drivers/net/e1000e/e1000.h
+++ b/drivers/net/e1000e/e1000.h
@@ -542,8 +542,10 @@ extern s32 e1000e_led_off_generic(struct e1000_hw *hw);
extern s32 e1000e_get_bus_info_pcie(struct e1000_hw *hw);
extern void e1000_set_lan_id_multi_port_pcie(struct e1000_hw *hw);
extern void e1000_set_lan_id_single_port(struct e1000_hw *hw);
-extern s32 e1000e_get_speed_and_duplex_copper(struct e1000_hw *hw, u16 *speed, u16 *duplex);
-extern s32 e1000e_get_speed_and_duplex_fiber_serdes(struct e1000_hw *hw, u16 *speed, u16 *duplex);
+extern s32 e1000e_get_speed_and_duplex_copper(struct e1000_hw *hw,
+ u16 *speed, u16 *duplex);
+extern s32 e1000e_get_speed_and_duplex_fiber_serdes(struct e1000_hw *hw,
+ u16 *speed, u16 *duplex);
extern s32 e1000e_disable_pcie_master(struct e1000_hw *hw);
extern s32 e1000e_get_auto_rd_done(struct e1000_hw *hw);
extern s32 e1000e_id_led_init(struct e1000_hw *hw);
@@ -566,7 +568,8 @@ extern void e1000e_config_collision_dist(struct e1000_hw *hw);
extern s32 e1000e_config_fc_after_link_up(struct e1000_hw *hw);
extern s32 e1000e_force_mac_fc(struct e1000_hw *hw);
extern s32 e1000e_blink_led(struct e1000_hw *hw);
-extern void e1000_write_vfta_generic(struct e1000_hw *hw, u32 offset, u32 value);
+extern void e1000_write_vfta_generic(struct e1000_hw *hw, u32 offset,
+ u32 value);
extern s32 e1000_check_alt_mac_addr_generic(struct e1000_hw *hw);
extern void e1000e_reset_adaptive(struct e1000_hw *hw);
extern void e1000e_update_adaptive(struct e1000_hw *hw);
@@ -600,7 +603,8 @@ extern s32 e1000e_write_phy_reg_bm(struct e1000_hw *hw, u32 offset, u16 data);
extern s32 e1000e_read_phy_reg_bm(struct e1000_hw *hw, u32 offset, u16 *data);
extern s32 e1000e_read_phy_reg_bm2(struct e1000_hw *hw, u32 offset, u16 *data);
extern s32 e1000e_write_phy_reg_bm2(struct e1000_hw *hw, u32 offset, u16 data);
-extern void e1000e_phy_force_speed_duplex_setup(struct e1000_hw *hw, u16 *phy_ctrl);
+extern void e1000e_phy_force_speed_duplex_setup(struct e1000_hw *hw,
+ u16 *phy_ctrl);
extern s32 e1000e_write_kmrn_reg(struct e1000_hw *hw, u32 offset, u16 data);
extern s32 e1000e_write_kmrn_reg_locked(struct e1000_hw *hw, u32 offset,
u16 data);
@@ -661,10 +665,12 @@ static inline s32 e1000_get_cable_length(struct e1000_hw *hw)
}
extern s32 e1000e_acquire_nvm(struct e1000_hw *hw);
-extern s32 e1000e_write_nvm_spi(struct e1000_hw *hw, u16 offset, u16 words, u16 *data);
+extern s32 e1000e_write_nvm_spi(struct e1000_hw *hw, u16 offset, u16 words,
+ u16 *data);
extern s32 e1000e_update_nvm_checksum_generic(struct e1000_hw *hw);
extern s32 e1000e_poll_eerd_eewr_done(struct e1000_hw *hw, int ee_reg);
-extern s32 e1000e_read_nvm_eerd(struct e1000_hw *hw, u16 offset, u16 words, u16 *data);
+extern s32 e1000e_read_nvm_eerd(struct e1000_hw *hw, u16 offset, u16 words,
+ u16 *data);
extern s32 e1000e_validate_nvm_checksum_generic(struct e1000_hw *hw);
extern void e1000e_release_nvm(struct e1000_hw *hw);
extern void e1000e_reload_nvm(struct e1000_hw *hw);
@@ -688,12 +694,14 @@ static inline s32 e1000e_update_nvm_checksum(struct e1000_hw *hw)
return hw->nvm.ops.update(hw);
}
-static inline s32 e1000_read_nvm(struct e1000_hw *hw, u16 offset, u16 words, u16 *data)
+static inline s32 e1000_read_nvm(struct e1000_hw *hw, u16 offset, u16 words,
+ u16 *data)
{
return hw->nvm.ops.read(hw, offset, words, data);
}
-static inline s32 e1000_write_nvm(struct e1000_hw *hw, u16 offset, u16 words, u16 *data)
+static inline s32 e1000_write_nvm(struct e1000_hw *hw, u16 offset, u16 words,
+ u16 *data)
{
return hw->nvm.ops.write(hw, offset, words, data);
}
@@ -710,7 +718,8 @@ static inline s32 e1000e_check_mng_mode(struct e1000_hw *hw)
extern bool e1000e_check_mng_mode_generic(struct e1000_hw *hw);
extern bool e1000e_enable_tx_pkt_filtering(struct e1000_hw *hw);
-extern s32 e1000e_mng_write_dhcp_info(struct e1000_hw *hw, u8 *buffer, u16 length);
+extern s32 e1000e_mng_write_dhcp_info(struct e1000_hw *hw, u8 *buffer,
+ u16 length);
static inline u32 __er32(struct e1000_hw *hw, unsigned long reg)
{
diff --git a/drivers/net/e1000e/es2lan.c b/drivers/net/e1000e/es2lan.c
index 6069e9f..56a1321 100644
--- a/drivers/net/e1000e/es2lan.c
+++ b/drivers/net/e1000e/es2lan.c
@@ -233,7 +233,8 @@ static s32 e1000_init_mac_params_80003es2lan(struct e1000_adapter *adapter)
/* check for link */
switch (hw->phy.media_type) {
case e1000_media_type_copper:
- func->setup_physical_interface = e1000_setup_copper_link_80003es2lan;
+ func->setup_physical_interface =
+ e1000_setup_copper_link_80003es2lan;
func->check_for_link = e1000e_check_for_copper_link;
break;
case e1000_media_type_fiber:
diff --git a/drivers/net/e1000e/ethtool.c b/drivers/net/e1000e/ethtool.c
index 8ff3a8a..4fee336 100644
--- a/drivers/net/e1000e/ethtool.c
+++ b/drivers/net/e1000e/ethtool.c
@@ -567,7 +567,8 @@ static int e1000_set_eeprom(struct net_device *netdev,
if (eeprom->len == 0)
return -EOPNOTSUPP;
- if (eeprom->magic != (adapter->pdev->vendor | (adapter->pdev->device << 16)))
+ if (eeprom->magic != (adapter->pdev->vendor |
+ (adapter->pdev->device << 16)))
return -EFAULT;
if (adapter->flags & FLAG_READ_ONLY_NVM)
diff --git a/drivers/net/e1000e/lib.c b/drivers/net/e1000e/lib.c
index 513b4d1..b950db3 100644
--- a/drivers/net/e1000e/lib.c
+++ b/drivers/net/e1000e/lib.c
@@ -1135,7 +1135,8 @@ s32 e1000e_config_fc_after_link_up(struct e1000_hw *hw)
ret_val = e1e_rphy(hw, PHY_AUTONEG_ADV, &mii_nway_adv_reg);
if (ret_val)
return ret_val;
- ret_val = e1e_rphy(hw, PHY_LP_ABILITY, &mii_nway_lp_ability_reg);
+ ret_val = e1e_rphy(hw, PHY_LP_ABILITY,
+ &mii_nway_lp_ability_reg);
if (ret_val)
return ret_val;
@@ -1266,7 +1267,8 @@ s32 e1000e_config_fc_after_link_up(struct e1000_hw *hw)
* Read the status register for the current speed/duplex and store the current
* speed and duplex for copper connections.
**/
-s32 e1000e_get_speed_and_duplex_copper(struct e1000_hw *hw, u16 *speed, u16 *duplex)
+s32 e1000e_get_speed_and_duplex_copper(struct e1000_hw *hw, u16 *speed,
+ u16 *duplex)
{
u32 status;
@@ -1299,7 +1301,8 @@ s32 e1000e_get_speed_and_duplex_copper(struct e1000_hw *hw, u16 *speed, u16 *dup
* Sets the speed and duplex to gigabit full duplex (the only possible option)
* for fiber/serdes links.
**/
-s32 e1000e_get_speed_and_duplex_fiber_serdes(struct e1000_hw *hw, u16 *speed, u16 *duplex)
+s32 e1000e_get_speed_and_duplex_fiber_serdes(struct e1000_hw *hw, u16 *speed,
+ u16 *duplex)
{
*speed = SPEED_1000;
*duplex = FULL_DUPLEX;
@@ -2359,7 +2362,8 @@ bool e1000e_enable_tx_pkt_filtering(struct e1000_hw *hw)
len = E1000_MNG_DHCP_COOKIE_LENGTH >> 2;
offset = E1000_MNG_DHCP_COOKIE_OFFSET >> 2;
for (i = 0; i < len; i++)
- *(buffer + i) = E1000_READ_REG_ARRAY(hw, E1000_HOST_IF, offset + i);
+ *(buffer + i) = E1000_READ_REG_ARRAY(hw, E1000_HOST_IF,
+ offset + i);
hdr_csum = hdr->checksum;
hdr->checksum = 0;
csum = e1000_calculate_checksum((u8 *)hdr,
diff --git a/drivers/net/e1000e/netdev.c b/drivers/net/e1000e/netdev.c
index d71854f..bb6a1f5 100644
--- a/drivers/net/e1000e/netdev.c
+++ b/drivers/net/e1000e/netdev.c
@@ -601,7 +601,8 @@ static void e1000_alloc_rx_buffers_ps(struct e1000_adapter *adapter,
ps_page = &buffer_info->ps_pages[j];
if (j >= adapter->rx_ps_pages) {
/* all unused desc entries get hw null ptr */
- rx_desc->read.buffer_addr[j+1] = ~cpu_to_le64(0);
+ rx_desc->read.buffer_addr[j+1] =
+ ~cpu_to_le64(0);
continue;
}
if (!ps_page->page) {
@@ -871,7 +872,8 @@ static bool e1000_clean_rx_irq(struct e1000_adapter *adapter,
((u32)(rx_desc->errors) << 24),
le16_to_cpu(rx_desc->csum), skb);
- e1000_receive_skb(adapter, netdev, skb,status,rx_desc->special);
+ e1000_receive_skb(adapter, netdev, skb, status,
+ rx_desc->special);
next_desc:
rx_desc->status = 0;
@@ -2372,7 +2374,8 @@ err:
**/
static int e1000_clean(struct napi_struct *napi, int budget)
{
- struct e1000_adapter *adapter = container_of(napi, struct e1000_adapter, napi);
+ struct e1000_adapter *adapter = container_of(napi, struct e1000_adapter,
+ napi);
struct e1000_hw *hw = &adapter->hw;
struct net_device *poll_dev = adapter->netdev;
int tx_cleaned = 1, work_done = 0;
@@ -4664,9 +4667,9 @@ static int e1000_transfer_dhcp_info(struct e1000_adapter *adapter,
u16 length, offset;
if (vlan_tx_tag_present(skb)) {
- if (!((vlan_tx_tag_get(skb) == adapter->hw.mng_cookie.vlan_id) &&
- (adapter->hw.mng_cookie.status &
- E1000_MNG_DHCP_COOKIE_STATUS_VLAN)))
+ if (!((vlan_tx_tag_get(skb) == adapter->hw.mng_cookie.vlan_id)
+ && (adapter->hw.mng_cookie.status &
+ E1000_MNG_DHCP_COOKIE_STATUS_VLAN)))
return 0;
}
@@ -6079,7 +6082,8 @@ static DEFINE_PCI_DEVICE_TABLE(e1000_pci_tbl) = {
{ PCI_VDEVICE(INTEL, E1000_DEV_ID_82571EB_COPPER), board_82571 },
{ PCI_VDEVICE(INTEL, E1000_DEV_ID_82571EB_FIBER), board_82571 },
{ PCI_VDEVICE(INTEL, E1000_DEV_ID_82571EB_QUAD_COPPER), board_82571 },
- { PCI_VDEVICE(INTEL, E1000_DEV_ID_82571EB_QUAD_COPPER_LP), board_82571 },
+ { PCI_VDEVICE(INTEL, E1000_DEV_ID_82571EB_QUAD_COPPER_LP),
+ board_82571 },
{ PCI_VDEVICE(INTEL, E1000_DEV_ID_82571EB_QUAD_FIBER), board_82571 },
{ PCI_VDEVICE(INTEL, E1000_DEV_ID_82571EB_SERDES), board_82571 },
{ PCI_VDEVICE(INTEL, E1000_DEV_ID_82571EB_SERDES_DUAL), board_82571 },
diff --git a/drivers/net/e1000e/param.c b/drivers/net/e1000e/param.c
index 2687295..992be2b 100644
--- a/drivers/net/e1000e/param.c
+++ b/drivers/net/e1000e/param.c
@@ -147,7 +147,8 @@ E1000_PARAM(KumeranLockLoss, "Enable Kumeran lock loss workaround");
*
* Default Value: 1 (enabled)
*/
-E1000_PARAM(WriteProtectNVM, "Write-protect NVM [WARNING: disabling this can lead to corrupted NVM]");
+E1000_PARAM(WriteProtectNVM, "Write-protect NVM [WARNING: disabling "
+ "this can lead to corrupted NVM]");
/*
* Enable CRC Stripping
@@ -464,7 +465,8 @@ void __devinit e1000e_check_options(struct e1000_adapter *adapter)
if (adapter->flags & FLAG_IS_ICH) {
if (num_WriteProtectNVM > bd) {
- unsigned int write_protect_nvm = WriteProtectNVM[bd];
+ unsigned int write_protect_nvm =
+ WriteProtectNVM[bd];
e1000_validate_option(&write_protect_nvm, &opt,
adapter);
if (write_protect_nvm)
--
1.7.2.3
------------------------------------------------------------------------------
This SF Dev2Dev email is sponsored by:
WikiLeaks The End of the Free Internet
http://p.sf.net/sfu/therealnews-com
_______________________________________________
E1000-devel mailing list
E1000-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/e1000-devel
To learn more about Intel® Ethernet, visit http://communities.intel.com/community/wired
^ permalink raw reply related [flat|nested] 27+ messages in thread* [PATCH 4/7] e1000e: cleanup: fix long lines
2010-12-09 2:40 [PATCH 0/7] e1000e: cleanup Asbjoern Sloth Toennesen
` (9 preceding siblings ...)
2010-12-09 2:40 ` [PATCH 4/7] e1000e: cleanup: fix long lines Asbjoern Sloth Toennesen
@ 2010-12-09 2:40 ` Asbjoern Sloth Toennesen
2010-12-09 2:40 ` Asbjoern Sloth Toennesen
` (11 subsequent siblings)
22 siblings, 0 replies; 27+ messages in thread
From: Asbjoern Sloth Toennesen @ 2010-12-09 2:40 UTC (permalink / raw)
To: Jeff Kirsher, Jeff Kirsher; +Cc: e1000-devel, netdev, linux-kernel
This patch breaks long lines, so they do not exceed 80 characters.
Fixes 2 errors and 26 warnings reported by checkpatch.
Signed-off-by: Asbjoern Sloth Toennesen <asbjorn@asbjorn.biz>
---
drivers/net/e1000e/defines.h | 15 ++++++++++-----
drivers/net/e1000e/e1000.h | 27 ++++++++++++++++++---------
drivers/net/e1000e/es2lan.c | 3 ++-
drivers/net/e1000e/ethtool.c | 3 ++-
drivers/net/e1000e/lib.c | 12 ++++++++----
drivers/net/e1000e/netdev.c | 18 +++++++++++-------
drivers/net/e1000e/param.c | 6 ++++--
7 files changed, 55 insertions(+), 29 deletions(-)
diff --git a/drivers/net/e1000e/defines.h b/drivers/net/e1000e/defines.h
index 10760be..f1260fc 100644
--- a/drivers/net/e1000e/defines.h
+++ b/drivers/net/e1000e/defines.h
@@ -83,8 +83,10 @@
#define E1000_CTRL_EXT_LINK_MODE_PCIE_SERDES 0x00C00000
#define E1000_CTRL_EXT_EIAME 0x01000000
#define E1000_CTRL_EXT_DRV_LOAD 0x10000000 /* Driver loaded bit for FW */
-#define E1000_CTRL_EXT_IAME 0x08000000 /* Interrupt acknowledge Auto-mask */
-#define E1000_CTRL_EXT_INT_TIMER_CLR 0x20000000 /* Clear Interrupt timers after IMS clear */
+#define E1000_CTRL_EXT_IAME 0x08000000 /* Interrupt acknowledge
+ * Auto-mask */
+#define E1000_CTRL_EXT_INT_TIMER_CLR 0x20000000 /* Clear Interrupt timers
+ * after IMS clear */
#define E1000_CTRL_EXT_PBA_CLR 0x80000000 /* PBA Clear */
#define E1000_CTRL_EXT_PHYPDEN 0x00100000
@@ -247,7 +249,8 @@
#define E1000_STATUS_SPEED_1000 0x00000080 /* Speed 1000Mb/s */
#define E1000_STATUS_LAN_INIT_DONE 0x00000200 /* Lan Init Completion by NVM */
#define E1000_STATUS_PHYRA 0x00000400 /* PHY Reset Asserted */
-#define E1000_STATUS_GIO_MASTER_ENABLE 0x00080000 /* Status of Master requests. */
+#define E1000_STATUS_GIO_MASTER_ENABLE 0x00080000 /* Status of Master
+ * requests. */
/* Constants used to interpret the masked PCI-X bus speed. */
@@ -394,7 +397,8 @@
#define E1000_ICR_RXSEQ 0x00000008 /* Rx sequence error */
#define E1000_ICR_RXDMT0 0x00000010 /* Rx desc min. threshold (0) */
#define E1000_ICR_RXT0 0x00000080 /* Rx timer intr (ring 0) */
-#define E1000_ICR_INT_ASSERTED 0x80000000 /* If this bit asserted, the driver should claim the interrupt */
+#define E1000_ICR_INT_ASSERTED 0x80000000 /* If this bit asserted, the driver
+ * should claim the interrupt */
#define E1000_ICR_RXQ0 0x00100000 /* Rx Queue 0 Interrupt */
#define E1000_ICR_RXQ1 0x00200000 /* Rx Queue 1 Interrupt */
#define E1000_ICR_TXQ0 0x00400000 /* Tx Queue 0 Interrupt */
@@ -612,7 +616,8 @@
#define E1000_EECD_SEC1VAL 0x00400000 /* Sector One Valid */
#define E1000_EECD_SEC1VAL_VALID_MASK (E1000_EECD_AUTO_RD | E1000_EECD_PRES)
-#define E1000_NVM_RW_REG_DATA 16 /* Offset to data in NVM read/write registers */
+#define E1000_NVM_RW_REG_DATA 16 /* Offset to data in NVM
+ * read/write registers */
#define E1000_NVM_RW_REG_DONE 2 /* Offset to READ/WRITE done bit */
#define E1000_NVM_RW_REG_START 1 /* Start operation */
#define E1000_NVM_RW_ADDR_SHIFT 2 /* Shift to the address bits */
diff --git a/drivers/net/e1000e/e1000.h b/drivers/net/e1000e/e1000.h
index 47eb0ba..97fa58a 100644
--- a/drivers/net/e1000e/e1000.h
+++ b/drivers/net/e1000e/e1000.h
@@ -542,8 +542,10 @@ extern s32 e1000e_led_off_generic(struct e1000_hw *hw);
extern s32 e1000e_get_bus_info_pcie(struct e1000_hw *hw);
extern void e1000_set_lan_id_multi_port_pcie(struct e1000_hw *hw);
extern void e1000_set_lan_id_single_port(struct e1000_hw *hw);
-extern s32 e1000e_get_speed_and_duplex_copper(struct e1000_hw *hw, u16 *speed, u16 *duplex);
-extern s32 e1000e_get_speed_and_duplex_fiber_serdes(struct e1000_hw *hw, u16 *speed, u16 *duplex);
+extern s32 e1000e_get_speed_and_duplex_copper(struct e1000_hw *hw,
+ u16 *speed, u16 *duplex);
+extern s32 e1000e_get_speed_and_duplex_fiber_serdes(struct e1000_hw *hw,
+ u16 *speed, u16 *duplex);
extern s32 e1000e_disable_pcie_master(struct e1000_hw *hw);
extern s32 e1000e_get_auto_rd_done(struct e1000_hw *hw);
extern s32 e1000e_id_led_init(struct e1000_hw *hw);
@@ -566,7 +568,8 @@ extern void e1000e_config_collision_dist(struct e1000_hw *hw);
extern s32 e1000e_config_fc_after_link_up(struct e1000_hw *hw);
extern s32 e1000e_force_mac_fc(struct e1000_hw *hw);
extern s32 e1000e_blink_led(struct e1000_hw *hw);
-extern void e1000_write_vfta_generic(struct e1000_hw *hw, u32 offset, u32 value);
+extern void e1000_write_vfta_generic(struct e1000_hw *hw, u32 offset,
+ u32 value);
extern s32 e1000_check_alt_mac_addr_generic(struct e1000_hw *hw);
extern void e1000e_reset_adaptive(struct e1000_hw *hw);
extern void e1000e_update_adaptive(struct e1000_hw *hw);
@@ -600,7 +603,8 @@ extern s32 e1000e_write_phy_reg_bm(struct e1000_hw *hw, u32 offset, u16 data);
extern s32 e1000e_read_phy_reg_bm(struct e1000_hw *hw, u32 offset, u16 *data);
extern s32 e1000e_read_phy_reg_bm2(struct e1000_hw *hw, u32 offset, u16 *data);
extern s32 e1000e_write_phy_reg_bm2(struct e1000_hw *hw, u32 offset, u16 data);
-extern void e1000e_phy_force_speed_duplex_setup(struct e1000_hw *hw, u16 *phy_ctrl);
+extern void e1000e_phy_force_speed_duplex_setup(struct e1000_hw *hw,
+ u16 *phy_ctrl);
extern s32 e1000e_write_kmrn_reg(struct e1000_hw *hw, u32 offset, u16 data);
extern s32 e1000e_write_kmrn_reg_locked(struct e1000_hw *hw, u32 offset,
u16 data);
@@ -661,10 +665,12 @@ static inline s32 e1000_get_cable_length(struct e1000_hw *hw)
}
extern s32 e1000e_acquire_nvm(struct e1000_hw *hw);
-extern s32 e1000e_write_nvm_spi(struct e1000_hw *hw, u16 offset, u16 words, u16 *data);
+extern s32 e1000e_write_nvm_spi(struct e1000_hw *hw, u16 offset, u16 words,
+ u16 *data);
extern s32 e1000e_update_nvm_checksum_generic(struct e1000_hw *hw);
extern s32 e1000e_poll_eerd_eewr_done(struct e1000_hw *hw, int ee_reg);
-extern s32 e1000e_read_nvm_eerd(struct e1000_hw *hw, u16 offset, u16 words, u16 *data);
+extern s32 e1000e_read_nvm_eerd(struct e1000_hw *hw, u16 offset, u16 words,
+ u16 *data);
extern s32 e1000e_validate_nvm_checksum_generic(struct e1000_hw *hw);
extern void e1000e_release_nvm(struct e1000_hw *hw);
extern void e1000e_reload_nvm(struct e1000_hw *hw);
@@ -688,12 +694,14 @@ static inline s32 e1000e_update_nvm_checksum(struct e1000_hw *hw)
return hw->nvm.ops.update(hw);
}
-static inline s32 e1000_read_nvm(struct e1000_hw *hw, u16 offset, u16 words, u16 *data)
+static inline s32 e1000_read_nvm(struct e1000_hw *hw, u16 offset, u16 words,
+ u16 *data)
{
return hw->nvm.ops.read(hw, offset, words, data);
}
-static inline s32 e1000_write_nvm(struct e1000_hw *hw, u16 offset, u16 words, u16 *data)
+static inline s32 e1000_write_nvm(struct e1000_hw *hw, u16 offset, u16 words,
+ u16 *data)
{
return hw->nvm.ops.write(hw, offset, words, data);
}
@@ -710,7 +718,8 @@ static inline s32 e1000e_check_mng_mode(struct e1000_hw *hw)
extern bool e1000e_check_mng_mode_generic(struct e1000_hw *hw);
extern bool e1000e_enable_tx_pkt_filtering(struct e1000_hw *hw);
-extern s32 e1000e_mng_write_dhcp_info(struct e1000_hw *hw, u8 *buffer, u16 length);
+extern s32 e1000e_mng_write_dhcp_info(struct e1000_hw *hw, u8 *buffer,
+ u16 length);
static inline u32 __er32(struct e1000_hw *hw, unsigned long reg)
{
diff --git a/drivers/net/e1000e/es2lan.c b/drivers/net/e1000e/es2lan.c
index 6069e9f..56a1321 100644
--- a/drivers/net/e1000e/es2lan.c
+++ b/drivers/net/e1000e/es2lan.c
@@ -233,7 +233,8 @@ static s32 e1000_init_mac_params_80003es2lan(struct e1000_adapter *adapter)
/* check for link */
switch (hw->phy.media_type) {
case e1000_media_type_copper:
- func->setup_physical_interface = e1000_setup_copper_link_80003es2lan;
+ func->setup_physical_interface =
+ e1000_setup_copper_link_80003es2lan;
func->check_for_link = e1000e_check_for_copper_link;
break;
case e1000_media_type_fiber:
diff --git a/drivers/net/e1000e/ethtool.c b/drivers/net/e1000e/ethtool.c
index 8ff3a8a..4fee336 100644
--- a/drivers/net/e1000e/ethtool.c
+++ b/drivers/net/e1000e/ethtool.c
@@ -567,7 +567,8 @@ static int e1000_set_eeprom(struct net_device *netdev,
if (eeprom->len == 0)
return -EOPNOTSUPP;
- if (eeprom->magic != (adapter->pdev->vendor | (adapter->pdev->device << 16)))
+ if (eeprom->magic != (adapter->pdev->vendor |
+ (adapter->pdev->device << 16)))
return -EFAULT;
if (adapter->flags & FLAG_READ_ONLY_NVM)
diff --git a/drivers/net/e1000e/lib.c b/drivers/net/e1000e/lib.c
index 513b4d1..b950db3 100644
--- a/drivers/net/e1000e/lib.c
+++ b/drivers/net/e1000e/lib.c
@@ -1135,7 +1135,8 @@ s32 e1000e_config_fc_after_link_up(struct e1000_hw *hw)
ret_val = e1e_rphy(hw, PHY_AUTONEG_ADV, &mii_nway_adv_reg);
if (ret_val)
return ret_val;
- ret_val = e1e_rphy(hw, PHY_LP_ABILITY, &mii_nway_lp_ability_reg);
+ ret_val = e1e_rphy(hw, PHY_LP_ABILITY,
+ &mii_nway_lp_ability_reg);
if (ret_val)
return ret_val;
@@ -1266,7 +1267,8 @@ s32 e1000e_config_fc_after_link_up(struct e1000_hw *hw)
* Read the status register for the current speed/duplex and store the current
* speed and duplex for copper connections.
**/
-s32 e1000e_get_speed_and_duplex_copper(struct e1000_hw *hw, u16 *speed, u16 *duplex)
+s32 e1000e_get_speed_and_duplex_copper(struct e1000_hw *hw, u16 *speed,
+ u16 *duplex)
{
u32 status;
@@ -1299,7 +1301,8 @@ s32 e1000e_get_speed_and_duplex_copper(struct e1000_hw *hw, u16 *speed, u16 *dup
* Sets the speed and duplex to gigabit full duplex (the only possible option)
* for fiber/serdes links.
**/
-s32 e1000e_get_speed_and_duplex_fiber_serdes(struct e1000_hw *hw, u16 *speed, u16 *duplex)
+s32 e1000e_get_speed_and_duplex_fiber_serdes(struct e1000_hw *hw, u16 *speed,
+ u16 *duplex)
{
*speed = SPEED_1000;
*duplex = FULL_DUPLEX;
@@ -2359,7 +2362,8 @@ bool e1000e_enable_tx_pkt_filtering(struct e1000_hw *hw)
len = E1000_MNG_DHCP_COOKIE_LENGTH >> 2;
offset = E1000_MNG_DHCP_COOKIE_OFFSET >> 2;
for (i = 0; i < len; i++)
- *(buffer + i) = E1000_READ_REG_ARRAY(hw, E1000_HOST_IF, offset + i);
+ *(buffer + i) = E1000_READ_REG_ARRAY(hw, E1000_HOST_IF,
+ offset + i);
hdr_csum = hdr->checksum;
hdr->checksum = 0;
csum = e1000_calculate_checksum((u8 *)hdr,
diff --git a/drivers/net/e1000e/netdev.c b/drivers/net/e1000e/netdev.c
index d71854f..bb6a1f5 100644
--- a/drivers/net/e1000e/netdev.c
+++ b/drivers/net/e1000e/netdev.c
@@ -601,7 +601,8 @@ static void e1000_alloc_rx_buffers_ps(struct e1000_adapter *adapter,
ps_page = &buffer_info->ps_pages[j];
if (j >= adapter->rx_ps_pages) {
/* all unused desc entries get hw null ptr */
- rx_desc->read.buffer_addr[j+1] = ~cpu_to_le64(0);
+ rx_desc->read.buffer_addr[j+1] =
+ ~cpu_to_le64(0);
continue;
}
if (!ps_page->page) {
@@ -871,7 +872,8 @@ static bool e1000_clean_rx_irq(struct e1000_adapter *adapter,
((u32)(rx_desc->errors) << 24),
le16_to_cpu(rx_desc->csum), skb);
- e1000_receive_skb(adapter, netdev, skb,status,rx_desc->special);
+ e1000_receive_skb(adapter, netdev, skb, status,
+ rx_desc->special);
next_desc:
rx_desc->status = 0;
@@ -2372,7 +2374,8 @@ err:
**/
static int e1000_clean(struct napi_struct *napi, int budget)
{
- struct e1000_adapter *adapter = container_of(napi, struct e1000_adapter, napi);
+ struct e1000_adapter *adapter = container_of(napi, struct e1000_adapter,
+ napi);
struct e1000_hw *hw = &adapter->hw;
struct net_device *poll_dev = adapter->netdev;
int tx_cleaned = 1, work_done = 0;
@@ -4664,9 +4667,9 @@ static int e1000_transfer_dhcp_info(struct e1000_adapter *adapter,
u16 length, offset;
if (vlan_tx_tag_present(skb)) {
- if (!((vlan_tx_tag_get(skb) == adapter->hw.mng_cookie.vlan_id) &&
- (adapter->hw.mng_cookie.status &
- E1000_MNG_DHCP_COOKIE_STATUS_VLAN)))
+ if (!((vlan_tx_tag_get(skb) == adapter->hw.mng_cookie.vlan_id)
+ && (adapter->hw.mng_cookie.status &
+ E1000_MNG_DHCP_COOKIE_STATUS_VLAN)))
return 0;
}
@@ -6079,7 +6082,8 @@ static DEFINE_PCI_DEVICE_TABLE(e1000_pci_tbl) = {
{ PCI_VDEVICE(INTEL, E1000_DEV_ID_82571EB_COPPER), board_82571 },
{ PCI_VDEVICE(INTEL, E1000_DEV_ID_82571EB_FIBER), board_82571 },
{ PCI_VDEVICE(INTEL, E1000_DEV_ID_82571EB_QUAD_COPPER), board_82571 },
- { PCI_VDEVICE(INTEL, E1000_DEV_ID_82571EB_QUAD_COPPER_LP), board_82571 },
+ { PCI_VDEVICE(INTEL, E1000_DEV_ID_82571EB_QUAD_COPPER_LP),
+ board_82571 },
{ PCI_VDEVICE(INTEL, E1000_DEV_ID_82571EB_QUAD_FIBER), board_82571 },
{ PCI_VDEVICE(INTEL, E1000_DEV_ID_82571EB_SERDES), board_82571 },
{ PCI_VDEVICE(INTEL, E1000_DEV_ID_82571EB_SERDES_DUAL), board_82571 },
diff --git a/drivers/net/e1000e/param.c b/drivers/net/e1000e/param.c
index 2687295..992be2b 100644
--- a/drivers/net/e1000e/param.c
+++ b/drivers/net/e1000e/param.c
@@ -147,7 +147,8 @@ E1000_PARAM(KumeranLockLoss, "Enable Kumeran lock loss workaround");
*
* Default Value: 1 (enabled)
*/
-E1000_PARAM(WriteProtectNVM, "Write-protect NVM [WARNING: disabling this can lead to corrupted NVM]");
+E1000_PARAM(WriteProtectNVM, "Write-protect NVM [WARNING: disabling "
+ "this can lead to corrupted NVM]");
/*
* Enable CRC Stripping
@@ -464,7 +465,8 @@ void __devinit e1000e_check_options(struct e1000_adapter *adapter)
if (adapter->flags & FLAG_IS_ICH) {
if (num_WriteProtectNVM > bd) {
- unsigned int write_protect_nvm = WriteProtectNVM[bd];
+ unsigned int write_protect_nvm =
+ WriteProtectNVM[bd];
e1000_validate_option(&write_protect_nvm, &opt,
adapter);
if (write_protect_nvm)
--
1.7.2.3
^ permalink raw reply related [flat|nested] 27+ messages in thread* [PATCH 4/7] e1000e: cleanup: fix long lines
2010-12-09 2:40 [PATCH 0/7] e1000e: cleanup Asbjoern Sloth Toennesen
` (10 preceding siblings ...)
2010-12-09 2:40 ` Asbjoern Sloth Toennesen
@ 2010-12-09 2:40 ` Asbjoern Sloth Toennesen
2010-12-09 3:34 ` Ben Hutchings
2010-12-09 2:40 ` [PATCH 5/7] e1000e: cleanup: fix space issues in ich8_* structs Asbjoern Sloth Toennesen
` (10 subsequent siblings)
22 siblings, 1 reply; 27+ messages in thread
From: Asbjoern Sloth Toennesen @ 2010-12-09 2:40 UTC (permalink / raw)
To: Jeff Kirsher, Jeff Kirsher; +Cc: e1000-devel, netdev, linux-kernel
This patch breaks long lines, so they do not exceed 80 characters.
Fixes 2 errors and 26 warnings reported by checkpatch.
Signed-off-by: Asbjoern Sloth Toennesen <asbjorn@asbjorn.biz>
---
drivers/net/e1000e/defines.h | 15 ++++++++++-----
drivers/net/e1000e/e1000.h | 27 ++++++++++++++++++---------
drivers/net/e1000e/es2lan.c | 3 ++-
drivers/net/e1000e/ethtool.c | 3 ++-
drivers/net/e1000e/lib.c | 12 ++++++++----
drivers/net/e1000e/netdev.c | 18 +++++++++++-------
drivers/net/e1000e/param.c | 6 ++++--
7 files changed, 55 insertions(+), 29 deletions(-)
diff --git a/drivers/net/e1000e/defines.h b/drivers/net/e1000e/defines.h
index 10760be..f1260fc 100644
--- a/drivers/net/e1000e/defines.h
+++ b/drivers/net/e1000e/defines.h
@@ -83,8 +83,10 @@
#define E1000_CTRL_EXT_LINK_MODE_PCIE_SERDES 0x00C00000
#define E1000_CTRL_EXT_EIAME 0x01000000
#define E1000_CTRL_EXT_DRV_LOAD 0x10000000 /* Driver loaded bit for FW */
-#define E1000_CTRL_EXT_IAME 0x08000000 /* Interrupt acknowledge Auto-mask */
-#define E1000_CTRL_EXT_INT_TIMER_CLR 0x20000000 /* Clear Interrupt timers after IMS clear */
+#define E1000_CTRL_EXT_IAME 0x08000000 /* Interrupt acknowledge
+ * Auto-mask */
+#define E1000_CTRL_EXT_INT_TIMER_CLR 0x20000000 /* Clear Interrupt timers
+ * after IMS clear */
#define E1000_CTRL_EXT_PBA_CLR 0x80000000 /* PBA Clear */
#define E1000_CTRL_EXT_PHYPDEN 0x00100000
@@ -247,7 +249,8 @@
#define E1000_STATUS_SPEED_1000 0x00000080 /* Speed 1000Mb/s */
#define E1000_STATUS_LAN_INIT_DONE 0x00000200 /* Lan Init Completion by NVM */
#define E1000_STATUS_PHYRA 0x00000400 /* PHY Reset Asserted */
-#define E1000_STATUS_GIO_MASTER_ENABLE 0x00080000 /* Status of Master requests. */
+#define E1000_STATUS_GIO_MASTER_ENABLE 0x00080000 /* Status of Master
+ * requests. */
/* Constants used to interpret the masked PCI-X bus speed. */
@@ -394,7 +397,8 @@
#define E1000_ICR_RXSEQ 0x00000008 /* Rx sequence error */
#define E1000_ICR_RXDMT0 0x00000010 /* Rx desc min. threshold (0) */
#define E1000_ICR_RXT0 0x00000080 /* Rx timer intr (ring 0) */
-#define E1000_ICR_INT_ASSERTED 0x80000000 /* If this bit asserted, the driver should claim the interrupt */
+#define E1000_ICR_INT_ASSERTED 0x80000000 /* If this bit asserted, the driver
+ * should claim the interrupt */
#define E1000_ICR_RXQ0 0x00100000 /* Rx Queue 0 Interrupt */
#define E1000_ICR_RXQ1 0x00200000 /* Rx Queue 1 Interrupt */
#define E1000_ICR_TXQ0 0x00400000 /* Tx Queue 0 Interrupt */
@@ -612,7 +616,8 @@
#define E1000_EECD_SEC1VAL 0x00400000 /* Sector One Valid */
#define E1000_EECD_SEC1VAL_VALID_MASK (E1000_EECD_AUTO_RD | E1000_EECD_PRES)
-#define E1000_NVM_RW_REG_DATA 16 /* Offset to data in NVM read/write registers */
+#define E1000_NVM_RW_REG_DATA 16 /* Offset to data in NVM
+ * read/write registers */
#define E1000_NVM_RW_REG_DONE 2 /* Offset to READ/WRITE done bit */
#define E1000_NVM_RW_REG_START 1 /* Start operation */
#define E1000_NVM_RW_ADDR_SHIFT 2 /* Shift to the address bits */
diff --git a/drivers/net/e1000e/e1000.h b/drivers/net/e1000e/e1000.h
index 47eb0ba..97fa58a 100644
--- a/drivers/net/e1000e/e1000.h
+++ b/drivers/net/e1000e/e1000.h
@@ -542,8 +542,10 @@ extern s32 e1000e_led_off_generic(struct e1000_hw *hw);
extern s32 e1000e_get_bus_info_pcie(struct e1000_hw *hw);
extern void e1000_set_lan_id_multi_port_pcie(struct e1000_hw *hw);
extern void e1000_set_lan_id_single_port(struct e1000_hw *hw);
-extern s32 e1000e_get_speed_and_duplex_copper(struct e1000_hw *hw, u16 *speed, u16 *duplex);
-extern s32 e1000e_get_speed_and_duplex_fiber_serdes(struct e1000_hw *hw, u16 *speed, u16 *duplex);
+extern s32 e1000e_get_speed_and_duplex_copper(struct e1000_hw *hw,
+ u16 *speed, u16 *duplex);
+extern s32 e1000e_get_speed_and_duplex_fiber_serdes(struct e1000_hw *hw,
+ u16 *speed, u16 *duplex);
extern s32 e1000e_disable_pcie_master(struct e1000_hw *hw);
extern s32 e1000e_get_auto_rd_done(struct e1000_hw *hw);
extern s32 e1000e_id_led_init(struct e1000_hw *hw);
@@ -566,7 +568,8 @@ extern void e1000e_config_collision_dist(struct e1000_hw *hw);
extern s32 e1000e_config_fc_after_link_up(struct e1000_hw *hw);
extern s32 e1000e_force_mac_fc(struct e1000_hw *hw);
extern s32 e1000e_blink_led(struct e1000_hw *hw);
-extern void e1000_write_vfta_generic(struct e1000_hw *hw, u32 offset, u32 value);
+extern void e1000_write_vfta_generic(struct e1000_hw *hw, u32 offset,
+ u32 value);
extern s32 e1000_check_alt_mac_addr_generic(struct e1000_hw *hw);
extern void e1000e_reset_adaptive(struct e1000_hw *hw);
extern void e1000e_update_adaptive(struct e1000_hw *hw);
@@ -600,7 +603,8 @@ extern s32 e1000e_write_phy_reg_bm(struct e1000_hw *hw, u32 offset, u16 data);
extern s32 e1000e_read_phy_reg_bm(struct e1000_hw *hw, u32 offset, u16 *data);
extern s32 e1000e_read_phy_reg_bm2(struct e1000_hw *hw, u32 offset, u16 *data);
extern s32 e1000e_write_phy_reg_bm2(struct e1000_hw *hw, u32 offset, u16 data);
-extern void e1000e_phy_force_speed_duplex_setup(struct e1000_hw *hw, u16 *phy_ctrl);
+extern void e1000e_phy_force_speed_duplex_setup(struct e1000_hw *hw,
+ u16 *phy_ctrl);
extern s32 e1000e_write_kmrn_reg(struct e1000_hw *hw, u32 offset, u16 data);
extern s32 e1000e_write_kmrn_reg_locked(struct e1000_hw *hw, u32 offset,
u16 data);
@@ -661,10 +665,12 @@ static inline s32 e1000_get_cable_length(struct e1000_hw *hw)
}
extern s32 e1000e_acquire_nvm(struct e1000_hw *hw);
-extern s32 e1000e_write_nvm_spi(struct e1000_hw *hw, u16 offset, u16 words, u16 *data);
+extern s32 e1000e_write_nvm_spi(struct e1000_hw *hw, u16 offset, u16 words,
+ u16 *data);
extern s32 e1000e_update_nvm_checksum_generic(struct e1000_hw *hw);
extern s32 e1000e_poll_eerd_eewr_done(struct e1000_hw *hw, int ee_reg);
-extern s32 e1000e_read_nvm_eerd(struct e1000_hw *hw, u16 offset, u16 words, u16 *data);
+extern s32 e1000e_read_nvm_eerd(struct e1000_hw *hw, u16 offset, u16 words,
+ u16 *data);
extern s32 e1000e_validate_nvm_checksum_generic(struct e1000_hw *hw);
extern void e1000e_release_nvm(struct e1000_hw *hw);
extern void e1000e_reload_nvm(struct e1000_hw *hw);
@@ -688,12 +694,14 @@ static inline s32 e1000e_update_nvm_checksum(struct e1000_hw *hw)
return hw->nvm.ops.update(hw);
}
-static inline s32 e1000_read_nvm(struct e1000_hw *hw, u16 offset, u16 words, u16 *data)
+static inline s32 e1000_read_nvm(struct e1000_hw *hw, u16 offset, u16 words,
+ u16 *data)
{
return hw->nvm.ops.read(hw, offset, words, data);
}
-static inline s32 e1000_write_nvm(struct e1000_hw *hw, u16 offset, u16 words, u16 *data)
+static inline s32 e1000_write_nvm(struct e1000_hw *hw, u16 offset, u16 words,
+ u16 *data)
{
return hw->nvm.ops.write(hw, offset, words, data);
}
@@ -710,7 +718,8 @@ static inline s32 e1000e_check_mng_mode(struct e1000_hw *hw)
extern bool e1000e_check_mng_mode_generic(struct e1000_hw *hw);
extern bool e1000e_enable_tx_pkt_filtering(struct e1000_hw *hw);
-extern s32 e1000e_mng_write_dhcp_info(struct e1000_hw *hw, u8 *buffer, u16 length);
+extern s32 e1000e_mng_write_dhcp_info(struct e1000_hw *hw, u8 *buffer,
+ u16 length);
static inline u32 __er32(struct e1000_hw *hw, unsigned long reg)
{
diff --git a/drivers/net/e1000e/es2lan.c b/drivers/net/e1000e/es2lan.c
index 6069e9f..56a1321 100644
--- a/drivers/net/e1000e/es2lan.c
+++ b/drivers/net/e1000e/es2lan.c
@@ -233,7 +233,8 @@ static s32 e1000_init_mac_params_80003es2lan(struct e1000_adapter *adapter)
/* check for link */
switch (hw->phy.media_type) {
case e1000_media_type_copper:
- func->setup_physical_interface = e1000_setup_copper_link_80003es2lan;
+ func->setup_physical_interface =
+ e1000_setup_copper_link_80003es2lan;
func->check_for_link = e1000e_check_for_copper_link;
break;
case e1000_media_type_fiber:
diff --git a/drivers/net/e1000e/ethtool.c b/drivers/net/e1000e/ethtool.c
index 8ff3a8a..4fee336 100644
--- a/drivers/net/e1000e/ethtool.c
+++ b/drivers/net/e1000e/ethtool.c
@@ -567,7 +567,8 @@ static int e1000_set_eeprom(struct net_device *netdev,
if (eeprom->len == 0)
return -EOPNOTSUPP;
- if (eeprom->magic != (adapter->pdev->vendor | (adapter->pdev->device << 16)))
+ if (eeprom->magic != (adapter->pdev->vendor |
+ (adapter->pdev->device << 16)))
return -EFAULT;
if (adapter->flags & FLAG_READ_ONLY_NVM)
diff --git a/drivers/net/e1000e/lib.c b/drivers/net/e1000e/lib.c
index 513b4d1..b950db3 100644
--- a/drivers/net/e1000e/lib.c
+++ b/drivers/net/e1000e/lib.c
@@ -1135,7 +1135,8 @@ s32 e1000e_config_fc_after_link_up(struct e1000_hw *hw)
ret_val = e1e_rphy(hw, PHY_AUTONEG_ADV, &mii_nway_adv_reg);
if (ret_val)
return ret_val;
- ret_val = e1e_rphy(hw, PHY_LP_ABILITY, &mii_nway_lp_ability_reg);
+ ret_val = e1e_rphy(hw, PHY_LP_ABILITY,
+ &mii_nway_lp_ability_reg);
if (ret_val)
return ret_val;
@@ -1266,7 +1267,8 @@ s32 e1000e_config_fc_after_link_up(struct e1000_hw *hw)
* Read the status register for the current speed/duplex and store the current
* speed and duplex for copper connections.
**/
-s32 e1000e_get_speed_and_duplex_copper(struct e1000_hw *hw, u16 *speed, u16 *duplex)
+s32 e1000e_get_speed_and_duplex_copper(struct e1000_hw *hw, u16 *speed,
+ u16 *duplex)
{
u32 status;
@@ -1299,7 +1301,8 @@ s32 e1000e_get_speed_and_duplex_copper(struct e1000_hw *hw, u16 *speed, u16 *dup
* Sets the speed and duplex to gigabit full duplex (the only possible option)
* for fiber/serdes links.
**/
-s32 e1000e_get_speed_and_duplex_fiber_serdes(struct e1000_hw *hw, u16 *speed, u16 *duplex)
+s32 e1000e_get_speed_and_duplex_fiber_serdes(struct e1000_hw *hw, u16 *speed,
+ u16 *duplex)
{
*speed = SPEED_1000;
*duplex = FULL_DUPLEX;
@@ -2359,7 +2362,8 @@ bool e1000e_enable_tx_pkt_filtering(struct e1000_hw *hw)
len = E1000_MNG_DHCP_COOKIE_LENGTH >> 2;
offset = E1000_MNG_DHCP_COOKIE_OFFSET >> 2;
for (i = 0; i < len; i++)
- *(buffer + i) = E1000_READ_REG_ARRAY(hw, E1000_HOST_IF, offset + i);
+ *(buffer + i) = E1000_READ_REG_ARRAY(hw, E1000_HOST_IF,
+ offset + i);
hdr_csum = hdr->checksum;
hdr->checksum = 0;
csum = e1000_calculate_checksum((u8 *)hdr,
diff --git a/drivers/net/e1000e/netdev.c b/drivers/net/e1000e/netdev.c
index d71854f..bb6a1f5 100644
--- a/drivers/net/e1000e/netdev.c
+++ b/drivers/net/e1000e/netdev.c
@@ -601,7 +601,8 @@ static void e1000_alloc_rx_buffers_ps(struct e1000_adapter *adapter,
ps_page = &buffer_info->ps_pages[j];
if (j >= adapter->rx_ps_pages) {
/* all unused desc entries get hw null ptr */
- rx_desc->read.buffer_addr[j+1] = ~cpu_to_le64(0);
+ rx_desc->read.buffer_addr[j+1] =
+ ~cpu_to_le64(0);
continue;
}
if (!ps_page->page) {
@@ -871,7 +872,8 @@ static bool e1000_clean_rx_irq(struct e1000_adapter *adapter,
((u32)(rx_desc->errors) << 24),
le16_to_cpu(rx_desc->csum), skb);
- e1000_receive_skb(adapter, netdev, skb,status,rx_desc->special);
+ e1000_receive_skb(adapter, netdev, skb, status,
+ rx_desc->special);
next_desc:
rx_desc->status = 0;
@@ -2372,7 +2374,8 @@ err:
**/
static int e1000_clean(struct napi_struct *napi, int budget)
{
- struct e1000_adapter *adapter = container_of(napi, struct e1000_adapter, napi);
+ struct e1000_adapter *adapter = container_of(napi, struct e1000_adapter,
+ napi);
struct e1000_hw *hw = &adapter->hw;
struct net_device *poll_dev = adapter->netdev;
int tx_cleaned = 1, work_done = 0;
@@ -4664,9 +4667,9 @@ static int e1000_transfer_dhcp_info(struct e1000_adapter *adapter,
u16 length, offset;
if (vlan_tx_tag_present(skb)) {
- if (!((vlan_tx_tag_get(skb) == adapter->hw.mng_cookie.vlan_id) &&
- (adapter->hw.mng_cookie.status &
- E1000_MNG_DHCP_COOKIE_STATUS_VLAN)))
+ if (!((vlan_tx_tag_get(skb) == adapter->hw.mng_cookie.vlan_id)
+ && (adapter->hw.mng_cookie.status &
+ E1000_MNG_DHCP_COOKIE_STATUS_VLAN)))
return 0;
}
@@ -6079,7 +6082,8 @@ static DEFINE_PCI_DEVICE_TABLE(e1000_pci_tbl) = {
{ PCI_VDEVICE(INTEL, E1000_DEV_ID_82571EB_COPPER), board_82571 },
{ PCI_VDEVICE(INTEL, E1000_DEV_ID_82571EB_FIBER), board_82571 },
{ PCI_VDEVICE(INTEL, E1000_DEV_ID_82571EB_QUAD_COPPER), board_82571 },
- { PCI_VDEVICE(INTEL, E1000_DEV_ID_82571EB_QUAD_COPPER_LP), board_82571 },
+ { PCI_VDEVICE(INTEL, E1000_DEV_ID_82571EB_QUAD_COPPER_LP),
+ board_82571 },
{ PCI_VDEVICE(INTEL, E1000_DEV_ID_82571EB_QUAD_FIBER), board_82571 },
{ PCI_VDEVICE(INTEL, E1000_DEV_ID_82571EB_SERDES), board_82571 },
{ PCI_VDEVICE(INTEL, E1000_DEV_ID_82571EB_SERDES_DUAL), board_82571 },
diff --git a/drivers/net/e1000e/param.c b/drivers/net/e1000e/param.c
index 2687295..992be2b 100644
--- a/drivers/net/e1000e/param.c
+++ b/drivers/net/e1000e/param.c
@@ -147,7 +147,8 @@ E1000_PARAM(KumeranLockLoss, "Enable Kumeran lock loss workaround");
*
* Default Value: 1 (enabled)
*/
-E1000_PARAM(WriteProtectNVM, "Write-protect NVM [WARNING: disabling this can lead to corrupted NVM]");
+E1000_PARAM(WriteProtectNVM, "Write-protect NVM [WARNING: disabling "
+ "this can lead to corrupted NVM]");
/*
* Enable CRC Stripping
@@ -464,7 +465,8 @@ void __devinit e1000e_check_options(struct e1000_adapter *adapter)
if (adapter->flags & FLAG_IS_ICH) {
if (num_WriteProtectNVM > bd) {
- unsigned int write_protect_nvm = WriteProtectNVM[bd];
+ unsigned int write_protect_nvm =
+ WriteProtectNVM[bd];
e1000_validate_option(&write_protect_nvm, &opt,
adapter);
if (write_protect_nvm)
--
1.7.2.3
^ permalink raw reply related [flat|nested] 27+ messages in thread* Re: [PATCH 4/7] e1000e: cleanup: fix long lines
2010-12-09 2:40 ` Asbjoern Sloth Toennesen
@ 2010-12-09 3:34 ` Ben Hutchings
0 siblings, 0 replies; 27+ messages in thread
From: Ben Hutchings @ 2010-12-09 3:34 UTC (permalink / raw)
To: Asbjoern Sloth Toennesen; +Cc: Jeff Kirsher, e1000-devel, netdev, linux-kernel
On Thu, 2010-12-09 at 02:40 +0000, Asbjoern Sloth Toennesen wrote:
> This patch breaks long lines, so they do not exceed 80 characters.
>
> Fixes 2 errors and 26 warnings reported by checkpatch.
[...]
80-character lines are not a strict requirement. The kernel coding
style is about readability, not slavishingly following rules.
Ben.
--
Ben Hutchings, Senior Software Engineer, Solarflare Communications
Not speaking for my employer; that's the marketing department's job.
They asked us to note that Solarflare product names are trademarked.
^ permalink raw reply [flat|nested] 27+ messages in thread
* [PATCH 5/7] e1000e: cleanup: fix space issues in ich8_* structs
2010-12-09 2:40 [PATCH 0/7] e1000e: cleanup Asbjoern Sloth Toennesen
` (11 preceding siblings ...)
2010-12-09 2:40 ` Asbjoern Sloth Toennesen
@ 2010-12-09 2:40 ` Asbjoern Sloth Toennesen
2010-12-09 2:40 ` Asbjoern Sloth Toennesen
` (9 subsequent siblings)
22 siblings, 0 replies; 27+ messages in thread
From: Asbjoern Sloth Toennesen @ 2010-12-09 2:40 UTC (permalink / raw)
To: Jeff Kirsher, Jeff Kirsher; +Cc: e1000-devel, netdev, linux-kernel
Fix 18 checkpatch errors.
Signed-off-by: Asbjoern Sloth Toennesen <asbjorn@asbjorn.biz>
---
drivers/net/e1000e/ich8lan.c | 36 ++++++++++++++++++------------------
1 files changed, 18 insertions(+), 18 deletions(-)
diff --git a/drivers/net/e1000e/ich8lan.c b/drivers/net/e1000e/ich8lan.c
index c5a7726..a1dec6c 100644
--- a/drivers/net/e1000e/ich8lan.c
+++ b/drivers/net/e1000e/ich8lan.c
@@ -162,15 +162,15 @@
/* Offset 04h HSFSTS */
union ich8_hws_flash_status {
struct ich8_hsfsts {
- u16 flcdone :1; /* bit 0 Flash Cycle Done */
- u16 flcerr :1; /* bit 1 Flash Cycle Error */
- u16 dael :1; /* bit 2 Direct Access error Log */
- u16 berasesz :2; /* bit 4:3 Sector Erase Size */
- u16 flcinprog :1; /* bit 5 flash cycle in Progress */
- u16 reserved1 :2; /* bit 13:6 Reserved */
- u16 reserved2 :6; /* bit 13:6 Reserved */
- u16 fldesvalid :1; /* bit 14 Flash Descriptor Valid */
- u16 flockdn :1; /* bit 15 Flash Config Lock-Down */
+ u16 flcdone:1; /* bit 0 Flash Cycle Done */
+ u16 flcerr:1; /* bit 1 Flash Cycle Error */
+ u16 dael:1; /* bit 2 Direct Access error Log */
+ u16 berasesz:2; /* bit 4:3 Sector Erase Size */
+ u16 flcinprog:1; /* bit 5 flash cycle in Progress */
+ u16 reserved1:2; /* bit 13:6 Reserved */
+ u16 reserved2:6; /* bit 13:6 Reserved */
+ u16 fldesvalid:1; /* bit 14 Flash Descriptor Valid */
+ u16 flockdn:1; /* bit 15 Flash Config Lock-Down */
} hsf_status;
u16 regval;
};
@@ -179,11 +179,11 @@ union ich8_hws_flash_status {
/* Offset 06h FLCTL */
union ich8_hws_flash_ctrl {
struct ich8_hsflctl {
- u16 flcgo :1; /* 0 Flash Cycle Go */
- u16 flcycle :2; /* 2:1 Flash Cycle */
- u16 reserved :5; /* 7:3 Reserved */
- u16 fldbcount :2; /* 9:8 Flash Data Byte Count */
- u16 flockdn :6; /* 15:10 Reserved */
+ u16 flcgo:1; /* 0 Flash Cycle Go */
+ u16 flcycle:2; /* 2:1 Flash Cycle */
+ u16 reserved:5; /* 7:3 Reserved */
+ u16 fldbcount:2; /* 9:8 Flash Data Byte Count */
+ u16 flockdn:6; /* 15:10 Reserved */
} hsf_ctrl;
u16 regval;
};
@@ -191,10 +191,10 @@ union ich8_hws_flash_ctrl {
/* ICH Flash Region Access Permissions */
union ich8_hws_flash_regacc {
struct ich8_flracc {
- u32 grra :8; /* 0:7 GbE region Read Access */
- u32 grwa :8; /* 8:15 GbE region Write Access */
- u32 gmrag :8; /* 23:16 GbE Master Read Access Grant */
- u32 gmwag :8; /* 31:24 GbE Master Write Access Grant */
+ u32 grra:8; /* 0:7 GbE region Read Access */
+ u32 grwa:8; /* 8:15 GbE region Write Access */
+ u32 gmrag:8; /* 23:16 GbE Master Read Access Grant */
+ u32 gmwag:8; /* 31:24 GbE Master Write Access Grant */
} hsf_flregacc;
u16 regval;
};
--
1.7.2.3
^ permalink raw reply related [flat|nested] 27+ messages in thread* [PATCH 5/7] e1000e: cleanup: fix space issues in ich8_* structs
2010-12-09 2:40 [PATCH 0/7] e1000e: cleanup Asbjoern Sloth Toennesen
` (12 preceding siblings ...)
2010-12-09 2:40 ` [PATCH 5/7] e1000e: cleanup: fix space issues in ich8_* structs Asbjoern Sloth Toennesen
@ 2010-12-09 2:40 ` Asbjoern Sloth Toennesen
2010-12-09 2:40 ` Asbjoern Sloth Toennesen
` (8 subsequent siblings)
22 siblings, 0 replies; 27+ messages in thread
From: Asbjoern Sloth Toennesen @ 2010-12-09 2:40 UTC (permalink / raw)
To: Jeff Kirsher, Jeff Kirsher; +Cc: e1000-devel, netdev, linux-kernel
Fix 18 checkpatch errors.
Signed-off-by: Asbjoern Sloth Toennesen <asbjorn@asbjorn.biz>
---
drivers/net/e1000e/ich8lan.c | 36 ++++++++++++++++++------------------
1 files changed, 18 insertions(+), 18 deletions(-)
diff --git a/drivers/net/e1000e/ich8lan.c b/drivers/net/e1000e/ich8lan.c
index c5a7726..a1dec6c 100644
--- a/drivers/net/e1000e/ich8lan.c
+++ b/drivers/net/e1000e/ich8lan.c
@@ -162,15 +162,15 @@
/* Offset 04h HSFSTS */
union ich8_hws_flash_status {
struct ich8_hsfsts {
- u16 flcdone :1; /* bit 0 Flash Cycle Done */
- u16 flcerr :1; /* bit 1 Flash Cycle Error */
- u16 dael :1; /* bit 2 Direct Access error Log */
- u16 berasesz :2; /* bit 4:3 Sector Erase Size */
- u16 flcinprog :1; /* bit 5 flash cycle in Progress */
- u16 reserved1 :2; /* bit 13:6 Reserved */
- u16 reserved2 :6; /* bit 13:6 Reserved */
- u16 fldesvalid :1; /* bit 14 Flash Descriptor Valid */
- u16 flockdn :1; /* bit 15 Flash Config Lock-Down */
+ u16 flcdone:1; /* bit 0 Flash Cycle Done */
+ u16 flcerr:1; /* bit 1 Flash Cycle Error */
+ u16 dael:1; /* bit 2 Direct Access error Log */
+ u16 berasesz:2; /* bit 4:3 Sector Erase Size */
+ u16 flcinprog:1; /* bit 5 flash cycle in Progress */
+ u16 reserved1:2; /* bit 13:6 Reserved */
+ u16 reserved2:6; /* bit 13:6 Reserved */
+ u16 fldesvalid:1; /* bit 14 Flash Descriptor Valid */
+ u16 flockdn:1; /* bit 15 Flash Config Lock-Down */
} hsf_status;
u16 regval;
};
@@ -179,11 +179,11 @@ union ich8_hws_flash_status {
/* Offset 06h FLCTL */
union ich8_hws_flash_ctrl {
struct ich8_hsflctl {
- u16 flcgo :1; /* 0 Flash Cycle Go */
- u16 flcycle :2; /* 2:1 Flash Cycle */
- u16 reserved :5; /* 7:3 Reserved */
- u16 fldbcount :2; /* 9:8 Flash Data Byte Count */
- u16 flockdn :6; /* 15:10 Reserved */
+ u16 flcgo:1; /* 0 Flash Cycle Go */
+ u16 flcycle:2; /* 2:1 Flash Cycle */
+ u16 reserved:5; /* 7:3 Reserved */
+ u16 fldbcount:2; /* 9:8 Flash Data Byte Count */
+ u16 flockdn:6; /* 15:10 Reserved */
} hsf_ctrl;
u16 regval;
};
@@ -191,10 +191,10 @@ union ich8_hws_flash_ctrl {
/* ICH Flash Region Access Permissions */
union ich8_hws_flash_regacc {
struct ich8_flracc {
- u32 grra :8; /* 0:7 GbE region Read Access */
- u32 grwa :8; /* 8:15 GbE region Write Access */
- u32 gmrag :8; /* 23:16 GbE Master Read Access Grant */
- u32 gmwag :8; /* 31:24 GbE Master Write Access Grant */
+ u32 grra:8; /* 0:7 GbE region Read Access */
+ u32 grwa:8; /* 8:15 GbE region Write Access */
+ u32 gmrag:8; /* 23:16 GbE Master Read Access Grant */
+ u32 gmwag:8; /* 31:24 GbE Master Write Access Grant */
} hsf_flregacc;
u16 regval;
};
--
1.7.2.3
------------------------------------------------------------------------------
This SF Dev2Dev email is sponsored by:
WikiLeaks The End of the Free Internet
http://p.sf.net/sfu/therealnews-com
_______________________________________________
E1000-devel mailing list
E1000-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/e1000-devel
To learn more about Intel® Ethernet, visit http://communities.intel.com/community/wired
^ permalink raw reply related [flat|nested] 27+ messages in thread* [PATCH 5/7] e1000e: cleanup: fix space issues in ich8_* structs
2010-12-09 2:40 [PATCH 0/7] e1000e: cleanup Asbjoern Sloth Toennesen
` (13 preceding siblings ...)
2010-12-09 2:40 ` Asbjoern Sloth Toennesen
@ 2010-12-09 2:40 ` Asbjoern Sloth Toennesen
2010-12-09 2:40 ` [PATCH 6/7] e1000e: cleanup: swap arguments to avoid checkpatch errors Asbjoern Sloth Toennesen
` (7 subsequent siblings)
22 siblings, 0 replies; 27+ messages in thread
From: Asbjoern Sloth Toennesen @ 2010-12-09 2:40 UTC (permalink / raw)
To: Jeff Kirsher, Jeff Kirsher; +Cc: e1000-devel, netdev, linux-kernel
Fix 18 checkpatch errors.
Signed-off-by: Asbjoern Sloth Toennesen <asbjorn@asbjorn.biz>
---
drivers/net/e1000e/ich8lan.c | 36 ++++++++++++++++++------------------
1 files changed, 18 insertions(+), 18 deletions(-)
diff --git a/drivers/net/e1000e/ich8lan.c b/drivers/net/e1000e/ich8lan.c
index c5a7726..a1dec6c 100644
--- a/drivers/net/e1000e/ich8lan.c
+++ b/drivers/net/e1000e/ich8lan.c
@@ -162,15 +162,15 @@
/* Offset 04h HSFSTS */
union ich8_hws_flash_status {
struct ich8_hsfsts {
- u16 flcdone :1; /* bit 0 Flash Cycle Done */
- u16 flcerr :1; /* bit 1 Flash Cycle Error */
- u16 dael :1; /* bit 2 Direct Access error Log */
- u16 berasesz :2; /* bit 4:3 Sector Erase Size */
- u16 flcinprog :1; /* bit 5 flash cycle in Progress */
- u16 reserved1 :2; /* bit 13:6 Reserved */
- u16 reserved2 :6; /* bit 13:6 Reserved */
- u16 fldesvalid :1; /* bit 14 Flash Descriptor Valid */
- u16 flockdn :1; /* bit 15 Flash Config Lock-Down */
+ u16 flcdone:1; /* bit 0 Flash Cycle Done */
+ u16 flcerr:1; /* bit 1 Flash Cycle Error */
+ u16 dael:1; /* bit 2 Direct Access error Log */
+ u16 berasesz:2; /* bit 4:3 Sector Erase Size */
+ u16 flcinprog:1; /* bit 5 flash cycle in Progress */
+ u16 reserved1:2; /* bit 13:6 Reserved */
+ u16 reserved2:6; /* bit 13:6 Reserved */
+ u16 fldesvalid:1; /* bit 14 Flash Descriptor Valid */
+ u16 flockdn:1; /* bit 15 Flash Config Lock-Down */
} hsf_status;
u16 regval;
};
@@ -179,11 +179,11 @@ union ich8_hws_flash_status {
/* Offset 06h FLCTL */
union ich8_hws_flash_ctrl {
struct ich8_hsflctl {
- u16 flcgo :1; /* 0 Flash Cycle Go */
- u16 flcycle :2; /* 2:1 Flash Cycle */
- u16 reserved :5; /* 7:3 Reserved */
- u16 fldbcount :2; /* 9:8 Flash Data Byte Count */
- u16 flockdn :6; /* 15:10 Reserved */
+ u16 flcgo:1; /* 0 Flash Cycle Go */
+ u16 flcycle:2; /* 2:1 Flash Cycle */
+ u16 reserved:5; /* 7:3 Reserved */
+ u16 fldbcount:2; /* 9:8 Flash Data Byte Count */
+ u16 flockdn:6; /* 15:10 Reserved */
} hsf_ctrl;
u16 regval;
};
@@ -191,10 +191,10 @@ union ich8_hws_flash_ctrl {
/* ICH Flash Region Access Permissions */
union ich8_hws_flash_regacc {
struct ich8_flracc {
- u32 grra :8; /* 0:7 GbE region Read Access */
- u32 grwa :8; /* 8:15 GbE region Write Access */
- u32 gmrag :8; /* 23:16 GbE Master Read Access Grant */
- u32 gmwag :8; /* 31:24 GbE Master Write Access Grant */
+ u32 grra:8; /* 0:7 GbE region Read Access */
+ u32 grwa:8; /* 8:15 GbE region Write Access */
+ u32 gmrag:8; /* 23:16 GbE Master Read Access Grant */
+ u32 gmwag:8; /* 31:24 GbE Master Write Access Grant */
} hsf_flregacc;
u16 regval;
};
--
1.7.2.3
^ permalink raw reply related [flat|nested] 27+ messages in thread* [PATCH 6/7] e1000e: cleanup: swap arguments to avoid checkpatch errors
2010-12-09 2:40 [PATCH 0/7] e1000e: cleanup Asbjoern Sloth Toennesen
` (14 preceding siblings ...)
2010-12-09 2:40 ` Asbjoern Sloth Toennesen
@ 2010-12-09 2:40 ` Asbjoern Sloth Toennesen
2010-12-09 2:40 ` Asbjoern Sloth Toennesen
` (6 subsequent siblings)
22 siblings, 0 replies; 27+ messages in thread
From: Asbjoern Sloth Toennesen @ 2010-12-09 2:40 UTC (permalink / raw)
To: Jeff Kirsher, Jeff Kirsher; +Cc: e1000-devel, netdev, linux-kernel
Swap argument order in order to avoid checkpatch treating it as an
unary operation, instead of an binary one, and obtain consistency
with the 3 other similar assignments in netdev.c (tdlen & rdlen).
This patch fixes 3 checkpatch errors.
Signed-off-by: Asbjoern Sloth Toennesen <asbjorn@asbjorn.biz>
---
drivers/net/e1000e/netdev.c | 6 +++---
1 files changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/net/e1000e/netdev.c b/drivers/net/e1000e/netdev.c
index bb6a1f5..bdd3774 100644
--- a/drivers/net/e1000e/netdev.c
+++ b/drivers/net/e1000e/netdev.c
@@ -2059,7 +2059,7 @@ int e1000e_setup_tx_resources(struct e1000_adapter *adapter)
struct e1000_ring *tx_ring = adapter->tx_ring;
int err = -ENOMEM, size;
- size = sizeof(struct e1000_buffer) * tx_ring->count;
+ size = tx_ring->count * sizeof(struct e1000_buffer);
tx_ring->buffer_info = vzalloc(size);
if (!tx_ring->buffer_info)
goto err;
@@ -2094,7 +2094,7 @@ int e1000e_setup_rx_resources(struct e1000_adapter *adapter)
struct e1000_buffer *buffer_info;
int i, size, desc_len, err = -ENOMEM;
- size = sizeof(struct e1000_buffer) * rx_ring->count;
+ size = rx_ring->count * sizeof(struct e1000_buffer);
rx_ring->buffer_info = vzalloc(size);
if (!rx_ring->buffer_info)
goto err;
@@ -2151,7 +2151,7 @@ static void e1000_clean_tx_ring(struct e1000_adapter *adapter)
e1000_put_txbuf(adapter, buffer_info);
}
- size = sizeof(struct e1000_buffer) * tx_ring->count;
+ size = tx_ring->count * sizeof(struct e1000_buffer);
memset(tx_ring->buffer_info, 0, size);
memset(tx_ring->desc, 0, tx_ring->size);
--
1.7.2.3
------------------------------------------------------------------------------
This SF Dev2Dev email is sponsored by:
WikiLeaks The End of the Free Internet
http://p.sf.net/sfu/therealnews-com
_______________________________________________
E1000-devel mailing list
E1000-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/e1000-devel
To learn more about Intel® Ethernet, visit http://communities.intel.com/community/wired
^ permalink raw reply related [flat|nested] 27+ messages in thread* [PATCH 6/7] e1000e: cleanup: swap arguments to avoid checkpatch errors
2010-12-09 2:40 [PATCH 0/7] e1000e: cleanup Asbjoern Sloth Toennesen
` (15 preceding siblings ...)
2010-12-09 2:40 ` [PATCH 6/7] e1000e: cleanup: swap arguments to avoid checkpatch errors Asbjoern Sloth Toennesen
@ 2010-12-09 2:40 ` Asbjoern Sloth Toennesen
2010-12-09 3:32 ` Ben Hutchings
2010-12-09 2:40 ` Asbjoern Sloth Toennesen
` (5 subsequent siblings)
22 siblings, 1 reply; 27+ messages in thread
From: Asbjoern Sloth Toennesen @ 2010-12-09 2:40 UTC (permalink / raw)
To: Jeff Kirsher, Jeff Kirsher; +Cc: e1000-devel, netdev, linux-kernel
Swap argument order in order to avoid checkpatch treating it as an
unary operation, instead of an binary one, and obtain consistency
with the 3 other similar assignments in netdev.c (tdlen & rdlen).
This patch fixes 3 checkpatch errors.
Signed-off-by: Asbjoern Sloth Toennesen <asbjorn@asbjorn.biz>
---
drivers/net/e1000e/netdev.c | 6 +++---
1 files changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/net/e1000e/netdev.c b/drivers/net/e1000e/netdev.c
index bb6a1f5..bdd3774 100644
--- a/drivers/net/e1000e/netdev.c
+++ b/drivers/net/e1000e/netdev.c
@@ -2059,7 +2059,7 @@ int e1000e_setup_tx_resources(struct e1000_adapter *adapter)
struct e1000_ring *tx_ring = adapter->tx_ring;
int err = -ENOMEM, size;
- size = sizeof(struct e1000_buffer) * tx_ring->count;
+ size = tx_ring->count * sizeof(struct e1000_buffer);
tx_ring->buffer_info = vzalloc(size);
if (!tx_ring->buffer_info)
goto err;
@@ -2094,7 +2094,7 @@ int e1000e_setup_rx_resources(struct e1000_adapter *adapter)
struct e1000_buffer *buffer_info;
int i, size, desc_len, err = -ENOMEM;
- size = sizeof(struct e1000_buffer) * rx_ring->count;
+ size = rx_ring->count * sizeof(struct e1000_buffer);
rx_ring->buffer_info = vzalloc(size);
if (!rx_ring->buffer_info)
goto err;
@@ -2151,7 +2151,7 @@ static void e1000_clean_tx_ring(struct e1000_adapter *adapter)
e1000_put_txbuf(adapter, buffer_info);
}
- size = sizeof(struct e1000_buffer) * tx_ring->count;
+ size = tx_ring->count * sizeof(struct e1000_buffer);
memset(tx_ring->buffer_info, 0, size);
memset(tx_ring->desc, 0, tx_ring->size);
--
1.7.2.3
^ permalink raw reply related [flat|nested] 27+ messages in thread* Re: [PATCH 6/7] e1000e: cleanup: swap arguments to avoid checkpatch errors
2010-12-09 2:40 ` Asbjoern Sloth Toennesen
@ 2010-12-09 3:32 ` Ben Hutchings
2010-12-09 10:34 ` Florian Mickler
0 siblings, 1 reply; 27+ messages in thread
From: Ben Hutchings @ 2010-12-09 3:32 UTC (permalink / raw)
To: Asbjoern Sloth Toennesen; +Cc: e1000-devel, netdev, Jeff Kirsher, linux-kernel
On Thu, 2010-12-09 at 02:40 +0000, Asbjoern Sloth Toennesen wrote:
> Swap argument order in order to avoid checkpatch treating it as an
> unary operation, instead of an binary one, and obtain consistency
> with the 3 other similar assignments in netdev.c (tdlen & rdlen).
>
> This patch fixes 3 checkpatch errors.
You have got to be kidding. If the checkpatch warning offends you, fix
the bug in checkpatch instead of changing perfectly good code.
Ben.
> Signed-off-by: Asbjoern Sloth Toennesen <asbjorn@asbjorn.biz>
> ---
> drivers/net/e1000e/netdev.c | 6 +++---
> 1 files changed, 3 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/net/e1000e/netdev.c b/drivers/net/e1000e/netdev.c
> index bb6a1f5..bdd3774 100644
> --- a/drivers/net/e1000e/netdev.c
> +++ b/drivers/net/e1000e/netdev.c
> @@ -2059,7 +2059,7 @@ int e1000e_setup_tx_resources(struct e1000_adapter *adapter)
> struct e1000_ring *tx_ring = adapter->tx_ring;
> int err = -ENOMEM, size;
>
> - size = sizeof(struct e1000_buffer) * tx_ring->count;
> + size = tx_ring->count * sizeof(struct e1000_buffer);
> tx_ring->buffer_info = vzalloc(size);
> if (!tx_ring->buffer_info)
> goto err;
> @@ -2094,7 +2094,7 @@ int e1000e_setup_rx_resources(struct e1000_adapter *adapter)
> struct e1000_buffer *buffer_info;
> int i, size, desc_len, err = -ENOMEM;
>
> - size = sizeof(struct e1000_buffer) * rx_ring->count;
> + size = rx_ring->count * sizeof(struct e1000_buffer);
> rx_ring->buffer_info = vzalloc(size);
> if (!rx_ring->buffer_info)
> goto err;
> @@ -2151,7 +2151,7 @@ static void e1000_clean_tx_ring(struct e1000_adapter *adapter)
> e1000_put_txbuf(adapter, buffer_info);
> }
>
> - size = sizeof(struct e1000_buffer) * tx_ring->count;
> + size = tx_ring->count * sizeof(struct e1000_buffer);
> memset(tx_ring->buffer_info, 0, size);
>
> memset(tx_ring->desc, 0, tx_ring->size);
--
Ben Hutchings, Senior Software Engineer, Solarflare Communications
Not speaking for my employer; that's the marketing department's job.
They asked us to note that Solarflare product names are trademarked.
------------------------------------------------------------------------------
This SF Dev2Dev email is sponsored by:
WikiLeaks The End of the Free Internet
http://p.sf.net/sfu/therealnews-com
_______________________________________________
E1000-devel mailing list
E1000-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/e1000-devel
To learn more about Intel® Ethernet, visit http://communities.intel.com/community/wired
^ permalink raw reply [flat|nested] 27+ messages in thread
* Re: [PATCH 6/7] e1000e: cleanup: swap arguments to avoid checkpatch errors
2010-12-09 3:32 ` Ben Hutchings
@ 2010-12-09 10:34 ` Florian Mickler
0 siblings, 0 replies; 27+ messages in thread
From: Florian Mickler @ 2010-12-09 10:34 UTC (permalink / raw)
To: Ben Hutchings
Cc: Asbjoern Sloth Toennesen, e1000-devel, netdev, Jeff Kirsher,
linux-kernel, Andrew Morton
On Thu, 09 Dec 2010 03:32:28 +0000
Ben Hutchings <bhutchings@solarflare.com> wrote:
> On Thu, 2010-12-09 at 02:40 +0000, Asbjoern Sloth Toennesen wrote:
> > Swap argument order in order to avoid checkpatch treating it as an
> > unary operation, instead of an binary one, and obtain consistency
> > with the 3 other similar assignments in netdev.c (tdlen & rdlen).
> >
> > This patch fixes 3 checkpatch errors.
>
> You have got to be kidding. If the checkpatch warning offends you, fix
> the bug in checkpatch instead of changing perfectly good code.
>
> Ben.
That bug is fixed already:
https://patchwork.kernel.org/patch/299172/
Andrew picked it up.
Regards,
Flo
^ permalink raw reply [flat|nested] 27+ messages in thread
* [PATCH 6/7] e1000e: cleanup: swap arguments to avoid checkpatch errors
2010-12-09 2:40 [PATCH 0/7] e1000e: cleanup Asbjoern Sloth Toennesen
` (16 preceding siblings ...)
2010-12-09 2:40 ` Asbjoern Sloth Toennesen
@ 2010-12-09 2:40 ` Asbjoern Sloth Toennesen
2010-12-09 2:40 ` [PATCH 7/7] e1000e: cleanup: fix copyright notices to preferred style Asbjoern Sloth Toennesen
` (4 subsequent siblings)
22 siblings, 0 replies; 27+ messages in thread
From: Asbjoern Sloth Toennesen @ 2010-12-09 2:40 UTC (permalink / raw)
To: Jeff Kirsher, Jeff Kirsher; +Cc: e1000-devel, netdev, linux-kernel
Swap argument order in order to avoid checkpatch treating it as an
unary operation, instead of an binary one, and obtain consistency
with the 3 other similar assignments in netdev.c (tdlen & rdlen).
This patch fixes 3 checkpatch errors.
Signed-off-by: Asbjoern Sloth Toennesen <asbjorn@asbjorn.biz>
---
drivers/net/e1000e/netdev.c | 6 +++---
1 files changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/net/e1000e/netdev.c b/drivers/net/e1000e/netdev.c
index bb6a1f5..bdd3774 100644
--- a/drivers/net/e1000e/netdev.c
+++ b/drivers/net/e1000e/netdev.c
@@ -2059,7 +2059,7 @@ int e1000e_setup_tx_resources(struct e1000_adapter *adapter)
struct e1000_ring *tx_ring = adapter->tx_ring;
int err = -ENOMEM, size;
- size = sizeof(struct e1000_buffer) * tx_ring->count;
+ size = tx_ring->count * sizeof(struct e1000_buffer);
tx_ring->buffer_info = vzalloc(size);
if (!tx_ring->buffer_info)
goto err;
@@ -2094,7 +2094,7 @@ int e1000e_setup_rx_resources(struct e1000_adapter *adapter)
struct e1000_buffer *buffer_info;
int i, size, desc_len, err = -ENOMEM;
- size = sizeof(struct e1000_buffer) * rx_ring->count;
+ size = rx_ring->count * sizeof(struct e1000_buffer);
rx_ring->buffer_info = vzalloc(size);
if (!rx_ring->buffer_info)
goto err;
@@ -2151,7 +2151,7 @@ static void e1000_clean_tx_ring(struct e1000_adapter *adapter)
e1000_put_txbuf(adapter, buffer_info);
}
- size = sizeof(struct e1000_buffer) * tx_ring->count;
+ size = tx_ring->count * sizeof(struct e1000_buffer);
memset(tx_ring->buffer_info, 0, size);
memset(tx_ring->desc, 0, tx_ring->size);
--
1.7.2.3
^ permalink raw reply related [flat|nested] 27+ messages in thread* [PATCH 7/7] e1000e: cleanup: fix copyright notices to preferred style
2010-12-09 2:40 [PATCH 0/7] e1000e: cleanup Asbjoern Sloth Toennesen
` (17 preceding siblings ...)
2010-12-09 2:40 ` Asbjoern Sloth Toennesen
@ 2010-12-09 2:40 ` Asbjoern Sloth Toennesen
2010-12-09 2:40 ` Asbjoern Sloth Toennesen
` (3 subsequent siblings)
22 siblings, 0 replies; 27+ messages in thread
From: Asbjoern Sloth Toennesen @ 2010-12-09 2:40 UTC (permalink / raw)
To: Jeff Kirsher, Jeff Kirsher; +Cc: e1000-devel, netdev, linux-kernel
Reformat the copyright notices in e1001e, to follow the preferred style
for multi-line comments, as outlined in Documentation/CodingStyle.
Prior to 0c73b4e, the current style generated an "Missing space after"
warning per line.
Signed-off-by: Asbjoern Sloth Toennesen <asbjorn@asbjorn.biz>
---
drivers/net/e1000e/82571.c | 52 +++++++++++++++++++++---------------------
drivers/net/e1000e/defines.h | 52 +++++++++++++++++++++---------------------
drivers/net/e1000e/e1000.h | 52 +++++++++++++++++++++---------------------
drivers/net/e1000e/es2lan.c | 52 +++++++++++++++++++++---------------------
drivers/net/e1000e/ethtool.c | 52 +++++++++++++++++++++---------------------
drivers/net/e1000e/hw.h | 52 +++++++++++++++++++++---------------------
drivers/net/e1000e/ich8lan.c | 52 +++++++++++++++++++++---------------------
drivers/net/e1000e/lib.c | 52 +++++++++++++++++++++---------------------
drivers/net/e1000e/netdev.c | 52 +++++++++++++++++++++---------------------
drivers/net/e1000e/param.c | 52 +++++++++++++++++++++---------------------
drivers/net/e1000e/phy.c | 52 +++++++++++++++++++++---------------------
11 files changed, 286 insertions(+), 286 deletions(-)
diff --git a/drivers/net/e1000e/82571.c b/drivers/net/e1000e/82571.c
index bbc73ce..2b36af4 100644
--- a/drivers/net/e1000e/82571.c
+++ b/drivers/net/e1000e/82571.c
@@ -1,30 +1,30 @@
/*******************************************************************************
-
- Intel PRO/1000 Linux driver
- Copyright(c) 1999 - 2010 Intel Corporation.
-
- This program is free software; you can redistribute it and/or modify it
- under the terms and conditions of the GNU General Public License,
- version 2, as published by the Free Software Foundation.
-
- This program is distributed in the hope it will be useful, but WITHOUT
- ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- more details.
-
- You should have received a copy of the GNU General Public License along with
- this program; if not, write to the Free Software Foundation, Inc.,
- 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
-
- The full GNU General Public License is included in this distribution in
- the file called "COPYING".
-
- Contact Information:
- Linux NICS <linux.nics@intel.com>
- e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
- Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
-
-*******************************************************************************/
+ *
+ * Intel PRO/1000 Linux driver
+ * Copyright(c) 1999 - 2010 Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ * The full GNU General Public License is included in this distribution in
+ * the file called "COPYING".
+ *
+ * Contact Information:
+ * Linux NICS <linux.nics@intel.com>
+ * e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+ * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+ *
+ ******************************************************************************/
/*
* 82571EB Gigabit Ethernet Controller
diff --git a/drivers/net/e1000e/defines.h b/drivers/net/e1000e/defines.h
index f1260fc..4035598 100644
--- a/drivers/net/e1000e/defines.h
+++ b/drivers/net/e1000e/defines.h
@@ -1,30 +1,30 @@
/*******************************************************************************
-
- Intel PRO/1000 Linux driver
- Copyright(c) 1999 - 2010 Intel Corporation.
-
- This program is free software; you can redistribute it and/or modify it
- under the terms and conditions of the GNU General Public License,
- version 2, as published by the Free Software Foundation.
-
- This program is distributed in the hope it will be useful, but WITHOUT
- ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- more details.
-
- You should have received a copy of the GNU General Public License along with
- this program; if not, write to the Free Software Foundation, Inc.,
- 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
-
- The full GNU General Public License is included in this distribution in
- the file called "COPYING".
-
- Contact Information:
- Linux NICS <linux.nics@intel.com>
- e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
- Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
-
-*******************************************************************************/
+ *
+ * Intel PRO/1000 Linux driver
+ * Copyright(c) 1999 - 2010 Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. * See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ * The full GNU General Public License is included in this distribution in
+ * the file called "COPYING".
+ *
+ * Contact Information:
+ * Linux NICS <linux.nics@intel.com>
+ * e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+ * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+ *
+ ******************************************************************************/
#ifndef _E1000_DEFINES_H_
#define _E1000_DEFINES_H_
diff --git a/drivers/net/e1000e/e1000.h b/drivers/net/e1000e/e1000.h
index 97fa58a..f2bea0f 100644
--- a/drivers/net/e1000e/e1000.h
+++ b/drivers/net/e1000e/e1000.h
@@ -1,30 +1,30 @@
/*******************************************************************************
-
- Intel PRO/1000 Linux driver
- Copyright(c) 1999 - 2010 Intel Corporation.
-
- This program is free software; you can redistribute it and/or modify it
- under the terms and conditions of the GNU General Public License,
- version 2, as published by the Free Software Foundation.
-
- This program is distributed in the hope it will be useful, but WITHOUT
- ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- more details.
-
- You should have received a copy of the GNU General Public License along with
- this program; if not, write to the Free Software Foundation, Inc.,
- 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
-
- The full GNU General Public License is included in this distribution in
- the file called "COPYING".
-
- Contact Information:
- Linux NICS <linux.nics@intel.com>
- e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
- Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
-
-*******************************************************************************/
+ *
+ * Intel PRO/1000 Linux driver
+ * Copyright(c) 1999 - 2010 Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ * The full GNU General Public License is included in this distribution in
+ * the file called "COPYING".
+ *
+ * Contact Information:
+ * Linux NICS <linux.nics@intel.com>
+ * e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+ * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+ *
+ ******************************************************************************/
/* Linux PRO/1000 Ethernet Driver main header file */
diff --git a/drivers/net/e1000e/es2lan.c b/drivers/net/e1000e/es2lan.c
index 56a1321..3bc9df7 100644
--- a/drivers/net/e1000e/es2lan.c
+++ b/drivers/net/e1000e/es2lan.c
@@ -1,30 +1,30 @@
/*******************************************************************************
-
- Intel PRO/1000 Linux driver
- Copyright(c) 1999 - 2010 Intel Corporation.
-
- This program is free software; you can redistribute it and/or modify it
- under the terms and conditions of the GNU General Public License,
- version 2, as published by the Free Software Foundation.
-
- This program is distributed in the hope it will be useful, but WITHOUT
- ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- more details.
-
- You should have received a copy of the GNU General Public License along with
- this program; if not, write to the Free Software Foundation, Inc.,
- 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
-
- The full GNU General Public License is included in this distribution in
- the file called "COPYING".
-
- Contact Information:
- Linux NICS <linux.nics@intel.com>
- e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
- Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
-
-*******************************************************************************/
+ *
+ * Intel PRO/1000 Linux driver
+ * Copyright(c) 1999 - 2010 Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. * See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ * The full GNU General Public License is included in this distribution in
+ * the file called "COPYING".
+ *
+ * Contact Information:
+ * Linux NICS <linux.nics@intel.com>
+ * e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+ * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+ *
+ ******************************************************************************/
/*
* 80003ES2LAN Gigabit Ethernet Controller (Copper)
diff --git a/drivers/net/e1000e/ethtool.c b/drivers/net/e1000e/ethtool.c
index 4fee336..3096bbd 100644
--- a/drivers/net/e1000e/ethtool.c
+++ b/drivers/net/e1000e/ethtool.c
@@ -1,30 +1,30 @@
/*******************************************************************************
-
- Intel PRO/1000 Linux driver
- Copyright(c) 1999 - 2010 Intel Corporation.
-
- This program is free software; you can redistribute it and/or modify it
- under the terms and conditions of the GNU General Public License,
- version 2, as published by the Free Software Foundation.
-
- This program is distributed in the hope it will be useful, but WITHOUT
- ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- more details.
-
- You should have received a copy of the GNU General Public License along with
- this program; if not, write to the Free Software Foundation, Inc.,
- 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
-
- The full GNU General Public License is included in this distribution in
- the file called "COPYING".
-
- Contact Information:
- Linux NICS <linux.nics@intel.com>
- e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
- Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
-
-*******************************************************************************/
+ *
+ * Intel PRO/1000 Linux driver
+ * Copyright(c) 1999 - 2010 Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. * See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ * The full GNU General Public License is included in this distribution in
+ * the file called "COPYING".
+ *
+ * Contact Information:
+ * Linux NICS <linux.nics@intel.com>
+ * e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+ * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+ *
+ ******************************************************************************/
/* ethtool support for e1000 */
diff --git a/drivers/net/e1000e/hw.h b/drivers/net/e1000e/hw.h
index f009dd5..3911717 100644
--- a/drivers/net/e1000e/hw.h
+++ b/drivers/net/e1000e/hw.h
@@ -1,30 +1,30 @@
/*******************************************************************************
-
- Intel PRO/1000 Linux driver
- Copyright(c) 1999 - 2010 Intel Corporation.
-
- This program is free software; you can redistribute it and/or modify it
- under the terms and conditions of the GNU General Public License,
- version 2, as published by the Free Software Foundation.
-
- This program is distributed in the hope it will be useful, but WITHOUT
- ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- more details.
-
- You should have received a copy of the GNU General Public License along with
- this program; if not, write to the Free Software Foundation, Inc.,
- 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
-
- The full GNU General Public License is included in this distribution in
- the file called "COPYING".
-
- Contact Information:
- Linux NICS <linux.nics@intel.com>
- e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
- Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
-
-*******************************************************************************/
+ *
+ * Intel PRO/1000 Linux driver
+ * Copyright(c) 1999 - 2010 Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. * See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ * The full GNU General Public License is included in this distribution in
+ * the file called "COPYING".
+ *
+ * Contact Information:
+ * Linux NICS <linux.nics@intel.com>
+ * e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+ * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+ *
+ ******************************************************************************/
#ifndef _E1000_HW_H_
#define _E1000_HW_H_
diff --git a/drivers/net/e1000e/ich8lan.c b/drivers/net/e1000e/ich8lan.c
index a1dec6c..b90f5b1 100644
--- a/drivers/net/e1000e/ich8lan.c
+++ b/drivers/net/e1000e/ich8lan.c
@@ -1,30 +1,30 @@
/*******************************************************************************
-
- Intel PRO/1000 Linux driver
- Copyright(c) 1999 - 2010 Intel Corporation.
-
- This program is free software; you can redistribute it and/or modify it
- under the terms and conditions of the GNU General Public License,
- version 2, as published by the Free Software Foundation.
-
- This program is distributed in the hope it will be useful, but WITHOUT
- ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- more details.
-
- You should have received a copy of the GNU General Public License along with
- this program; if not, write to the Free Software Foundation, Inc.,
- 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
-
- The full GNU General Public License is included in this distribution in
- the file called "COPYING".
-
- Contact Information:
- Linux NICS <linux.nics@intel.com>
- e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
- Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
-
-*******************************************************************************/
+ *
+ * Intel PRO/1000 Linux driver
+ * Copyright(c) 1999 - 2010 Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. * See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ * The full GNU General Public License is included in this distribution in
+ * the file called "COPYING".
+ *
+ * Contact Information:
+ * Linux NICS <linux.nics@intel.com>
+ * e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+ * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+ *
+ ******************************************************************************/
/*
* 82562G 10/100 Network Connection
diff --git a/drivers/net/e1000e/lib.c b/drivers/net/e1000e/lib.c
index b950db3..5e85855 100644
--- a/drivers/net/e1000e/lib.c
+++ b/drivers/net/e1000e/lib.c
@@ -1,30 +1,30 @@
/*******************************************************************************
-
- Intel PRO/1000 Linux driver
- Copyright(c) 1999 - 2010 Intel Corporation.
-
- This program is free software; you can redistribute it and/or modify it
- under the terms and conditions of the GNU General Public License,
- version 2, as published by the Free Software Foundation.
-
- This program is distributed in the hope it will be useful, but WITHOUT
- ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- more details.
-
- You should have received a copy of the GNU General Public License along with
- this program; if not, write to the Free Software Foundation, Inc.,
- 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
-
- The full GNU General Public License is included in this distribution in
- the file called "COPYING".
-
- Contact Information:
- Linux NICS <linux.nics@intel.com>
- e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
- Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
-
-*******************************************************************************/
+ *
+ * Intel PRO/1000 Linux driver
+ * Copyright(c) 1999 - 2010 Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. * See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ * The full GNU General Public License is included in this distribution in
+ * the file called "COPYING".
+ *
+ * Contact Information:
+ * Linux NICS <linux.nics@intel.com>
+ * e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+ * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+ *
+ ******************************************************************************/
#include "e1000.h"
diff --git a/drivers/net/e1000e/netdev.c b/drivers/net/e1000e/netdev.c
index bdd3774..c0803cb 100644
--- a/drivers/net/e1000e/netdev.c
+++ b/drivers/net/e1000e/netdev.c
@@ -1,30 +1,30 @@
/*******************************************************************************
-
- Intel PRO/1000 Linux driver
- Copyright(c) 1999 - 2010 Intel Corporation.
-
- This program is free software; you can redistribute it and/or modify it
- under the terms and conditions of the GNU General Public License,
- version 2, as published by the Free Software Foundation.
-
- This program is distributed in the hope it will be useful, but WITHOUT
- ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- more details.
-
- You should have received a copy of the GNU General Public License along with
- this program; if not, write to the Free Software Foundation, Inc.,
- 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
-
- The full GNU General Public License is included in this distribution in
- the file called "COPYING".
-
- Contact Information:
- Linux NICS <linux.nics@intel.com>
- e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
- Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
-
-*******************************************************************************/
+ *
+ * Intel PRO/1000 Linux driver
+ * Copyright(c) 1999 - 2010 Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. * See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ * The full GNU General Public License is included in this distribution in
+ * the file called "COPYING".
+ *
+ * Contact Information:
+ * Linux NICS <linux.nics@intel.com>
+ * e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+ * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+ *
+ ******************************************************************************/
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
diff --git a/drivers/net/e1000e/param.c b/drivers/net/e1000e/param.c
index 992be2b..f069021 100644
--- a/drivers/net/e1000e/param.c
+++ b/drivers/net/e1000e/param.c
@@ -1,30 +1,30 @@
/*******************************************************************************
-
- Intel PRO/1000 Linux driver
- Copyright(c) 1999 - 2010 Intel Corporation.
-
- This program is free software; you can redistribute it and/or modify it
- under the terms and conditions of the GNU General Public License,
- version 2, as published by the Free Software Foundation.
-
- This program is distributed in the hope it will be useful, but WITHOUT
- ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- more details.
-
- You should have received a copy of the GNU General Public License along with
- this program; if not, write to the Free Software Foundation, Inc.,
- 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
-
- The full GNU General Public License is included in this distribution in
- the file called "COPYING".
-
- Contact Information:
- Linux NICS <linux.nics@intel.com>
- e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
- Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
-
-*******************************************************************************/
+ *
+ * Intel PRO/1000 Linux driver
+ * Copyright(c) 1999 - 2010 Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. * See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ * The full GNU General Public License is included in this distribution in
+ * the file called "COPYING".
+ *
+ * Contact Information:
+ * Linux NICS <linux.nics@intel.com>
+ * e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+ * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+ *
+ ******************************************************************************/
#include <linux/netdevice.h>
#include <linux/pci.h>
diff --git a/drivers/net/e1000e/phy.c b/drivers/net/e1000e/phy.c
index 23b1e48..45111c1 100644
--- a/drivers/net/e1000e/phy.c
+++ b/drivers/net/e1000e/phy.c
@@ -1,30 +1,30 @@
/*******************************************************************************
-
- Intel PRO/1000 Linux driver
- Copyright(c) 1999 - 2010 Intel Corporation.
-
- This program is free software; you can redistribute it and/or modify it
- under the terms and conditions of the GNU General Public License,
- version 2, as published by the Free Software Foundation.
-
- This program is distributed in the hope it will be useful, but WITHOUT
- ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- more details.
-
- You should have received a copy of the GNU General Public License along with
- this program; if not, write to the Free Software Foundation, Inc.,
- 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
-
- The full GNU General Public License is included in this distribution in
- the file called "COPYING".
-
- Contact Information:
- Linux NICS <linux.nics@intel.com>
- e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
- Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
-
-*******************************************************************************/
+ *
+ * Intel PRO/1000 Linux driver
+ * Copyright(c) 1999 - 2010 Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. * See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ * The full GNU General Public License is included in this distribution in
+ * the file called "COPYING".
+ *
+ * Contact Information:
+ * Linux NICS <linux.nics@intel.com>
+ * e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+ * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+ *
+ ******************************************************************************/
#include <linux/delay.h>
--
1.7.2.3
^ permalink raw reply related [flat|nested] 27+ messages in thread* [PATCH 7/7] e1000e: cleanup: fix copyright notices to preferred style
2010-12-09 2:40 [PATCH 0/7] e1000e: cleanup Asbjoern Sloth Toennesen
` (18 preceding siblings ...)
2010-12-09 2:40 ` [PATCH 7/7] e1000e: cleanup: fix copyright notices to preferred style Asbjoern Sloth Toennesen
@ 2010-12-09 2:40 ` Asbjoern Sloth Toennesen
2010-12-09 2:40 ` Asbjoern Sloth Toennesen
` (2 subsequent siblings)
22 siblings, 0 replies; 27+ messages in thread
From: Asbjoern Sloth Toennesen @ 2010-12-09 2:40 UTC (permalink / raw)
To: Jeff Kirsher, Jeff Kirsher; +Cc: e1000-devel, netdev, linux-kernel
Reformat the copyright notices in e1001e, to follow the preferred style
for multi-line comments, as outlined in Documentation/CodingStyle.
Prior to 0c73b4e, the current style generated an "Missing space after"
warning per line.
Signed-off-by: Asbjoern Sloth Toennesen <asbjorn@asbjorn.biz>
---
drivers/net/e1000e/82571.c | 52 +++++++++++++++++++++---------------------
drivers/net/e1000e/defines.h | 52 +++++++++++++++++++++---------------------
drivers/net/e1000e/e1000.h | 52 +++++++++++++++++++++---------------------
drivers/net/e1000e/es2lan.c | 52 +++++++++++++++++++++---------------------
drivers/net/e1000e/ethtool.c | 52 +++++++++++++++++++++---------------------
drivers/net/e1000e/hw.h | 52 +++++++++++++++++++++---------------------
drivers/net/e1000e/ich8lan.c | 52 +++++++++++++++++++++---------------------
drivers/net/e1000e/lib.c | 52 +++++++++++++++++++++---------------------
drivers/net/e1000e/netdev.c | 52 +++++++++++++++++++++---------------------
drivers/net/e1000e/param.c | 52 +++++++++++++++++++++---------------------
drivers/net/e1000e/phy.c | 52 +++++++++++++++++++++---------------------
11 files changed, 286 insertions(+), 286 deletions(-)
diff --git a/drivers/net/e1000e/82571.c b/drivers/net/e1000e/82571.c
index bbc73ce..2b36af4 100644
--- a/drivers/net/e1000e/82571.c
+++ b/drivers/net/e1000e/82571.c
@@ -1,30 +1,30 @@
/*******************************************************************************
-
- Intel PRO/1000 Linux driver
- Copyright(c) 1999 - 2010 Intel Corporation.
-
- This program is free software; you can redistribute it and/or modify it
- under the terms and conditions of the GNU General Public License,
- version 2, as published by the Free Software Foundation.
-
- This program is distributed in the hope it will be useful, but WITHOUT
- ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- more details.
-
- You should have received a copy of the GNU General Public License along with
- this program; if not, write to the Free Software Foundation, Inc.,
- 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
-
- The full GNU General Public License is included in this distribution in
- the file called "COPYING".
-
- Contact Information:
- Linux NICS <linux.nics@intel.com>
- e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
- Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
-
-*******************************************************************************/
+ *
+ * Intel PRO/1000 Linux driver
+ * Copyright(c) 1999 - 2010 Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ * The full GNU General Public License is included in this distribution in
+ * the file called "COPYING".
+ *
+ * Contact Information:
+ * Linux NICS <linux.nics@intel.com>
+ * e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+ * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+ *
+ ******************************************************************************/
/*
* 82571EB Gigabit Ethernet Controller
diff --git a/drivers/net/e1000e/defines.h b/drivers/net/e1000e/defines.h
index f1260fc..4035598 100644
--- a/drivers/net/e1000e/defines.h
+++ b/drivers/net/e1000e/defines.h
@@ -1,30 +1,30 @@
/*******************************************************************************
-
- Intel PRO/1000 Linux driver
- Copyright(c) 1999 - 2010 Intel Corporation.
-
- This program is free software; you can redistribute it and/or modify it
- under the terms and conditions of the GNU General Public License,
- version 2, as published by the Free Software Foundation.
-
- This program is distributed in the hope it will be useful, but WITHOUT
- ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- more details.
-
- You should have received a copy of the GNU General Public License along with
- this program; if not, write to the Free Software Foundation, Inc.,
- 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
-
- The full GNU General Public License is included in this distribution in
- the file called "COPYING".
-
- Contact Information:
- Linux NICS <linux.nics@intel.com>
- e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
- Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
-
-*******************************************************************************/
+ *
+ * Intel PRO/1000 Linux driver
+ * Copyright(c) 1999 - 2010 Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. * See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ * The full GNU General Public License is included in this distribution in
+ * the file called "COPYING".
+ *
+ * Contact Information:
+ * Linux NICS <linux.nics@intel.com>
+ * e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+ * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+ *
+ ******************************************************************************/
#ifndef _E1000_DEFINES_H_
#define _E1000_DEFINES_H_
diff --git a/drivers/net/e1000e/e1000.h b/drivers/net/e1000e/e1000.h
index 97fa58a..f2bea0f 100644
--- a/drivers/net/e1000e/e1000.h
+++ b/drivers/net/e1000e/e1000.h
@@ -1,30 +1,30 @@
/*******************************************************************************
-
- Intel PRO/1000 Linux driver
- Copyright(c) 1999 - 2010 Intel Corporation.
-
- This program is free software; you can redistribute it and/or modify it
- under the terms and conditions of the GNU General Public License,
- version 2, as published by the Free Software Foundation.
-
- This program is distributed in the hope it will be useful, but WITHOUT
- ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- more details.
-
- You should have received a copy of the GNU General Public License along with
- this program; if not, write to the Free Software Foundation, Inc.,
- 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
-
- The full GNU General Public License is included in this distribution in
- the file called "COPYING".
-
- Contact Information:
- Linux NICS <linux.nics@intel.com>
- e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
- Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
-
-*******************************************************************************/
+ *
+ * Intel PRO/1000 Linux driver
+ * Copyright(c) 1999 - 2010 Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ * The full GNU General Public License is included in this distribution in
+ * the file called "COPYING".
+ *
+ * Contact Information:
+ * Linux NICS <linux.nics@intel.com>
+ * e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+ * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+ *
+ ******************************************************************************/
/* Linux PRO/1000 Ethernet Driver main header file */
diff --git a/drivers/net/e1000e/es2lan.c b/drivers/net/e1000e/es2lan.c
index 56a1321..3bc9df7 100644
--- a/drivers/net/e1000e/es2lan.c
+++ b/drivers/net/e1000e/es2lan.c
@@ -1,30 +1,30 @@
/*******************************************************************************
-
- Intel PRO/1000 Linux driver
- Copyright(c) 1999 - 2010 Intel Corporation.
-
- This program is free software; you can redistribute it and/or modify it
- under the terms and conditions of the GNU General Public License,
- version 2, as published by the Free Software Foundation.
-
- This program is distributed in the hope it will be useful, but WITHOUT
- ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- more details.
-
- You should have received a copy of the GNU General Public License along with
- this program; if not, write to the Free Software Foundation, Inc.,
- 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
-
- The full GNU General Public License is included in this distribution in
- the file called "COPYING".
-
- Contact Information:
- Linux NICS <linux.nics@intel.com>
- e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
- Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
-
-*******************************************************************************/
+ *
+ * Intel PRO/1000 Linux driver
+ * Copyright(c) 1999 - 2010 Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. * See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ * The full GNU General Public License is included in this distribution in
+ * the file called "COPYING".
+ *
+ * Contact Information:
+ * Linux NICS <linux.nics@intel.com>
+ * e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+ * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+ *
+ ******************************************************************************/
/*
* 80003ES2LAN Gigabit Ethernet Controller (Copper)
diff --git a/drivers/net/e1000e/ethtool.c b/drivers/net/e1000e/ethtool.c
index 4fee336..3096bbd 100644
--- a/drivers/net/e1000e/ethtool.c
+++ b/drivers/net/e1000e/ethtool.c
@@ -1,30 +1,30 @@
/*******************************************************************************
-
- Intel PRO/1000 Linux driver
- Copyright(c) 1999 - 2010 Intel Corporation.
-
- This program is free software; you can redistribute it and/or modify it
- under the terms and conditions of the GNU General Public License,
- version 2, as published by the Free Software Foundation.
-
- This program is distributed in the hope it will be useful, but WITHOUT
- ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- more details.
-
- You should have received a copy of the GNU General Public License along with
- this program; if not, write to the Free Software Foundation, Inc.,
- 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
-
- The full GNU General Public License is included in this distribution in
- the file called "COPYING".
-
- Contact Information:
- Linux NICS <linux.nics@intel.com>
- e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
- Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
-
-*******************************************************************************/
+ *
+ * Intel PRO/1000 Linux driver
+ * Copyright(c) 1999 - 2010 Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. * See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ * The full GNU General Public License is included in this distribution in
+ * the file called "COPYING".
+ *
+ * Contact Information:
+ * Linux NICS <linux.nics@intel.com>
+ * e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+ * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+ *
+ ******************************************************************************/
/* ethtool support for e1000 */
diff --git a/drivers/net/e1000e/hw.h b/drivers/net/e1000e/hw.h
index f009dd5..3911717 100644
--- a/drivers/net/e1000e/hw.h
+++ b/drivers/net/e1000e/hw.h
@@ -1,30 +1,30 @@
/*******************************************************************************
-
- Intel PRO/1000 Linux driver
- Copyright(c) 1999 - 2010 Intel Corporation.
-
- This program is free software; you can redistribute it and/or modify it
- under the terms and conditions of the GNU General Public License,
- version 2, as published by the Free Software Foundation.
-
- This program is distributed in the hope it will be useful, but WITHOUT
- ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- more details.
-
- You should have received a copy of the GNU General Public License along with
- this program; if not, write to the Free Software Foundation, Inc.,
- 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
-
- The full GNU General Public License is included in this distribution in
- the file called "COPYING".
-
- Contact Information:
- Linux NICS <linux.nics@intel.com>
- e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
- Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
-
-*******************************************************************************/
+ *
+ * Intel PRO/1000 Linux driver
+ * Copyright(c) 1999 - 2010 Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. * See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ * The full GNU General Public License is included in this distribution in
+ * the file called "COPYING".
+ *
+ * Contact Information:
+ * Linux NICS <linux.nics@intel.com>
+ * e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+ * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+ *
+ ******************************************************************************/
#ifndef _E1000_HW_H_
#define _E1000_HW_H_
diff --git a/drivers/net/e1000e/ich8lan.c b/drivers/net/e1000e/ich8lan.c
index a1dec6c..b90f5b1 100644
--- a/drivers/net/e1000e/ich8lan.c
+++ b/drivers/net/e1000e/ich8lan.c
@@ -1,30 +1,30 @@
/*******************************************************************************
-
- Intel PRO/1000 Linux driver
- Copyright(c) 1999 - 2010 Intel Corporation.
-
- This program is free software; you can redistribute it and/or modify it
- under the terms and conditions of the GNU General Public License,
- version 2, as published by the Free Software Foundation.
-
- This program is distributed in the hope it will be useful, but WITHOUT
- ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- more details.
-
- You should have received a copy of the GNU General Public License along with
- this program; if not, write to the Free Software Foundation, Inc.,
- 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
-
- The full GNU General Public License is included in this distribution in
- the file called "COPYING".
-
- Contact Information:
- Linux NICS <linux.nics@intel.com>
- e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
- Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
-
-*******************************************************************************/
+ *
+ * Intel PRO/1000 Linux driver
+ * Copyright(c) 1999 - 2010 Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. * See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ * The full GNU General Public License is included in this distribution in
+ * the file called "COPYING".
+ *
+ * Contact Information:
+ * Linux NICS <linux.nics@intel.com>
+ * e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+ * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+ *
+ ******************************************************************************/
/*
* 82562G 10/100 Network Connection
diff --git a/drivers/net/e1000e/lib.c b/drivers/net/e1000e/lib.c
index b950db3..5e85855 100644
--- a/drivers/net/e1000e/lib.c
+++ b/drivers/net/e1000e/lib.c
@@ -1,30 +1,30 @@
/*******************************************************************************
-
- Intel PRO/1000 Linux driver
- Copyright(c) 1999 - 2010 Intel Corporation.
-
- This program is free software; you can redistribute it and/or modify it
- under the terms and conditions of the GNU General Public License,
- version 2, as published by the Free Software Foundation.
-
- This program is distributed in the hope it will be useful, but WITHOUT
- ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- more details.
-
- You should have received a copy of the GNU General Public License along with
- this program; if not, write to the Free Software Foundation, Inc.,
- 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
-
- The full GNU General Public License is included in this distribution in
- the file called "COPYING".
-
- Contact Information:
- Linux NICS <linux.nics@intel.com>
- e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
- Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
-
-*******************************************************************************/
+ *
+ * Intel PRO/1000 Linux driver
+ * Copyright(c) 1999 - 2010 Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. * See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ * The full GNU General Public License is included in this distribution in
+ * the file called "COPYING".
+ *
+ * Contact Information:
+ * Linux NICS <linux.nics@intel.com>
+ * e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+ * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+ *
+ ******************************************************************************/
#include "e1000.h"
diff --git a/drivers/net/e1000e/netdev.c b/drivers/net/e1000e/netdev.c
index bdd3774..c0803cb 100644
--- a/drivers/net/e1000e/netdev.c
+++ b/drivers/net/e1000e/netdev.c
@@ -1,30 +1,30 @@
/*******************************************************************************
-
- Intel PRO/1000 Linux driver
- Copyright(c) 1999 - 2010 Intel Corporation.
-
- This program is free software; you can redistribute it and/or modify it
- under the terms and conditions of the GNU General Public License,
- version 2, as published by the Free Software Foundation.
-
- This program is distributed in the hope it will be useful, but WITHOUT
- ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- more details.
-
- You should have received a copy of the GNU General Public License along with
- this program; if not, write to the Free Software Foundation, Inc.,
- 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
-
- The full GNU General Public License is included in this distribution in
- the file called "COPYING".
-
- Contact Information:
- Linux NICS <linux.nics@intel.com>
- e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
- Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
-
-*******************************************************************************/
+ *
+ * Intel PRO/1000 Linux driver
+ * Copyright(c) 1999 - 2010 Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. * See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ * The full GNU General Public License is included in this distribution in
+ * the file called "COPYING".
+ *
+ * Contact Information:
+ * Linux NICS <linux.nics@intel.com>
+ * e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+ * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+ *
+ ******************************************************************************/
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
diff --git a/drivers/net/e1000e/param.c b/drivers/net/e1000e/param.c
index 992be2b..f069021 100644
--- a/drivers/net/e1000e/param.c
+++ b/drivers/net/e1000e/param.c
@@ -1,30 +1,30 @@
/*******************************************************************************
-
- Intel PRO/1000 Linux driver
- Copyright(c) 1999 - 2010 Intel Corporation.
-
- This program is free software; you can redistribute it and/or modify it
- under the terms and conditions of the GNU General Public License,
- version 2, as published by the Free Software Foundation.
-
- This program is distributed in the hope it will be useful, but WITHOUT
- ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- more details.
-
- You should have received a copy of the GNU General Public License along with
- this program; if not, write to the Free Software Foundation, Inc.,
- 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
-
- The full GNU General Public License is included in this distribution in
- the file called "COPYING".
-
- Contact Information:
- Linux NICS <linux.nics@intel.com>
- e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
- Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
-
-*******************************************************************************/
+ *
+ * Intel PRO/1000 Linux driver
+ * Copyright(c) 1999 - 2010 Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. * See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ * The full GNU General Public License is included in this distribution in
+ * the file called "COPYING".
+ *
+ * Contact Information:
+ * Linux NICS <linux.nics@intel.com>
+ * e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+ * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+ *
+ ******************************************************************************/
#include <linux/netdevice.h>
#include <linux/pci.h>
diff --git a/drivers/net/e1000e/phy.c b/drivers/net/e1000e/phy.c
index 23b1e48..45111c1 100644
--- a/drivers/net/e1000e/phy.c
+++ b/drivers/net/e1000e/phy.c
@@ -1,30 +1,30 @@
/*******************************************************************************
-
- Intel PRO/1000 Linux driver
- Copyright(c) 1999 - 2010 Intel Corporation.
-
- This program is free software; you can redistribute it and/or modify it
- under the terms and conditions of the GNU General Public License,
- version 2, as published by the Free Software Foundation.
-
- This program is distributed in the hope it will be useful, but WITHOUT
- ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- more details.
-
- You should have received a copy of the GNU General Public License along with
- this program; if not, write to the Free Software Foundation, Inc.,
- 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
-
- The full GNU General Public License is included in this distribution in
- the file called "COPYING".
-
- Contact Information:
- Linux NICS <linux.nics@intel.com>
- e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
- Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
-
-*******************************************************************************/
+ *
+ * Intel PRO/1000 Linux driver
+ * Copyright(c) 1999 - 2010 Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. * See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ * The full GNU General Public License is included in this distribution in
+ * the file called "COPYING".
+ *
+ * Contact Information:
+ * Linux NICS <linux.nics@intel.com>
+ * e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+ * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+ *
+ ******************************************************************************/
#include <linux/delay.h>
--
1.7.2.3
------------------------------------------------------------------------------
This SF Dev2Dev email is sponsored by:
WikiLeaks The End of the Free Internet
http://p.sf.net/sfu/therealnews-com
_______________________________________________
E1000-devel mailing list
E1000-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/e1000-devel
To learn more about Intel® Ethernet, visit http://communities.intel.com/community/wired
^ permalink raw reply related [flat|nested] 27+ messages in thread* [PATCH 7/7] e1000e: cleanup: fix copyright notices to preferred style
2010-12-09 2:40 [PATCH 0/7] e1000e: cleanup Asbjoern Sloth Toennesen
` (19 preceding siblings ...)
2010-12-09 2:40 ` Asbjoern Sloth Toennesen
@ 2010-12-09 2:40 ` Asbjoern Sloth Toennesen
2010-12-09 3:37 ` [PATCH 0/7] e1000e: cleanup Stephen Hemminger
2010-12-10 5:20 ` Kirsher, Jeffrey T
22 siblings, 0 replies; 27+ messages in thread
From: Asbjoern Sloth Toennesen @ 2010-12-09 2:40 UTC (permalink / raw)
To: Jeff Kirsher, Jeff Kirsher; +Cc: e1000-devel, netdev, linux-kernel
Reformat the copyright notices in e1001e, to follow the preferred style
for multi-line comments, as outlined in Documentation/CodingStyle.
Prior to 0c73b4e, the current style generated an "Missing space after"
warning per line.
Signed-off-by: Asbjoern Sloth Toennesen <asbjorn@asbjorn.biz>
---
drivers/net/e1000e/82571.c | 52 +++++++++++++++++++++---------------------
drivers/net/e1000e/defines.h | 52 +++++++++++++++++++++---------------------
drivers/net/e1000e/e1000.h | 52 +++++++++++++++++++++---------------------
drivers/net/e1000e/es2lan.c | 52 +++++++++++++++++++++---------------------
drivers/net/e1000e/ethtool.c | 52 +++++++++++++++++++++---------------------
drivers/net/e1000e/hw.h | 52 +++++++++++++++++++++---------------------
drivers/net/e1000e/ich8lan.c | 52 +++++++++++++++++++++---------------------
drivers/net/e1000e/lib.c | 52 +++++++++++++++++++++---------------------
drivers/net/e1000e/netdev.c | 52 +++++++++++++++++++++---------------------
drivers/net/e1000e/param.c | 52 +++++++++++++++++++++---------------------
drivers/net/e1000e/phy.c | 52 +++++++++++++++++++++---------------------
11 files changed, 286 insertions(+), 286 deletions(-)
diff --git a/drivers/net/e1000e/82571.c b/drivers/net/e1000e/82571.c
index bbc73ce..2b36af4 100644
--- a/drivers/net/e1000e/82571.c
+++ b/drivers/net/e1000e/82571.c
@@ -1,30 +1,30 @@
/*******************************************************************************
-
- Intel PRO/1000 Linux driver
- Copyright(c) 1999 - 2010 Intel Corporation.
-
- This program is free software; you can redistribute it and/or modify it
- under the terms and conditions of the GNU General Public License,
- version 2, as published by the Free Software Foundation.
-
- This program is distributed in the hope it will be useful, but WITHOUT
- ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- more details.
-
- You should have received a copy of the GNU General Public License along with
- this program; if not, write to the Free Software Foundation, Inc.,
- 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
-
- The full GNU General Public License is included in this distribution in
- the file called "COPYING".
-
- Contact Information:
- Linux NICS <linux.nics@intel.com>
- e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
- Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
-
-*******************************************************************************/
+ *
+ * Intel PRO/1000 Linux driver
+ * Copyright(c) 1999 - 2010 Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ * The full GNU General Public License is included in this distribution in
+ * the file called "COPYING".
+ *
+ * Contact Information:
+ * Linux NICS <linux.nics@intel.com>
+ * e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+ * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+ *
+ ******************************************************************************/
/*
* 82571EB Gigabit Ethernet Controller
diff --git a/drivers/net/e1000e/defines.h b/drivers/net/e1000e/defines.h
index f1260fc..4035598 100644
--- a/drivers/net/e1000e/defines.h
+++ b/drivers/net/e1000e/defines.h
@@ -1,30 +1,30 @@
/*******************************************************************************
-
- Intel PRO/1000 Linux driver
- Copyright(c) 1999 - 2010 Intel Corporation.
-
- This program is free software; you can redistribute it and/or modify it
- under the terms and conditions of the GNU General Public License,
- version 2, as published by the Free Software Foundation.
-
- This program is distributed in the hope it will be useful, but WITHOUT
- ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- more details.
-
- You should have received a copy of the GNU General Public License along with
- this program; if not, write to the Free Software Foundation, Inc.,
- 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
-
- The full GNU General Public License is included in this distribution in
- the file called "COPYING".
-
- Contact Information:
- Linux NICS <linux.nics@intel.com>
- e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
- Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
-
-*******************************************************************************/
+ *
+ * Intel PRO/1000 Linux driver
+ * Copyright(c) 1999 - 2010 Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. * See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ * The full GNU General Public License is included in this distribution in
+ * the file called "COPYING".
+ *
+ * Contact Information:
+ * Linux NICS <linux.nics@intel.com>
+ * e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+ * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+ *
+ ******************************************************************************/
#ifndef _E1000_DEFINES_H_
#define _E1000_DEFINES_H_
diff --git a/drivers/net/e1000e/e1000.h b/drivers/net/e1000e/e1000.h
index 97fa58a..f2bea0f 100644
--- a/drivers/net/e1000e/e1000.h
+++ b/drivers/net/e1000e/e1000.h
@@ -1,30 +1,30 @@
/*******************************************************************************
-
- Intel PRO/1000 Linux driver
- Copyright(c) 1999 - 2010 Intel Corporation.
-
- This program is free software; you can redistribute it and/or modify it
- under the terms and conditions of the GNU General Public License,
- version 2, as published by the Free Software Foundation.
-
- This program is distributed in the hope it will be useful, but WITHOUT
- ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- more details.
-
- You should have received a copy of the GNU General Public License along with
- this program; if not, write to the Free Software Foundation, Inc.,
- 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
-
- The full GNU General Public License is included in this distribution in
- the file called "COPYING".
-
- Contact Information:
- Linux NICS <linux.nics@intel.com>
- e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
- Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
-
-*******************************************************************************/
+ *
+ * Intel PRO/1000 Linux driver
+ * Copyright(c) 1999 - 2010 Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ * The full GNU General Public License is included in this distribution in
+ * the file called "COPYING".
+ *
+ * Contact Information:
+ * Linux NICS <linux.nics@intel.com>
+ * e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+ * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+ *
+ ******************************************************************************/
/* Linux PRO/1000 Ethernet Driver main header file */
diff --git a/drivers/net/e1000e/es2lan.c b/drivers/net/e1000e/es2lan.c
index 56a1321..3bc9df7 100644
--- a/drivers/net/e1000e/es2lan.c
+++ b/drivers/net/e1000e/es2lan.c
@@ -1,30 +1,30 @@
/*******************************************************************************
-
- Intel PRO/1000 Linux driver
- Copyright(c) 1999 - 2010 Intel Corporation.
-
- This program is free software; you can redistribute it and/or modify it
- under the terms and conditions of the GNU General Public License,
- version 2, as published by the Free Software Foundation.
-
- This program is distributed in the hope it will be useful, but WITHOUT
- ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- more details.
-
- You should have received a copy of the GNU General Public License along with
- this program; if not, write to the Free Software Foundation, Inc.,
- 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
-
- The full GNU General Public License is included in this distribution in
- the file called "COPYING".
-
- Contact Information:
- Linux NICS <linux.nics@intel.com>
- e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
- Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
-
-*******************************************************************************/
+ *
+ * Intel PRO/1000 Linux driver
+ * Copyright(c) 1999 - 2010 Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. * See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ * The full GNU General Public License is included in this distribution in
+ * the file called "COPYING".
+ *
+ * Contact Information:
+ * Linux NICS <linux.nics@intel.com>
+ * e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+ * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+ *
+ ******************************************************************************/
/*
* 80003ES2LAN Gigabit Ethernet Controller (Copper)
diff --git a/drivers/net/e1000e/ethtool.c b/drivers/net/e1000e/ethtool.c
index 4fee336..3096bbd 100644
--- a/drivers/net/e1000e/ethtool.c
+++ b/drivers/net/e1000e/ethtool.c
@@ -1,30 +1,30 @@
/*******************************************************************************
-
- Intel PRO/1000 Linux driver
- Copyright(c) 1999 - 2010 Intel Corporation.
-
- This program is free software; you can redistribute it and/or modify it
- under the terms and conditions of the GNU General Public License,
- version 2, as published by the Free Software Foundation.
-
- This program is distributed in the hope it will be useful, but WITHOUT
- ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- more details.
-
- You should have received a copy of the GNU General Public License along with
- this program; if not, write to the Free Software Foundation, Inc.,
- 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
-
- The full GNU General Public License is included in this distribution in
- the file called "COPYING".
-
- Contact Information:
- Linux NICS <linux.nics@intel.com>
- e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
- Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
-
-*******************************************************************************/
+ *
+ * Intel PRO/1000 Linux driver
+ * Copyright(c) 1999 - 2010 Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. * See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ * The full GNU General Public License is included in this distribution in
+ * the file called "COPYING".
+ *
+ * Contact Information:
+ * Linux NICS <linux.nics@intel.com>
+ * e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+ * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+ *
+ ******************************************************************************/
/* ethtool support for e1000 */
diff --git a/drivers/net/e1000e/hw.h b/drivers/net/e1000e/hw.h
index f009dd5..3911717 100644
--- a/drivers/net/e1000e/hw.h
+++ b/drivers/net/e1000e/hw.h
@@ -1,30 +1,30 @@
/*******************************************************************************
-
- Intel PRO/1000 Linux driver
- Copyright(c) 1999 - 2010 Intel Corporation.
-
- This program is free software; you can redistribute it and/or modify it
- under the terms and conditions of the GNU General Public License,
- version 2, as published by the Free Software Foundation.
-
- This program is distributed in the hope it will be useful, but WITHOUT
- ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- more details.
-
- You should have received a copy of the GNU General Public License along with
- this program; if not, write to the Free Software Foundation, Inc.,
- 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
-
- The full GNU General Public License is included in this distribution in
- the file called "COPYING".
-
- Contact Information:
- Linux NICS <linux.nics@intel.com>
- e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
- Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
-
-*******************************************************************************/
+ *
+ * Intel PRO/1000 Linux driver
+ * Copyright(c) 1999 - 2010 Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. * See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ * The full GNU General Public License is included in this distribution in
+ * the file called "COPYING".
+ *
+ * Contact Information:
+ * Linux NICS <linux.nics@intel.com>
+ * e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+ * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+ *
+ ******************************************************************************/
#ifndef _E1000_HW_H_
#define _E1000_HW_H_
diff --git a/drivers/net/e1000e/ich8lan.c b/drivers/net/e1000e/ich8lan.c
index a1dec6c..b90f5b1 100644
--- a/drivers/net/e1000e/ich8lan.c
+++ b/drivers/net/e1000e/ich8lan.c
@@ -1,30 +1,30 @@
/*******************************************************************************
-
- Intel PRO/1000 Linux driver
- Copyright(c) 1999 - 2010 Intel Corporation.
-
- This program is free software; you can redistribute it and/or modify it
- under the terms and conditions of the GNU General Public License,
- version 2, as published by the Free Software Foundation.
-
- This program is distributed in the hope it will be useful, but WITHOUT
- ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- more details.
-
- You should have received a copy of the GNU General Public License along with
- this program; if not, write to the Free Software Foundation, Inc.,
- 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
-
- The full GNU General Public License is included in this distribution in
- the file called "COPYING".
-
- Contact Information:
- Linux NICS <linux.nics@intel.com>
- e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
- Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
-
-*******************************************************************************/
+ *
+ * Intel PRO/1000 Linux driver
+ * Copyright(c) 1999 - 2010 Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. * See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ * The full GNU General Public License is included in this distribution in
+ * the file called "COPYING".
+ *
+ * Contact Information:
+ * Linux NICS <linux.nics@intel.com>
+ * e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+ * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+ *
+ ******************************************************************************/
/*
* 82562G 10/100 Network Connection
diff --git a/drivers/net/e1000e/lib.c b/drivers/net/e1000e/lib.c
index b950db3..5e85855 100644
--- a/drivers/net/e1000e/lib.c
+++ b/drivers/net/e1000e/lib.c
@@ -1,30 +1,30 @@
/*******************************************************************************
-
- Intel PRO/1000 Linux driver
- Copyright(c) 1999 - 2010 Intel Corporation.
-
- This program is free software; you can redistribute it and/or modify it
- under the terms and conditions of the GNU General Public License,
- version 2, as published by the Free Software Foundation.
-
- This program is distributed in the hope it will be useful, but WITHOUT
- ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- more details.
-
- You should have received a copy of the GNU General Public License along with
- this program; if not, write to the Free Software Foundation, Inc.,
- 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
-
- The full GNU General Public License is included in this distribution in
- the file called "COPYING".
-
- Contact Information:
- Linux NICS <linux.nics@intel.com>
- e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
- Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
-
-*******************************************************************************/
+ *
+ * Intel PRO/1000 Linux driver
+ * Copyright(c) 1999 - 2010 Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. * See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ * The full GNU General Public License is included in this distribution in
+ * the file called "COPYING".
+ *
+ * Contact Information:
+ * Linux NICS <linux.nics@intel.com>
+ * e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+ * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+ *
+ ******************************************************************************/
#include "e1000.h"
diff --git a/drivers/net/e1000e/netdev.c b/drivers/net/e1000e/netdev.c
index bdd3774..c0803cb 100644
--- a/drivers/net/e1000e/netdev.c
+++ b/drivers/net/e1000e/netdev.c
@@ -1,30 +1,30 @@
/*******************************************************************************
-
- Intel PRO/1000 Linux driver
- Copyright(c) 1999 - 2010 Intel Corporation.
-
- This program is free software; you can redistribute it and/or modify it
- under the terms and conditions of the GNU General Public License,
- version 2, as published by the Free Software Foundation.
-
- This program is distributed in the hope it will be useful, but WITHOUT
- ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- more details.
-
- You should have received a copy of the GNU General Public License along with
- this program; if not, write to the Free Software Foundation, Inc.,
- 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
-
- The full GNU General Public License is included in this distribution in
- the file called "COPYING".
-
- Contact Information:
- Linux NICS <linux.nics@intel.com>
- e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
- Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
-
-*******************************************************************************/
+ *
+ * Intel PRO/1000 Linux driver
+ * Copyright(c) 1999 - 2010 Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. * See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ * The full GNU General Public License is included in this distribution in
+ * the file called "COPYING".
+ *
+ * Contact Information:
+ * Linux NICS <linux.nics@intel.com>
+ * e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+ * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+ *
+ ******************************************************************************/
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
diff --git a/drivers/net/e1000e/param.c b/drivers/net/e1000e/param.c
index 992be2b..f069021 100644
--- a/drivers/net/e1000e/param.c
+++ b/drivers/net/e1000e/param.c
@@ -1,30 +1,30 @@
/*******************************************************************************
-
- Intel PRO/1000 Linux driver
- Copyright(c) 1999 - 2010 Intel Corporation.
-
- This program is free software; you can redistribute it and/or modify it
- under the terms and conditions of the GNU General Public License,
- version 2, as published by the Free Software Foundation.
-
- This program is distributed in the hope it will be useful, but WITHOUT
- ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- more details.
-
- You should have received a copy of the GNU General Public License along with
- this program; if not, write to the Free Software Foundation, Inc.,
- 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
-
- The full GNU General Public License is included in this distribution in
- the file called "COPYING".
-
- Contact Information:
- Linux NICS <linux.nics@intel.com>
- e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
- Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
-
-*******************************************************************************/
+ *
+ * Intel PRO/1000 Linux driver
+ * Copyright(c) 1999 - 2010 Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. * See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ * The full GNU General Public License is included in this distribution in
+ * the file called "COPYING".
+ *
+ * Contact Information:
+ * Linux NICS <linux.nics@intel.com>
+ * e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+ * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+ *
+ ******************************************************************************/
#include <linux/netdevice.h>
#include <linux/pci.h>
diff --git a/drivers/net/e1000e/phy.c b/drivers/net/e1000e/phy.c
index 23b1e48..45111c1 100644
--- a/drivers/net/e1000e/phy.c
+++ b/drivers/net/e1000e/phy.c
@@ -1,30 +1,30 @@
/*******************************************************************************
-
- Intel PRO/1000 Linux driver
- Copyright(c) 1999 - 2010 Intel Corporation.
-
- This program is free software; you can redistribute it and/or modify it
- under the terms and conditions of the GNU General Public License,
- version 2, as published by the Free Software Foundation.
-
- This program is distributed in the hope it will be useful, but WITHOUT
- ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- more details.
-
- You should have received a copy of the GNU General Public License along with
- this program; if not, write to the Free Software Foundation, Inc.,
- 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
-
- The full GNU General Public License is included in this distribution in
- the file called "COPYING".
-
- Contact Information:
- Linux NICS <linux.nics@intel.com>
- e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
- Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
-
-*******************************************************************************/
+ *
+ * Intel PRO/1000 Linux driver
+ * Copyright(c) 1999 - 2010 Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. * See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ * The full GNU General Public License is included in this distribution in
+ * the file called "COPYING".
+ *
+ * Contact Information:
+ * Linux NICS <linux.nics@intel.com>
+ * e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+ * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+ *
+ ******************************************************************************/
#include <linux/delay.h>
--
1.7.2.3
^ permalink raw reply related [flat|nested] 27+ messages in thread* Re: [PATCH 0/7] e1000e: cleanup
2010-12-09 2:40 [PATCH 0/7] e1000e: cleanup Asbjoern Sloth Toennesen
` (20 preceding siblings ...)
2010-12-09 2:40 ` Asbjoern Sloth Toennesen
@ 2010-12-09 3:37 ` Stephen Hemminger
2010-12-10 5:20 ` Kirsher, Jeffrey T
22 siblings, 0 replies; 27+ messages in thread
From: Stephen Hemminger @ 2010-12-09 3:37 UTC (permalink / raw)
To: Asbjoern Sloth Toennesen; +Cc: Jeff Kirsher, e1000-devel, netdev, linux-kernel
On Thu, 9 Dec 2010 02:40:50 +0000
Asbjoern Sloth Toennesen <asbjorn@asbjorn.biz> wrote:
> Hi,
>
> This patchset fixes most checkstyle problems in e1000e.
>
> Checkpatch summary:
> pre: total: 221 errors, 129 warnings, 24520 lines checked
> post: total: 2 errors, 34 warnings, 24533 lines checked
IMHO these patches are in the why bother category, they deal only
with whitespace and things that checkpatch is too stupid to understand.
Checkpatch is a rough saw only appropriate to doing initial cutting
through crap drivers.
^ permalink raw reply [flat|nested] 27+ messages in thread* Re: [PATCH 0/7] e1000e: cleanup
2010-12-09 2:40 [PATCH 0/7] e1000e: cleanup Asbjoern Sloth Toennesen
` (21 preceding siblings ...)
2010-12-09 3:37 ` [PATCH 0/7] e1000e: cleanup Stephen Hemminger
@ 2010-12-10 5:20 ` Kirsher, Jeffrey T
22 siblings, 0 replies; 27+ messages in thread
From: Kirsher, Jeffrey T @ 2010-12-10 5:20 UTC (permalink / raw)
To: asbjorn@asbjorn.biz
Cc: e1000-devel@lists.sourceforge.net, netdev@vger.kernel.org,
linux-kernel@vger.kernel.org
[-- Attachment #1: Type: text/plain, Size: 2270 bytes --]
On Thu, 2010-12-09 at 02:40 +0000, Asbjoern Sloth Toennesen wrote:
> Hi,
>
> This patchset fixes most checkstyle problems in e1000e.
>
> Checkpatch summary:
> pre: total: 221 errors, 129 warnings, 24520 lines checked
> post: total: 2 errors, 34 warnings, 24533 lines checked
>
> The two remaining errors are of the type "Macros with complex values
> should be enclosed in parenthesis", with macros containing 3 comma
> seperated values.
>
> The remaining warnings are all caused by <20ms msleep usage, that should
> be replaced with usleep_range calls.
>
> This patchset is based on top of jkirsher/net-next-2.6.git (67d5288)
>
> Asbjoern Sloth Toennesen (7):
> e1000e: cleanup: fix spacing issues
> e1000e: cleanup: fix bracket issues
> e1000e: cleanup: simplify E1000_ALL_* defines
> e1000e: cleanup: fix long lines
> e1000e: cleanup: fix space issues in ich8_* structs
> e1000e: cleanup: swap arguments to avoid checkpatch errors
> e1000e: cleanup: fix copyright notices to preferred style
>
> drivers/net/e1000e/82571.c | 70 +++++++-------
> drivers/net/e1000e/defines.h | 110 ++++++++++++-----------
> drivers/net/e1000e/e1000.h | 93 +++++++++++---------
> drivers/net/e1000e/es2lan.c | 135 ++++++++++++++--------------
> drivers/net/e1000e/ethtool.c | 75 ++++++++--------
> drivers/net/e1000e/hw.h | 56 ++++++------
> drivers/net/e1000e/ich8lan.c | 185 +++++++++++++++++++-------------------
> drivers/net/e1000e/lib.c | 78 ++++++++--------
> drivers/net/e1000e/netdev.c | 171 +++++++++++++++++------------------
> drivers/net/e1000e/param.c | 60 +++++++------
> drivers/net/e1000e/phy.c | 204 +++++++++++++++++++++---------------------
> 11 files changed, 625 insertions(+), 612 deletions(-)
>
> --
> 1.7.2.3
>
We already have patches queued up internally and are under validation
for the changes in patches 1 through 5 along along with other patches
for e1000e. These patches will be posted shortly.
Patch 6 should be fixed in checkpatch.pl and from Florian's response, it
sounds like the fix is already out there.
Patch 7 does not resolve any warnings in checkpatch.pl and there is no
impending need to make this change.
So I won't be applying this series of patches.
Cheers,
Jeff
[-- Attachment #2: Type: text/plain, Size: 79 bytes --]
------------------------------------------------------------------------------
[-- Attachment #3: Type: text/plain, Size: 257 bytes --]
_______________________________________________
E1000-devel mailing list
E1000-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/e1000-devel
To learn more about Intel® Ethernet, visit http://communities.intel.com/community/wired
^ permalink raw reply [flat|nested] 27+ messages in thread