From: "Dmitry Kravkov" <dmitry@broadcom.com>
To: davem@davemloft.net, netdev@vger.kernel.org
Cc: "Eilon Greenstein" <eilong@broadcom.com>
Subject: [net-next 2/8] bnx2x: add select queue callback
Date: Thu, 9 Dec 2010 14:09:16 +0200 [thread overview]
Message-ID: <1291896556.8745.7.camel@lb-tlvb-dmitry> (raw)
The callback required to allow FCoE traffic to be
sent on separate priority queue from other L2 traffic,
which is managed by PFC in HW.
Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
---
drivers/net/bnx2x/bnx2x_cmn.c | 31 +++++++++++++++++++++++++++++++
drivers/net/bnx2x/bnx2x_cmn.h | 3 +++
drivers/net/bnx2x/bnx2x_main.c | 1 +
3 files changed, 35 insertions(+), 0 deletions(-)
diff --git a/drivers/net/bnx2x/bnx2x_cmn.c b/drivers/net/bnx2x/bnx2x_cmn.c
index a553fba..862b29e 100644
--- a/drivers/net/bnx2x/bnx2x_cmn.c
+++ b/drivers/net/bnx2x/bnx2x_cmn.c
@@ -1167,6 +1167,37 @@ void bnx2x_netif_stop(struct bnx2x *bp, int disable_hw)
netif_tx_disable(bp->dev);
}
+u16 bnx2x_select_queue(struct net_device *dev, struct sk_buff *skb)
+{
+ int fp_index = 0;
+
+#ifdef BCM_CNIC
+ struct bnx2x *bp = netdev_priv(dev);
+ if (NO_FCOE(bp))
+ return skb_tx_hash(dev, skb);
+ else {
+ struct ethhdr *hdr = (struct ethhdr *)skb->data;
+ u16 ether_type = ntohs(hdr->h_proto);
+
+ /* Skip VLAN tag if present */
+ if (ether_type == ETH_P_8021Q) {
+ struct vlan_ethhdr *vhdr =
+ (struct vlan_ethhdr *)skb->data;
+
+ ether_type = ntohs(vhdr->h_vlan_encapsulated_proto);
+ }
+
+ /* If ethertype is FCoE or FIP - use FCoE ring */
+ if ((ether_type == ETH_P_FCOE) || (ether_type == ETH_P_FIP))
+ return bnx2x_fcoe(bp, index);
+ }
+#endif
+ /* Select queue (if defined) adjust for fcoe */
+ fp_index = skb_tx_hash(dev, skb) - FCOE_CONTEXT_USE;
+
+ return (fp_index >= 0 ? fp_index : 0);
+}
+
void bnx2x_set_num_queues(struct bnx2x *bp)
{
switch (bp->multi_mode) {
diff --git a/drivers/net/bnx2x/bnx2x_cmn.h b/drivers/net/bnx2x/bnx2x_cmn.h
index 4bb0113..258f0c0 100644
--- a/drivers/net/bnx2x/bnx2x_cmn.h
+++ b/drivers/net/bnx2x/bnx2x_cmn.h
@@ -343,6 +343,9 @@ int bnx2x_nic_load(struct bnx2x *bp, int load_mode);
/* hard_xmit callback */
netdev_tx_t bnx2x_start_xmit(struct sk_buff *skb, struct net_device *dev);
+/* select_queue callback */
+u16 bnx2x_select_queue(struct net_device *dev, struct sk_buff *skb);
+
int bnx2x_change_mac_addr(struct net_device *dev, void *p);
/* NAPI poll Rx part */
diff --git a/drivers/net/bnx2x/bnx2x_main.c b/drivers/net/bnx2x/bnx2x_main.c
index 6c70ee5..c4dfb42 100644
--- a/drivers/net/bnx2x/bnx2x_main.c
+++ b/drivers/net/bnx2x/bnx2x_main.c
@@ -8977,6 +8977,7 @@ static const struct net_device_ops bnx2x_netdev_ops = {
.ndo_open = bnx2x_open,
.ndo_stop = bnx2x_close,
.ndo_start_xmit = bnx2x_start_xmit,
+ .ndo_select_queue = bnx2x_select_queue,
.ndo_set_multicast_list = bnx2x_set_rx_mode,
.ndo_set_mac_address = bnx2x_change_mac_addr,
.ndo_validate_addr = eth_validate_addr,
--
1.7.1
next reply other threads:[~2010-12-09 12:21 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-12-09 12:09 Dmitry Kravkov [this message]
2010-12-10 22:11 ` [net-next 2/8] bnx2x: add select queue callback David Miller
2010-12-12 10:25 ` Eilon Greenstein
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1291896556.8745.7.camel@lb-tlvb-dmitry \
--to=dmitry@broadcom.com \
--cc=davem@davemloft.net \
--cc=eilong@broadcom.com \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).