From mboxrd@z Thu Jan 1 00:00:00 1970 From: Shawn Guo Subject: [PATCH v3 00/10] net/fec: add dual fec support for i.MX28 Date: Wed, 5 Jan 2011 22:07:27 +0800 Message-ID: <1294236457-17476-1-git-send-email-shawn.guo@freescale.com> Mime-Version: 1.0 Content-Type: text/plain To: , , , , , , , Received: from am1ehsobe006.messaging.microsoft.com ([213.199.154.209]:24573 "EHLO AM1EHSOBE006.bigfish.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751026Ab1AEOGD (ORCPT ); Wed, 5 Jan 2011 09:06:03 -0500 Sender: netdev-owner@vger.kernel.org List-ID: This patch series is to add dual fec support for mx28, which is a mxs-based soc. Some code changes related to the following commits are also made in this patch set for some reasons. e6b043d512fa8d9a3801bf5d72bfa3b8fc3b3cc8 netdev/fec.c: add phylib supporting to enable carrier detection (v2) e3fe8558c7fc182972c3d947d88744482111f304 net/fec: fix pm to survive to suspend/resume It's been tested on mx28 evk and mx51 babbage. For mx28, it has to work against the tree git://git.pengutronix.de/git/imx/linux-2.6.git imx-for-2.6.38 plus patch [PATCH v4] ARM: mxs: Change duart device to use amba-pl011 Changes for v3: - Move v2 changes on patch #5 to #3 - Use device name to detect the running of mx28 fec controller naming ENET-MAC The 3 patches below preceding with * have changes since v2, and the detailed change log can be found in individual patch. [PATCH v3 01/10] net/fec: fix MMFR_OP type in fec_enet_mdio_write [PATCH v3 02/10] net/fec: remove the use of "index" which is legacy *[PATCH v3 03/10] net/fec: add mac field into platform data and consolidate fec_get_mac [PATCH v3 04/10] net/fec: improve pm for better suspend/resume *[PATCH v3 05/10] net/fec: add dual fec support for mx28 *[PATCH v3 06/10] ARM: mx28: update clock and device name for dual fec support [PATCH v3 07/10] ARM: mx28: add the second fec device registration [PATCH v3 08/10] ARM: mxs: add ocotp read function [PATCH v3 09/10] ARM: mx28: read fec mac address from ocotp [PATCH v3 10/10] ARM: mxs: add initial pm support Thanks for the review. Regards, Shawn