From: Shawn Guo <shawn.guo@freescale.com>
To: <davem@davemloft.net>, <gerg@snapgear.com>, <baruch@tkos.co.il>,
<eric@eukrea.com>, <bryan.wu@canonical.com>,
<r64343@freescale.com>, <B32542@freescale.com>,
<u.kleine-koenig@pengutro
Subject: [PATCH v4 02/10] net/fec: remove the use of "index" which is legacy
Date: Thu, 6 Jan 2011 15:13:10 +0800 [thread overview]
Message-ID: <1294297998-26930-3-git-send-email-shawn.guo@freescale.com> (raw)
In-Reply-To: <1294297998-26930-1-git-send-email-shawn.guo@freescale.com>
The "index" becomes legacy since fep->pdev->id starts working
to identify the instance.
Moreover, the call of fec_enet_init(ndev, 0) always passes 0
to fep->index. This makes the following code in fec_get_mac buggy.
/* Adjust MAC if using default MAC address */
if (iap == fec_mac_default)
dev->dev_addr[ETH_ALEN-1] = fec_mac_default[ETH_ALEN-1] + fep->index;
It may be the time to remove "index" and use fep->pdev->id instead.
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
---
drivers/net/fec.c | 9 +++------
1 files changed, 3 insertions(+), 6 deletions(-)
diff --git a/drivers/net/fec.c b/drivers/net/fec.c
index 52e9ca8..47f6b3b 100644
--- a/drivers/net/fec.c
+++ b/drivers/net/fec.c
@@ -186,7 +186,6 @@ struct fec_enet_private {
int mii_timeout;
uint phy_speed;
phy_interface_t phy_interface;
- int index;
int link;
int full_duplex;
struct completion mdio_done;
@@ -566,7 +565,7 @@ static void __inline__ fec_get_mac(struct net_device *dev)
/* Adjust MAC if using default MAC address */
if (iap == fec_mac_default)
- dev->dev_addr[ETH_ALEN-1] = fec_mac_default[ETH_ALEN-1] + fep->index;
+ dev->dev_addr[ETH_ALEN-1] = fec_mac_default[ETH_ALEN-1] + fep->pdev->id;
}
#endif
@@ -1067,9 +1066,8 @@ static const struct net_device_ops fec_netdev_ops = {
/*
* XXX: We need to clean up on failure exits here.
*
- * index is only used in legacy code
*/
-static int fec_enet_init(struct net_device *dev, int index)
+static int fec_enet_init(struct net_device *dev)
{
struct fec_enet_private *fep = netdev_priv(dev);
struct bufdesc *cbd_base;
@@ -1086,7 +1084,6 @@ static int fec_enet_init(struct net_device *dev, int index)
spin_lock_init(&fep->hw_lock);
- fep->index = index;
fep->hwp = (void __iomem *)dev->base_addr;
fep->netdev = dev;
@@ -1316,7 +1313,7 @@ fec_probe(struct platform_device *pdev)
}
clk_enable(fep->clk);
- ret = fec_enet_init(ndev, 0);
+ ret = fec_enet_init(ndev);
if (ret)
goto failed_init;
--
1.7.1
next prev parent reply other threads:[~2011-01-06 7:11 UTC|newest]
Thread overview: 59+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-01-06 7:13 [PATCH v4 00/10] net/fec: add dual fec support for i.MX28 Shawn Guo
2011-01-06 7:13 ` [PATCH v4 01/10] net/fec: fix MMFR_OP type in fec_enet_mdio_write Shawn Guo
2011-01-06 7:13 ` Shawn Guo [this message]
2011-01-06 7:13 ` [PATCH v4 03/10] net/fec: add mac field into platform data and consolidate fec_get_mac Shawn Guo
2011-01-06 7:13 ` [PATCH v4 04/10] net/fec: improve pm for better suspend/resume Shawn Guo
2011-01-06 7:13 ` [PATCH v4 05/10] net/fec: add dual fec support for mx28 Shawn Guo
2011-01-11 10:27 ` Sascha Hauer
2011-01-11 11:38 ` Shawn Guo
2011-01-11 12:24 ` Greg Ungerer
2011-01-11 13:07 ` Uwe Kleine-König
2011-01-11 13:25 ` Greg Ungerer
2011-01-12 7:42 ` Uwe Kleine-König
2011-01-13 14:48 ` Uwe Kleine-König
2011-01-14 5:48 ` Shawn Guo
2011-01-14 7:52 ` Uwe Kleine-König
2011-01-14 13:08 ` Shawn Guo
2011-01-17 8:16 ` Lothar Waßmann
2011-01-17 8:42 ` Uwe Kleine-König
2011-01-17 11:52 ` Shawn Guo
2011-01-17 9:06 ` Uwe Kleine-König
2011-01-13 21:06 ` Uwe Kleine-König
2011-01-06 7:13 ` [PATCH v4 06/10] ARM: mx28: update clock and device name for dual fec support Shawn Guo
2011-01-13 15:06 ` Uwe Kleine-König
2011-01-14 6:46 ` Shawn Guo
2011-01-14 6:53 ` [PATCH] ARM: mxs: pass fec device name via platform data Shawn Guo
2011-01-14 8:38 ` Uwe Kleine-König
2011-01-06 7:13 ` [PATCH v4 07/10] ARM: mx28: add the second fec device registration Shawn Guo
2011-01-11 10:29 ` Sascha Hauer
2011-01-11 11:39 ` Shawn Guo
2011-01-11 11:44 ` Sascha Hauer
2011-01-06 7:13 ` [PATCH v4 08/10] ARM: mxs: add ocotp read function Shawn Guo
2011-01-11 13:31 ` Sascha Hauer
2011-01-11 14:05 ` Uwe Kleine-König
2011-01-12 6:47 ` Shawn Guo
2011-01-12 14:50 ` Sascha Hauer
2011-01-12 16:01 ` Uwe Kleine-König
2011-01-13 1:55 ` Shawn Guo
2011-01-13 15:19 ` Uwe Kleine-König
2011-01-14 8:33 ` Sascha Hauer
2011-01-14 13:16 ` Shawn Guo
2011-01-19 10:48 ` Shawn Guo
2011-01-06 7:13 ` [PATCH v4 09/10] ARM: mx28: read fec mac address from ocotp Shawn Guo
2011-01-13 14:50 ` Uwe Kleine-König
2011-01-06 7:13 ` [PATCH v4 10/10] ARM: mxs: add initial pm support Shawn Guo
2011-01-09 23:44 ` [PATCH v4 00/10] net/fec: add dual fec support for i.MX28 David Miller
2011-01-10 3:08 ` Shawn Guo
2011-01-11 8:15 ` Shawn Guo
2011-01-11 12:07 ` [PATCH] net/fec: remove config FEC2 as it's used nowhere Shawn Guo
2011-01-11 22:03 ` David Miller
2011-01-11 12:09 ` [PATCH v5] ARM: mx28: add the second fec device registration Shawn Guo
2011-01-13 14:49 ` Uwe Kleine-König
2011-01-14 7:04 ` Shawn Guo
2011-01-14 7:24 ` [PATCH v5 08/10] ARM: mxs: add ocotp read function Shawn Guo
2011-01-14 8:40 ` Sascha Hauer
2011-01-14 9:48 ` Uwe Kleine-König
2011-01-14 8:42 ` Uwe Kleine-König
2011-01-14 7:25 ` [PATCH v5 09/10] ARM: mxs/mx28evk: read fec mac address from ocotp Shawn Guo
2011-01-14 15:11 ` [PATCH v6 08/10] ARM: mxs: add ocotp read function Shawn Guo
2011-01-24 9:05 ` [PATCH v5] ARM: mxs: add initial pm support Shawn Guo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1294297998-26930-3-git-send-email-shawn.guo@freescale.com \
--to=shawn.guo@freescale.com \
--cc=B32542@freescale.com \
--cc=baruch@tkos.co.il \
--cc=bryan.wu@canonical.com \
--cc=davem@davemloft.net \
--cc=eric@eukrea.com \
--cc=gerg@snapgear.com \
--cc=r64343@freescale.com \
--cc=u.kleine-koenig@pengutro \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).