Re: [PATCH 2.6.36] vlan: Avoid hwaccel vlan packets when vid not used

[Eric Dumazet <eric.dumazet@gmail.com>]

Le vendredi 07 janvier 2011 à 00:34 +0100, Eric Dumazet a écrit :
> Le jeudi 06 janvier 2011 à 16:01 -0500, Jesse Gross a écrit :
> 
> > Hmm, I thought that it might be some interaction with a corner case in
> > the networking core but now it seems less likely.  There weren't too
> > many vlan changes between the working and non-working states.  Plus,
> > since the rx counter isn't increasing, the packets probably aren't
> > making it anywhere.
> > 
> > I see that tg3 increases the drop counter in one place, which also
> > happens to be checking for vlan errors (at tg3.c:4753).  That seems
> > suspicious - maybe the NIC is only partially configured for vlan
> > offloading.  If we can confirm that is where the drop counter is being
> > incremented and what the error code is maybe it would shed some light.
> > 
> 
> Hmm... I am pretty sure the drop counter is the dev rx_dropped (core
> network handled, not tg3 one) incremented at the end of
> __netif_receive_skb() : We found no suitable handler for packets.
> 
> atomic_long_inc(&skb->dev->rx_dropped);
> 
> But thats a guess, I'll have to check
> 

wrong guess. Its really the tg3 which drops frames

increasing rx_missed_errors  (get_stat64(&hw_stats->rx_discards)

ip -s -s link show dev eth2
5: eth2: <BROADCAST,MULTICAST,SLAVE,UP,LOWER_UP> mtu 1500 qdisc mq
master bond0 state UP qlen 1000
    link/ether 00:1e:0b:92:78:50 brd ff:ff:ff:ff:ff:ff
    RX: bytes  packets  errors  dropped overrun mcast   
    11627      167      0       0       0       2      
    RX errors: length  crc     frame   fifo    missed
               0        0       0       0       2713   
    TX: bytes  packets  errors  dropped carrier collsns 
    2274       31       0       0       0       0      
    TX errors: aborted fifo    window  heartbeat
               0        0       0       0      



It would be nice Broadcom guys could help a bit ?