From: "Yaniv Rosner" <yanivr@broadcom.com>
To: davem@davemloft.net
Cc: netdev@vger.kernel.org, eilong@broadcom.com
Subject: [PATCH net-2.6 4/5] bnx2x: Fix potential link loss in multi-function mode
Date: Sun, 30 Jan 2011 16:15:07 +0200 [thread overview]
Message-ID: <1296396907.10095.53.camel@lb-tlvb-dmitry> (raw)
All functions on a port should be set to take the MDC/MDIO lock to avoid contention on the bus
Signed-off-by: Yaniv Rosner <yanivr@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
---
drivers/net/bnx2x/bnx2x_main.c | 18 +++++++++++-------
1 files changed, 11 insertions(+), 7 deletions(-)
diff --git a/drivers/net/bnx2x/bnx2x_main.c b/drivers/net/bnx2x/bnx2x_main.c
index 8cdcf5b..404d93e 100644
--- a/drivers/net/bnx2x/bnx2x_main.c
+++ b/drivers/net/bnx2x/bnx2x_main.c
@@ -5296,10 +5296,6 @@ static int bnx2x_init_hw_common(struct bnx2x *bp, u32 load_code)
}
}
- bp->port.need_hw_lock = bnx2x_hw_lock_required(bp,
- bp->common.shmem_base,
- bp->common.shmem2_base);
-
bnx2x_setup_fan_failure_detection(bp);
/* clear PXP2 attentions */
@@ -5503,9 +5499,6 @@ static int bnx2x_init_hw_port(struct bnx2x *bp)
bnx2x_init_block(bp, MCP_BLOCK, init_stage);
bnx2x_init_block(bp, DMAE_BLOCK, init_stage);
- bp->port.need_hw_lock = bnx2x_hw_lock_required(bp,
- bp->common.shmem_base,
- bp->common.shmem2_base);
if (bnx2x_fan_failure_det_req(bp, bp->common.shmem_base,
bp->common.shmem2_base, port)) {
u32 reg_addr = (port ? MISC_REG_AEU_ENABLE1_FUNC_1_OUT_0 :
@@ -8379,6 +8372,17 @@ static void __devinit bnx2x_get_port_hwinfo(struct bnx2x *bp)
(ext_phy_type != PORT_HW_CFG_XGXS_EXT_PHY_TYPE_NOT_CONN))
bp->mdio.prtad =
XGXS_EXT_PHY_ADDR(ext_phy_config);
+
+ /*
+ * Check if hw lock is required to access MDC/MDIO bus to the PHY(s)
+ * In MF mode, it is set to cover self test cases
+ */
+ if (IS_MF(bp))
+ bp->port.need_hw_lock = 1;
+ else
+ bp->port.need_hw_lock = bnx2x_hw_lock_required(bp,
+ bp->common.shmem_base,
+ bp->common.shmem2_base);
}
static void __devinit bnx2x_get_mac_hwinfo(struct bnx2x *bp)
--
1.7.1
reply other threads:[~2011-01-30 14:17 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1296396907.10095.53.camel@lb-tlvb-dmitry \
--to=yanivr@broadcom.com \
--cc=davem@davemloft.net \
--cc=eilong@broadcom.com \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).