[PATCH 1/3] pch_can: fix 800k comms issue

[PATCH 1/3] pch_can: fix 800k comms issue

[Tomoya MORINAGA]

Currently, 800k comms fails since prop_seg set zero.
(EG20T PCH CAN register of prop_seg must be set more than 1)
To prevent prop_seg set to zero, change tseg2_min 1 to 2.

Signed-off-by: Tomoya MORINAGA <tomoya-linux-ECg8zkTtlr0C6LszWs/t0g@public.gmane.org>
---
 drivers/net/can/pch_can.c |    2 +-
 1 files changed, 1 insertions(+), 1 deletions(-)

diff --git a/drivers/net/can/pch_can.c b/drivers/net/can/pch_can.c
index c42e972..9b171d1 100644
--- a/drivers/net/can/pch_can.c
+++ b/drivers/net/can/pch_can.c
@@ -187,7 +187,7 @@ static struct can_bittiming_const pch_can_bittiming_const = {
 	.name = KBUILD_MODNAME,
 	.tseg1_min = 1,
 	.tseg1_max = 16,
-	.tseg2_min = 1,
+	.tseg2_min = 2,
 	.tseg2_max = 8,
 	.sjw_max = 4,
 	.brp_min = 1,
-- 
1.7.3.4

[PATCH 2/3] pch_can: fix rmmod issue

[Tomoya MORINAGA]

Currently, when rmmod pch_can, kernel failure occurs.
The cause is pci_iounmap executed before pch_can_reset.
Thus pci_iounmap moves after pch_can_reset.

Signed-off-by: Tomoya MORINAGA <tomoya-linux-ECg8zkTtlr0C6LszWs/t0g@public.gmane.org>
---
 drivers/net/can/pch_can.c |    2 +-
 1 files changed, 1 insertions(+), 1 deletions(-)

diff --git a/drivers/net/can/pch_can.c b/drivers/net/can/pch_can.c
index 9b171d1..342d514 100644
--- a/drivers/net/can/pch_can.c
+++ b/drivers/net/can/pch_can.c
@@ -959,13 +959,13 @@ static void __devexit pch_can_remove(struct pci_dev *pdev)
 	struct pch_can_priv *priv = netdev_priv(ndev);
 
 	unregister_candev(priv->ndev);
-	pci_iounmap(pdev, priv->regs);
 	if (priv->use_msi)
 		pci_disable_msi(priv->dev);
 	pci_release_regions(pdev);
 	pci_disable_device(pdev);
 	pci_set_drvdata(pdev, NULL);
 	pch_can_reset(priv);
+	pci_iounmap(pdev, priv->regs);
 	free_candev(priv->ndev);
 }
 
-- 
1.7.3.4

Re: [PATCH 2/3] pch_can: fix rmmod issue

[David Miller]

From: Tomoya MORINAGA <tomoya-linux-ECg8zkTtlr0C6LszWs/t0g@public.gmane.org>
Date: Tue,  8 Feb 2011 18:29:02 +0900

> Currently, when rmmod pch_can, kernel failure occurs.
> The cause is pci_iounmap executed before pch_can_reset.
> Thus pci_iounmap moves after pch_can_reset.
> 
> Signed-off-by: Tomoya MORINAGA <tomoya-linux-ECg8zkTtlr0C6LszWs/t0g@public.gmane.org>

Applied.

[PATCH 3/3] pch_can: fix module reload issue with MSI

[Tomoya MORINAGA]

Currently, in case reload pch_can,
pch_can not to be able to catch interrupt.

The cause is bus-master is not set in pch_can.
Thus, add enabling bus-master processing.

Signed-off-by: Tomoya MORINAGA <tomoya-linux-ECg8zkTtlr0C6LszWs/t0g@public.gmane.org>
---
 drivers/net/can/pch_can.c |    1 +
 1 files changed, 1 insertions(+), 0 deletions(-)

diff --git a/drivers/net/can/pch_can.c b/drivers/net/can/pch_can.c
index 342d514..7d8bc12 100644
--- a/drivers/net/can/pch_can.c
+++ b/drivers/net/can/pch_can.c
@@ -1238,6 +1238,7 @@ static int __devinit pch_can_probe(struct pci_dev *pdev,
 		priv->use_msi = 0;
 	} else {
 		netdev_err(ndev, "PCH CAN opened with MSI\n");
+		pci_set_master(pdev);
 		priv->use_msi = 1;
 	}
 
-- 
1.7.3.4

Re: [PATCH 3/3] pch_can: fix module reload issue with MSI

[David Miller]

From: Tomoya MORINAGA <tomoya-linux-ECg8zkTtlr0C6LszWs/t0g@public.gmane.org>
Date: Tue,  8 Feb 2011 18:29:03 +0900

> Currently, in case reload pch_can,
> pch_can not to be able to catch interrupt.
> 
> The cause is bus-master is not set in pch_can.
> Thus, add enabling bus-master processing.
> 
> Signed-off-by: Tomoya MORINAGA <tomoya-linux-ECg8zkTtlr0C6LszWs/t0g@public.gmane.org>

Applied.

Re: [PATCH 1/3] pch_can: fix 800k comms issue

[David Miller]

From: Tomoya MORINAGA <tomoya-linux-ECg8zkTtlr0C6LszWs/t0g@public.gmane.org>
Date: Tue,  8 Feb 2011 18:29:01 +0900

> Currently, 800k comms fails since prop_seg set zero.
> (EG20T PCH CAN register of prop_seg must be set more than 1)
> To prevent prop_seg set to zero, change tseg2_min 1 to 2.
> 
> Signed-off-by: Tomoya MORINAGA <tomoya-linux-ECg8zkTtlr0C6LszWs/t0g@public.gmane.org>

Applied.

Re: [PATCH 1/3] pch_can: fix 800k comms issue

[Wolfgang Grandegger]

Hi Tomoya,

On 02/08/2011 10:29 AM, Tomoya MORINAGA wrote:
> Currently, 800k comms fails since prop_seg set zero.
> (EG20T PCH CAN register of prop_seg must be set more than 1)
> To prevent prop_seg set to zero, change tseg2_min 1 to 2.
> 
> Signed-off-by: Tomoya MORINAGA <tomoya-linux-ECg8zkTtlr0C6LszWs/t0g@public.gmane.org>
> ---
>  drivers/net/can/pch_can.c |    2 +-
>  1 files changed, 1 insertions(+), 1 deletions(-)
> 
> diff --git a/drivers/net/can/pch_can.c b/drivers/net/can/pch_can.c
> index c42e972..9b171d1 100644
> --- a/drivers/net/can/pch_can.c
> +++ b/drivers/net/can/pch_can.c
> @@ -187,7 +187,7 @@ static struct can_bittiming_const pch_can_bittiming_const = {
>  	.name = KBUILD_MODNAME,
>  	.tseg1_min = 1,
>  	.tseg1_max = 16,
> -	.tseg2_min = 1,
> +	.tseg2_min = 2,
>  	.tseg2_max = 8,
>  	.sjw_max = 4,
>  	.brp_min = 1,

I just realized that this fix is wrong. You wanted to set tseg1_min to 2
(and not tseg2_min). Could you please send a patch?

Thanks,

Wolfgang.