From: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
To: davem@davemloft.net
Cc: Emil Tantilov <emil.s.tantilov@intel.com>,
netdev@vger.kernel.org, gospo@redhat.com, bphilips@novell.com,
Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Subject: [net-2.6 3/7] ixgbe: fix variable set but not used warnings by gcc 4.6
Date: Tue, 8 Feb 2011 01:44:35 -0800 [thread overview]
Message-ID: <1297158279-20277-4-git-send-email-jeffrey.t.kirsher@intel.com> (raw)
In-Reply-To: <1297158279-20277-1-git-send-email-jeffrey.t.kirsher@intel.com>
From: Emil Tantilov <emil.s.tantilov@intel.com>
Caught with gcc 4.6 -Wunused-but-set-variable
Remove unused napi_vectors variable.
Fix the use of reset_bit in ixgbe_reset_hw_X540()
Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com>
Tested-by: Stephen Ko <stephen.s.ko@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
drivers/net/ixgbe/ixgbe_main.c | 3 ---
drivers/net/ixgbe/ixgbe_x540.c | 6 +++---
2 files changed, 3 insertions(+), 6 deletions(-)
diff --git a/drivers/net/ixgbe/ixgbe_main.c b/drivers/net/ixgbe/ixgbe_main.c
index 602078b..44a1cf0 100644
--- a/drivers/net/ixgbe/ixgbe_main.c
+++ b/drivers/net/ixgbe/ixgbe_main.c
@@ -4863,16 +4863,13 @@ static int ixgbe_alloc_q_vectors(struct ixgbe_adapter *adapter)
{
int q_idx, num_q_vectors;
struct ixgbe_q_vector *q_vector;
- int napi_vectors;
int (*poll)(struct napi_struct *, int);
if (adapter->flags & IXGBE_FLAG_MSIX_ENABLED) {
num_q_vectors = adapter->num_msix_vectors - NON_Q_VECTORS;
- napi_vectors = adapter->num_rx_queues;
poll = &ixgbe_clean_rxtx_many;
} else {
num_q_vectors = 1;
- napi_vectors = 1;
poll = &ixgbe_poll;
}
diff --git a/drivers/net/ixgbe/ixgbe_x540.c b/drivers/net/ixgbe/ixgbe_x540.c
index 3a89239..f2518b0 100644
--- a/drivers/net/ixgbe/ixgbe_x540.c
+++ b/drivers/net/ixgbe/ixgbe_x540.c
@@ -133,17 +133,17 @@ static s32 ixgbe_reset_hw_X540(struct ixgbe_hw *hw)
}
ctrl = IXGBE_READ_REG(hw, IXGBE_CTRL);
- IXGBE_WRITE_REG(hw, IXGBE_CTRL, (ctrl | IXGBE_CTRL_RST));
+ IXGBE_WRITE_REG(hw, IXGBE_CTRL, (ctrl | reset_bit));
IXGBE_WRITE_FLUSH(hw);
/* Poll for reset bit to self-clear indicating reset is complete */
for (i = 0; i < 10; i++) {
udelay(1);
ctrl = IXGBE_READ_REG(hw, IXGBE_CTRL);
- if (!(ctrl & IXGBE_CTRL_RST))
+ if (!(ctrl & reset_bit))
break;
}
- if (ctrl & IXGBE_CTRL_RST) {
+ if (ctrl & reset_bit) {
status = IXGBE_ERR_RESET_FAILED;
hw_dbg(hw, "Reset polling failed to complete.\n");
}
--
1.7.4
next prev parent reply other threads:[~2011-02-08 9:44 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-02-08 9:44 [net-2.6 0/7][pull request] Intel Wired LAN Driver Updates Jeff Kirsher
2011-02-08 9:44 ` [net-2.6 1/7] e1000e: tx_timeout should not increment for non-hang events Jeff Kirsher
2011-02-08 9:44 ` [net-2.6 2/7] e1000: add support for Marvell Alaska M88E1118R PHY Jeff Kirsher
2011-02-08 9:44 ` Jeff Kirsher [this message]
2011-02-08 9:44 ` [net-2.6 4/7] ixgbe: fix for 82599 erratum on Header Splitting Jeff Kirsher
2011-02-08 9:44 ` [net-2.6 5/7] ixgbe: limit VF access to network traffic Jeff Kirsher
2011-02-08 9:44 ` [net-2.6 6/7] ixgbe: cleanup variable initialization Jeff Kirsher
2011-02-08 9:44 ` [net-2.6 7/7] ixgbe: update version string Jeff Kirsher
2011-02-08 20:17 ` [net-2.6 0/7][pull request] Intel Wired LAN Driver Updates David Miller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1297158279-20277-4-git-send-email-jeffrey.t.kirsher@intel.com \
--to=jeffrey.t.kirsher@intel.com \
--cc=bphilips@novell.com \
--cc=davem@davemloft.net \
--cc=emil.s.tantilov@intel.com \
--cc=gospo@redhat.com \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).