From: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
To: davem@davemloft.net
Cc: Amir Hanania <amir.hanania@intel.com>,
netdev@vger.kernel.org, gospo@redhat.com, bphilips@novell.com,
Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Subject: [net-2.6 4/4] ixgbe: work around for DDP last buffer size
Date: Thu, 17 Feb 2011 01:35:10 -0800 [thread overview]
Message-ID: <1297935310-23510-5-git-send-email-jeffrey.t.kirsher@intel.com> (raw)
In-Reply-To: <1297935310-23510-1-git-send-email-jeffrey.t.kirsher@intel.com>
From: Amir Hanania <amir.hanania@intel.com>
A HW limitation was recently discovered where the last buffer in a DDP offload
cannot be a full buffer size in length. Fix the issue with a work around by
adding another buffer with size = 1.
Signed-off-by: Amir Hanania <amir.hanania@intel.com>
Tested-by: Ross Brattain <ross.b.brattain@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
drivers/net/ixgbe/ixgbe_fcoe.c | 51 +++++++++++++++++++++++++++++++++++++++-
drivers/net/ixgbe/ixgbe_fcoe.h | 2 +
2 files changed, 52 insertions(+), 1 deletions(-)
diff --git a/drivers/net/ixgbe/ixgbe_fcoe.c b/drivers/net/ixgbe/ixgbe_fcoe.c
index 8753980..c54a882 100644
--- a/drivers/net/ixgbe/ixgbe_fcoe.c
+++ b/drivers/net/ixgbe/ixgbe_fcoe.c
@@ -159,7 +159,7 @@ int ixgbe_fcoe_ddp_get(struct net_device *netdev, u16 xid,
struct scatterlist *sg;
unsigned int i, j, dmacount;
unsigned int len;
- static const unsigned int bufflen = 4096;
+ static const unsigned int bufflen = IXGBE_FCBUFF_MIN;
unsigned int firstoff = 0;
unsigned int lastsize;
unsigned int thisoff = 0;
@@ -254,6 +254,24 @@ int ixgbe_fcoe_ddp_get(struct net_device *netdev, u16 xid,
/* only the last buffer may have non-full bufflen */
lastsize = thisoff + thislen;
+ /*
+ * lastsize can not be buffer len.
+ * If it is then adding another buffer with lastsize = 1.
+ */
+ if (lastsize == bufflen) {
+ if (j >= IXGBE_BUFFCNT_MAX) {
+ e_err(drv, "xid=%x:%d,%d,%d:addr=%llx "
+ "not enough user buffers. We need an extra "
+ "buffer because lastsize is bufflen.\n",
+ xid, i, j, dmacount, (u64)addr);
+ goto out_noddp_free;
+ }
+
+ ddp->udl[j] = (u64)(fcoe->extra_ddp_buffer_dma);
+ j++;
+ lastsize = 1;
+ }
+
fcbuff = (IXGBE_FCBUFF_4KB << IXGBE_FCBUFF_BUFFSIZE_SHIFT);
fcbuff |= ((j & 0xff) << IXGBE_FCBUFF_BUFFCNT_SHIFT);
fcbuff |= (firstoff << IXGBE_FCBUFF_OFFSET_SHIFT);
@@ -532,6 +550,24 @@ void ixgbe_configure_fcoe(struct ixgbe_adapter *adapter)
e_err(drv, "failed to allocated FCoE DDP pool\n");
spin_lock_init(&fcoe->lock);
+
+ /* Extra buffer to be shared by all DDPs for HW work around */
+ fcoe->extra_ddp_buffer = kmalloc(IXGBE_FCBUFF_MIN, GFP_ATOMIC);
+ if (fcoe->extra_ddp_buffer == NULL) {
+ e_err(drv, "failed to allocated extra DDP buffer\n");
+ goto out_extra_ddp_buffer_alloc;
+ }
+
+ fcoe->extra_ddp_buffer_dma =
+ dma_map_single(&adapter->pdev->dev,
+ fcoe->extra_ddp_buffer,
+ IXGBE_FCBUFF_MIN,
+ DMA_FROM_DEVICE);
+ if (dma_mapping_error(&adapter->pdev->dev,
+ fcoe->extra_ddp_buffer_dma)) {
+ e_err(drv, "failed to map extra DDP buffer\n");
+ goto out_extra_ddp_buffer_dma;
+ }
}
/* Enable L2 eth type filter for FCoE */
@@ -581,6 +617,14 @@ void ixgbe_configure_fcoe(struct ixgbe_adapter *adapter)
}
}
#endif
+
+ return;
+
+out_extra_ddp_buffer_dma:
+ kfree(fcoe->extra_ddp_buffer);
+out_extra_ddp_buffer_alloc:
+ pci_pool_destroy(fcoe->pool);
+ fcoe->pool = NULL;
}
/**
@@ -600,6 +644,11 @@ void ixgbe_cleanup_fcoe(struct ixgbe_adapter *adapter)
if (fcoe->pool) {
for (i = 0; i < IXGBE_FCOE_DDP_MAX; i++)
ixgbe_fcoe_ddp_put(adapter->netdev, i);
+ dma_unmap_single(&adapter->pdev->dev,
+ fcoe->extra_ddp_buffer_dma,
+ IXGBE_FCBUFF_MIN,
+ DMA_FROM_DEVICE);
+ kfree(fcoe->extra_ddp_buffer);
pci_pool_destroy(fcoe->pool);
fcoe->pool = NULL;
}
diff --git a/drivers/net/ixgbe/ixgbe_fcoe.h b/drivers/net/ixgbe/ixgbe_fcoe.h
index 4bc2c55..65cc8fb 100644
--- a/drivers/net/ixgbe/ixgbe_fcoe.h
+++ b/drivers/net/ixgbe/ixgbe_fcoe.h
@@ -70,6 +70,8 @@ struct ixgbe_fcoe {
spinlock_t lock;
struct pci_pool *pool;
struct ixgbe_fcoe_ddp ddp[IXGBE_FCOE_DDP_MAX];
+ unsigned char *extra_ddp_buffer;
+ dma_addr_t extra_ddp_buffer_dma;
};
#endif /* _IXGBE_FCOE_H */
--
1.7.4
next prev parent reply other threads:[~2011-02-17 9:35 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-02-17 9:35 [net-2.6 0/4][pull request] Intel Wired LAN Driver Updates Jeff Kirsher
2011-02-17 9:35 ` [net-2.6 1/4] e1000e: check down flag in tasks Jeff Kirsher
2011-02-17 9:35 ` [net-2.6 2/4] e1000e: flush all writebacks before unload Jeff Kirsher
2011-02-17 9:35 ` [net-2.6 3/4] ixgbe: fix panic due to uninitialised pointer Jeff Kirsher
2011-02-17 9:35 ` Jeff Kirsher [this message]
2011-02-17 20:44 ` [net-2.6 0/4][pull request] Intel Wired LAN Driver Updates David Miller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1297935310-23510-5-git-send-email-jeffrey.t.kirsher@intel.com \
--to=jeffrey.t.kirsher@intel.com \
--cc=amir.hanania@intel.com \
--cc=bphilips@novell.com \
--cc=davem@davemloft.net \
--cc=gospo@redhat.com \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).