From: Hayes Wang <hayeswang@realtek.com>
To: <romieu@fr.zoreil.com>
Cc: <netdev@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
Hayes Wang <hayeswang@realtek.com>
Subject: [PATCH v2 1/2] r8169: Correct settings of rtl8102e
Date: Fri, 18 Feb 2011 16:34:44 +0800 [thread overview]
Message-ID: <1298018085-1370-1-git-send-email-hayeswang@realtek.com> (raw)
Adjust and remove certain settings of RTL8102E which are for previous chips.
Signed-off-by: Hayes Wang <hayeswang@realtek.com>
---
drivers/net/r8169.c | 20 ++++++--------------
1 files changed, 6 insertions(+), 14 deletions(-)
diff --git a/drivers/net/r8169.c b/drivers/net/r8169.c
index 59ccf0c..9eaf78f 100644
--- a/drivers/net/r8169.c
+++ b/drivers/net/r8169.c
@@ -3042,7 +3042,7 @@ rtl8169_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
goto err_out_mwi_2;
}
- tp->cp_cmd = PCIMulRW | RxChkSum;
+ tp->cp_cmd = RxChkSum;
if ((sizeof(dma_addr_t) > 4) &&
!pci_set_dma_mask(pdev, DMA_BIT_MASK(64)) && use_dac) {
@@ -3845,8 +3845,7 @@ static void rtl_hw_start_8168(struct net_device *dev)
Cxpl_dbg_sel | \
ASF | \
PktCntrDisable | \
- PCIDAC | \
- PCIMulRW)
+ Mac_dbgo_sel)
static void rtl_hw_start_8102e_1(void __iomem *ioaddr, struct pci_dev *pdev)
{
@@ -3876,8 +3875,6 @@ static void rtl_hw_start_8102e_1(void __iomem *ioaddr, struct pci_dev *pdev)
if ((cfg1 & LEDS0) && (cfg1 & LEDS1))
RTL_W8(Config1, cfg1 & ~LEDS0);
- RTL_W16(CPlusCmd, RTL_R16(CPlusCmd) & ~R810X_CPCMD_QUIRK_MASK);
-
rtl_ephy_init(ioaddr, e_info_8102e_1, ARRAY_SIZE(e_info_8102e_1));
}
@@ -3889,8 +3886,6 @@ static void rtl_hw_start_8102e_2(void __iomem *ioaddr, struct pci_dev *pdev)
RTL_W8(Config1, MEMMAP | IOMAP | VPD | PMEnable);
RTL_W8(Config3, RTL_R8(Config3) & ~Beacon_en);
-
- RTL_W16(CPlusCmd, RTL_R16(CPlusCmd) & ~R810X_CPCMD_QUIRK_MASK);
}
static void rtl_hw_start_8102e_3(void __iomem *ioaddr, struct pci_dev *pdev)
@@ -3916,6 +3911,8 @@ static void rtl_hw_start_8101(struct net_device *dev)
}
}
+ RTL_W8(Cfg9346, Cfg9346_Unlock);
+
switch (tp->mac_version) {
case RTL_GIGA_MAC_VER_07:
rtl_hw_start_8102e_1(ioaddr, pdev);
@@ -3930,14 +3927,13 @@ static void rtl_hw_start_8101(struct net_device *dev)
break;
}
- RTL_W8(Cfg9346, Cfg9346_Unlock);
+ RTL_W8(Cfg9346, Cfg9346_Lock);
RTL_W8(MaxTxPacketSize, TxPacketMax);
rtl_set_rx_max_size(ioaddr, rx_buf_sz);
- tp->cp_cmd |= rtl_rw_cpluscmd(ioaddr) | PCIMulRW;
-
+ tp->cp_cmd &= ~R810X_CPCMD_QUIRK_MASK;
RTL_W16(CPlusCmd, tp->cp_cmd);
RTL_W16(IntrMitigate, 0x0000);
@@ -3947,14 +3943,10 @@ static void rtl_hw_start_8101(struct net_device *dev)
RTL_W8(ChipCmd, CmdTxEnb | CmdRxEnb);
rtl_set_rx_tx_config_registers(tp);
- RTL_W8(Cfg9346, Cfg9346_Lock);
-
RTL_R8(IntrMask);
rtl_set_rx_mode(dev);
- RTL_W8(ChipCmd, CmdTxEnb | CmdRxEnb);
-
RTL_W16(MultiIntr, RTL_R16(MultiIntr) & 0xf000);
RTL_W16(IntrMask, tp->intr_event);
--
1.7.3.2
next reply other threads:[~2011-02-18 8:34 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-02-18 8:34 Hayes Wang [this message]
2011-02-18 8:34 ` [PATCH v2 2/2] r8169: Support RTL8105E Hayes Wang
2011-02-21 7:33 ` Francois Romieu
2011-02-21 9:17 ` hayeswang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1298018085-1370-1-git-send-email-hayeswang@realtek.com \
--to=hayeswang@realtek.com \
--cc=linux-kernel@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=romieu@fr.zoreil.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).