netdev.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Macpaul Lin <macpaul.lin@mediatek.com>
To: Biao Huang <biao.huang@mediatek.com>,
	David Miller <davem@davemloft.net>,
	Rob Herring <robh+dt@kernel.org>,
	Bartosz Golaszewski <brgl@bgdev.pl>,
	"Fabien Parent" <fparent@baylibre.com>
Cc: Jakub Kicinski <kuba@kernel.org>, Felix Fietkau <nbd@nbd.name>,
	"John Crispin" <john@phrozen.org>,
	Sean Wang <sean.wang@mediatek.com>,
	Mark Lee <Mark-MC.Lee@mediatek.com>,
	Matthias Brugger <matthias.bgg@gmail.com>,
	<netdev@vger.kernel.org>, <devicetree@vger.kernel.org>,
	<linux-kernel@vger.kernel.org>,
	<linux-arm-kernel@lists.infradead.org>,
	<linux-mediatek@lists.infradead.org>,
	Yinghua Pan <ot_yinghua.pan@mediatek.com>,
	<srv_heupstream@mediatek.com>
Subject: Re: [PATCH net-next v2 3/9] net: ethernet: mtk-star-emac: add support for MT8365 SoC
Date: Thu, 27 Jan 2022 10:22:28 +0800	[thread overview]
Message-ID: <129fa3fc-12bc-3af6-5259-88dcddb2fd28@mediatek.com> (raw)
In-Reply-To: <20220127015857.9868-4-biao.huang@mediatek.com>

On 1/27/22 9:58 AM, Biao Huang wrote:
> Add Ethernet driver support for MT8365 SoC.
> 
> Signed-off-by: Biao Huang <biao.huang@mediatek.com>
> Signed-off-by: Yinghua Pan <ot_yinghua.pan@mediatek.com>
> Signed-off-by: Fabien Parent <fparent@baylibre.com>
> ---
>   drivers/net/ethernet/mediatek/mtk_star_emac.c | 75 ++++++++++++++++---
>   1 file changed, 64 insertions(+), 11 deletions(-)
> 
> diff --git a/drivers/net/ethernet/mediatek/mtk_star_emac.c b/drivers/net/ethernet/mediatek/mtk_star_emac.c
> index a8fbbbcd185b..a3884beaa3fe 100644
> --- a/drivers/net/ethernet/mediatek/mtk_star_emac.c
> +++ b/drivers/net/ethernet/mediatek/mtk_star_emac.c
> @@ -151,6 +151,7 @@ static const char *const mtk_star_clk_names[] = { "core", "reg", "trans" };
>   #define MTK_STAR_REG_MAC_CLK_CONF		0x00ac
>   #define MTK_STAR_MSK_MAC_CLK_CONF		GENMASK(7, 0)
>   #define MTK_STAR_BIT_CLK_DIV_10			0x0a
> +#define MTK_STAR_BIT_CLK_DIV_50			0x32
>   
>   /* Counter registers. */
>   #define MTK_STAR_REG_C_RXOKPKT			0x0100
> @@ -183,9 +184,11 @@ static const char *const mtk_star_clk_names[] = { "core", "reg", "trans" };
>   #define MTK_STAR_REG_C_RX_TWIST			0x0218
>   
>   /* Ethernet CFG Control */
> -#define MTK_PERICFG_REG_NIC_CFG_CON		0x03c4
> -#define MTK_PERICFG_MSK_NIC_CFG_CON_CFG_MII	GENMASK(3, 0)
> -#define MTK_PERICFG_BIT_NIC_CFG_CON_RMII	BIT(0)
> +#define MTK_PERICFG_REG_NIC_CFG0_CON		0x03c4
> +#define MTK_PERICFG_REG_NIC_CFG1_CON		0x03c8
> +#define MTK_PERICFG_REG_NIC_CFG_CON_V2		0x0c10
> +#define MTK_PERICFG_REG_NIC_CFG_CON_CFG_INTF	GENMASK(3, 0)
> +#define MTK_PERICFG_BIT_NIC_CFG_CON_RMII	1
>   
>   /* Represents the actual structure of descriptors used by the MAC. We can
>    * reuse the same structure for both TX and RX - the layout is the same, only
> @@ -234,6 +237,7 @@ struct mtk_star_ring {
>   };
>   
>   struct mtk_star_compat {
> +	int (*set_interface_mode)(struct net_device *ndev);
>   	unsigned char bit_clk_div;
>   };
>   
> @@ -909,13 +913,6 @@ static void mtk_star_init_config(struct mtk_star_priv *priv)
>   			   priv->compat_data->bit_clk_div);
>   }
>   
> -static void mtk_star_set_mode_rmii(struct mtk_star_priv *priv)
> -{
> -	regmap_update_bits(priv->pericfg, MTK_PERICFG_REG_NIC_CFG_CON,
> -			   MTK_PERICFG_MSK_NIC_CFG_CON_CFG_MII,
> -			   MTK_PERICFG_BIT_NIC_CFG_CON_RMII);
> -}
> -
>   static int mtk_star_enable(struct net_device *ndev)
>   {
>   	struct mtk_star_priv *priv = netdev_priv(ndev);
> @@ -1531,7 +1528,13 @@ static int mtk_star_probe(struct platform_device *pdev)
>   		return -ENODEV;
>   	}
>   
> -	mtk_star_set_mode_rmii(priv);
> +	if (priv->compat_data->set_interface_mode) {
> +		ret = priv->compat_data->set_interface_mode(ndev);
> +		if (ret) {
> +			dev_err(dev, "Failed to set phy interface, err = %d\n", ret);
> +			return -EINVAL;
> +		}
> +	}
>   
>   	ret = dma_set_mask_and_coherent(dev, DMA_BIT_MASK(32));
>   	if (ret) {
> @@ -1564,10 +1567,58 @@ static int mtk_star_probe(struct platform_device *pdev)
>   	return devm_register_netdev(dev, ndev);
>   }
>   
> +static int mt8516_set_interface_mode(struct net_device *ndev)
> +{
> +	struct mtk_star_priv *priv = netdev_priv(ndev);
> +	struct device *dev = mtk_star_get_dev(priv);
> +	unsigned int intf_val;
> +
> +	switch (priv->phy_intf) {
> +	case PHY_INTERFACE_MODE_RMII:
> +		intf_val = MTK_PERICFG_BIT_NIC_CFG_CON_RMII;
> +		break;
> +	default:
> +		dev_err(dev, "This interface not supported\n");
> +		return -EINVAL;
> +	}
> +
> +	return regmap_update_bits(priv->pericfg,
> +				  MTK_PERICFG_REG_NIC_CFG0_CON,
> +				  MTK_PERICFG_REG_NIC_CFG_CON_CFG_INTF,
> +				  intf_val);
> +}
> +
> +static int mt8365_set_interface_mode(struct net_device *ndev)
> +{
> +	struct mtk_star_priv *priv = netdev_priv(ndev);
> +	struct device *dev = mtk_star_get_dev(priv);
> +	unsigned int intf_val;
> +
> +	switch (priv->phy_intf) {
> +	case PHY_INTERFACE_MODE_RMII:
> +		intf_val = MTK_PERICFG_BIT_NIC_CFG_CON_RMII;
> +		break;
> +	default:
> +		dev_err(dev, "This interface not supported\n");
> +		return -EINVAL;
> +	}
> +
> +	return regmap_update_bits(priv->pericfg,
> +				  MTK_PERICFG_REG_NIC_CFG_CON_V2,
> +				  MTK_PERICFG_REG_NIC_CFG_CON_CFG_INTF,
> +				  intf_val);
> +}
> +
>   static const struct mtk_star_compat mtk_star_mt8516_compat = {
> +	.set_interface_mode = mt8516_set_interface_mode,
>   	.bit_clk_div = MTK_STAR_BIT_CLK_DIV_10,
>   };
>   
> +static const struct mtk_star_compat mtk_star_mt8365_compat = {
> +	.set_interface_mode = mt8365_set_interface_mode,
> +	.bit_clk_div = MTK_STAR_BIT_CLK_DIV_50,
> +};
> +
>   static const struct of_device_id mtk_star_of_match[] = {
>   	{ .compatible = "mediatek,mt8516-eth",
>   	  .data = &mtk_star_mt8516_compat },
> @@ -1575,6 +1626,8 @@ static const struct of_device_id mtk_star_of_match[] = {
>   	  .data = &mtk_star_mt8516_compat },
>   	{ .compatible = "mediatek,mt8175-eth",
>   	  .data = &mtk_star_mt8516_compat },
> +	{ .compatible = "mediatek,mt8365-eth",
> +	  .data = &mtk_star_mt8365_compat },
>   	{ }
>   };
>   MODULE_DEVICE_TABLE(of, mtk_star_of_match);
> 

Reviewed-by: Macpaul Lin <macpaul.lin@mediatek.com>

Regards,
Macpaul Lin

  reply	other threads:[~2022-01-27  2:22 UTC|newest]

Thread overview: 23+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-01-27  1:58 [PATCH net-next v2 0/9] add more features for mtk-star-emac Biao Huang
2022-01-27  1:58 ` [PATCH net-next v2 1/9] net: ethernet: mtk-star-emac: store bit_clk_div in compat structure Biao Huang
2022-01-27  2:23   ` Macpaul Lin
2022-01-27  1:58 ` [PATCH net-next v2 2/9] net: ethernet: mtk-star-emac: modify IRQ trigger flags Biao Huang
2022-01-27  1:58 ` [PATCH net-next v2 3/9] net: ethernet: mtk-star-emac: add support for MT8365 SoC Biao Huang
2022-01-27  2:22   ` Macpaul Lin [this message]
2022-01-27  1:58 ` [PATCH net-next v2 4/9] dt-bindings: net: mtk-star-emac: add support for MT8365 Biao Huang
2022-02-09  3:35   ` Rob Herring
2022-01-27  1:58 ` [PATCH net-next v2 5/9] net: ethernet: mtk-star-emac: add clock pad selection for RMII Biao Huang
2022-01-27  2:26   ` Macpaul Lin
2022-01-27  1:58 ` [PATCH net-next v2 6/9] net: ethernet: mtk-star-emac: add timing adjustment support Biao Huang
2022-01-27  2:20   ` Macpaul Lin
2022-01-27  1:58 ` [PATCH net-next v2 7/9] dt-bindings: net: mtk-star-emac: add description for new properties Biao Huang
2022-02-09  3:36   ` Rob Herring
2022-01-27  1:58 ` [PATCH net-next v2 8/9] net: ethernet: mtk-star-emac: add support for MII interface Biao Huang
2022-01-27  2:17   ` Macpaul Lin
2022-01-27  1:58 ` [PATCH net-next v2 9/9] net: ethernet: mtk-star-emac: separate tx/rx handling with two NAPIs Biao Huang
2022-01-28  3:43   ` Jakub Kicinski
2022-01-28  7:05     ` Biao Huang
2022-01-28 15:44       ` Jakub Kicinski
2022-03-14  7:01         ` Biao Huang
2022-03-14 15:57           ` Jakub Kicinski
2022-03-15  0:59             ` Biao Huang

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=129fa3fc-12bc-3af6-5259-88dcddb2fd28@mediatek.com \
    --to=macpaul.lin@mediatek.com \
    --cc=Mark-MC.Lee@mediatek.com \
    --cc=biao.huang@mediatek.com \
    --cc=brgl@bgdev.pl \
    --cc=davem@davemloft.net \
    --cc=devicetree@vger.kernel.org \
    --cc=fparent@baylibre.com \
    --cc=john@phrozen.org \
    --cc=kuba@kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mediatek@lists.infradead.org \
    --cc=matthias.bgg@gmail.com \
    --cc=nbd@nbd.name \
    --cc=netdev@vger.kernel.org \
    --cc=ot_yinghua.pan@mediatek.com \
    --cc=robh+dt@kernel.org \
    --cc=sean.wang@mediatek.com \
    --cc=srv_heupstream@mediatek.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).