netdev.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: "Timo Teräs" <timo.teras@iki.fi>
To: netdev@vger.kernel.org
Cc: "Doug Kehn" <rdkehn@yahoo.com>, "Timo Teräs" <timo.teras@iki.fi>
Subject: [PATCH] net: gre: provide multicast mappings for ipv4 and ipv6
Date: Tue, 29 Mar 2011 11:40:53 +0300	[thread overview]
Message-ID: <1301388053-6083-1-git-send-email-timo.teras@iki.fi> (raw)
In-Reply-To: <4D8F6313.60408@iki.fi>

My commit 6d55cb91a0020ac0 (gre: fix hard header destination
address checking) broke multicast.

The reason is that ip_gre used to get ipgre_header() calls with
zero destination if we have NOARP or multicast destination. Instead
the actual target was decided at ipgre_tunnel_xmit() time based on
per-protocol dissection.

Instead of allowing the "abuse" of ->header() calls with invalid
destination, this creates multicast mappings for ip_gre. This also
fixes "ip neigh show nud noarp" to display the proper multicast
mappings used by the gre device.

Reported-by: Doug Kehn <rdkehn@yahoo.com>
Signed-off-by: Timo Teräs <timo.teras@iki.fi>
---
Compile tested only. Doug tested IPv4 side with the earlier patch.

The IPv6 side needs a review. I'm not sure if mapped IPv4 multicast
addresses are intrepreted as multicast addresses by ndisc code or
if we could map real IPv6 multicast addresses to IPv4 multicast
addresses.

 include/net/if_inet6.h |   16 ++++++++++++++++
 include/net/ip.h       |    8 ++++++++
 net/ipv4/arp.c         |    3 +++
 net/ipv6/ndisc.c       |    2 ++
 4 files changed, 29 insertions(+), 0 deletions(-)

diff --git a/include/net/if_inet6.h b/include/net/if_inet6.h
index 04977ee..fccc218 100644
--- a/include/net/if_inet6.h
+++ b/include/net/if_inet6.h
@@ -286,5 +286,21 @@ static inline void ipv6_ib_mc_map(const struct in6_addr *addr,
 	buf[9]  = broadcast[9];
 	memcpy(buf + 10, addr->s6_addr + 6, 10);
 }
+
+static inline int ipv6_ipgre_mc_map(const struct in6_addr *addr,
+				    const unsigned char *broadcast, char *buf)
+{
+	if ((broadcast[0] | broadcast[1] | broadcast[2] | broadcast[3]) != 0) {
+		memcpy(buf, broadcast, 4);
+	} else {
+		/* v4mapped? */
+		if ((addr->s6_addr32[0] | addr->s6_addr32[1] |
+		     (addr->s6_addr32[2] ^ htonl(0x0000ffff))) != 0)
+			return -EINVAL;
+		memcpy(buf, &addr->s6_addr32[3], 4);
+	}
+	return 0;
+}
+
 #endif
 #endif
diff --git a/include/net/ip.h b/include/net/ip.h
index a4f6311..7c41658 100644
--- a/include/net/ip.h
+++ b/include/net/ip.h
@@ -339,6 +339,14 @@ static inline void ip_ib_mc_map(__be32 naddr, const unsigned char *broadcast, ch
 	buf[16] = addr & 0x0f;
 }
 
+static inline void ip_ipgre_mc_map(__be32 naddr, const unsigned char *broadcast, char *buf)
+{
+	if ((broadcast[0] | broadcast[1] | broadcast[2] | broadcast[3]) != 0)
+		memcpy(buf, broadcast, 4);
+	else
+		memcpy(buf, &naddr, sizeof(naddr));
+}
+
 #if defined(CONFIG_IPV6) || defined(CONFIG_IPV6_MODULE)
 #include <linux/ipv6.h>
 #endif
diff --git a/net/ipv4/arp.c b/net/ipv4/arp.c
index 090d273..1b74d3b 100644
--- a/net/ipv4/arp.c
+++ b/net/ipv4/arp.c
@@ -215,6 +215,9 @@ int arp_mc_map(__be32 addr, u8 *haddr, struct net_device *dev, int dir)
 	case ARPHRD_INFINIBAND:
 		ip_ib_mc_map(addr, dev->broadcast, haddr);
 		return 0;
+	case ARPHRD_IPGRE:
+		ip_ipgre_mc_map(addr, dev->broadcast, haddr);
+		return 0;
 	default:
 		if (dir) {
 			memcpy(haddr, dev->broadcast, dev->addr_len);
diff --git a/net/ipv6/ndisc.c b/net/ipv6/ndisc.c
index 0e49c9d..92f952d 100644
--- a/net/ipv6/ndisc.c
+++ b/net/ipv6/ndisc.c
@@ -341,6 +341,8 @@ int ndisc_mc_map(struct in6_addr *addr, char *buf, struct net_device *dev, int d
 	case ARPHRD_INFINIBAND:
 		ipv6_ib_mc_map(addr, dev->broadcast, buf);
 		return 0;
+	case ARPHRD_IPGRE:
+		return ipv6_ipgre_mc_map(addr, dev->broadcast, buf);
 	default:
 		if (dir) {
 			memcpy(buf, dev->broadcast, dev->addr_len);
-- 
1.7.1


  reply	other threads:[~2011-03-29  8:41 UTC|newest]

Thread overview: 15+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2011-03-14 23:34 Multicast Fails Over Multipoint GRE Tunnel Doug Kehn
2011-03-15 15:34 ` Eric Dumazet
2011-03-15 16:36   ` Timo Teräs
2011-03-15 18:28     ` Timo Teräs
2011-03-15 21:33     ` Doug Kehn
2011-03-15 21:35     ` Doug Kehn
2011-03-16  6:01       ` Timo Teräs
2011-03-16 20:02         ` Doug Kehn
2011-03-27 16:17           ` Timo Teräs
2011-03-29  8:40             ` Timo Teräs [this message]
2011-03-29  9:11               ` [PATCH] net: gre: provide multicast mappings for ipv4 and ipv6 Eric Dumazet
2011-03-29 10:00                 ` Timo Teräs
2011-03-29 20:26               ` Doug Kehn
2011-03-30  7:11                 ` David Miller
2011-03-15 21:24   ` Multicast Fails Over Multipoint GRE Tunnel Doug Kehn

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1301388053-6083-1-git-send-email-timo.teras@iki.fi \
    --to=timo.teras@iki.fi \
    --cc=netdev@vger.kernel.org \
    --cc=rdkehn@yahoo.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).