From: "Michael Chan" <mchan@broadcom.com>
To: davem@davemloft.net
Cc: dmitry@broadcom.com, eilong@broadcom.com, netdev@vger.kernel.org
Subject: [PATCH net-next 3/3] bnx2x, cnic: Disable iSCSI if DCBX negotiation is successful
Date: Thu, 31 Mar 2011 14:45:33 -0800 [thread overview]
Message-ID: <1301611533-9725-3-git-send-email-mchan@broadcom.com> (raw)
In-Reply-To: <1301611533-9725-2-git-send-email-mchan@broadcom.com>
From: Dmitry Kravkov <dmitry@broadcom.com>
With current bnx2x firmware 6.2.9, iSCSI is not supported in DCB
network, so we need to disable it. Add cnic command to disconnect
iSCSI connections and prevent future connections when DCBX negotiation
succeeds.
Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com>
Signed-off-by: Michael Chan <mchan@broadcom.com>
---
drivers/net/bnx2x/bnx2x_dcb.c | 22 ++++++++++++++
drivers/net/bnx2x/bnx2x_dcb.h | 8 ++++-
drivers/net/bnx2x/bnx2x_main.c | 5 +++
drivers/net/cnic.c | 64 ++++++++++++++++++++++++++++------------
drivers/net/cnic.h | 1 +
drivers/net/cnic_if.h | 6 ++-
6 files changed, 83 insertions(+), 23 deletions(-)
diff --git a/drivers/net/bnx2x/bnx2x_dcb.c b/drivers/net/bnx2x/bnx2x_dcb.c
index 9a24d79..1214907 100644
--- a/drivers/net/bnx2x/bnx2x_dcb.c
+++ b/drivers/net/bnx2x/bnx2x_dcb.c
@@ -571,6 +571,28 @@ void bnx2x_dcbx_set_params(struct bnx2x *bp, u32 state)
{
switch (state) {
case BNX2X_DCBX_STATE_NEG_RECEIVED:
+#ifdef BCM_CNIC
+ if (bp->state != BNX2X_STATE_OPENING_WAIT4_LOAD) {
+ struct cnic_ops *c_ops;
+ struct cnic_eth_dev *cp = &bp->cnic_eth_dev;
+ bp->flags |= NO_ISCSI_OOO_FLAG | NO_ISCSI_FLAG;
+ cp->drv_state |= CNIC_DRV_STATE_NO_ISCSI_OOO;
+ cp->drv_state |= CNIC_DRV_STATE_NO_ISCSI;
+
+ rcu_read_lock();
+ c_ops = rcu_dereference(bp->cnic_ops);
+ if (c_ops) {
+ bnx2x_cnic_notify(bp, CNIC_CTL_STOP_ISCSI_CMD);
+ rcu_read_unlock();
+ return;
+ }
+ rcu_read_unlock();
+ }
+
+ /* fall through if no CNIC initialized */
+ case BNX2X_DCBX_STATE_ISCSI_STOPPED:
+#endif
+
{
DP(NETIF_MSG_LINK, "BNX2X_DCBX_STATE_NEG_RECEIVED\n");
#ifdef BCM_DCBNL
diff --git a/drivers/net/bnx2x/bnx2x_dcb.h b/drivers/net/bnx2x/bnx2x_dcb.h
index 71b8eda..1e14775 100644
--- a/drivers/net/bnx2x/bnx2x_dcb.h
+++ b/drivers/net/bnx2x/bnx2x_dcb.h
@@ -183,9 +183,13 @@ void bnx2x_dcbx_set_state(struct bnx2x *bp, bool dcb_on, u32 dcbx_enabled);
enum {
BNX2X_DCBX_STATE_NEG_RECEIVED = 0x1,
- BNX2X_DCBX_STATE_TX_PAUSED = 0x2,
- BNX2X_DCBX_STATE_TX_RELEASED = 0x4
+#ifdef BCM_CNIC
+ BNX2X_DCBX_STATE_ISCSI_STOPPED,
+#endif
+ BNX2X_DCBX_STATE_TX_PAUSED,
+ BNX2X_DCBX_STATE_TX_RELEASED
};
+
void bnx2x_dcbx_set_params(struct bnx2x *bp, u32 state);
/* DCB netlink */
diff --git a/drivers/net/bnx2x/bnx2x_main.c b/drivers/net/bnx2x/bnx2x_main.c
index 32e64cc..f3cf889 100644
--- a/drivers/net/bnx2x/bnx2x_main.c
+++ b/drivers/net/bnx2x/bnx2x_main.c
@@ -10342,6 +10342,11 @@ static int bnx2x_drv_ctl(struct net_device *dev, struct drv_ctl_info *ctl)
break;
}
+ case DRV_CTL_ISCSI_STOPPED_CMD: {
+ bnx2x_dcbx_set_params(bp, BNX2X_DCBX_STATE_ISCSI_STOPPED);
+ break;
+ }
+
default:
BNX2X_ERR("unknown command %x\n", ctl->cmd);
rc = -EINVAL;
diff --git a/drivers/net/cnic.c b/drivers/net/cnic.c
index 8cca60e..5dfbff0 100644
--- a/drivers/net/cnic.c
+++ b/drivers/net/cnic.c
@@ -2966,31 +2966,36 @@ static int cnic_service_bnx2x(void *data, void *status_blk)
return 0;
}
-static void cnic_ulp_stop(struct cnic_dev *dev)
+static void cnic_ulp_stop_one(struct cnic_local *cp, int if_type)
{
- struct cnic_local *cp = dev->cnic_priv;
- int if_type;
-
- cnic_send_nlmsg(cp, ISCSI_KEVENT_IF_DOWN, NULL);
+ struct cnic_ulp_ops *ulp_ops;
- for (if_type = 0; if_type < MAX_CNIC_ULP_TYPE; if_type++) {
- struct cnic_ulp_ops *ulp_ops;
+ if (if_type == CNIC_ULP_ISCSI)
+ cnic_send_nlmsg(cp, ISCSI_KEVENT_IF_DOWN, NULL);
- mutex_lock(&cnic_lock);
- ulp_ops = rcu_dereference_protected(cp->ulp_ops[if_type],
- lockdep_is_held(&cnic_lock));
- if (!ulp_ops) {
- mutex_unlock(&cnic_lock);
- continue;
- }
- set_bit(ULP_F_CALL_PENDING, &cp->ulp_flags[if_type]);
+ mutex_lock(&cnic_lock);
+ ulp_ops = rcu_dereference_protected(cp->ulp_ops[if_type],
+ lockdep_is_held(&cnic_lock));
+ if (!ulp_ops) {
mutex_unlock(&cnic_lock);
+ return;
+ }
+ set_bit(ULP_F_CALL_PENDING, &cp->ulp_flags[if_type]);
+ mutex_unlock(&cnic_lock);
- if (test_and_clear_bit(ULP_F_START, &cp->ulp_flags[if_type]))
- ulp_ops->cnic_stop(cp->ulp_handle[if_type]);
+ if (test_and_clear_bit(ULP_F_START, &cp->ulp_flags[if_type]))
+ ulp_ops->cnic_stop(cp->ulp_handle[if_type]);
- clear_bit(ULP_F_CALL_PENDING, &cp->ulp_flags[if_type]);
- }
+ clear_bit(ULP_F_CALL_PENDING, &cp->ulp_flags[if_type]);
+}
+
+static void cnic_ulp_stop(struct cnic_dev *dev)
+{
+ struct cnic_local *cp = dev->cnic_priv;
+ int if_type;
+
+ for (if_type = 0; if_type < MAX_CNIC_ULP_TYPE; if_type++)
+ cnic_ulp_stop_one(cp, if_type);
}
static void cnic_ulp_start(struct cnic_dev *dev)
@@ -3039,6 +3044,12 @@ static int cnic_ctl(void *data, struct cnic_ctl_info *info)
cnic_put(dev);
break;
+ case CNIC_CTL_STOP_ISCSI_CMD: {
+ struct cnic_local *cp = dev->cnic_priv;
+ set_bit(CNIC_LCL_FL_STOP_ISCSI, &cp->cnic_local_flags);
+ queue_delayed_work(cnic_wq, &cp->delete_task, 0);
+ break;
+ }
case CNIC_CTL_COMPLETION_CMD: {
u32 cid = BNX2X_SW_CID(info->data.comp.cid);
u32 l5_cid;
@@ -3562,8 +3573,12 @@ static void cnic_init_csk_state(struct cnic_sock *csk)
static int cnic_cm_connect(struct cnic_sock *csk, struct cnic_sockaddr *saddr)
{
+ struct cnic_local *cp = csk->dev->cnic_priv;
int err = 0;
+ if (cp->ethdev->drv_state & CNIC_DRV_STATE_NO_ISCSI)
+ return -EOPNOTSUPP;
+
if (!cnic_in_use(csk))
return -EINVAL;
@@ -3965,6 +3980,17 @@ static void cnic_delete_task(struct work_struct *work)
cp = container_of(work, struct cnic_local, delete_task.work);
dev = cp->dev;
+ if (test_and_clear_bit(CNIC_LCL_FL_STOP_ISCSI, &cp->cnic_local_flags)) {
+ struct drv_ctl_info info;
+
+ rtnl_lock();
+ cnic_ulp_stop_one(cp, CNIC_ULP_ISCSI);
+ rtnl_unlock();
+
+ info.cmd = DRV_CTL_ISCSI_STOPPED_CMD;
+ cp->ethdev->drv_ctl(dev->netdev, &info);
+ }
+
for (i = 0; i < cp->max_cid_space; i++) {
struct cnic_context *ctx = &cp->ctx_tbl[i];
diff --git a/drivers/net/cnic.h b/drivers/net/cnic.h
index 4456260..3367a6d 100644
--- a/drivers/net/cnic.h
+++ b/drivers/net/cnic.h
@@ -226,6 +226,7 @@ struct cnic_local {
#define CNIC_LCL_FL_KWQ_INIT 0x0
#define CNIC_LCL_FL_L2_WAIT 0x1
#define CNIC_LCL_FL_RINGS_INITED 0x2
+#define CNIC_LCL_FL_STOP_ISCSI 0x4
struct cnic_dev *dev;
diff --git a/drivers/net/cnic_if.h b/drivers/net/cnic_if.h
index e01b49e..fdd8e46 100644
--- a/drivers/net/cnic_if.h
+++ b/drivers/net/cnic_if.h
@@ -12,8 +12,8 @@
#ifndef CNIC_IF_H
#define CNIC_IF_H
-#define CNIC_MODULE_VERSION "2.2.13"
-#define CNIC_MODULE_RELDATE "Jan 31, 2011"
+#define CNIC_MODULE_VERSION "2.2.14"
+#define CNIC_MODULE_RELDATE "Mar 30, 2011"
#define CNIC_ULP_RDMA 0
#define CNIC_ULP_ISCSI 1
@@ -85,6 +85,7 @@ struct kcqe {
#define CNIC_CTL_STOP_CMD 1
#define CNIC_CTL_START_CMD 2
#define CNIC_CTL_COMPLETION_CMD 3
+#define CNIC_CTL_STOP_ISCSI_CMD 4
#define DRV_CTL_IO_WR_CMD 0x101
#define DRV_CTL_IO_RD_CMD 0x102
@@ -94,6 +95,7 @@ struct kcqe {
#define DRV_CTL_START_L2_CMD 0x106
#define DRV_CTL_STOP_L2_CMD 0x107
#define DRV_CTL_RET_L2_SPQ_CREDIT_CMD 0x10c
+#define DRV_CTL_ISCSI_STOPPED_CMD 0x10d
struct cnic_ctl_completion {
u32 cid;
--
1.6.4.GIT
next prev parent reply other threads:[~2011-03-31 23:39 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <1301611533-9725-1-git-send-email-mchan@broadcom.com>
2011-03-31 22:45 ` [PATCH net-next 2/3] bnx2x: don't write dcb/llfc fields in STORM memory Michael Chan
2011-03-31 22:45 ` Michael Chan [this message]
2011-04-01 0:06 ` [PATCH net-next 3/3] bnx2x, cnic: Disable iSCSI if DCBX negotiation is successful David Miller
2011-04-01 0:06 ` [PATCH net-next 2/3] bnx2x: don't write dcb/llfc fields in STORM memory David Miller
2011-04-01 0:06 ` [PATCH net-next 1/3] bnx2x: Update firmware to 6.2.9 David Miller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1301611533-9725-3-git-send-email-mchan@broadcom.com \
--to=mchan@broadcom.com \
--cc=davem@davemloft.net \
--cc=dmitry@broadcom.com \
--cc=eilong@broadcom.com \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).