netdev.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
* [PATCH 1/9 net-next-2.6] qlcnic: Make PCI info available in all modes
@ 2011-04-01 22:56 Anirban Chakraborty
  2011-04-02  0:08 ` David Miller
  0 siblings, 1 reply; 10+ messages in thread
From: Anirban Chakraborty @ 2011-04-01 22:56 UTC (permalink / raw)
  To: David Miller
  Cc: netdev, Dept_NX_Linux_NIC_Driver, Sony Chacko,
	Anirban Chakraborty

From: Sony Chacko <sony.chacko@qlogic.com>

Before this fix, PCI info was available only when multiple NIC functions
are present on the same port.

Signed-off-by: Sony Chacko <sony.chacko@qlogic.com>
Signed-off-by: Anirban Chakraborty <anirban.chakraborty@qlogic.com>
---
 drivers/net/qlcnic/qlcnic_main.c |    6 +++---
 1 files changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/net/qlcnic/qlcnic_main.c b/drivers/net/qlcnic/qlcnic_main.c
index cd88c7e..d230fdd 100644
--- a/drivers/net/qlcnic/qlcnic_main.c
+++ b/drivers/net/qlcnic/qlcnic_main.c
@@ -3954,14 +3954,14 @@ qlcnic_create_diag_entries(struct qlcnic_adapter *adapter)
                dev_info(dev, "failed to create crb sysfs entry\n");
        if (device_create_bin_file(dev, &bin_attr_mem))
                dev_info(dev, "failed to create mem sysfs entry\n");
+       if (device_create_bin_file(dev, &bin_attr_pci_config))
+               dev_info(dev, "failed to create pci config sysfs entry");
        if (!(adapter->flags & QLCNIC_ESWITCH_ENABLED))
                return;
        if (device_create_bin_file(dev, &bin_attr_esw_config))
                dev_info(dev, "failed to create esw config sysfs entry");
        if (adapter->op_mode != QLCNIC_MGMT_FUNC)
                return;
-       if (device_create_bin_file(dev, &bin_attr_pci_config))
-               dev_info(dev, "failed to create pci config sysfs entry");
        if (device_create_bin_file(dev, &bin_attr_npar_config))
                dev_info(dev, "failed to create npar config sysfs entry");
        if (device_create_bin_file(dev, &bin_attr_pm_config))
@@ -3982,12 +3982,12 @@ qlcnic_remove_diag_entries(struct qlcnic_adapter *adapter)
        device_remove_file(dev, &dev_attr_diag_mode);
        device_remove_bin_file(dev, &bin_attr_crb);
        device_remove_bin_file(dev, &bin_attr_mem);
+       device_remove_bin_file(dev, &bin_attr_pci_config);
        if (!(adapter->flags & QLCNIC_ESWITCH_ENABLED))
                return;
        device_remove_bin_file(dev, &bin_attr_esw_config);
        if (adapter->op_mode != QLCNIC_MGMT_FUNC)
                return;
-       device_remove_bin_file(dev, &bin_attr_pci_config);
        device_remove_bin_file(dev, &bin_attr_npar_config);
        device_remove_bin_file(dev, &bin_attr_pm_config);
        device_remove_bin_file(dev, &bin_attr_esw_stats);
--
1.7.1


This message and any attached documents contain information from QLogic Corporation or its wholly-owned subsidiaries that may be confidential. If you are not the intended recipient, you may not read, copy, distribute, or use this information. If you have received this transmission in error, please notify the sender immediately by reply e-mail and then delete this message.


^ permalink raw reply related	[flat|nested] 10+ messages in thread
* [PATCH 1/9 net-next-2.6] qlcnic: Make PCI info available in all modes
@ 2011-04-02  0:27 anirban.chakraborty
  2011-04-02  1:18 ` David Miller
  0 siblings, 1 reply; 10+ messages in thread
From: anirban.chakraborty @ 2011-04-02  0:27 UTC (permalink / raw)
  To: davem; +Cc: netdev, amit.salecha, ameen.rahman, Sony Chacko

From: Sony Chacko <sony.chacko@qlogic.com>

Before this fix, PCI info was available only when multiple NIC functions
are present on the same port.

Signed-off-by: Sony Chacko <sony.chacko@qlogic.com>
Signed-off-by: Anirban Chakraborty <anirban.chakraborty@qlogic.com>
---
 drivers/net/qlcnic/qlcnic_main.c |    6 +++---
 1 files changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/net/qlcnic/qlcnic_main.c b/drivers/net/qlcnic/qlcnic_main.c
index cd88c7e..d230fdd 100644
--- a/drivers/net/qlcnic/qlcnic_main.c
+++ b/drivers/net/qlcnic/qlcnic_main.c
@@ -3954,14 +3954,14 @@ qlcnic_create_diag_entries(struct qlcnic_adapter *adapter)
 		dev_info(dev, "failed to create crb sysfs entry\n");
 	if (device_create_bin_file(dev, &bin_attr_mem))
 		dev_info(dev, "failed to create mem sysfs entry\n");
+	if (device_create_bin_file(dev, &bin_attr_pci_config))
+		dev_info(dev, "failed to create pci config sysfs entry");
 	if (!(adapter->flags & QLCNIC_ESWITCH_ENABLED))
 		return;
 	if (device_create_bin_file(dev, &bin_attr_esw_config))
 		dev_info(dev, "failed to create esw config sysfs entry");
 	if (adapter->op_mode != QLCNIC_MGMT_FUNC)
 		return;
-	if (device_create_bin_file(dev, &bin_attr_pci_config))
-		dev_info(dev, "failed to create pci config sysfs entry");
 	if (device_create_bin_file(dev, &bin_attr_npar_config))
 		dev_info(dev, "failed to create npar config sysfs entry");
 	if (device_create_bin_file(dev, &bin_attr_pm_config))
@@ -3982,12 +3982,12 @@ qlcnic_remove_diag_entries(struct qlcnic_adapter *adapter)
 	device_remove_file(dev, &dev_attr_diag_mode);
 	device_remove_bin_file(dev, &bin_attr_crb);
 	device_remove_bin_file(dev, &bin_attr_mem);
+	device_remove_bin_file(dev, &bin_attr_pci_config);
 	if (!(adapter->flags & QLCNIC_ESWITCH_ENABLED))
 		return;
 	device_remove_bin_file(dev, &bin_attr_esw_config);
 	if (adapter->op_mode != QLCNIC_MGMT_FUNC)
 		return;
-	device_remove_bin_file(dev, &bin_attr_pci_config);
 	device_remove_bin_file(dev, &bin_attr_npar_config);
 	device_remove_bin_file(dev, &bin_attr_pm_config);
 	device_remove_bin_file(dev, &bin_attr_esw_stats);
-- 
1.7.1


^ permalink raw reply related	[flat|nested] 10+ messages in thread
* [PATCH 1/9 net-next-2.6] qlcnic: Make PCI info available in all modes
@ 2011-04-02  0:07 anirban.chakraborty
  0 siblings, 0 replies; 10+ messages in thread
From: anirban.chakraborty @ 2011-04-02  0:07 UTC (permalink / raw)
  To: netdev; +Cc: davem, Dept_NX_Linux_NIC_driver, Sony Chacko

From: Sony Chacko <sony.chacko@qlogic.com>

Before this fix, PCI info was available only when multiple NIC functions
are present on the same port.

Signed-off-by: Sony Chacko <sony.chacko@qlogic.com>
Signed-off-by: Anirban Chakraborty <anirban.chakraborty@qlogic.com>
---
 drivers/net/qlcnic/qlcnic_main.c |    6 +++---
 1 files changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/net/qlcnic/qlcnic_main.c b/drivers/net/qlcnic/qlcnic_main.c
index cd88c7e..d230fdd 100644
--- a/drivers/net/qlcnic/qlcnic_main.c
+++ b/drivers/net/qlcnic/qlcnic_main.c
@@ -3954,14 +3954,14 @@ qlcnic_create_diag_entries(struct qlcnic_adapter *adapter)
 		dev_info(dev, "failed to create crb sysfs entry\n");
 	if (device_create_bin_file(dev, &bin_attr_mem))
 		dev_info(dev, "failed to create mem sysfs entry\n");
+	if (device_create_bin_file(dev, &bin_attr_pci_config))
+		dev_info(dev, "failed to create pci config sysfs entry");
 	if (!(adapter->flags & QLCNIC_ESWITCH_ENABLED))
 		return;
 	if (device_create_bin_file(dev, &bin_attr_esw_config))
 		dev_info(dev, "failed to create esw config sysfs entry");
 	if (adapter->op_mode != QLCNIC_MGMT_FUNC)
 		return;
-	if (device_create_bin_file(dev, &bin_attr_pci_config))
-		dev_info(dev, "failed to create pci config sysfs entry");
 	if (device_create_bin_file(dev, &bin_attr_npar_config))
 		dev_info(dev, "failed to create npar config sysfs entry");
 	if (device_create_bin_file(dev, &bin_attr_pm_config))
@@ -3982,12 +3982,12 @@ qlcnic_remove_diag_entries(struct qlcnic_adapter *adapter)
 	device_remove_file(dev, &dev_attr_diag_mode);
 	device_remove_bin_file(dev, &bin_attr_crb);
 	device_remove_bin_file(dev, &bin_attr_mem);
+	device_remove_bin_file(dev, &bin_attr_pci_config);
 	if (!(adapter->flags & QLCNIC_ESWITCH_ENABLED))
 		return;
 	device_remove_bin_file(dev, &bin_attr_esw_config);
 	if (adapter->op_mode != QLCNIC_MGMT_FUNC)
 		return;
-	device_remove_bin_file(dev, &bin_attr_pci_config);
 	device_remove_bin_file(dev, &bin_attr_npar_config);
 	device_remove_bin_file(dev, &bin_attr_pm_config);
 	device_remove_bin_file(dev, &bin_attr_esw_stats);
-- 
1.7.1


^ permalink raw reply related	[flat|nested] 10+ messages in thread
* [PATCH 1/9 net-next-2.6] qlcnic: make PCI info available in all modes
@ 2011-03-30 20:21 Anirban Chakraborty
  2011-03-31  4:40 ` David Miller
  0 siblings, 1 reply; 10+ messages in thread
From: Anirban Chakraborty @ 2011-03-30 20:21 UTC (permalink / raw)
  To: David Miller, netdev@vger.kernel.org; +Cc: Dept_NX_Linux_NIC_Driver

From: Sony Chacko <sony.chacko@qlogic.com>

Before this fix, PCI info was available only when multiple NIC functions were
present on a port.

Signed-off-by: Sony Chacko <sony.chacko@qlogic.com>
Signed-off-by: Anirban Chakraborty <anirban.chakraborty@qlogic.com>
---
 drivers/net/qlcnic/qlcnic_main.c |    6 +++---
 1 files changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/net/qlcnic/qlcnic_main.c b/drivers/net/qlcnic/qlcnic_main.c
index cd88c7e..d230fdd 100644
--- a/drivers/net/qlcnic/qlcnic_main.c
+++ b/drivers/net/qlcnic/qlcnic_main.c
@@ -3954,14 +3954,14 @@ qlcnic_create_diag_entries(struct qlcnic_adapter *adapter)
                dev_info(dev, "failed to create crb sysfs entry\n");
        if (device_create_bin_file(dev, &bin_attr_mem))
                dev_info(dev, "failed to create mem sysfs entry\n");
+       if (device_create_bin_file(dev, &bin_attr_pci_config))
+               dev_info(dev, "failed to create pci config sysfs entry");
        if (!(adapter->flags & QLCNIC_ESWITCH_ENABLED))
                return;
        if (device_create_bin_file(dev, &bin_attr_esw_config))
                dev_info(dev, "failed to create esw config sysfs entry");
        if (adapter->op_mode != QLCNIC_MGMT_FUNC)
                return;
-       if (device_create_bin_file(dev, &bin_attr_pci_config))
-               dev_info(dev, "failed to create pci config sysfs entry");
        if (device_create_bin_file(dev, &bin_attr_npar_config))
                dev_info(dev, "failed to create npar config sysfs entry");
        if (device_create_bin_file(dev, &bin_attr_pm_config))
@@ -3982,12 +3982,12 @@ qlcnic_remove_diag_entries(struct qlcnic_adapter *adapter)
        device_remove_file(dev, &dev_attr_diag_mode);
        device_remove_bin_file(dev, &bin_attr_crb);
        device_remove_bin_file(dev, &bin_attr_mem);
+       device_remove_bin_file(dev, &bin_attr_pci_config);
        if (!(adapter->flags & QLCNIC_ESWITCH_ENABLED))
                return;
        device_remove_bin_file(dev, &bin_attr_esw_config);
        if (adapter->op_mode != QLCNIC_MGMT_FUNC)
                return;
-       device_remove_bin_file(dev, &bin_attr_pci_config);
        device_remove_bin_file(dev, &bin_attr_npar_config);
        device_remove_bin_file(dev, &bin_attr_pm_config);
        device_remove_bin_file(dev, &bin_attr_esw_stats);
--
1.6.5.2


This message and any attached documents contain information from QLogic Corporation or its wholly-owned subsidiaries that may be confidential. If you are not the intended recipient, you may not read, copy, distribute, or use this information. If you have received this transmission in error, please notify the sender immediately by reply e-mail and then delete this message.


^ permalink raw reply related	[flat|nested] 10+ messages in thread

end of thread, other threads:[~2011-04-02  2:15 UTC | newest]

Thread overview: 10+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2011-04-01 22:56 [PATCH 1/9 net-next-2.6] qlcnic: Make PCI info available in all modes Anirban Chakraborty
2011-04-02  0:08 ` David Miller
  -- strict thread matches above, loose matches on Subject: below --
2011-04-02  0:27 anirban.chakraborty
2011-04-02  1:18 ` David Miller
2011-04-02  1:20   ` David Miller
2011-04-02  2:14     ` Anirban Chakraborty
2011-04-02  0:07 anirban.chakraborty
2011-03-30 20:21 [PATCH 1/9 net-next-2.6] qlcnic: make " Anirban Chakraborty
2011-03-31  4:40 ` David Miller
2011-03-31 17:04   ` Anirban Chakraborty

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).