netdev.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
To: davem@davemloft.net
Cc: Emil Tantilov <emil.s.tantilov@intel.com>,
	netdev@vger.kernel.org, gospo@redhat.com, bphilips@novell.com,
	Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Subject: [net-next-2.6 16/24] ixgbe: move disabling of relaxed ordering in start_hw()
Date: Wed, 13 Apr 2011 18:02:12 -0700	[thread overview]
Message-ID: <1302742940-22141-17-git-send-email-jeffrey.t.kirsher@intel.com> (raw)
In-Reply-To: <1302742940-22141-1-git-send-email-jeffrey.t.kirsher@intel.com>

From: Emil Tantilov <emil.s.tantilov@intel.com>

Relaxed ordering can lead to issues with some chipsets.

This patch makes sure that it is disabled by default and
not only when DCA is on.

Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com>
Tested-by: Evan Swanson <evan.swanson@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ixgbe/ixgbe_82598.c  |   21 ++++++++++++++++++++-
 drivers/net/ixgbe/ixgbe_common.c |   15 +++++++++++++++
 drivers/net/ixgbe/ixgbe_main.c   |    4 ----
 3 files changed, 35 insertions(+), 5 deletions(-)

diff --git a/drivers/net/ixgbe/ixgbe_82598.c b/drivers/net/ixgbe/ixgbe_82598.c
index c9b6574..a93275f 100644
--- a/drivers/net/ixgbe/ixgbe_82598.c
+++ b/drivers/net/ixgbe/ixgbe_82598.c
@@ -197,14 +197,33 @@ out:
  *  @hw: pointer to hardware structure
  *
  *  Starts the hardware using the generic start_hw function.
- *  Then set pcie completion timeout
+ *  Disables relaxed ordering Then set pcie completion timeout
+ *
  **/
 static s32 ixgbe_start_hw_82598(struct ixgbe_hw *hw)
 {
+	u32 regval;
+	u32 i;
 	s32 ret_val = 0;
 
 	ret_val = ixgbe_start_hw_generic(hw);
 
+	/* Disable relaxed ordering */
+	for (i = 0; ((i < hw->mac.max_tx_queues) &&
+	     (i < IXGBE_DCA_MAX_QUEUES_82598)); i++) {
+		regval = IXGBE_READ_REG(hw, IXGBE_DCA_TXCTRL(i));
+		regval &= ~IXGBE_DCA_TXCTRL_TX_WB_RO_EN;
+		IXGBE_WRITE_REG(hw, IXGBE_DCA_TXCTRL(i), regval);
+	}
+
+	for (i = 0; ((i < hw->mac.max_rx_queues) &&
+	     (i < IXGBE_DCA_MAX_QUEUES_82598)); i++) {
+		regval = IXGBE_READ_REG(hw, IXGBE_DCA_RXCTRL(i));
+		regval &= ~(IXGBE_DCA_RXCTRL_DESC_WRO_EN |
+			    IXGBE_DCA_RXCTRL_DESC_HSRO_EN);
+		IXGBE_WRITE_REG(hw, IXGBE_DCA_RXCTRL(i), regval);
+	}
+
 	/* set the completion timeout for interface */
 	if (ret_val == 0)
 		ixgbe_set_pcie_completion_timeout(hw);
diff --git a/drivers/net/ixgbe/ixgbe_common.c b/drivers/net/ixgbe/ixgbe_common.c
index c66fd95..1b8b3cd 100644
--- a/drivers/net/ixgbe/ixgbe_common.c
+++ b/drivers/net/ixgbe/ixgbe_common.c
@@ -108,6 +108,7 @@ s32 ixgbe_start_hw_generic(struct ixgbe_hw *hw)
 s32 ixgbe_start_hw_gen2(struct ixgbe_hw *hw)
 {
 	u32 i;
+	u32 regval;
 
 	/* Clear the rate limiters */
 	for (i = 0; i < hw->mac.max_tx_queues; i++) {
@@ -116,6 +117,20 @@ s32 ixgbe_start_hw_gen2(struct ixgbe_hw *hw)
 	}
 	IXGBE_WRITE_FLUSH(hw);
 
+	/* Disable relaxed ordering */
+	for (i = 0; i < hw->mac.max_tx_queues; i++) {
+		regval = IXGBE_READ_REG(hw, IXGBE_DCA_TXCTRL_82599(i));
+		regval &= ~IXGBE_DCA_TXCTRL_TX_WB_RO_EN;
+		IXGBE_WRITE_REG(hw, IXGBE_DCA_TXCTRL_82599(i), regval);
+	}
+
+	for (i = 0; i < hw->mac.max_rx_queues; i++) {
+		regval = IXGBE_READ_REG(hw, IXGBE_DCA_RXCTRL(i));
+		regval &= ~(IXGBE_DCA_RXCTRL_DESC_WRO_EN |
+					IXGBE_DCA_RXCTRL_DESC_HSRO_EN);
+		IXGBE_WRITE_REG(hw, IXGBE_DCA_RXCTRL(i), regval);
+	}
+
 	return 0;
 }
 
diff --git a/drivers/net/ixgbe/ixgbe_main.c b/drivers/net/ixgbe/ixgbe_main.c
index 3dbe689..3148e21 100644
--- a/drivers/net/ixgbe/ixgbe_main.c
+++ b/drivers/net/ixgbe/ixgbe_main.c
@@ -947,8 +947,6 @@ static void ixgbe_update_rx_dca(struct ixgbe_adapter *adapter,
 	rxctrl |= IXGBE_DCA_RXCTRL_DESC_DCA_EN;
 	rxctrl |= IXGBE_DCA_RXCTRL_HEAD_DCA_EN;
 	rxctrl &= ~(IXGBE_DCA_RXCTRL_DESC_RRO_EN);
-	rxctrl &= ~(IXGBE_DCA_RXCTRL_DESC_WRO_EN |
-		    IXGBE_DCA_RXCTRL_DESC_HSRO_EN);
 	IXGBE_WRITE_REG(hw, IXGBE_DCA_RXCTRL(reg_idx), rxctrl);
 }
 
@@ -966,7 +964,6 @@ static void ixgbe_update_tx_dca(struct ixgbe_adapter *adapter,
 		txctrl &= ~IXGBE_DCA_TXCTRL_CPUID_MASK;
 		txctrl |= dca3_get_tag(&adapter->pdev->dev, cpu);
 		txctrl |= IXGBE_DCA_TXCTRL_DESC_DCA_EN;
-		txctrl &= ~IXGBE_DCA_TXCTRL_TX_WB_RO_EN;
 		IXGBE_WRITE_REG(hw, IXGBE_DCA_TXCTRL(reg_idx), txctrl);
 		break;
 	case ixgbe_mac_82599EB:
@@ -976,7 +973,6 @@ static void ixgbe_update_tx_dca(struct ixgbe_adapter *adapter,
 		txctrl |= (dca3_get_tag(&adapter->pdev->dev, cpu) <<
 			   IXGBE_DCA_TXCTRL_CPUID_SHIFT_82599);
 		txctrl |= IXGBE_DCA_TXCTRL_DESC_DCA_EN;
-		txctrl &= ~IXGBE_DCA_TXCTRL_TX_WB_RO_EN;
 		IXGBE_WRITE_REG(hw, IXGBE_DCA_TXCTRL_82599(reg_idx), txctrl);
 		break;
 	default:
-- 
1.7.4.2


  parent reply	other threads:[~2011-04-14  1:02 UTC|newest]

Thread overview: 27+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2011-04-14  1:01 [net-next-2.6 00/26][pull request] Intel Wired LAN Driver Update Jeff Kirsher
2011-04-14  1:01 ` [net-next-2.6 01/24] igb: Add anti-spoofing feature documentation Jeff Kirsher
2011-04-14  1:01 ` [net-next-2.6 02/24] igb: fix typo in igb_validate_nvm_checksum_82580 Jeff Kirsher
2011-04-14  1:01 ` [net-next-2.6 03/24] igb: introduce igb_thermal_sensor_event for sensor checking Jeff Kirsher
2011-04-14  1:02 ` [net-next-2.6 04/24] e1000: convert to set_phys_id Jeff Kirsher
2011-04-14  1:12   ` Allan, Bruce W
2011-04-14  1:18     ` Jeff Kirsher
2011-04-14  1:02 ` [net-next-2.6 05/24] e1000e: convert short duration msleep() to usleep_range() Jeff Kirsher
2011-04-14  1:02 ` [net-next-2.6 06/24] e1000e: PCIe link speed in GT/s, not GB/s Jeff Kirsher
2011-04-14  1:02 ` [net-next-2.6 07/24] e1000e: convert to new VLAN model Jeff Kirsher
2011-04-14  1:02 ` [net-next-2.6 08/24] e1000e: fix stats locking in e1000_watchdog_task Jeff Kirsher
2011-04-14  1:02 ` [net-next-2.6 09/24] e1000e: If ASPM L0s needs to be disabled, do it prior to enabling device Jeff Kirsher
2011-04-14  1:02 ` [net-next-2.6 10/24] ixgbe: DCB, further cleanups to app configuration Jeff Kirsher
2011-04-14  1:02 ` [net-next-2.6 11/24] ixgbe: fix return value checks Jeff Kirsher
2011-04-14  1:02 ` [net-next-2.6 12/24] ixgbe: correct function number for some 82598 parts Jeff Kirsher
2011-04-14  1:02 ` [net-next-2.6 13/24] ixgbe: fix namespacecheck issue Jeff Kirsher
2011-04-14  1:02 ` [net-next-2.6 14/24] ixgbe: update version string for Dell CEM use Jeff Kirsher
2011-04-14  1:02 ` [net-next-2.6 15/24] ixgbe: refactor common start_hw code for 82599 and x540 Jeff Kirsher
2011-04-14  1:02 ` Jeff Kirsher [this message]
2011-04-14  1:02 ` [net-next-2.6 17/24] ixgbe: fix 82599 KR downshift coexistence with LESM FW module Jeff Kirsher
2011-04-14  1:02 ` [net-next-2.6 18/24] ixgbe: cleanup short msleep's (<20ms) to use usleep_range Jeff Kirsher
2011-04-14  1:02 ` [net-next-2.6 19/24] ixgbe: fix semaphores in eeprom routines for x540 Jeff Kirsher
2011-04-14  1:02 ` [net-next-2.6 20/24] ixgbe: add support for new HW Jeff Kirsher
2011-04-14  1:02 ` [net-next-2.6 21/24] ixgbe: explicitly disable 100H for x540 Jeff Kirsher
2011-04-14  1:02 ` [net-next-2.6 22/24] ixgbe: make device_caps() generic Jeff Kirsher
2011-04-14  1:02 ` [net-next-2.6 23/24] ixgbe: DCB, misallocated packet buffer size with X540 device Jeff Kirsher
2011-04-14  1:02 ` [net-next-2.6 24/24] ixgbe: DCB, X540 devices do not respond to pause frames Jeff Kirsher

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1302742940-22141-17-git-send-email-jeffrey.t.kirsher@intel.com \
    --to=jeffrey.t.kirsher@intel.com \
    --cc=bphilips@novell.com \
    --cc=davem@davemloft.net \
    --cc=emil.s.tantilov@intel.com \
    --cc=gospo@redhat.com \
    --cc=netdev@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).