netdev.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Rick Jones <rick.jones2@hp.com>
To: Ben Greear <greearb@candelatech.com>
Cc: Stephen Hemminger <shemminger@vyatta.com>,
	netdev <netdev@vger.kernel.org>
Subject: Re: TCP funny-ness when over-driving a 1Gbps link.
Date: Thu, 19 May 2011 17:05:40 -0700	[thread overview]
Message-ID: <1305849940.8149.1122.camel@tardy> (raw)
In-Reply-To: <4DD5AAFC.8070509@candelatech.com>

On Thu, 2011-05-19 at 16:42 -0700, Ben Greear wrote:
> On 05/19/2011 04:20 PM, Ben Greear wrote:
> > On 05/19/2011 04:18 PM, Stephen Hemminger wrote:
> 
> >> If you overdrive, TCP expects your network emulator to have
> >> a some but limited queueing (like a real router).
> >
> > The emulator is fine, it's not being over-driven (and has limited
> > queueing if it was
> > being over-driven). The queues that are backing up are in the tcp
> > sockets on the
> > sending machine.
> >
> > But, just to make sure, I'll re-run the test with a looped back cable...
> 
> Well, with looped back cable, it isn't so bad.  I still see a small drop
> in aggregate throughput (around 900Mbps instead of 950Mbps), and
> latency goes above 600ms, but it still performs better than when
> going through the emulator.
> 
> At 950+Mbps, the emulator is going to impart 1-2 ms of latency
> even when configured for wide-open.
> 
> If I use a bridge in place of the emulator, it seems to settle on
> around 450Mbps in one direction and 945Mbps in the other (on the wire),
> with round-trip latencies often over 5 seconds (user-space to user-space),
> and a consistent large chunk of data in the socket send buffers:
> 
> [root@i7-965-1 igb]# netstat -an|grep tcp|grep 8.1.1
> tcp        0      0 8.1.1.1:33038               0.0.0.0:*                   LISTEN
> tcp        0      0 8.1.1.1:33040               0.0.0.0:*                   LISTEN
> tcp        0      0 8.1.1.1:33042               0.0.0.0:*                   LISTEN
> tcp        0 9328612 8.1.1.2:33039               8.1.1.1:33040               ESTABLISHED
> tcp        0 17083176 8.1.1.1:33038               8.1.1.2:33037               ESTABLISHED
> tcp        0 9437340 8.1.1.2:33037               8.1.1.1:33038               ESTABLISHED
> tcp        0 17024620 8.1.1.1:33040               8.1.1.2:33039               ESTABLISHED
> tcp        0 19557040 8.1.1.1:33042               8.1.1.2:33041               ESTABLISHED
> tcp        0 9416600 8.1.1.2:33041               8.1.1.1:33042               ESTABLISHED

I take it your system has higher values for the tcp_wmem value:

net.ipv4.tcp_wmem = 4096 16384 4194304

and whatever is creating the TCP connections is not making explicit
setsockopt() calls to set SO_*BUF.

rick jones


  reply	other threads:[~2011-05-20  0:05 UTC|newest]

Thread overview: 12+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2011-05-19 22:47 TCP funny-ness when over-driving a 1Gbps link Ben Greear
2011-05-19 23:18 ` Stephen Hemminger
2011-05-19 23:20   ` Ben Greear
2011-05-19 23:42     ` Ben Greear
2011-05-20  0:05       ` Rick Jones [this message]
2011-05-20  0:12         ` Ben Greear
2011-05-20  0:24           ` Rick Jones
2011-05-20  0:37             ` Ben Greear
2011-05-20  0:46               ` Rick Jones
2011-05-20  3:39                 ` Ben Greear
2011-05-20 21:33                   ` TCP funny-ness when over-driving a 1Gbps link (and wifi) Ben Greear
2011-05-26 15:28                     ` Chris Friesen

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1305849940.8149.1122.camel@tardy \
    --to=rick.jones2@hp.com \
    --cc=greearb@candelatech.com \
    --cc=netdev@vger.kernel.org \
    --cc=shemminger@vyatta.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).