From: Chetan Loke <loke.chetan@gmail.com>
To: netdev@vger.kernel.org
Cc: davem@davemloft.net, eric.dumazet@gmail.com, kaber@trash.net,
johann.baudy@gnu-log.net, Chetan Loke <loke.chetan@gmail.com>,
Chetan Loke <lokec@ccs.neu.edu>
Subject: [af-packet 1/2] Enhance af-packet to provide (near zero)lossless packet capture functionality.
Date: Tue, 7 Jun 2011 23:13:05 -0400 [thread overview]
Message-ID: <1307502786-1396-2-git-send-email-loke.chetan@gmail.com> (raw)
In-Reply-To: <1307502786-1396-1-git-send-email-loke.chetan@gmail.com>
Added TPACKET_V3 definitions
Signed-off-by: Chetan Loke <lokec@ccs.neu.edu>
---
include/linux/if_packet.h | 127 ++++++++++++++++++++++++++++++++++++++++++++-
1 files changed, 126 insertions(+), 1 deletions(-)
diff --git a/include/linux/if_packet.h b/include/linux/if_packet.h
index 72bfa5a..9e4eea1 100644
--- a/include/linux/if_packet.h
+++ b/include/linux/if_packet.h
@@ -24,7 +24,7 @@ struct sockaddr_ll {
#define PACKET_HOST 0 /* To us */
#define PACKET_BROADCAST 1 /* To all */
#define PACKET_MULTICAST 2 /* To group */
-#define PACKET_OTHERHOST 3 /* To someone else */
+#define PACKET_OTHERHOST 3 /* To someone else */
#define PACKET_OUTGOING 4 /* Outgoing of any type */
/* These ones are invisible by user level */
#define PACKET_LOOPBACK 5 /* MC/BRD frame looped back */
@@ -55,6 +55,17 @@ struct tpacket_stats {
unsigned int tp_drops;
};
+struct tpacket_stats_v3 {
+ unsigned int tp_packets;
+ unsigned int tp_drops;
+ unsigned int tp_freeze_q_cnt;
+};
+
+union tpacket_stats_u {
+ struct tpacket_stats stats1;
+ struct tpacket_stats_v3 stats3;
+};
+
struct tpacket_auxdata {
__u32 tp_status;
__u32 tp_len;
@@ -70,6 +81,7 @@ struct tpacket_auxdata {
#define TP_STATUS_COPY 0x2
#define TP_STATUS_LOSING 0x4
#define TP_STATUS_CSUMNOTREADY 0x8
+#define TP_STATUS_BLK_TMO 0x10
/* Tx ring - header status */
#define TP_STATUS_AVAILABLE 0x0
@@ -102,11 +114,111 @@ struct tpacket2_hdr {
__u16 tp_vlan_tci;
};
+struct tpacket3_hdr {
+ __u32 tp_status;
+ __u32 tp_len;
+ __u32 tp_snaplen;
+ __u16 tp_mac;
+ __u16 tp_net;
+ __u32 tp_sec;
+ __u32 tp_nsec;
+ __u16 tp_vlan_tci;
+ __u32 tp_next_offset;
+};
+
+struct bd_ts {
+ unsigned int ts_sec;
+ union {
+ struct {
+ unsigned int ts_usec;
+ };
+ struct {
+ unsigned int ts_nsec;
+ };
+ };
+} __attribute__ ((__packed__));
+
+struct bd_v1 {
+ /*
+ * If you re-order the first 5 fields then
+ * the BLOCK_XXX macros will NOT work.
+ */
+ __u32 block_status;
+ __u32 num_pkts;
+ __u32 offset_to_first_pkt;
+
+ /* Number of valid bytes (including padding)
+ * blk_len <= tp_block_size
+ */
+ __u32 blk_len;
+
+ /*
+ * Quite a few uses of sequence number:
+ * 1. Make sure cache flush etc worked.
+ * Well, one can argue - why not use the increasing ts below?
+ * But look at 2. below first.
+ * 2. When you pass around blocks to other user space decoders,
+ * you can see which blk[s] is[are] outstanding etc.
+ * 3. Validate kernel code.
+ */
+ __u64 seq_num;
+
+ /*
+ * ts_last_pkt:
+ *
+ * Case 1. Block has 'N'(N >=1) packets and TMO'd(timed out)
+ * ts_last_pkt == 'time-stamp of last packet' and NOT the
+ * time when the timer fired and the block was closed.
+ * By providing the ts of the last packet we can absolutely
+ * guarantee that time-stamp wise, the first packet in the next
+ * block will never precede the last packet of the previous
+ * block.
+ * Case 2. Block has zero packets and TMO'd
+ * ts_last_pkt = time when the timer fired and the block
+ * was closed.
+ * Case 3. Block has 'N' packets and NO TMO.
+ * ts_last_pkt = time-stamp of the last pkt in the block.
+ *
+ * ts_first_pkt:
+ * Is always the time-stamp when the block was opened.
+ * Case a) ZERO packets
+ * No packets to deal with but atleast you know the
+ * time-interval of this block.
+ * Case b) Non-zero packets
+ * Use the ts of the first packet in the block.
+ *
+ */
+ struct bd_ts ts_first_pkt;
+ struct bd_ts ts_last_pkt;
+} __attribute__ ((__packed__));
+
+struct block_desc {
+ __u16 version;
+ union {
+ struct {
+ __u32 words[4];
+ __u64 dword;
+ } __attribute__ ((__packed__));
+ struct bd_v1 bd1;
+ };
+} __attribute__ ((__packed__));
+
+
+
#define TPACKET2_HDRLEN (TPACKET_ALIGN(sizeof(struct tpacket2_hdr)) + sizeof(struct sockaddr_ll))
+#define TPACKET3_HDRLEN (TPACKET_ALIGN(sizeof(struct tpacket3_hdr)) + sizeof(struct sockaddr_ll))
+
+#define BLOCK_STATUS(x) ((x)->words[0])
+#define BLOCK_NUM_PKTS(x) ((x)->words[1])
+#define BLOCK_O2FP(x) ((x)->words[2])
+#define BLOCK_LEN(x) ((x)->words[3])
+#define BLOCK_SNUM(x) ((x)->dword)
+
enum tpacket_versions {
TPACKET_V1,
TPACKET_V2,
+ TPACKET_V3,
};
/*
@@ -129,6 +241,19 @@ struct tpacket_req {
unsigned int tp_frame_nr; /* Total number of frames */
};
+struct tpacket_req3 {
+ unsigned int tp_block_size; /* Minimal size of contiguous block */
+ unsigned int tp_block_nr; /* Number of blocks */
+ unsigned int tp_frame_size; /* Size of frame */
+ unsigned int tp_frame_nr; /* Total number of frames */
+ unsigned int tp_retire_blk_tov; /* timeout in msecs */
+};
+
+union tpacket_req_u {
+ struct tpacket_req req;
+ struct tpacket_req3 req3;
+};
+
struct packet_mreq {
int mr_ifindex;
unsigned short mr_type;
--
1.7.5.2
next prev parent reply other threads:[~2011-06-08 3:13 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-06-08 3:13 [af-packet 0/2] Enhance af-packet to provide (near zero)lossless packet capture functionality Chetan Loke
2011-06-08 3:13 ` Chetan Loke [this message]
2011-06-08 4:35 ` [af-packet 1/2] " Eric Dumazet
2011-06-08 22:10 ` chetan loke
2011-06-08 22:22 ` Eric Dumazet
2011-06-08 16:03 ` Stephen Hemminger
2011-06-08 3:13 ` [af-packet 2/2] " Chetan Loke
2011-06-08 4:18 ` Joe Perches
2011-06-08 22:01 ` chetan loke
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1307502786-1396-2-git-send-email-loke.chetan@gmail.com \
--to=loke.chetan@gmail.com \
--cc=davem@davemloft.net \
--cc=eric.dumazet@gmail.com \
--cc=johann.baudy@gnu-log.net \
--cc=kaber@trash.net \
--cc=lokec@ccs.neu.edu \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).