From: Rasesh Mody <rmody@brocade.com>
To: <davem@davemloft.net>, <netdev@vger.kernel.org>
Cc: <adapter_linux_open_src_team@brocade.com>, <dradovan@brocade.com>,
Rasesh Mody <rmody@brocade.com>
Subject: [PATCH 40/45] bna: Add IOC MBOX Call Back to Client
Date: Mon, 18 Jul 2011 01:23:00 -0700 [thread overview]
Message-ID: <1310977385-5268-30-git-send-email-rmody@brocade.com> (raw)
In-Reply-To: <1310977385-5268-1-git-send-email-rmody@brocade.com>
Change deatils:
- Give a callback to the client indicating that the command is sent
- Removed a typecast
- When done with IOC detach we empty the notify_q.
Signed-off-by: Rasesh Mody <rmody@brocade.com>
---
drivers/net/bna/bfa_ioc.c | 24 ++++++++++++++++++------
drivers/net/bna/bfi.h | 17 +++++++++--------
2 files changed, 27 insertions(+), 14 deletions(-)
diff --git a/drivers/net/bna/bfa_ioc.c b/drivers/net/bna/bfa_ioc.c
index e612ca4..b086cd7 100644
--- a/drivers/net/bna/bfa_ioc.c
+++ b/drivers/net/bna/bfa_ioc.c
@@ -1768,7 +1768,9 @@ bfa_ioc_mbox_poll(struct bfa_ioc *ioc)
{
struct bfa_ioc_mbox_mod *mod = &ioc->mbox_mod;
struct bfa_mbox_cmd *cmd;
- u32 stat;
+ bfa_mbox_cmd_cbfn_t cbfn;
+ void *cbarg;
+ u32 stat;
/**
* If no command pending, do nothing
@@ -1788,6 +1790,16 @@ bfa_ioc_mbox_poll(struct bfa_ioc *ioc)
*/
bfa_q_deq(&mod->cmd_q, &cmd);
bfa_ioc_mbox_send(ioc, cmd->msg, sizeof(cmd->msg));
+
+ /**
+ * Give a callback to the client, indicating that the command is sent
+ */
+ if (cmd->cbfn) {
+ cbfn = cmd->cbfn;
+ cbarg = cmd->cbarg;
+ cmd->cbfn = NULL;
+ cbfn(cbarg);
+ }
}
/**
@@ -1953,7 +1965,7 @@ bfa_ioc_isr(struct bfa_ioc *ioc, struct bfi_mbmsg *m)
case BFI_IOC_I2H_ENABLE_REPLY:
bfa_ioc_enable_reply(ioc,
(enum bfa_mode)msg->fw_event.port_mode,
- (enum bfa_mode)msg->fw_event.cap_bm);
+ msg->fw_event.cap_bm);
break;
case BFI_IOC_I2H_DISABLE_REPLY:
@@ -2003,6 +2015,9 @@ void
bfa_nw_ioc_detach(struct bfa_ioc *ioc)
{
bfa_fsm_send_event(ioc, IOC_E_DETACH);
+
+ /* Done with detach, empty the notify_q. */
+ INIT_LIST_HEAD(&ioc->notify_q);
}
/**
@@ -2292,15 +2307,12 @@ bfa_ioc_get_adapter_attr(struct bfa_ioc *ioc,
enum bfa_ioc_type
bfa_nw_ioc_get_type(struct bfa_ioc *ioc)
{
- enum bfi_port_mode mode;
-
if (ioc->clscode == BFI_PCIFN_CLASS_ETH)
return BFA_IOC_TYPE_LL;
BUG_ON(!(ioc->clscode == BFI_PCIFN_CLASS_FC));
- mode = (ioc->port_id == 0) ? ioc->port0_mode : ioc->port1_mode;
- return (mode == BFI_PORT_MODE_FC)
+ return (ioc->attr->port_mode == BFI_PORT_MODE_FC)
? BFA_IOC_TYPE_FC : BFA_IOC_TYPE_FCoE;
}
diff --git a/drivers/net/bna/bfi.h b/drivers/net/bna/bfi.h
index c534318..8dd8463 100644
--- a/drivers/net/bna/bfi.h
+++ b/drivers/net/bna/bfi.h
@@ -15,7 +15,6 @@
* All rights reserved
* www.brocade.com
*/
-
#ifndef __BFI_H__
#define __BFI_H__
@@ -38,18 +37,20 @@ struct bfi_mhdr {
union {
struct {
u8 qid;
- u8 lpu_id; /*!< msg destination */
+ u8 fn_lpu; /*!< msg destination */
} h2i;
u16 i2htok; /*!< token in msgs to host */
} mtag;
};
-#define bfi_mhdr_2_qid(_mh) ((_mh)->mtag.h2i.qid)
+#define bfi_fn_lpu(__fn, __lpu) ((__fn) << 1 | (__lpu))
+#define bfi_mhdr_2_fn(_mh) ((_mh)->mtag.h2i.fn_lpu >> 1)
+#define bfi_mhdr_2_qid(_mh) ((_mh)->mtag.h2i.qid)
-#define bfi_h2i_set(_mh, _mc, _op, _lpuid) do { \
+#define bfi_h2i_set(_mh, _mc, _op, _fn_lpu) do { \
(_mh).msg_class = (_mc); \
(_mh).msg_id = (_op); \
- (_mh).mtag.h2i.lpu_id = (_lpuid); \
+ (_mh).mtag.h2i.fn_lpu = (_fn_lpu); \
} while (0)
#define bfi_i2h_set(_mh, _mc, _op, _i2htok) do { \
@@ -240,7 +241,8 @@ struct bfi_ioc_attr {
u64 mfg_pwwn; /*!< Mfg port wwn */
u64 mfg_nwwn; /*!< Mfg node wwn */
mac_t mfg_mac; /*!< Mfg mac */
- u16 rsvd_a;
+ u8 port_mode; /* enum bfi_port_mode */
+ u8 rsvd_a;
u64 pwwn;
u64 nwwn;
mac_t mac; /*!< PBC or Mfg mac */
@@ -297,7 +299,6 @@ struct bfi_ioc_image_hdr {
u8 asic_mode;
u8 port0_mode; /*!< device mode for port 0 */
u8 port1_mode; /*!< device mode for port 1 */
- u8 rsvd_a;
u32 exec; /*!< exec vector */
u32 bootenv; /*!< firmware boot env */
u32 rsvd_b[4];
@@ -400,7 +401,7 @@ struct bfi_ioc_ctrl_req {
struct bfi_ioc_ctrl_reply {
struct bfi_mhdr mh; /*!< Common msg header */
u8 status; /*!< enable/disable status */
- u8 port_mode; /*!< bfa_mode */
+ u8 port_mode; /*!< enum bfa_mode */
u8 cap_bm; /*!< capability bit mask */
u8 rsvd;
};
--
1.7.1
next prev parent reply other threads:[~2011-07-18 8:25 UTC|newest]
Thread overview: 35+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-07-18 8:22 [PATCH 11/45] bna: Brocade-1860 Fabric Adapter Enablement Rasesh Mody
2011-07-18 8:22 ` [PATCH 12/45] bna: Hardware Clock Setup Rasesh Mody
2011-07-18 8:22 ` [PATCH 13/45] bna: IOC PLL changes and init cleanup Rasesh Mody
2011-07-18 8:22 ` [PATCH 14/45] bna: Brocade 1860 Register and ASIC Mode Changes Rasesh Mody
2011-07-18 8:22 ` [PATCH 15/45] bna: Set MBOX MSIX Index to Zero Rasesh Mody
2011-07-18 8:22 ` [PATCH 16/45] bna: IOC PCI Init & Enable Changes Rasesh Mody
2011-07-18 8:22 ` [PATCH 17/45] bna: Mailbox Interface Changes and FW MBOX fix Rasesh Mody
2011-07-18 8:22 ` [PATCH 18/45] bna: Implement Polling Mechanism for FW Ready Rasesh Mody
2011-07-18 8:22 ` [PATCH 19/45] bna: HW Type Check Fix Rasesh Mody
2011-07-18 8:22 ` [PATCH 20/45] bna: MBOX IRQ Sync Vector Num Fix Rasesh Mody
2011-07-18 8:22 ` [PATCH 21/45] bna: Remove Reset Call Back Rasesh Mody
2011-07-18 8:22 ` [PATCH 22/45] bna: Capability Map and MFG Block Changes for New HW Rasesh Mody
2011-07-18 8:22 ` [PATCH 23/45] bna: Added Defines for Multi TXQ Support Rasesh Mody
2011-07-18 8:22 ` [PATCH 24/45] bna: Mboxq Flush When Ioc Disabled Rasesh Mody
2011-07-18 8:22 ` [PATCH 25/45] bna: Move FW Init to HW Init and Disable Hang Unmapped Fix Rasesh Mody
2011-07-18 8:22 ` [PATCH 26/45] bna: Ethfn LPU DMA Read Fix Rasesh Mody
2011-07-18 8:22 ` [PATCH 27/45] bna: IOC Event Name Change Rasesh Mody
2011-07-18 8:22 ` [PATCH 28/45] bna: Add New IOC event Rasesh Mody
2011-07-18 8:22 ` [PATCH 29/45] bna: Add Sub-System Device ID Info Rasesh Mody
2011-07-18 8:22 ` [PATCH 30/45] bna: Add HW Semaphore Unlock Logic Rasesh Mody
2011-07-18 8:22 ` [PATCH 31/45] bna: Configuration changes Rasesh Mody
2011-07-18 8:22 ` [PATCH 32/45] bna: TxRx Coalesce Settings Fix and Reorg PCI Probe Failure Rasesh Mody
2011-07-18 8:22 ` [PATCH 33/45] bna: Device Init Fix Rasesh Mody
2011-07-18 8:22 ` [PATCH 34/45] bna: Add Multiple Tx Queue Support Rasesh Mody
2011-07-18 8:22 ` [PATCH 35/45] bna: Change TxQ Select Logic and Interrupt Handling Rasesh Mody
2011-07-18 8:22 ` [PATCH 36/45] bna: Data Path and API Changes Rasesh Mody
2011-07-18 8:22 ` [PATCH 37/45] bna: Adpater and Port Mode Settings Rasesh Mody
2011-07-18 8:22 ` [PATCH 38/45] bna: HW Error Counter Fix Rasesh Mody
2011-07-18 8:22 ` [PATCH 39/45] bna: RX Path Changes Rasesh Mody
2011-07-18 8:23 ` Rasesh Mody [this message]
2011-07-18 8:23 ` [PATCH 41/45] bna: Ethtool Ring Param Set changes and Add Stats Attr Rasesh Mody
2011-07-18 8:23 ` [PATCH 42/45] bna: PLL Init Fix and Add Stats Attributes Rasesh Mody
2011-07-18 8:23 ` [PATCH 43/45] bna: Dropped BUG_ONs and Rx id init fix Rasesh Mody
2011-07-18 8:23 ` [PATCH 44/45] bna: Header File and Unused Code Cleanup Rasesh Mody
2011-07-18 8:23 ` [PATCH 45/45] bna: Driver Version changed to 3.0.2.0 Rasesh Mody
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1310977385-5268-30-git-send-email-rmody@brocade.com \
--to=rmody@brocade.com \
--cc=adapter_linux_open_src_team@brocade.com \
--cc=davem@davemloft.net \
--cc=dradovan@brocade.com \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).