From: Rasesh Mody <rmody@brocade.com>
To: <davem@davemloft.net>, <netdev@vger.kernel.org>
Cc: <adapter_linux_open_src_team@brocade.com>, <dradovan@brocade.com>,
Rasesh Mody <rmody@brocade.com>
Subject: [PATCH 15/45] bna: Set MBOX MSIX Index to Zero
Date: Mon, 18 Jul 2011 01:22:35 -0700 [thread overview]
Message-ID: <1310977385-5268-5-git-send-email-rmody@brocade.com> (raw)
In-Reply-To: <1310977385-5268-1-git-send-email-rmody@brocade.com>
Change details:
- Modifying mbox irq alloc/free code to use MSIX index 0 for mailbox
- Call register_netdev() with the bnad_conf_lock() not held.
- setting interrupt type conditionally - MSI-X or INTx and not setting
interrupt type invariably to INTx.
Signed-off-by: Rasesh Mody <rmody@brocade.com>
---
drivers/net/bna/bnad.c | 17 +++++++++--------
drivers/net/bna/bnad.h | 3 +++
2 files changed, 12 insertions(+), 8 deletions(-)
diff --git a/drivers/net/bna/bnad.c b/drivers/net/bna/bnad.c
index f696d3a..cd2b921 100644
--- a/drivers/net/bna/bnad.c
+++ b/drivers/net/bna/bnad.c
@@ -58,7 +58,7 @@ static const u8 bnad_bcast_addr[] = {0xff, 0xff, 0xff, 0xff, 0xff, 0xff};
#define BNAD_GET_MBOX_IRQ(_bnad) \
(((_bnad)->cfg_flags & BNAD_CF_MSIX) ? \
- ((_bnad)->msix_table[(_bnad)->msix_num - 1].vector) : \
+ ((_bnad)->msix_table[BNAD_MAILBOX_MSIX_INDEX].vector) : \
((_bnad)->pcidev->irq))
#define BNAD_FILL_UNMAPQ_MEM_REQ(_res_info, _num, _depth) \
@@ -1216,17 +1216,17 @@ bnad_mbox_irq_alloc(struct bnad *bnad,
spin_lock_irqsave(&bnad->bna_lock, flags);
if (bnad->cfg_flags & BNAD_CF_MSIX) {
irq_handler = (irq_handler_t)bnad_msix_mbox_handler;
- irq = bnad->msix_table[bnad->msix_num - 1].vector;
+ irq = bnad->msix_table[BNAD_MAILBOX_MSIX_INDEX].vector;
irq_flags = 0;
intr_info->intr_type = BNA_INTR_T_MSIX;
- intr_info->idl[0].vector = bnad->msix_num - 1;
+ intr_info->idl[0].vector = BNAD_MAILBOX_MSIX_INDEX;
} else {
irq_handler = (irq_handler_t)bnad_isr;
irq = bnad->pcidev->irq;
irq_flags = IRQF_SHARED;
intr_info->intr_type = BNA_INTR_T_INTX;
- /* intr_info->idl.vector = 0 ? */
}
+
spin_unlock_irqrestore(&bnad->bna_lock, flags);
sprintf(bnad->mbox_irq_name, "%s", BNAD_NAME);
@@ -1279,11 +1279,12 @@ bnad_txrx_irq_alloc(struct bnad *bnad, enum bnad_intr_source src,
switch (src) {
case BNAD_INTR_TX:
- vector_start = txrx_id;
+ vector_start = BNAD_MAILBOX_MSIX_VECTORS + txrx_id;
break;
case BNAD_INTR_RX:
- vector_start = bnad->num_tx * bnad->num_txq_per_tx +
+ vector_start = BNAD_MAILBOX_MSIX_VECTORS +
+ (bnad->num_tx * bnad->num_txq_per_tx) +
txrx_id;
break;
@@ -1304,11 +1305,11 @@ bnad_txrx_irq_alloc(struct bnad *bnad, enum bnad_intr_source src,
switch (src) {
case BNAD_INTR_TX:
- intr_info->idl[0].vector = 0x1; /* Bit mask : Tx IB */
+ intr_info->idl[0].vector = BNAD_INTX_TX_IB_BITMASK;
break;
case BNAD_INTR_RX:
- intr_info->idl[0].vector = 0x2; /* Bit mask : Rx IB */
+ intr_info->idl[0].vector = BNAD_INTX_RX_IB_BITMASK;
break;
}
}
diff --git a/drivers/net/bna/bnad.h b/drivers/net/bna/bnad.h
index 0928e68..6a161b0 100644
--- a/drivers/net/bna/bnad.h
+++ b/drivers/net/bna/bnad.h
@@ -68,7 +68,10 @@ struct bnad_rx_ctrl {
#define BNAD_VERSION "2.3.2.3"
+#define BNAD_MAILBOX_MSIX_INDEX 0
#define BNAD_MAILBOX_MSIX_VECTORS 1
+#define BNAD_INTX_TX_IB_BITMASK 0x1
+#define BNAD_INTX_RX_IB_BITMASK 0x2
#define BNAD_STATS_TIMER_FREQ 1000 /* in msecs */
#define BNAD_DIM_TIMER_FREQ 1000 /* in msecs */
--
1.7.1
next prev parent reply other threads:[~2011-07-18 8:23 UTC|newest]
Thread overview: 35+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-07-18 8:22 [PATCH 11/45] bna: Brocade-1860 Fabric Adapter Enablement Rasesh Mody
2011-07-18 8:22 ` [PATCH 12/45] bna: Hardware Clock Setup Rasesh Mody
2011-07-18 8:22 ` [PATCH 13/45] bna: IOC PLL changes and init cleanup Rasesh Mody
2011-07-18 8:22 ` [PATCH 14/45] bna: Brocade 1860 Register and ASIC Mode Changes Rasesh Mody
2011-07-18 8:22 ` Rasesh Mody [this message]
2011-07-18 8:22 ` [PATCH 16/45] bna: IOC PCI Init & Enable Changes Rasesh Mody
2011-07-18 8:22 ` [PATCH 17/45] bna: Mailbox Interface Changes and FW MBOX fix Rasesh Mody
2011-07-18 8:22 ` [PATCH 18/45] bna: Implement Polling Mechanism for FW Ready Rasesh Mody
2011-07-18 8:22 ` [PATCH 19/45] bna: HW Type Check Fix Rasesh Mody
2011-07-18 8:22 ` [PATCH 20/45] bna: MBOX IRQ Sync Vector Num Fix Rasesh Mody
2011-07-18 8:22 ` [PATCH 21/45] bna: Remove Reset Call Back Rasesh Mody
2011-07-18 8:22 ` [PATCH 22/45] bna: Capability Map and MFG Block Changes for New HW Rasesh Mody
2011-07-18 8:22 ` [PATCH 23/45] bna: Added Defines for Multi TXQ Support Rasesh Mody
2011-07-18 8:22 ` [PATCH 24/45] bna: Mboxq Flush When Ioc Disabled Rasesh Mody
2011-07-18 8:22 ` [PATCH 25/45] bna: Move FW Init to HW Init and Disable Hang Unmapped Fix Rasesh Mody
2011-07-18 8:22 ` [PATCH 26/45] bna: Ethfn LPU DMA Read Fix Rasesh Mody
2011-07-18 8:22 ` [PATCH 27/45] bna: IOC Event Name Change Rasesh Mody
2011-07-18 8:22 ` [PATCH 28/45] bna: Add New IOC event Rasesh Mody
2011-07-18 8:22 ` [PATCH 29/45] bna: Add Sub-System Device ID Info Rasesh Mody
2011-07-18 8:22 ` [PATCH 30/45] bna: Add HW Semaphore Unlock Logic Rasesh Mody
2011-07-18 8:22 ` [PATCH 31/45] bna: Configuration changes Rasesh Mody
2011-07-18 8:22 ` [PATCH 32/45] bna: TxRx Coalesce Settings Fix and Reorg PCI Probe Failure Rasesh Mody
2011-07-18 8:22 ` [PATCH 33/45] bna: Device Init Fix Rasesh Mody
2011-07-18 8:22 ` [PATCH 34/45] bna: Add Multiple Tx Queue Support Rasesh Mody
2011-07-18 8:22 ` [PATCH 35/45] bna: Change TxQ Select Logic and Interrupt Handling Rasesh Mody
2011-07-18 8:22 ` [PATCH 36/45] bna: Data Path and API Changes Rasesh Mody
2011-07-18 8:22 ` [PATCH 37/45] bna: Adpater and Port Mode Settings Rasesh Mody
2011-07-18 8:22 ` [PATCH 38/45] bna: HW Error Counter Fix Rasesh Mody
2011-07-18 8:22 ` [PATCH 39/45] bna: RX Path Changes Rasesh Mody
2011-07-18 8:23 ` [PATCH 40/45] bna: Add IOC MBOX Call Back to Client Rasesh Mody
2011-07-18 8:23 ` [PATCH 41/45] bna: Ethtool Ring Param Set changes and Add Stats Attr Rasesh Mody
2011-07-18 8:23 ` [PATCH 42/45] bna: PLL Init Fix and Add Stats Attributes Rasesh Mody
2011-07-18 8:23 ` [PATCH 43/45] bna: Dropped BUG_ONs and Rx id init fix Rasesh Mody
2011-07-18 8:23 ` [PATCH 44/45] bna: Header File and Unused Code Cleanup Rasesh Mody
2011-07-18 8:23 ` [PATCH 45/45] bna: Driver Version changed to 3.0.2.0 Rasesh Mody
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1310977385-5268-5-git-send-email-rmody@brocade.com \
--to=rmody@brocade.com \
--cc=adapter_linux_open_src_team@brocade.com \
--cc=davem@davemloft.net \
--cc=dradovan@brocade.com \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).