From: Jiri Pirko <jpirko@redhat.com>
To: netdev@vger.kernel.org
Cc: davem@davemloft.net, shemminger@linux-foundation.org,
eric.dumazet@gmail.com, greearb@candelatech.com,
mirqus@gmail.com, sebastian.belden@googlemail.com
Subject: [patch net-next-2.6 17/47] gianfar: do vlan cleanup
Date: Wed, 20 Jul 2011 16:54:19 +0200 [thread overview]
Message-ID: <1311173689-17419-18-git-send-email-jpirko@redhat.com> (raw)
In-Reply-To: <1311173689-17419-1-git-send-email-jpirko@redhat.com>
- unify vlan and nonvlan rx path
- kill priv->vlgrp and gfar_vlan_rx_register
- allow to turn on/off rx/tx vlan accel via ethtool
Signed-off-by: Jiri Pirko <jpirko@redhat.com>
---
drivers/net/gianfar.c | 55 +++++++++++++++++++++-------------------
drivers/net/gianfar.h | 3 +-
drivers/net/gianfar_ethtool.c | 3 ++
3 files changed, 33 insertions(+), 28 deletions(-)
diff --git a/drivers/net/gianfar.c b/drivers/net/gianfar.c
index d265c6e..835cd25 100644
--- a/drivers/net/gianfar.c
+++ b/drivers/net/gianfar.c
@@ -140,8 +140,6 @@ int gfar_clean_rx_ring(struct gfar_priv_rx_q *rx_queue, int rx_work_limit);
static int gfar_clean_tx_ring(struct gfar_priv_tx_q *tx_queue);
static int gfar_process_frame(struct net_device *dev, struct sk_buff *skb,
int amount_pull);
-static void gfar_vlan_rx_register(struct net_device *netdev,
- struct vlan_group *grp);
void gfar_halt(struct net_device *dev);
static void gfar_halt_nodisable(struct net_device *dev);
void gfar_start(struct net_device *dev);
@@ -391,10 +389,11 @@ static void gfar_init_mac(struct net_device *ndev)
rctrl |= RCTRL_PRSDEP_INIT | RCTRL_TS_ENABLE;
/* keep vlan related bits if it's enabled */
- if (priv->vlgrp) {
+ if (ndev->features & NETIF_F_HW_VLAN_TX)
rctrl |= RCTRL_VLEX | RCTRL_PRSDEP_INIT;
+
+ if (ndev->features & NETIF_F_HW_VLAN_RX)
tctrl |= TCTRL_VLINS;
- }
/* Init rctrl based on our settings */
gfar_write(®s->rctrl, rctrl);
@@ -467,7 +466,6 @@ static const struct net_device_ops gfar_netdev_ops = {
.ndo_tx_timeout = gfar_timeout,
.ndo_do_ioctl = gfar_ioctl,
.ndo_get_stats = gfar_get_stats,
- .ndo_vlan_rx_register = gfar_vlan_rx_register,
.ndo_set_mac_address = eth_mac_addr,
.ndo_validate_addr = eth_validate_addr,
#ifdef CONFIG_NET_POLL_CONTROLLER
@@ -507,10 +505,17 @@ void unlock_tx_qs(struct gfar_private *priv)
spin_unlock(&priv->tx_queue[i]->txlock);
}
+static bool gfar_is_vlan_on(struct gfar_private *priv)
+{
+ return (priv->ndev->features & NETIF_F_HW_VLAN_RX) ||
+ (priv->ndev->features & NETIF_F_HW_VLAN_TX);
+}
+
/* Returns 1 if incoming frames use an FCB */
static inline int gfar_uses_fcb(struct gfar_private *priv)
{
- return priv->vlgrp || (priv->ndev->features & NETIF_F_RXCSUM) ||
+ return gfar_is_vlan_on(priv) ||
+ (priv->ndev->features & NETIF_F_RXCSUM) ||
(priv->device_flags & FSL_GIANFAR_DEV_HAS_TIMER);
}
@@ -1038,10 +1043,10 @@ static int gfar_probe(struct platform_device *ofdev)
NETIF_F_RXCSUM | NETIF_F_HIGHDMA;
}
- priv->vlgrp = NULL;
-
- if (priv->device_flags & FSL_GIANFAR_DEV_HAS_VLAN)
+ if (priv->device_flags & FSL_GIANFAR_DEV_HAS_VLAN) {
+ dev->hw_features |= NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_RX;
dev->features |= NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_RX;
+ }
if (priv->device_flags & FSL_GIANFAR_DEV_HAS_EXTENDED_HASH) {
priv->extended_hash = 1;
@@ -2304,10 +2309,8 @@ void gfar_check_rx_parser_mode(struct gfar_private *priv)
gfar_write(®s->rctrl, tempval);
}
-
/* Enables and disables VLAN insertion/extraction */
-static void gfar_vlan_rx_register(struct net_device *dev,
- struct vlan_group *grp)
+void gfar_vlan_mode(struct net_device *dev, u32 features)
{
struct gfar_private *priv = netdev_priv(dev);
struct gfar __iomem *regs = NULL;
@@ -2318,25 +2321,24 @@ static void gfar_vlan_rx_register(struct net_device *dev,
local_irq_save(flags);
lock_rx_qs(priv);
- priv->vlgrp = grp;
-
- if (grp) {
+ if (features & NETIF_F_HW_VLAN_TX) {
/* Enable VLAN tag insertion */
tempval = gfar_read(®s->tctrl);
tempval |= TCTRL_VLINS;
-
gfar_write(®s->tctrl, tempval);
-
- /* Enable VLAN tag extraction */
- tempval = gfar_read(®s->rctrl);
- tempval |= (RCTRL_VLEX | RCTRL_PRSDEP_INIT);
- gfar_write(®s->rctrl, tempval);
} else {
/* Disable VLAN tag insertion */
tempval = gfar_read(®s->tctrl);
tempval &= ~TCTRL_VLINS;
gfar_write(®s->tctrl, tempval);
+ }
+ if (features & NETIF_F_HW_VLAN_RX) {
+ /* Enable VLAN tag extraction */
+ tempval = gfar_read(®s->rctrl);
+ tempval |= (RCTRL_VLEX | RCTRL_PRSDEP_INIT);
+ gfar_write(®s->rctrl, tempval);
+ } else {
/* Disable VLAN tag extraction */
tempval = gfar_read(®s->rctrl);
tempval &= ~RCTRL_VLEX;
@@ -2359,7 +2361,7 @@ static int gfar_change_mtu(struct net_device *dev, int new_mtu)
int oldsize = priv->rx_buffer_size;
int frame_size = new_mtu + ETH_HLEN;
- if (priv->vlgrp)
+ if (gfar_is_vlan_on(priv))
frame_size += VLAN_HLEN;
if ((frame_size < 64) || (frame_size > JUMBO_FRAME_SIZE)) {
@@ -2712,11 +2714,12 @@ static int gfar_process_frame(struct net_device *dev, struct sk_buff *skb,
/* Tell the skb what kind of packet this is */
skb->protocol = eth_type_trans(skb, dev);
+ /* Set vlan tag */
+ if (fcb->flags & RXFCB_VLN)
+ __vlan_hwaccel_put_tag(skb, fcb->vlctl);
+
/* Send the packet up the stack */
- if (unlikely(priv->vlgrp && (fcb->flags & RXFCB_VLN)))
- ret = vlan_hwaccel_receive_skb(skb, priv->vlgrp, fcb->vlctl);
- else
- ret = netif_receive_skb(skb);
+ ret = netif_receive_skb(skb);
if (NET_RX_DROP == ret)
priv->extra_stats.kernel_dropped++;
diff --git a/drivers/net/gianfar.h b/drivers/net/gianfar.h
index 87c1d86..9aa4377 100644
--- a/drivers/net/gianfar.h
+++ b/drivers/net/gianfar.h
@@ -1077,8 +1077,6 @@ struct gfar_private {
struct sk_buff_head rx_recycle;
- struct vlan_group *vlgrp;
-
/* RX queue filer rule set*/
struct ethtool_rx_list rx_list;
struct mutex rx_queue_access;
@@ -1183,6 +1181,7 @@ extern void gfar_configure_coalescing(struct gfar_private *priv,
void gfar_init_sysfs(struct net_device *dev);
int gfar_set_features(struct net_device *dev, u32 features);
extern void gfar_check_rx_parser_mode(struct gfar_private *priv);
+extern void gfar_vlan_mode(struct net_device *dev, u32 features);
extern const struct ethtool_ops gfar_ethtool_ops;
diff --git a/drivers/net/gianfar_ethtool.c b/drivers/net/gianfar_ethtool.c
index 203369c..6e35069 100644
--- a/drivers/net/gianfar_ethtool.c
+++ b/drivers/net/gianfar_ethtool.c
@@ -526,6 +526,9 @@ int gfar_set_features(struct net_device *dev, u32 features)
int err = 0, i = 0;
u32 changed = dev->features ^ features;
+ if (changed & (NETIF_F_HW_VLAN_TX|NETIF_F_HW_VLAN_RX))
+ gfar_vlan_mode(dev, features);
+
if (!(changed & NETIF_F_RXCSUM))
return 0;
--
1.7.6
next prev parent reply other threads:[~2011-07-20 14:55 UTC|newest]
Thread overview: 71+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-07-20 14:54 [patch net-next-2.6 00/47] vlan cleanup Jiri Pirko
2011-07-20 14:54 ` [patch net-next-2.6 01/47] gianfar: rx parser Jiri Pirko
2011-07-20 15:01 ` Jiri Pirko
2011-07-20 14:54 ` [patch net-next-2.6 02/47] vlan: finish removing vlan_find_dev from public header Jiri Pirko
2011-07-20 14:54 ` [patch net-next-2.6 03/47] vlan: introduce __vlan_find_dev_deep() Jiri Pirko
2011-07-20 14:54 ` [patch net-next-2.6 04/47] nes: do vlan cleanup Jiri Pirko
2011-07-20 15:45 ` Michał Mirosław
2011-07-20 16:01 ` Michał Mirosław
2011-07-20 19:00 ` Jiri Pirko
2011-07-20 14:54 ` [patch net-next-2.6 05/47] ehea: " Jiri Pirko
2011-07-20 14:54 ` [patch net-next-2.6 06/47] lro: kill lro_vlan_hwaccel_receive_skb Jiri Pirko
2011-07-20 14:54 ` [patch net-next-2.6 07/47] lro: kill lro_vlan_hwaccel_receive_frags Jiri Pirko
2011-07-20 14:54 ` [patch net-next-2.6 08/47] lro: do vlan cleanup Jiri Pirko
2011-07-20 14:54 ` [patch net-next-2.6 09/47] amd8111e: " Jiri Pirko
2011-07-20 14:54 ` [patch net-next-2.6 10/47] atl1c: " Jiri Pirko
2011-07-20 14:54 ` [patch net-next-2.6 11/47] atl1e: " Jiri Pirko
2011-07-20 14:54 ` [patch net-next-2.6 12/47] bnad: " Jiri Pirko
2011-07-20 14:54 ` [patch net-next-2.6 13/47] chelsio: " Jiri Pirko
2011-07-20 14:54 ` [patch net-next-2.6 14/47] cxgb4vf: " Jiri Pirko
2011-07-20 14:54 ` [patch net-next-2.6 15/47] cxgb4: remove forgotten unused vlan_group Jiri Pirko
2011-07-20 14:54 ` [patch net-next-2.6 16/47] enic: do vlan cleanup Jiri Pirko
2011-07-20 21:59 ` vkolluri
2011-07-20 14:54 ` Jiri Pirko [this message]
2011-07-20 14:54 ` [patch net-next-2.6 18/47] igbvf: " Jiri Pirko
2011-07-20 17:26 ` Jesse Gross
2011-07-20 19:07 ` Jiri Pirko
2011-07-21 13:22 ` [patch net-next-2.6 18/47 V2] " Jiri Pirko
2011-07-21 15:57 ` Rose, Gregory V
2011-07-21 16:23 ` Jiri Pirko
2011-07-21 16:30 ` [patch net-next-2.6 18/47 V3] " Jiri Pirko
2011-07-20 14:54 ` [patch net-next-2.6 19/47] jme: " Jiri Pirko
2011-07-20 14:54 ` [patch net-next-2.6 20/47] mlx4: " Jiri Pirko
2011-07-20 14:54 ` [patch net-next-2.6 21/47] qlge: " Jiri Pirko
2011-07-21 13:24 ` [patch net-next-2.6 21/47 V2] " Jiri Pirko
2011-07-20 14:54 ` [patch net-next-2.6 22/47] s2io: " Jiri Pirko
2011-07-20 14:54 ` [patch net-next-2.6 23/47] spider_net: do not mention dying vlan_hwaccel_receive_skb Jiri Pirko
2011-07-20 14:54 ` [patch net-next-2.6 24/47] tehuti: do vlan cleanup Jiri Pirko
2011-07-20 14:54 ` [patch net-next-2.6 25/47] vlan: kill vlan_hwaccel_receive_skb Jiri Pirko
2011-07-20 14:54 ` [patch net-next-2.6 26/47] ixgbevf: do vlan cleanup Jiri Pirko
2011-07-21 13:25 ` [patch net-next-2.6 26/47 V2] " Jiri Pirko
2011-07-20 14:54 ` [patch net-next-2.6 27/47] acenic: " Jiri Pirko
2011-07-20 14:54 ` [patch net-next-2.6 28/47] via-velocity: " Jiri Pirko
2011-07-20 14:54 ` [patch net-next-2.6 29/47] starfire: " Jiri Pirko
2011-07-20 14:54 ` [patch net-next-2.6 30/47] ns83820: " Jiri Pirko
2011-07-20 14:54 ` [patch net-next-2.6 31/47] atl1: " Jiri Pirko
2011-07-20 14:54 ` [patch net-next-2.6 32/47] atl2: " Jiri Pirko
2011-07-20 14:54 ` [patch net-next-2.6 33/47] cxgb3: " Jiri Pirko
2011-07-20 14:54 ` [patch net-next-2.6 34/47] vlan: kill __vlan_hwaccel_rx and vlan_hwaccel_rx Jiri Pirko
2011-07-20 14:54 ` [patch net-next-2.6 35/47] e1000: do vlan cleanup Jiri Pirko
2011-07-20 17:48 ` Jesse Gross
2011-07-20 19:08 ` Jiri Pirko
2011-07-21 13:26 ` [patch net-next-2.6 35/47 V2] " Jiri Pirko
2011-07-20 14:54 ` [patch net-next-2.6 36/47] forcedeth: " Jiri Pirko
2011-07-20 14:54 ` [patch net-next-2.6 37/47] igb: " Jiri Pirko
2011-07-20 17:35 ` Jesse Gross
2011-07-20 19:10 ` Jiri Pirko
2011-07-20 23:58 ` Jesse Gross
2011-07-21 6:57 ` Jiri Pirko
2011-07-21 21:45 ` Jesse Gross
2011-07-21 13:27 ` [patch net-next-2.6 37/47 V2] " Jiri Pirko
2011-07-20 14:54 ` [patch net-next-2.6 38/47] vxge: " Jiri Pirko
2011-07-20 14:54 ` [patch net-next-2.6 39/47] qeth: " Jiri Pirko
2011-07-20 14:54 ` [patch net-next-2.6 40/47] vlan: kill vlan_gro_frags and vlan_gro_receive Jiri Pirko
2011-07-20 14:54 ` [patch net-next-2.6 41/47] stmmac: do vlan cleanup Jiri Pirko
2011-07-20 14:54 ` [patch net-next-2.6 42/47] qlcnic: remove usage of vlan_group_get_device Jiri Pirko
2011-07-20 14:54 ` [patch net-next-2.6 43/47] staging: et131x: remove unused prototype et131x_vlan_rx_register Jiri Pirko
2011-07-20 14:54 ` [patch net-next-2.6 44/47] bonding: do vlan cleanup Jiri Pirko
2011-07-20 14:54 ` [patch net-next-2.6 45/47] macvlan: " Jiri Pirko
2011-07-20 14:54 ` [patch net-next-2.6 46/47] vlan: kill ndo_vlan_rx_register Jiri Pirko
2011-07-20 14:54 ` [patch net-next-2.6 47/47] vlan: move vlan_group_[gs]et_device to public header Jiri Pirko
2011-07-21 20:57 ` [patch net-next-2.6 00/47] vlan cleanup David Miller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1311173689-17419-18-git-send-email-jpirko@redhat.com \
--to=jpirko@redhat.com \
--cc=davem@davemloft.net \
--cc=eric.dumazet@gmail.com \
--cc=greearb@candelatech.com \
--cc=mirqus@gmail.com \
--cc=netdev@vger.kernel.org \
--cc=sebastian.belden@googlemail.com \
--cc=shemminger@linux-foundation.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).