From: "Matt Carlson" <mcarlson@broadcom.com>
To: davem@davemloft.net
Cc: netdev@vger.kernel.org, mcarlson@broadcom.com
Subject: [PATCH net-next 1/8] tg3: Fix io failures after chip reset
Date: Wed, 20 Jul 2011 13:20:50 -0700 [thread overview]
Message-ID: <1311193257-20531-2-git-send-email-mcarlson@broadcom.com> (raw)
Commit f2096f94b514d88593355995d5dd276961e88af1, entitled
"tg3: Add 5720 H2BMC support", needed to add code to preserve some bits
set by firmware. Unfortunately the new code causes throughput to stop
after a chip reset because it enables state machines before they are
ready. This patch undoes the problematic code. The bits will be
restored later in the init sequence.
Signed-off-by: Matt Carlson <mcarlson@broadcom.com>
Reviewed-by: Michael Chan <mchan@broadcom.com>
---
drivers/net/tg3.c | 18 ++++++------------
1 files changed, 6 insertions(+), 12 deletions(-)
diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c
index a5ff82d..5bf7671 100644
--- a/drivers/net/tg3.c
+++ b/drivers/net/tg3.c
@@ -7412,16 +7412,11 @@ static int tg3_chip_reset(struct tg3 *tp)
tw32(TG3PCI_CLOCK_CTRL, tp->pci_clock_ctrl);
}
- if (tg3_flag(tp, ENABLE_APE))
- tp->mac_mode = MAC_MODE_APE_TX_EN |
- MAC_MODE_APE_RX_EN |
- MAC_MODE_TDE_ENABLE;
-
if (tp->phy_flags & TG3_PHYFLG_PHY_SERDES) {
- tp->mac_mode |= MAC_MODE_PORT_MODE_TBI;
+ tp->mac_mode = MAC_MODE_PORT_MODE_TBI;
val = tp->mac_mode;
} else if (tp->phy_flags & TG3_PHYFLG_MII_SERDES) {
- tp->mac_mode |= MAC_MODE_PORT_MODE_GMII;
+ tp->mac_mode = MAC_MODE_PORT_MODE_GMII;
val = tp->mac_mode;
} else
val = 0;
@@ -8559,12 +8554,11 @@ static int tg3_reset_hw(struct tg3 *tp, int reset_phy)
udelay(10);
}
- if (tg3_flag(tp, ENABLE_APE))
- tp->mac_mode = MAC_MODE_APE_TX_EN | MAC_MODE_APE_RX_EN;
- else
- tp->mac_mode = 0;
tp->mac_mode |= MAC_MODE_TXSTAT_ENABLE | MAC_MODE_RXSTAT_ENABLE |
- MAC_MODE_TDE_ENABLE | MAC_MODE_RDE_ENABLE | MAC_MODE_FHDE_ENABLE;
+ MAC_MODE_TDE_ENABLE | MAC_MODE_RDE_ENABLE |
+ MAC_MODE_FHDE_ENABLE;
+ if (tg3_flag(tp, ENABLE_APE))
+ tp->mac_mode |= MAC_MODE_APE_TX_EN | MAC_MODE_APE_RX_EN;
if (!tg3_flag(tp, 5705_PLUS) &&
!(tp->phy_flags & TG3_PHYFLG_PHY_SERDES) &&
GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5700)
--
1.7.3.4
reply other threads:[~2011-07-20 20:19 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1311193257-20531-2-git-send-email-mcarlson@broadcom.com \
--to=mcarlson@broadcom.com \
--cc=davem@davemloft.net \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox