netdev.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Gerrit Renker <gerrit@erg.abdn.ac.uk>
To: davem@davemloft.net
Cc: dccp@vger.kernel.org, netdev@vger.kernel.org
Subject: [PATCH 2/7] dccp: support for exchanging of NN options in established state 2/2
Date: Mon, 25 Jul 2011 07:36:31 -0600	[thread overview]
Message-ID: <1311600996-6712-3-git-send-email-gerrit@erg.abdn.ac.uk> (raw)
In-Reply-To: <test_tree_patch_set_update_2011-07-25>

This patch adds the receiver side and the (fast-path) activation part for
dynamic changes of non-negotiable (NN) parameters in (PART)OPEN state.

Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Signed-off-by: Samuel Jero <sj323707@ohio.edu>
Acked-by: Ian McDonald <ian.mcdonald@jandi.co.uk>
---
 net/dccp/feat.c |  116 +++++++++++++++++++++++++++++++++++++++++++++++++++++++
 1 files changed, 116 insertions(+), 0 deletions(-)

--- a/net/dccp/feat.c
+++ b/net/dccp/feat.c
@@ -344,6 +344,20 @@ static int __dccp_feat_activate(struct sock *sk, const int idx,
 	return dccp_feat_table[idx].activation_hdlr(sk, val, rx);
 }
 
+/**
+ * dccp_feat_activate  -  Activate feature value on socket
+ * @sk: fully connected DCCP socket (after handshake is complete)
+ * @feat_num: feature to activate, one of %dccp_feature_numbers
+ * @local: whether local (1) or remote (0) @feat_num is meant
+ * @fval: the value (SP or NN) to activate, or NULL to use the default value
+ * For general use this function is preferable over __dccp_feat_activate().
+ */
+static int dccp_feat_activate(struct sock *sk, u8 feat_num, bool local,
+			      dccp_feat_val const *fval)
+{
+	return __dccp_feat_activate(sk, dccp_feat_index(feat_num), local, fval);
+}
+
 /* Test for "Req'd" feature (RFC 4340, 6.4) */
 static inline int dccp_feat_must_be_understood(u8 feat_num)
 {
@@ -1252,6 +1266,100 @@ confirmation_failed:
 }
 
 /**
+ * dccp_feat_handle_nn_established  -  Fast-path reception of NN options
+ * @sk:		socket of an established DCCP connection
+ * @mandatory:	whether @opt was preceded by a Mandatory option
+ * @opt:	%DCCPO_CHANGE_L | %DCCPO_CONFIRM_R (NN only)
+ * @feat:	NN number, one of %dccp_feature_numbers
+ * @val:	NN value
+ * @len:	length of @val in bytes
+ * This function combines the functionality of change_recv/confirm_recv, with
+ * the following differences (reset codes are the same):
+ *    - cleanup after receiving the Confirm;
+ *    - values are directly activated after successful parsing;
+ *    - deliberately restricted to NN features.
+ * The restriction to NN features is essential since SP features can have non-
+ * predictable outcomes (depending on the remote configuration), and are inter-
+ * dependent (CCIDs for instance cause further dependencies).
+ */
+static u8 dccp_feat_handle_nn_established(struct sock *sk, u8 mandatory, u8 opt,
+					  u8 feat, u8 *val, u8 len)
+{
+	struct list_head *fn = &dccp_sk(sk)->dccps_featneg;
+	const bool local = (opt == DCCPO_CONFIRM_R);
+	struct dccp_feat_entry *entry;
+	u8 type = dccp_feat_type(feat);
+	dccp_feat_val fval;
+
+	dccp_feat_print_opt(opt, feat, val, len, mandatory);
+
+	/* Ignore non-mandatory unknown and non-NN features */
+	if (type == FEAT_UNKNOWN) {
+		if (local && !mandatory)
+			return 0;
+		goto fast_path_unknown;
+	} else if (type != FEAT_NN) {
+		return 0;
+	}
+
+	/*
+	 * We don't accept empty Confirms, since in fast-path feature
+	 * negotiation the values are enabled immediately after sending
+	 * the Change option.
+	 * Empty Changes on the other hand are invalid (RFC 4340, 6.1).
+	 */
+	if (len == 0 || len > sizeof(fval.nn))
+		goto fast_path_unknown;
+
+	if (opt == DCCPO_CHANGE_L) {
+		fval.nn = dccp_decode_value_var(val, len);
+		if (!dccp_feat_is_valid_nn_val(feat, fval.nn))
+			goto fast_path_unknown;
+
+		if (dccp_feat_push_confirm(fn, feat, local, &fval) ||
+		    dccp_feat_activate(sk, feat, local, &fval))
+			return DCCP_RESET_CODE_TOO_BUSY;
+
+		/* set the `Ack Pending' flag to piggyback a Confirm */
+		inet_csk_schedule_ack(sk);
+
+	} else if (opt == DCCPO_CONFIRM_R) {
+		entry = dccp_feat_list_lookup(fn, feat, local);
+		if (entry == NULL || entry->state != FEAT_CHANGING)
+			return 0;
+
+		fval.nn = dccp_decode_value_var(val, len);
+		/*
+		 * Just ignore a value that doesn't match our current value.
+		 * If the option changes twice within two RTTs, then at least
+		 * one CONFIRM will be received for the old value after a
+		 * new CHANGE was sent.
+		 */
+		if (fval.nn != entry->val.nn)
+			return 0;
+
+		/* Only activate after receiving the Confirm option (6.6.1). */
+		dccp_feat_activate(sk, feat, local, &fval);
+
+		/* It has been confirmed - so remove the entry */
+		dccp_feat_list_pop(entry);
+
+	} else {
+		DCCP_WARN("Received illegal option %u\n", opt);
+		goto fast_path_failed;
+	}
+	return 0;
+
+fast_path_unknown:
+	if (!mandatory)
+		return dccp_push_empty_confirm(fn, feat, local);
+
+fast_path_failed:
+	return mandatory ? DCCP_RESET_CODE_MANDATORY_ERROR
+			 : DCCP_RESET_CODE_OPTION_ERROR;
+}
+
+/**
  * dccp_feat_parse_options  -  Process Feature-Negotiation Options
  * @sk: for general use and used by the client during connection setup
  * @dreq: used by the server during connection setup
@@ -1286,6 +1394,14 @@ int dccp_feat_parse_options(struct sock *sk, struct dccp_request_sock *dreq,
 			return dccp_feat_confirm_recv(fn, mandatory, opt, feat,
 						      val, len, server);
 		}
+		break;
+	/*
+	 *	Support for exchanging NN options on an established connection.
+	 */
+	case DCCP_OPEN:
+	case DCCP_PARTOPEN:
+		return dccp_feat_handle_nn_established(sk, mandatory, opt, feat,
+						       val, len);
 	}
 	return 0;	/* ignore FN options in all other states */
 }

  parent reply	other threads:[~2011-07-25 13:37 UTC|newest]

Thread overview: 11+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <test_tree_patch_set_update_2011-07-25>
2011-07-25 13:36 ` net-next-2.6 [PATCH 0/7] dccp: add support for dynamic parameter updates Gerrit Renker
2011-08-01  7:10   ` David Miller
2011-08-01 14:43     ` Gerrit Renker
2011-08-02  0:37       ` David Miller
2011-07-25 13:36 ` [PATCH 1/7] dccp: support for the exchange of NN options in established state 1/2 Gerrit Renker
2011-07-25 13:36 ` Gerrit Renker [this message]
2011-07-25 13:36 ` [PATCH 3/7] dccp: send Confirm options only once Gerrit Renker
2011-07-25 13:36 ` [PATCH 4/7] dccp ccid-2: use feature-negotiation to report Ack Ratio changes Gerrit Renker
2011-07-25 13:36 ` [PATCH 5/7] dccp ccid-2: prevent cwnd > Sequence Window Gerrit Renker
2011-07-25 13:36 ` [PATCH 6/7] dccp ccid-2: increment cwnd correctly Gerrit Renker
2011-07-25 13:36 ` [PATCH 7/7] dccp ccid-2: check Ack Ratio when reducing cwnd Gerrit Renker

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1311600996-6712-3-git-send-email-gerrit@erg.abdn.ac.uk \
    --to=gerrit@erg.abdn.ac.uk \
    --cc=davem@davemloft.net \
    --cc=dccp@vger.kernel.org \
    --cc=netdev@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).