From: Jon Mason <jdmason@kudzu.us>
To: "David S. Miller" <davem@davemloft.net>
Cc: netdev@vger.kernel.org, Samuel Ortiz <samuel@sortiz.org>
Subject: [resend PATCH] irda: use PCI_VENDOR_ID_*
Date: Wed, 3 Aug 2011 11:42:42 -0500 [thread overview]
Message-ID: <1312389762-9728-1-git-send-email-jdmason@kudzu.us> (raw)
Use PCI_VENDOR_ID_* from pci_ids.h instead of creating #define locally.
Signed-off-by: Jon Mason <jdmason@kudzu.us>
---
drivers/net/irda/smsc-ircc2.c | 18 ++++++++----------
1 files changed, 8 insertions(+), 10 deletions(-)
diff --git a/drivers/net/irda/smsc-ircc2.c b/drivers/net/irda/smsc-ircc2.c
index 954f6e93..8b1c348 100644
--- a/drivers/net/irda/smsc-ircc2.c
+++ b/drivers/net/irda/smsc-ircc2.c
@@ -2405,8 +2405,6 @@ static int __init smsc_superio_lpc(unsigned short cfg_base)
* addresses making a subsystem device table necessary.
*/
#ifdef CONFIG_PCI
-#define PCIID_VENDOR_INTEL 0x8086
-#define PCIID_VENDOR_ALI 0x10b9
static struct smsc_ircc_subsystem_configuration subsystem_configurations[] __initdata = {
/*
* Subsystems needing entries:
@@ -2416,7 +2414,7 @@ static struct smsc_ircc_subsystem_configuration subsystem_configurations[] __ini
*/
{
/* Guessed entry */
- .vendor = PCIID_VENDOR_INTEL, /* Intel 82801DBM LPC bridge */
+ .vendor = PCI_VENDOR_ID_INTEL, /* Intel 82801DBM LPC bridge */
.device = 0x24cc,
.subvendor = 0x103c,
.subdevice = 0x08bc,
@@ -2429,7 +2427,7 @@ static struct smsc_ircc_subsystem_configuration subsystem_configurations[] __ini
.name = "HP nx5000 family",
},
{
- .vendor = PCIID_VENDOR_INTEL, /* Intel 82801DBM LPC bridge */
+ .vendor = PCI_VENDOR_ID_INTEL, /* Intel 82801DBM LPC bridge */
.device = 0x24cc,
.subvendor = 0x103c,
.subdevice = 0x088c,
@@ -2443,7 +2441,7 @@ static struct smsc_ircc_subsystem_configuration subsystem_configurations[] __ini
.name = "HP nc8000 family",
},
{
- .vendor = PCIID_VENDOR_INTEL, /* Intel 82801DBM LPC bridge */
+ .vendor = PCI_VENDOR_ID_INTEL, /* Intel 82801DBM LPC bridge */
.device = 0x24cc,
.subvendor = 0x103c,
.subdevice = 0x0890,
@@ -2456,7 +2454,7 @@ static struct smsc_ircc_subsystem_configuration subsystem_configurations[] __ini
.name = "HP nc6000 family",
},
{
- .vendor = PCIID_VENDOR_INTEL, /* Intel 82801DBM LPC bridge */
+ .vendor = PCI_VENDOR_ID_INTEL, /* Intel 82801DBM LPC bridge */
.device = 0x24cc,
.subvendor = 0x0e11,
.subdevice = 0x0860,
@@ -2471,7 +2469,7 @@ static struct smsc_ircc_subsystem_configuration subsystem_configurations[] __ini
},
{
/* Intel 82801DB/DBL (ICH4/ICH4-L) LPC Interface Bridge */
- .vendor = PCIID_VENDOR_INTEL,
+ .vendor = PCI_VENDOR_ID_INTEL,
.device = 0x24c0,
.subvendor = 0x1179,
.subdevice = 0xffff, /* 0xffff is "any" */
@@ -2484,7 +2482,7 @@ static struct smsc_ircc_subsystem_configuration subsystem_configurations[] __ini
.name = "Toshiba laptop with Intel 82801DB/DBL LPC bridge",
},
{
- .vendor = PCIID_VENDOR_INTEL, /* Intel 82801CAM ISA bridge */
+ .vendor = PCI_VENDOR_ID_INTEL, /* Intel 82801CAM ISA bridge */
.device = 0x248c,
.subvendor = 0x1179,
.subdevice = 0xffff, /* 0xffff is "any" */
@@ -2498,7 +2496,7 @@ static struct smsc_ircc_subsystem_configuration subsystem_configurations[] __ini
},
{
/* 82801DBM (ICH4-M) LPC Interface Bridge */
- .vendor = PCIID_VENDOR_INTEL,
+ .vendor = PCI_VENDOR_ID_INTEL,
.device = 0x24cc,
.subvendor = 0x1179,
.subdevice = 0xffff, /* 0xffff is "any" */
@@ -2512,7 +2510,7 @@ static struct smsc_ircc_subsystem_configuration subsystem_configurations[] __ini
},
{
/* ALi M1533/M1535 PCI to ISA Bridge [Aladdin IV/V/V+] */
- .vendor = PCIID_VENDOR_ALI,
+ .vendor = PCI_VENDOR_ID_AL,
.device = 0x1533,
.subvendor = 0x1179,
.subdevice = 0xffff, /* 0xffff is "any" */
--
1.7.6
next reply other threads:[~2011-08-03 16:42 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-08-03 16:42 Jon Mason [this message]
2011-08-04 2:04 ` [resend PATCH] irda: use PCI_VENDOR_ID_* David Miller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1312389762-9728-1-git-send-email-jdmason@kudzu.us \
--to=jdmason@kudzu.us \
--cc=davem@davemloft.net \
--cc=netdev@vger.kernel.org \
--cc=samuel@sortiz.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox