From: Jesse Gross <jesse@nicira.com>
To: David Miller <davem@davemloft.net>
Cc: netdev@vger.kernel.org, "Scott J. Goldman" <scottjg@vmware.com>,
Shreyas Bhatewara <sbhatewara@vmware.com>,
VMware PV-Drivers <pv-drivers@vmware.com>
Subject: [PATCH net] vmxnet3: Don't enable vlan filters in promiscuous mode.
Date: Mon, 8 Aug 2011 02:15:47 -0700 [thread overview]
Message-ID: <1312794947-3163-1-git-send-email-jesse@nicira.com> (raw)
The vmxnet3 driver enables vlan filters if filtering is enabled for
any vlan. In promiscuous mode the filter table is cleared to in
order to disable filtering. However, if a vlan device is subsequently
created that vlan will be added to the filter, re-engaging it. As a
result, not only do we not see all the vlans in promiscuous mode, we
don't even see vlans for which a filter was previously created.
CC: Scott J. Goldman <scottjg@vmware.com>
CC: Shreyas Bhatewara <sbhatewara@vmware.com>
CC: VMware PV-Drivers <pv-drivers@vmware.com>
Signed-off-by: Jesse Gross <jesse@nicira.com>
---
drivers/net/vmxnet3/vmxnet3_drv.c | 34 ++++++++++++++++++++--------------
1 files changed, 20 insertions(+), 14 deletions(-)
diff --git a/drivers/net/vmxnet3/vmxnet3_drv.c b/drivers/net/vmxnet3/vmxnet3_drv.c
index 1cbacb3..0959583 100644
--- a/drivers/net/vmxnet3/vmxnet3_drv.c
+++ b/drivers/net/vmxnet3/vmxnet3_drv.c
@@ -1929,14 +1929,17 @@ static void
vmxnet3_vlan_rx_add_vid(struct net_device *netdev, u16 vid)
{
struct vmxnet3_adapter *adapter = netdev_priv(netdev);
- u32 *vfTable = adapter->shared->devRead.rxFilterConf.vfTable;
- unsigned long flags;
- VMXNET3_SET_VFTABLE_ENTRY(vfTable, vid);
- spin_lock_irqsave(&adapter->cmd_lock, flags);
- VMXNET3_WRITE_BAR1_REG(adapter, VMXNET3_REG_CMD,
- VMXNET3_CMD_UPDATE_VLAN_FILTERS);
- spin_unlock_irqrestore(&adapter->cmd_lock, flags);
+ if (!(netdev->flags & IFF_PROMISC)) {
+ u32 *vfTable = adapter->shared->devRead.rxFilterConf.vfTable;
+ unsigned long flags;
+
+ VMXNET3_SET_VFTABLE_ENTRY(vfTable, vid);
+ spin_lock_irqsave(&adapter->cmd_lock, flags);
+ VMXNET3_WRITE_BAR1_REG(adapter, VMXNET3_REG_CMD,
+ VMXNET3_CMD_UPDATE_VLAN_FILTERS);
+ spin_unlock_irqrestore(&adapter->cmd_lock, flags);
+ }
set_bit(vid, adapter->active_vlans);
}
@@ -1946,14 +1949,17 @@ static void
vmxnet3_vlan_rx_kill_vid(struct net_device *netdev, u16 vid)
{
struct vmxnet3_adapter *adapter = netdev_priv(netdev);
- u32 *vfTable = adapter->shared->devRead.rxFilterConf.vfTable;
- unsigned long flags;
- VMXNET3_CLEAR_VFTABLE_ENTRY(vfTable, vid);
- spin_lock_irqsave(&adapter->cmd_lock, flags);
- VMXNET3_WRITE_BAR1_REG(adapter, VMXNET3_REG_CMD,
- VMXNET3_CMD_UPDATE_VLAN_FILTERS);
- spin_unlock_irqrestore(&adapter->cmd_lock, flags);
+ if (!(netdev->flags & IFF_PROMISC)) {
+ u32 *vfTable = adapter->shared->devRead.rxFilterConf.vfTable;
+ unsigned long flags;
+
+ VMXNET3_CLEAR_VFTABLE_ENTRY(vfTable, vid);
+ spin_lock_irqsave(&adapter->cmd_lock, flags);
+ VMXNET3_WRITE_BAR1_REG(adapter, VMXNET3_REG_CMD,
+ VMXNET3_CMD_UPDATE_VLAN_FILTERS);
+ spin_unlock_irqrestore(&adapter->cmd_lock, flags);
+ }
clear_bit(vid, adapter->active_vlans);
}
--
1.7.4.1
next reply other threads:[~2011-08-08 9:15 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-08-08 9:15 Jesse Gross [this message]
2011-08-09 21:32 ` [PATCH net] vmxnet3: Don't enable vlan filters in promiscuous mode Shreyas Bhatewara
2011-08-10 0:16 ` Jesse Gross
2011-08-10 3:00 ` Shreyas Bhatewara
2011-08-14 1:00 ` David Miller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1312794947-3163-1-git-send-email-jesse@nicira.com \
--to=jesse@nicira.com \
--cc=davem@davemloft.net \
--cc=netdev@vger.kernel.org \
--cc=pv-drivers@vmware.com \
--cc=sbhatewara@vmware.com \
--cc=scottjg@vmware.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox