From: Mark Einon <mark.einon@gmail.com>
To: netdev@vger.kernel.org
Cc: davem@davemloft.net, Mark Einon <mark.einon@gmail.com>
Subject: [PATCH] mii: Remove references to DP83840 PHY in mii.h
Date: Wed, 31 Aug 2011 16:35:28 +0100 [thread overview]
Message-ID: <1314804928-7353-1-git-send-email-mark.einon@gmail.com> (raw)
There are references to this PHY chip in the generic mii.h header, so removing them.
Signed-off-by: Mark Einon <mark.einon@gmail.com>
---
include/linux/mii.h | 12 ++++++------
1 files changed, 6 insertions(+), 6 deletions(-)
diff --git a/include/linux/mii.h b/include/linux/mii.h
index 103113a..4c3cfb5 100644
--- a/include/linux/mii.h
+++ b/include/linux/mii.h
@@ -40,12 +40,12 @@
#define BMCR_CTST 0x0080 /* Collision test */
#define BMCR_FULLDPLX 0x0100 /* Full duplex */
#define BMCR_ANRESTART 0x0200 /* Auto negotiation restart */
-#define BMCR_ISOLATE 0x0400 /* Disconnect DP83840 from MII */
-#define BMCR_PDOWN 0x0800 /* Powerdown the DP83840 */
+#define BMCR_ISOLATE 0x0400 /* Disconnect PHY from MII */
+#define BMCR_PDOWN 0x0800 /* Powerdown */
#define BMCR_ANENABLE 0x1000 /* Enable auto negotiation */
#define BMCR_SPEED100 0x2000 /* Select 100Mbps */
#define BMCR_LOOPBACK 0x4000 /* TXD loopback bits */
-#define BMCR_RESET 0x8000 /* Reset the DP83840 */
+#define BMCR_RESET 0x8000 /* Reset */
/* Basic mode status register. */
#define BMSR_ERCAP 0x0001 /* Ext-reg capability */
@@ -55,9 +55,9 @@
#define BMSR_RFAULT 0x0010 /* Remote fault detected */
#define BMSR_ANEGCOMPLETE 0x0020 /* Auto-negotiation complete */
#define BMSR_RESV 0x00c0 /* Unused... */
-#define BMSR_ESTATEN 0x0100 /* Extended Status in R15 */
-#define BMSR_100HALF2 0x0200 /* Can do 100BASE-T2 HDX */
-#define BMSR_100FULL2 0x0400 /* Can do 100BASE-T2 FDX */
+#define BMSR_ESTATEN 0x0100 /* Extended Status in R15 */
+#define BMSR_100HALF2 0x0200 /* Can do 100BASE-T2 HDX */
+#define BMSR_100FULL2 0x0400 /* Can do 100BASE-T2 FDX */
#define BMSR_10HALF 0x0800 /* Can do 10mbps, half-duplex */
#define BMSR_10FULL 0x1000 /* Can do 10mbps, full-duplex */
#define BMSR_100HALF 0x2000 /* Can do 100mbps, half-duplex */
--
1.7.6
next reply other threads:[~2011-08-31 15:36 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-08-31 15:35 Mark Einon [this message]
2011-08-31 17:34 ` [PATCH] mii: Remove references to DP83840 PHY in mii.h Ben Hutchings
2011-09-01 9:22 ` Mark Einon
2011-09-01 9:22 ` [PATCH 1/2] [TRIVIAL] mii: Convert spaces to tabs " Mark Einon
2011-09-01 9:22 ` [PATCH 2/2] mii: Remove references to DP83840 PHY " Mark Einon
2011-09-01 18:15 ` Ben Hutchings (bhutchings)
2011-09-15 19:45 ` [PATCH 1/2] [TRIVIAL] mii: Convert spaces to tabs " David Miller
2011-09-15 19:44 ` [PATCH] mii: Remove references to DP83840 PHY " David Miller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1314804928-7353-1-git-send-email-mark.einon@gmail.com \
--to=mark.einon@gmail.com \
--cc=davem@davemloft.net \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).