From: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
To: davem@davemloft.net
Cc: Emil Tantilov <emil.s.tantilov@intel.com>,
netdev@vger.kernel.org, gospo@redhat.com,
Jonathan Lynch <jonathan.lynch@thenowfactory.com>,
Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Subject: [net-next 09/11] ixgbe: cleanup some register reads
Date: Fri, 16 Sep 2011 19:15:50 -0700 [thread overview]
Message-ID: <1316225752-1709-10-git-send-email-jeffrey.t.kirsher@intel.com> (raw)
In-Reply-To: <1316225752-1709-1-git-send-email-jeffrey.t.kirsher@intel.com>
From: Emil Tantilov <emil.s.tantilov@intel.com>
Remove duplicate inc of hwstats->ruc
Introduce separate loops for 8 and 16 register reads.
Consolidate mac checks under one case.
Make sure registers are cleared on read.
Reported-by: Jonathan Lynch <jonathan.lynch@thenowfactory.com>
Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com>
CC: Jonathan Lynch <jonathan.lynch@thenowfactory.com>
Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
drivers/net/ethernet/intel/ixgbe/ixgbe_main.c | 30 +++++++++++++++++-------
1 files changed, 21 insertions(+), 9 deletions(-)
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
index a4103ef..1e72c00 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
@@ -5463,20 +5463,21 @@ void ixgbe_update_stats(struct ixgbe_adapter *adapter)
netdev->stats.tx_packets = packets;
hwstats->crcerrs += IXGBE_READ_REG(hw, IXGBE_CRCERRS);
+
+ /* 8 register reads */
for (i = 0; i < 8; i++) {
/* for packet buffers not used, the register should read 0 */
mpc = IXGBE_READ_REG(hw, IXGBE_MPC(i));
missed_rx += mpc;
hwstats->mpc[i] += mpc;
total_mpc += hwstats->mpc[i];
- if (hw->mac.type == ixgbe_mac_82598EB)
- hwstats->rnbc[i] += IXGBE_READ_REG(hw, IXGBE_RNBC(i));
- hwstats->qptc[i] += IXGBE_READ_REG(hw, IXGBE_QPTC(i));
- hwstats->qbtc[i] += IXGBE_READ_REG(hw, IXGBE_QBTC(i));
- hwstats->qprc[i] += IXGBE_READ_REG(hw, IXGBE_QPRC(i));
- hwstats->qbrc[i] += IXGBE_READ_REG(hw, IXGBE_QBRC(i));
+ hwstats->pxontxc[i] += IXGBE_READ_REG(hw, IXGBE_PXONTXC(i));
+ hwstats->pxofftxc[i] += IXGBE_READ_REG(hw, IXGBE_PXOFFTXC(i));
switch (hw->mac.type) {
case ixgbe_mac_82598EB:
+ hwstats->rnbc[i] += IXGBE_READ_REG(hw, IXGBE_RNBC(i));
+ hwstats->qbtc[i] += IXGBE_READ_REG(hw, IXGBE_QBTC(i));
+ hwstats->qbrc[i] += IXGBE_READ_REG(hw, IXGBE_QBRC(i));
hwstats->pxonrxc[i] +=
IXGBE_READ_REG(hw, IXGBE_PXONRXC(i));
break;
@@ -5488,9 +5489,21 @@ void ixgbe_update_stats(struct ixgbe_adapter *adapter)
default:
break;
}
- hwstats->pxontxc[i] += IXGBE_READ_REG(hw, IXGBE_PXONTXC(i));
- hwstats->pxofftxc[i] += IXGBE_READ_REG(hw, IXGBE_PXOFFTXC(i));
}
+
+ /*16 register reads */
+ for (i = 0; i < 16; i++) {
+ hwstats->qptc[i] += IXGBE_READ_REG(hw, IXGBE_QPTC(i));
+ hwstats->qprc[i] += IXGBE_READ_REG(hw, IXGBE_QPRC(i));
+ if ((hw->mac.type == ixgbe_mac_82599EB) ||
+ (hw->mac.type == ixgbe_mac_X540)) {
+ hwstats->qbtc[i] += IXGBE_READ_REG(hw, IXGBE_QBTC_L(i));
+ IXGBE_READ_REG(hw, IXGBE_QBTC_H(i)); /* to clear */
+ hwstats->qbrc[i] += IXGBE_READ_REG(hw, IXGBE_QBRC_L(i));
+ IXGBE_READ_REG(hw, IXGBE_QBRC_H(i)); /* to clear */
+ }
+ }
+
hwstats->gprc += IXGBE_READ_REG(hw, IXGBE_GPRC);
/* work around hardware counting issue */
hwstats->gprc -= missed_rx;
@@ -5550,7 +5563,6 @@ void ixgbe_update_stats(struct ixgbe_adapter *adapter)
hwstats->lxontxc += lxon;
lxoff = IXGBE_READ_REG(hw, IXGBE_LXOFFTXC);
hwstats->lxofftxc += lxoff;
- hwstats->ruc += IXGBE_READ_REG(hw, IXGBE_RUC);
hwstats->gptc += IXGBE_READ_REG(hw, IXGBE_GPTC);
hwstats->mptc += IXGBE_READ_REG(hw, IXGBE_MPTC);
/*
--
1.7.6
next prev parent reply other threads:[~2011-09-17 2:16 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-09-17 2:15 [net-next 00/11][pull request] Intel Wired LAN Driver Updates Jeff Kirsher
2011-09-17 2:15 ` [net-next 01/11] ixgb: convert to ndo_fix_features Jeff Kirsher
2011-09-17 2:50 ` Joe Perches
2011-09-17 13:21 ` Michał Mirosław
2011-09-20 0:02 ` Jeff Kirsher
2011-09-23 20:56 ` Michał Mirosław
2011-09-24 4:47 ` Jeff Kirsher
2011-10-07 20:47 ` Michał Mirosław
2011-10-08 2:04 ` Jeff Kirsher
2011-09-17 2:15 ` [net-next 02/11] ixgbe: remove redundant configuration of tx_sample_rate Jeff Kirsher
2011-09-17 2:15 ` [net-next 03/11] v2 ixgbe: Update packet buffer reservation to correct fdir headroom size Jeff Kirsher
2011-09-17 2:15 ` [net-next 04/11] ixgbe: make ixgbe_up and ixgbe_up_complete void functions Jeff Kirsher
2011-09-17 2:15 ` [net-next 05/11] ixgbe: Add missing code for enabling overheat sensor interrupt Jeff Kirsher
2011-09-17 2:15 ` [net-next 06/11] ixgbe: Add SFP support for missed 82598 PHY Jeff Kirsher
2011-09-17 2:15 ` [net-next 07/11] ixgbe: drop adapter from ixgbe_fso call documentation Jeff Kirsher
2011-09-17 2:15 ` [net-next 08/11] ixgbe: Make better use of memory allocations in one-buffer mode w/ RSC Jeff Kirsher
2011-09-17 2:15 ` Jeff Kirsher [this message]
2011-09-17 2:15 ` [net-next 10/11] ixgbe: fix FCRTL/H register dump for X540 Jeff Kirsher
2011-09-17 2:15 ` [net-next 11/11] ixgbe: remove duplicate netif_tx_start_all_queues Jeff Kirsher
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1316225752-1709-10-git-send-email-jeffrey.t.kirsher@intel.com \
--to=jeffrey.t.kirsher@intel.com \
--cc=davem@davemloft.net \
--cc=emil.s.tantilov@intel.com \
--cc=gospo@redhat.com \
--cc=jonathan.lynch@thenowfactory.com \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).