From: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
To: davem@davemloft.net
Cc: Jeff Kirsher <jeffrey.t.kirsher@intel.com>,
netdev@vger.kernel.org, gospo@redhat.com
Subject: [net-next 00/10][pull request] Intel Wired LAN Drivers Update
Date: Sat, 24 Sep 2011 02:17:33 -0700 [thread overview]
Message-ID: <1316855863-6091-1-git-send-email-jeffrey.t.kirsher@intel.com> (raw)
The following series contains updates to e1000, ixgbe, ixgbevf and
if_link. The e1000 patch is a fix to an issue seen qemu-kvm. The
if_link patch adds an additional parameter for spoof checking,
and there is a subsequent ixgbe patch to implement the if_link
parameter. The ixgbevf patch fixes an issue with trunk VLAN.
The remainder of the patches for ixgbe include:
- add thermal sensor support
- add ECC warning for legacy interrupts
- cleanup/update interrupt throttle rate logic
- cleanup/update X540 code
NOTE- After the discussion on conflating NAPI and interrupt moderation,
I have a patch in validation to remove the tie between work_limit and
interrupt moderation for ixgbe, which is not in this series. I mention
this because the cleanup to interrupt throttle rate logic patch
still contains the code that ties NAPI and interrupt moderation.
The following are changes since commit 7777de9af54a1402c79bf7663b38ff5ba308dd45:
qlcnic: Change CDRP function
and are available in the git repository at:
git://github.com/Jkirsher/net-next.git
Dean Nelson (1):
e1000: don't enable dma receives until after dma address has been
setup
Don Skidmore (2):
ixgbe: cleanup ixgbe_setup_gpie() for X540
ixgbe: add ECC warning for legacy interrupts
Emil Tantilov (1):
ixgbe: Cleanup q_vector interrupt throttle rate logic
Greg Rose (3):
ixgbevf: Fix broken trunk vlan
if_link: Add additional parameter to IFLA_VF_INFO for spoof checking
ixgbe: Add new netdev op to turn spoof checking on or off per VF
Jacob Keller (1):
ixgbe add thermal sensor support for x540 hardware
John Fastabend (1):
ixgbe: update {P}FC thresholds to account for X540 and loopback
Vasu Dev (1):
ixgbe: disable LLI for FCoE
drivers/net/ethernet/intel/e1000/e1000_main.c | 6 +-
drivers/net/ethernet/intel/ixgbe/ixgbe.h | 28 +-
drivers/net/ethernet/intel/ixgbe/ixgbe_82598.c | 8 +-
drivers/net/ethernet/intel/ixgbe/ixgbe_common.c | 12 +-
drivers/net/ethernet/intel/ixgbe/ixgbe_dcb.h | 1 -
drivers/net/ethernet/intel/ixgbe/ixgbe_dcb_82598.c | 9 +-
drivers/net/ethernet/intel/ixgbe/ixgbe_dcb_82599.c | 8 +-
drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c | 153 +++-------
drivers/net/ethernet/intel/ixgbe/ixgbe_fcoe.c | 4 +-
drivers/net/ethernet/intel/ixgbe/ixgbe_main.c | 299 +++++++++++++++-----
drivers/net/ethernet/intel/ixgbe/ixgbe_sriov.c | 48 +++-
drivers/net/ethernet/intel/ixgbe/ixgbe_sriov.h | 1 +
drivers/net/ethernet/intel/ixgbe/ixgbe_type.h | 64 ++++-
drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c | 6 +-
include/linux/if_link.h | 7 +
include/linux/netdevice.h | 3 +
net/core/rtnetlink.c | 25 ++-
17 files changed, 442 insertions(+), 240 deletions(-)
--
1.7.6.2
next reply other threads:[~2011-09-24 9:17 UTC|newest]
Thread overview: 30+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-09-24 9:17 Jeff Kirsher [this message]
2011-09-24 9:17 ` [net-next 01/10] e1000: don't enable dma receives until after dma address has been setup Jeff Kirsher
2011-09-24 9:17 ` [net-next 02/10] ixgbevf: Fix broken trunk vlan Jeff Kirsher
2011-09-24 16:33 ` Jesse Gross
2011-09-25 5:47 ` Jeff Kirsher
2011-09-26 15:57 ` Rose, Gregory V
2011-09-26 23:08 ` Jesse Gross
2011-09-26 23:24 ` Rose, Gregory V
2011-09-27 0:54 ` Jesse Gross
2011-09-27 16:39 ` Rose, Gregory V
2011-09-27 16:49 ` Jesse Gross
2011-09-24 9:17 ` [net-next 03/10] ixgbe: Cleanup q_vector interrupt throttle rate logic Jeff Kirsher
2011-09-24 9:17 ` [net-next 04/10] ixgbe: disable LLI for FCoE Jeff Kirsher
2011-09-24 9:17 ` [net-next 05/10] if_link: Add additional parameter to IFLA_VF_INFO for spoof checking Jeff Kirsher
2011-09-24 16:40 ` Ben Hutchings
2011-09-25 5:54 ` Jeff Kirsher
2011-09-26 16:06 ` Rose, Gregory V
2011-09-25 17:22 ` Stephen Hemminger
2011-09-25 20:06 ` Ben Hutchings
2011-09-26 16:14 ` Stephen Hemminger
2011-09-26 16:32 ` Rose, Gregory V
2011-09-26 16:37 ` Stephen Hemminger
2011-09-26 16:18 ` Rose, Gregory V
2011-09-26 16:21 ` Stephen Hemminger
2011-09-26 16:57 ` Rose, Gregory V
2011-09-24 9:17 ` [net-next 06/10] ixgbe: Add new netdev op to turn spoof checking on or off per VF Jeff Kirsher
2011-09-24 9:17 ` [net-next 07/10] ixgbe: update {P}FC thresholds to account for X540 and loopback Jeff Kirsher
2011-09-24 9:17 ` [net-next 08/10] ixgbe add thermal sensor support for x540 hardware Jeff Kirsher
2011-09-24 9:17 ` [net-next 09/10] ixgbe: cleanup ixgbe_setup_gpie() for X540 Jeff Kirsher
2011-09-24 9:17 ` [net-next 10/10] ixgbe: add ECC warning for legacy interrupts Jeff Kirsher
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1316855863-6091-1-git-send-email-jeffrey.t.kirsher@intel.com \
--to=jeffrey.t.kirsher@intel.com \
--cc=davem@davemloft.net \
--cc=gospo@redhat.com \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).