[net-next 00/11 v2][pull request] Intel Wired LAN Driver Updates

[net-next 00/11 v2][pull request] Intel Wired LAN Driver Updates

[Jeff Kirsher]

The following series contains updates to e1000e and ixgbe. The one
patch for e1000e makes function tables const, thanks to Stephen
Hemminger for reporting this.  The remaining patches are for ixgbe,
and the contain the following:

 - minor cleanups
 - add support for 82599 device and ethtool -E support
 - removal of a PHY which is not used in production silicon

v2- Updated patch 11 with the suggested changes from Ben Hutchings

The following are changes since commit 56fd49e399ce1d82200fad5b8924d4e35a587809:
  bna: Driver Version changed to 3.0.2.2
and are available in the git repository at
  git://github.com/Jkirsher/net-next.git

Emil Tantilov (8):
  ixgbe: prevent link checks while resetting
  ixgbe: clear the data field in ixgbe_read_i2c_byte_generic
  ixgbe: remove return code for functions that always return 0
  ixgbe: add support for new 82599 device
  ixgbe: send MFLCN to ethtool
  ixgbe: do not disable flow control in ixgbe_check_mac_link
  ixgbe: remove instances of ixgbe_phy_aq for 82598 and 82599
  ixgbe: allow eeprom writes via ethtool

Jacob Keller (1):
  ixgbe: fix driver version initialization in firmware

Jeff Kirsher (1):
  e1000e: make function tables const

Mika Lansirinne (1):
  ixgbe: get pauseparam autoneg

 drivers/net/ethernet/intel/e1000e/80003es2lan.c  |    8 +-
 drivers/net/ethernet/intel/e1000e/82571.c        |   20 +++---
 drivers/net/ethernet/intel/e1000e/e1000.h        |   28 ++++----
 drivers/net/ethernet/intel/e1000e/ich8lan.c      |   16 +++---
 drivers/net/ethernet/intel/ixgbe/ixgbe_82598.c   |    8 +--
 drivers/net/ethernet/intel/ixgbe/ixgbe_82599.c   |    7 +--
 drivers/net/ethernet/intel/ixgbe/ixgbe_common.c  |    6 --
 drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c |   74 +++++++++++++++++++---
 drivers/net/ethernet/intel/ixgbe/ixgbe_main.c    |   12 +++-
 drivers/net/ethernet/intel/ixgbe/ixgbe_phy.c     |   33 +++-------
 drivers/net/ethernet/intel/ixgbe/ixgbe_type.h    |    1 +
 drivers/net/ethernet/intel/ixgbe/ixgbe_x540.c    |    1 +
 12 files changed, 125 insertions(+), 89 deletions(-)

-- 
1.7.6.2

Re: [net-next 00/11 v2][pull request] Intel Wired LAN Driver Updates

[Jeff Kirsher]

[-- Attachment #1: Type: text/plain, Size: 2384 bytes --]

On Fri, 2011-09-30 at 21:52 -0700, Kirsher, Jeffrey T wrote:
> The following series contains updates to e1000e and ixgbe. The one
> patch for e1000e makes function tables const, thanks to Stephen
> Hemminger for reporting this.  The remaining patches are for ixgbe,
> and the contain the following:
> 
>  - minor cleanups
>  - add support for 82599 device and ethtool -E support
>  - removal of a PHY which is not used in production silicon
> 
> v2- Updated patch 11 with the suggested changes from Ben Hutchings
> 
> The following are changes since commit 56fd49e399ce1d82200fad5b8924d4e35a587809:
>   bna: Driver Version changed to 3.0.2.2
> and are available in the git repository at
>   git://github.com/Jkirsher/net-next.git
> 
> Emil Tantilov (8):
>   ixgbe: prevent link checks while resetting
>   ixgbe: clear the data field in ixgbe_read_i2c_byte_generic
>   ixgbe: remove return code for functions that always return 0
>   ixgbe: add support for new 82599 device
>   ixgbe: send MFLCN to ethtool
>   ixgbe: do not disable flow control in ixgbe_check_mac_link
>   ixgbe: remove instances of ixgbe_phy_aq for 82598 and 82599
>   ixgbe: allow eeprom writes via ethtool
> 
> Jacob Keller (1):
>   ixgbe: fix driver version initialization in firmware
> 
> Jeff Kirsher (1):
>   e1000e: make function tables const
> 
> Mika Lansirinne (1):
>   ixgbe: get pauseparam autoneg
> 
>  drivers/net/ethernet/intel/e1000e/80003es2lan.c  |    8 +-
>  drivers/net/ethernet/intel/e1000e/82571.c        |   20 +++---
>  drivers/net/ethernet/intel/e1000e/e1000.h        |   28 ++++----
>  drivers/net/ethernet/intel/e1000e/ich8lan.c      |   16 +++---
>  drivers/net/ethernet/intel/ixgbe/ixgbe_82598.c   |    8 +--
>  drivers/net/ethernet/intel/ixgbe/ixgbe_82599.c   |    7 +--
>  drivers/net/ethernet/intel/ixgbe/ixgbe_common.c  |    6 --
>  drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c |   74 +++++++++++++++++++---
>  drivers/net/ethernet/intel/ixgbe/ixgbe_main.c    |   12 +++-
>  drivers/net/ethernet/intel/ixgbe/ixgbe_phy.c     |   33 +++-------
>  drivers/net/ethernet/intel/ixgbe/ixgbe_type.h    |    1 +
>  drivers/net/ethernet/intel/ixgbe/ixgbe_x540.c    |    1 +
>  12 files changed, 125 insertions(+), 89 deletions(-)
> 

I did not re-send patches 1-10 of the series since there was no change.
I can re-send if necessary...

[-- Attachment #2: This is a digitally signed message part --]
[-- Type: application/pgp-signature, Size: 490 bytes --]

[net-next 00/11 v2][pull request] Intel Wired LAN Driver Updates

[Jeff Kirsher]

The following series contains updates to e1000e and igb.  This
version of the series contains the following changes:

- Added the e1000e bug fix patch
- Dropped the igb patch "igb: Use node specific allocations for
  the q_vectors and rings" based on feedback

Based on the feedback, I am working on re-working the igb patch that
was dropped in this series and will re-submit it later on.

The remain 10 igb patches are unchanged from the previous pull request
and are the continuation of the cleanups and refactoring that Alex has done.
After this series there are 4-5 more patches to complete the work
that Alex has done on igb.

The following are changes since commit 3ed6f6958c0ac21958285d8648f14d34da4bbcb3:
  ll_temac: convert to SKB paged frag API.
and are available in the git repository at
  git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net-next.git
or
  git://github.com/Jkirsher/net-next.git

Alexander Duyck (10):
  igb: push data into first igb_tx_buffer sooner to reduce stack usage
  igb: avoid unnecessary conversions from u16 to int
  igb: Consolidate all of the ring feature flags into a single value
  igb: Move ITR related data into work container within the q_vector
  igb: cleanup IVAR configuration
  igb: retire the RX_CSUM flag and use the netdev flag instead
  igb: leave staterr in place and instead us a helper function to check
    bits
  igb: fix recent VLAN changes that would leave VLANs disabled after
    reset
  igb: move TX hang check flag into ring->flags
  igb: add support for NETIF_F_RXHASH

Bruce Allan (1):
  e1000e: locking bug introduced by commit 67fd4fcb

 drivers/net/ethernet/intel/e1000e/e1000.h      |    1 +
 drivers/net/ethernet/intel/e1000e/ich8lan.c    |   21 +-
 drivers/net/ethernet/intel/igb/e1000_defines.h |    3 +
 drivers/net/ethernet/intel/igb/igb.h           |   50 ++-
 drivers/net/ethernet/intel/igb/igb_ethtool.c   |   14 +-
 drivers/net/ethernet/intel/igb/igb_main.c      |  595 ++++++++++++------------
 6 files changed, 347 insertions(+), 337 deletions(-)

-- 
1.7.6.4

Re: [net-next 00/11 v2][pull request] Intel Wired LAN Driver Updates

[David Miller]

From: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Date: Tue, 11 Oct 2011 08:45:41 -0700

> The following series contains updates to e1000e and igb.  This
> version of the series contains the following changes:
> 
> - Added the e1000e bug fix patch
> - Dropped the igb patch "igb: Use node specific allocations for
>   the q_vectors and rings" based on feedback
> 
> Based on the feedback, I am working on re-working the igb patch that
> was dropped in this series and will re-submit it later on.
> 
> The remain 10 igb patches are unchanged from the previous pull request
> and are the continuation of the cleanups and refactoring that Alex has done.
> After this series there are 4-5 more patches to complete the work
> that Alex has done on igb.
> 
> The following are changes since commit 3ed6f6958c0ac21958285d8648f14d34da4bbcb3:
>   ll_temac: convert to SKB paged frag API.
> and are available in the git repository at
>   git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net-next.git

Pulled, thanks Jeff.

[net-next 00/11 v2][pull request] Intel Wired LAN Driver Updates

[Jeff Kirsher]

The following series contains updates to ixgbe and igb.  This
version of the series contains the following changes:

- ixgbe add FCoE stats, add protection from invalid DMA and fix
  check for change in FCoE priority
- igb version bump, fix sparse warnings and finish up the cleanup
  work of igb by Alex Duyck.

- v2: drop the "igb: move DMA Coalescing feature code into separate function."
  patch while Carolyn fixes the patch based on David Miller's comments.

The following are changes since commit 9687c637388f63b87fcc18eee6e65bcfca4f49ca:
  Merge branch 'for-davem' of git://git.infradead.org/users/linville/wireless-next
and are available in the git repository at
  git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net-next.git
or
  git://github.com/Jkirsher/net-next.git

Akeem G. Abodunrin (1):
  igb: Loopback functionality supports for i350 devices

Alexander Duyck (5):
  igb: avoid unnecessarily creating a local copy of the q_vector
  igb: Make certain one vector is always assigned in igb_request_irq
  igb: Fix features that are currently 82580 only and should also be
    i350
  igb: Drop unnecessary write of E1000_IMS from igb_msix_other
  igb: Add workaround for byte swapped VLAN on i350 local traffic

Amir Hanania (1):
  ixgbe: Add FCoE DDP allocation failure counters to ethtool stats.

Carolyn Wyborny (1):
  igb: Version bump.

Emil Tantilov (1):
  igb: fix static function warnings reported by sparse

Greg Rose (1):
  ixgbe: Add protection from VF invalid target DMA

Mark Rustad (1):
  ixgbe: Correct check for change in FCoE priority

 drivers/net/ethernet/intel/igb/e1000_82575.c     |   38 +++--
 drivers/net/ethernet/intel/igb/e1000_defines.h   |    1 +
 drivers/net/ethernet/intel/igb/e1000_regs.h      |    1 +
 drivers/net/ethernet/intel/igb/igb.h             |    1 +
 drivers/net/ethernet/intel/igb/igb_main.c        |  112 ++++++-------
 drivers/net/ethernet/intel/ixgbe/ixgbe.h         |    4 +
 drivers/net/ethernet/intel/ixgbe/ixgbe_dcb_nl.c  |   12 ++-
 drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c |    2 +
 drivers/net/ethernet/intel/ixgbe/ixgbe_fcoe.c    |   44 ++++--
 drivers/net/ethernet/intel/ixgbe/ixgbe_fcoe.h    |    2 +
 drivers/net/ethernet/intel/ixgbe/ixgbe_main.c    |  189 +++++++++++++++++++++-
 drivers/net/ethernet/intel/ixgbe/ixgbe_type.h    |    2 +
 12 files changed, 324 insertions(+), 84 deletions(-)

-- 
1.7.6.4

[net-next 01/11] ixgbe: Add protection from VF invalid target DMA

[Jeff Kirsher]

From: Greg Rose <gregory.v.rose@intel.com>

It is possible for a VF to set an invalid target DMA address in its
Tx/Rx descriptor buffer pointers.  The workarounds in this patch
will guard against such an event and issue a VFLR to the VF in response.
The VFLR will shut down the VF until an administrator can take action
to investigate the event and correct the problem.

Signed-off-by: Greg Rose <gregory.v.rose@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/ixgbe/ixgbe.h      |    4 +
 drivers/net/ethernet/intel/ixgbe/ixgbe_main.c |  172 ++++++++++++++++++++++++-
 2 files changed, 175 insertions(+), 1 deletions(-)

diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe.h b/drivers/net/ethernet/intel/ixgbe/ixgbe.h
index 38940d7..c1f76aa 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe.h
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe.h
@@ -116,6 +116,8 @@
 #define MAX_EMULATION_MAC_ADDRS         16
 #define IXGBE_MAX_PF_MACVLANS           15
 #define VMDQ_P(p)   ((p) + adapter->num_vfs)
+#define IXGBE_82599_VF_DEVICE_ID        0x10ED
+#define IXGBE_X540_VF_DEVICE_ID         0x1515
 
 struct vf_data_storage {
 	unsigned char vf_mac_addresses[ETH_ALEN];
@@ -512,6 +514,8 @@ struct ixgbe_adapter {
 	struct hlist_head fdir_filter_list;
 	union ixgbe_atr_input fdir_mask;
 	int fdir_filter_count;
+	u32 timer_event_accumulator;
+	u32 vferr_refcount;
 };
 
 struct ixgbe_fdir_filter {
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
index 1519a23..b95c6e9 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
@@ -6112,6 +6112,51 @@ static void ixgbe_sfp_link_config_subtask(struct ixgbe_adapter *adapter)
 	clear_bit(__IXGBE_IN_SFP_INIT, &adapter->state);
 }
 
+#ifdef CONFIG_PCI_IOV
+static void ixgbe_check_for_bad_vf(struct ixgbe_adapter *adapter)
+{
+	int vf;
+	struct ixgbe_hw *hw = &adapter->hw;
+	struct net_device *netdev = adapter->netdev;
+	u32 gpc;
+	u32 ciaa, ciad;
+
+	gpc = IXGBE_READ_REG(hw, IXGBE_TXDGPC);
+	if (gpc) /* If incrementing then no need for the check below */
+		return;
+	/*
+	 * Check to see if a bad DMA write target from an errant or
+	 * malicious VF has caused a PCIe error.  If so then we can
+	 * issue a VFLR to the offending VF(s) and then resume without
+	 * requesting a full slot reset.
+	 */
+
+	for (vf = 0; vf < adapter->num_vfs; vf++) {
+		ciaa = (vf << 16) | 0x80000000;
+		/* 32 bit read so align, we really want status at offset 6 */
+		ciaa |= PCI_COMMAND;
+		IXGBE_WRITE_REG(hw, IXGBE_CIAA_82599, ciaa);
+		ciad = IXGBE_READ_REG(hw, IXGBE_CIAD_82599);
+		ciaa &= 0x7FFFFFFF;
+		/* disable debug mode asap after reading data */
+		IXGBE_WRITE_REG(hw, IXGBE_CIAA_82599, ciaa);
+		/* Get the upper 16 bits which will be the PCI status reg */
+		ciad >>= 16;
+		if (ciad & PCI_STATUS_REC_MASTER_ABORT) {
+			netdev_err(netdev, "VF %d Hung DMA\n", vf);
+			/* Issue VFLR */
+			ciaa = (vf << 16) | 0x80000000;
+			ciaa |= 0xA8;
+			IXGBE_WRITE_REG(hw, IXGBE_CIAA_82599, ciaa);
+			ciad = 0x00008000;  /* VFLR */
+			IXGBE_WRITE_REG(hw, IXGBE_CIAD_82599, ciad);
+			ciaa &= 0x7FFFFFFF;
+			IXGBE_WRITE_REG(hw, IXGBE_CIAA_82599, ciaa);
+		}
+	}
+}
+
+#endif
 /**
  * ixgbe_service_timer - Timer Call-back
  * @data: pointer to adapter cast into an unsigned long
@@ -6120,17 +6165,49 @@ static void ixgbe_service_timer(unsigned long data)
 {
 	struct ixgbe_adapter *adapter = (struct ixgbe_adapter *)data;
 	unsigned long next_event_offset;
+	bool ready = true;
 
+#ifdef CONFIG_PCI_IOV
+	ready = false;
+
+	/*
+	 * don't bother with SR-IOV VF DMA hang check if there are
+	 * no VFs or the link is down
+	 */
+	if (!adapter->num_vfs ||
+	    (adapter->flags & IXGBE_FLAG_NEED_LINK_UPDATE)) {
+		ready = true;
+		goto normal_timer_service;
+	}
+
+	/* If we have VFs allocated then we must check for DMA hangs */
+	ixgbe_check_for_bad_vf(adapter);
+	next_event_offset = HZ / 50;
+	adapter->timer_event_accumulator++;
+
+	if (adapter->timer_event_accumulator >= 100) {
+		ready = true;
+		adapter->timer_event_accumulator = 0;
+	}
+
+	goto schedule_event;
+
+normal_timer_service:
+#endif
 	/* poll faster when waiting for link */
 	if (adapter->flags & IXGBE_FLAG_NEED_LINK_UPDATE)
 		next_event_offset = HZ / 10;
 	else
 		next_event_offset = HZ * 2;
 
+#ifdef CONFIG_PCI_IOV
+schedule_event:
+#endif
 	/* Reset the timer */
 	mod_timer(&adapter->service_timer, next_event_offset + jiffies);
 
-	ixgbe_service_event_schedule(adapter);
+	if (ready)
+		ixgbe_service_event_schedule(adapter);
 }
 
 static void ixgbe_reset_subtask(struct ixgbe_adapter *adapter)
@@ -7717,6 +7794,91 @@ static pci_ers_result_t ixgbe_io_error_detected(struct pci_dev *pdev,
 	struct ixgbe_adapter *adapter = pci_get_drvdata(pdev);
 	struct net_device *netdev = adapter->netdev;
 
+#ifdef CONFIG_PCI_IOV
+	struct pci_dev *bdev, *vfdev;
+	u32 dw0, dw1, dw2, dw3;
+	int vf, pos;
+	u16 req_id, pf_func;
+
+	if (adapter->hw.mac.type == ixgbe_mac_82598EB ||
+	    adapter->num_vfs == 0)
+		goto skip_bad_vf_detection;
+
+	bdev = pdev->bus->self;
+	while (bdev && (bdev->pcie_type != PCI_EXP_TYPE_ROOT_PORT))
+		bdev = bdev->bus->self;
+
+	if (!bdev)
+		goto skip_bad_vf_detection;
+
+	pos = pci_find_ext_capability(bdev, PCI_EXT_CAP_ID_ERR);
+	if (!pos)
+		goto skip_bad_vf_detection;
+
+	pci_read_config_dword(bdev, pos + PCI_ERR_HEADER_LOG, &dw0);
+	pci_read_config_dword(bdev, pos + PCI_ERR_HEADER_LOG + 4, &dw1);
+	pci_read_config_dword(bdev, pos + PCI_ERR_HEADER_LOG + 8, &dw2);
+	pci_read_config_dword(bdev, pos + PCI_ERR_HEADER_LOG + 12, &dw3);
+
+	req_id = dw1 >> 16;
+	/* On the 82599 if bit 7 of the requestor ID is set then it's a VF */
+	if (!(req_id & 0x0080))
+		goto skip_bad_vf_detection;
+
+	pf_func = req_id & 0x01;
+	if ((pf_func & 1) == (pdev->devfn & 1)) {
+		unsigned int device_id;
+
+		vf = (req_id & 0x7F) >> 1;
+		e_dev_err("VF %d has caused a PCIe error\n", vf);
+		e_dev_err("TLP: dw0: %8.8x\tdw1: %8.8x\tdw2: "
+				"%8.8x\tdw3: %8.8x\n",
+		dw0, dw1, dw2, dw3);
+		switch (adapter->hw.mac.type) {
+		case ixgbe_mac_82599EB:
+			device_id = IXGBE_82599_VF_DEVICE_ID;
+			break;
+		case ixgbe_mac_X540:
+			device_id = IXGBE_X540_VF_DEVICE_ID;
+			break;
+		default:
+			device_id = 0;
+			break;
+		}
+
+		/* Find the pci device of the offending VF */
+		vfdev = pci_get_device(IXGBE_INTEL_VENDOR_ID, device_id, NULL);
+		while (vfdev) {
+			if (vfdev->devfn == (req_id & 0xFF))
+				break;
+			vfdev = pci_get_device(IXGBE_INTEL_VENDOR_ID,
+					       device_id, vfdev);
+		}
+		/*
+		 * There's a slim chance the VF could have been hot plugged,
+		 * so if it is no longer present we don't need to issue the
+		 * VFLR.  Just clean up the AER in that case.
+		 */
+		if (vfdev) {
+			e_dev_err("Issuing VFLR to VF %d\n", vf);
+			pci_write_config_dword(vfdev, 0xA8, 0x00008000);
+		}
+
+		pci_cleanup_aer_uncorrect_error_status(pdev);
+	}
+
+	/*
+	 * Even though the error may have occurred on the other port
+	 * we still need to increment the vf error reference count for
+	 * both ports because the I/O resume function will be called
+	 * for both of them.
+	 */
+	adapter->vferr_refcount++;
+
+	return PCI_ERS_RESULT_RECOVERED;
+
+skip_bad_vf_detection:
+#endif /* CONFIG_PCI_IOV */
 	netif_device_detach(netdev);
 
 	if (state == pci_channel_io_perm_failure)
@@ -7779,6 +7941,14 @@ static void ixgbe_io_resume(struct pci_dev *pdev)
 	struct ixgbe_adapter *adapter = pci_get_drvdata(pdev);
 	struct net_device *netdev = adapter->netdev;
 
+#ifdef CONFIG_PCI_IOV
+	if (adapter->vferr_refcount) {
+		e_info(drv, "Resuming after VF err\n");
+		adapter->vferr_refcount--;
+		return;
+	}
+
+#endif
 	if (netif_running(netdev))
 		ixgbe_up(adapter);
 
-- 
1.7.6.4

[net-next 02/11] ixgbe: Add FCoE DDP allocation failure counters to ethtool stats.

[Jeff Kirsher]

From: Amir Hanania <amir.hanania@intel.com>

Add 2 new counters to ethtool:
	1. Count DDP allocation failure since we max the number of buffers
		allowed in one DDP context.
	2. Count DDP allocation failure since we max the number of buffers
		allowed in one DDP context when we alloc an extra buffer.

Signed-off-by: Amir Hanania <amir.hanania@intel.com>
Tested-by: Ross Brattain <ross.b.brattain@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c |    2 +
 drivers/net/ethernet/intel/ixgbe/ixgbe_fcoe.c    |   44 ++++++++++++++++-----
 drivers/net/ethernet/intel/ixgbe/ixgbe_fcoe.h    |    2 +
 drivers/net/ethernet/intel/ixgbe/ixgbe_main.c    |   17 ++++++++
 drivers/net/ethernet/intel/ixgbe/ixgbe_type.h    |    2 +
 5 files changed, 56 insertions(+), 11 deletions(-)

diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c
index 18520ce..e102ff6 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c
@@ -113,6 +113,8 @@ static struct ixgbe_stats ixgbe_gstrings_stats[] = {
 	{"rx_fcoe_dropped", IXGBE_STAT(stats.fcoerpdc)},
 	{"rx_fcoe_packets", IXGBE_STAT(stats.fcoeprc)},
 	{"rx_fcoe_dwords", IXGBE_STAT(stats.fcoedwrc)},
+	{"fcoe_noddp", IXGBE_STAT(stats.fcoe_noddp)},
+	{"fcoe_noddp_ext_buff", IXGBE_STAT(stats.fcoe_noddp_ext_buff)},
 	{"tx_fcoe_packets", IXGBE_STAT(stats.fcoeptc)},
 	{"tx_fcoe_dwords", IXGBE_STAT(stats.fcoedwtc)},
 #endif /* IXGBE_FCOE */
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_fcoe.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_fcoe.c
index 323f452..df3b1be 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_fcoe.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_fcoe.c
@@ -145,6 +145,7 @@ static int ixgbe_fcoe_ddp_setup(struct net_device *netdev, u16 xid,
 	u32 fcbuff, fcdmarw, fcfltrw, fcrxctl;
 	dma_addr_t addr = 0;
 	struct pci_pool *pool;
+	unsigned int cpu;
 
 	if (!netdev || !sgl)
 		return 0;
@@ -182,7 +183,8 @@ static int ixgbe_fcoe_ddp_setup(struct net_device *netdev, u16 xid,
 	}
 
 	/* alloc the udl from per cpu ddp pool */
-	pool = *per_cpu_ptr(fcoe->pool, get_cpu());
+	cpu = get_cpu();
+	pool = *per_cpu_ptr(fcoe->pool, cpu);
 	ddp->udl = pci_pool_alloc(pool, GFP_ATOMIC, &ddp->udp);
 	if (!ddp->udl) {
 		e_err(drv, "failed allocated ddp context\n");
@@ -199,9 +201,7 @@ static int ixgbe_fcoe_ddp_setup(struct net_device *netdev, u16 xid,
 		while (len) {
 			/* max number of buffers allowed in one DDP context */
 			if (j >= IXGBE_BUFFCNT_MAX) {
-				e_err(drv, "xid=%x:%d,%d,%d:addr=%llx "
-				      "not enough descriptors\n",
-				      xid, i, j, dmacount, (u64)addr);
+				*per_cpu_ptr(fcoe->pcpu_noddp, cpu) += 1;
 				goto out_noddp_free;
 			}
 
@@ -241,12 +241,7 @@ static int ixgbe_fcoe_ddp_setup(struct net_device *netdev, u16 xid,
 	 */
 	if (lastsize == bufflen) {
 		if (j >= IXGBE_BUFFCNT_MAX) {
-			printk_once("Will NOT use DDP since there are not "
-				    "enough user buffers. We need an  extra "
-				    "buffer because lastsize is bufflen. "
-				    "xid=%x:%d,%d,%d:addr=%llx\n",
-				    xid, i, j, dmacount, (u64)addr);
-
+			*per_cpu_ptr(fcoe->pcpu_noddp_ext_buff, cpu) += 1;
 			goto out_noddp_free;
 		}
 
@@ -600,6 +595,7 @@ void ixgbe_configure_fcoe(struct ixgbe_adapter *adapter)
 	struct ixgbe_hw *hw = &adapter->hw;
 	struct ixgbe_fcoe *fcoe = &adapter->fcoe;
 	struct ixgbe_ring_feature *f = &adapter->ring_feature[RING_F_FCOE];
+	unsigned int cpu;
 
 	if (!fcoe->pool) {
 		spin_lock_init(&fcoe->lock);
@@ -627,6 +623,24 @@ void ixgbe_configure_fcoe(struct ixgbe_adapter *adapter)
 			e_err(drv, "failed to map extra DDP buffer\n");
 			goto out_extra_ddp_buffer;
 		}
+
+		/* Alloc per cpu mem to count the ddp alloc failure number */
+		fcoe->pcpu_noddp = alloc_percpu(u64);
+		if (!fcoe->pcpu_noddp) {
+			e_err(drv, "failed to alloc noddp counter\n");
+			goto out_pcpu_noddp_alloc_fail;
+		}
+
+		fcoe->pcpu_noddp_ext_buff = alloc_percpu(u64);
+		if (!fcoe->pcpu_noddp_ext_buff) {
+			e_err(drv, "failed to alloc noddp extra buff cnt\n");
+			goto out_pcpu_noddp_extra_buff_alloc_fail;
+		}
+
+		for_each_possible_cpu(cpu) {
+			*per_cpu_ptr(fcoe->pcpu_noddp, cpu) = 0;
+			*per_cpu_ptr(fcoe->pcpu_noddp_ext_buff, cpu) = 0;
+		}
 	}
 
 	/* Enable L2 eth type filter for FCoE */
@@ -664,7 +678,13 @@ void ixgbe_configure_fcoe(struct ixgbe_adapter *adapter)
 	IXGBE_WRITE_REG(hw, IXGBE_FCRXCTRL, IXGBE_FCRXCTRL_FCCRCBO |
 			(FC_FCOE_VER << IXGBE_FCRXCTRL_FCOEVER_SHIFT));
 	return;
-
+out_pcpu_noddp_extra_buff_alloc_fail:
+	free_percpu(fcoe->pcpu_noddp);
+out_pcpu_noddp_alloc_fail:
+	dma_unmap_single(&adapter->pdev->dev,
+			 fcoe->extra_ddp_buffer_dma,
+			 IXGBE_FCBUFF_MIN,
+			 DMA_FROM_DEVICE);
 out_extra_ddp_buffer:
 	kfree(fcoe->extra_ddp_buffer);
 out_ddp_pools:
@@ -693,6 +713,8 @@ void ixgbe_cleanup_fcoe(struct ixgbe_adapter *adapter)
 			 fcoe->extra_ddp_buffer_dma,
 			 IXGBE_FCBUFF_MIN,
 			 DMA_FROM_DEVICE);
+	free_percpu(fcoe->pcpu_noddp);
+	free_percpu(fcoe->pcpu_noddp_ext_buff);
 	kfree(fcoe->extra_ddp_buffer);
 	ixgbe_fcoe_ddp_pools_free(fcoe);
 }
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_fcoe.h b/drivers/net/ethernet/intel/ixgbe/ixgbe_fcoe.h
index 99de145..261fd62 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_fcoe.h
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_fcoe.h
@@ -73,6 +73,8 @@ struct ixgbe_fcoe {
 	unsigned char *extra_ddp_buffer;
 	dma_addr_t extra_ddp_buffer_dma;
 	unsigned long mode;
+	u64 __percpu *pcpu_noddp;
+	u64 __percpu *pcpu_noddp_ext_buff;
 #ifdef CONFIG_IXGBE_DCB
 	u8 up;
 #endif
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
index b95c6e9..f6fea67 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
@@ -5552,6 +5552,11 @@ void ixgbe_update_stats(struct ixgbe_adapter *adapter)
 	u64 non_eop_descs = 0, restart_queue = 0, tx_busy = 0;
 	u64 alloc_rx_page_failed = 0, alloc_rx_buff_failed = 0;
 	u64 bytes = 0, packets = 0;
+#ifdef IXGBE_FCOE
+	struct ixgbe_fcoe *fcoe = &adapter->fcoe;
+	unsigned int cpu;
+	u64 fcoe_noddp_counts_sum = 0, fcoe_noddp_ext_buff_counts_sum = 0;
+#endif /* IXGBE_FCOE */
 
 	if (test_bit(__IXGBE_DOWN, &adapter->state) ||
 	    test_bit(__IXGBE_RESETTING, &adapter->state))
@@ -5679,6 +5684,18 @@ void ixgbe_update_stats(struct ixgbe_adapter *adapter)
 		hwstats->fcoeptc += IXGBE_READ_REG(hw, IXGBE_FCOEPTC);
 		hwstats->fcoedwrc += IXGBE_READ_REG(hw, IXGBE_FCOEDWRC);
 		hwstats->fcoedwtc += IXGBE_READ_REG(hw, IXGBE_FCOEDWTC);
+		/* Add up per cpu counters for total ddp aloc fail */
+		if (fcoe->pcpu_noddp && fcoe->pcpu_noddp_ext_buff) {
+			for_each_possible_cpu(cpu) {
+				fcoe_noddp_counts_sum +=
+					*per_cpu_ptr(fcoe->pcpu_noddp, cpu);
+				fcoe_noddp_ext_buff_counts_sum +=
+					*per_cpu_ptr(fcoe->
+						pcpu_noddp_ext_buff, cpu);
+			}
+		}
+		hwstats->fcoe_noddp = fcoe_noddp_counts_sum;
+		hwstats->fcoe_noddp_ext_buff = fcoe_noddp_ext_buff_counts_sum;
 #endif /* IXGBE_FCOE */
 		break;
 	default:
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_type.h b/drivers/net/ethernet/intel/ixgbe/ixgbe_type.h
index d1d6894..6c5cca8 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_type.h
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_type.h
@@ -2682,6 +2682,8 @@ struct ixgbe_hw_stats {
 	u64 fcoeptc;
 	u64 fcoedwrc;
 	u64 fcoedwtc;
+	u64 fcoe_noddp;
+	u64 fcoe_noddp_ext_buff;
 	u64 b2ospc;
 	u64 b2ogprc;
 	u64 o2bgptc;
-- 
1.7.6.4

[net-next 03/11] ixgbe: Correct check for change in FCoE priority

[Jeff Kirsher]

From: Mark Rustad <mark.d.rustad@intel.com>

Correct a check for change in FCoE priority when IEEE mode DCB is in use.
In IEEE mode a different function has to be used to get the FCoE priority
mask. Also, the check for the mask assumed that only one priority was set.
In case there should be more than one, check just the bit.

These changes help avoid link flapping issues that can come up when IEEE
DCB is in use.

Signed-off-by: Mark Rustad <mark.d.rustad@intel.com>
Tested-by: Ross Brattain <ross.b.brattain@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/ixgbe/ixgbe_dcb_nl.c |   12 ++++++++++--
 1 files changed, 10 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_dcb_nl.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_dcb_nl.c
index be66bb6..3631d63 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_dcb_nl.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_dcb_nl.c
@@ -318,7 +318,15 @@ static u8 ixgbe_dcbnl_set_all(struct net_device *netdev)
 			      .selector = DCB_APP_IDTYPE_ETHTYPE,
 			      .protocol = ETH_P_FCOE,
 			     };
-	u8 up = dcb_getapp(netdev, &app);
+	u8 up;
+
+	/* In IEEE mode, use the IEEE Ethertype selector value */
+	if (adapter->dcbx_cap & DCB_CAP_DCBX_VER_IEEE) {
+		app.selector = IEEE_8021QAZ_APP_SEL_ETHERTYPE;
+		up = dcb_ieee_getapp_mask(netdev, &app);
+	} else {
+		up = dcb_getapp(netdev, &app);
+	}
 #endif
 
 	/* Fail command if not in CEE mode */
@@ -331,7 +339,7 @@ static u8 ixgbe_dcbnl_set_all(struct net_device *netdev)
 		return DCB_NO_HW_CHG;
 
 #ifdef IXGBE_FCOE
-	if (up && (up != (1 << adapter->fcoe.up)))
+	if (up && !(up & (1 << adapter->fcoe.up)))
 		adapter->dcb_set_bitmap |= BIT_APP_UPCHG;
 
 	/*
-- 
1.7.6.4

[net-next 04/11] igb: avoid unnecessarily creating a local copy of the q_vector

[Jeff Kirsher]

From: Alexander Duyck <alexander.h.duyck@intel.com>

This is mostly a drop of unnecessary pointer defines for q_vector when we
don't have issues with line width and don't have multiple references to
the pointer.

Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Tested-by:  Aaron Brown  <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/igb/igb_main.c |   46 ++++++++++------------------
 1 files changed, 17 insertions(+), 29 deletions(-)

diff --git a/drivers/net/ethernet/intel/igb/igb_main.c b/drivers/net/ethernet/intel/igb/igb_main.c
index 10670f9..3905a49 100644
--- a/drivers/net/ethernet/intel/igb/igb_main.c
+++ b/drivers/net/ethernet/intel/igb/igb_main.c
@@ -1317,11 +1317,9 @@ static void igb_free_irq(struct igb_adapter *adapter)
 
 		free_irq(adapter->msix_entries[vector++].vector, adapter);
 
-		for (i = 0; i < adapter->num_q_vectors; i++) {
-			struct igb_q_vector *q_vector = adapter->q_vector[i];
+		for (i = 0; i < adapter->num_q_vectors; i++)
 			free_irq(adapter->msix_entries[vector++].vector,
-			         q_vector);
-		}
+				 adapter->q_vector[i]);
 	} else {
 		free_irq(adapter->pdev->irq, adapter);
 	}
@@ -1523,10 +1521,9 @@ int igb_up(struct igb_adapter *adapter)
 
 	clear_bit(__IGB_DOWN, &adapter->state);
 
-	for (i = 0; i < adapter->num_q_vectors; i++) {
-		struct igb_q_vector *q_vector = adapter->q_vector[i];
-		napi_enable(&q_vector->napi);
-	}
+	for (i = 0; i < adapter->num_q_vectors; i++)
+		napi_enable(&(adapter->q_vector[i]->napi));
+
 	if (adapter->msix_entries)
 		igb_configure_msix(adapter);
 	else
@@ -1578,10 +1575,8 @@ void igb_down(struct igb_adapter *adapter)
 	wrfl();
 	msleep(10);
 
-	for (i = 0; i < adapter->num_q_vectors; i++) {
-		struct igb_q_vector *q_vector = adapter->q_vector[i];
-		napi_disable(&q_vector->napi);
-	}
+	for (i = 0; i < adapter->num_q_vectors; i++)
+		napi_disable(&(adapter->q_vector[i]->napi));
 
 	igb_irq_disable(adapter);
 
@@ -2546,10 +2541,8 @@ static int igb_open(struct net_device *netdev)
 	/* From here on the code is the same as igb_up() */
 	clear_bit(__IGB_DOWN, &adapter->state);
 
-	for (i = 0; i < adapter->num_q_vectors; i++) {
-		struct igb_q_vector *q_vector = adapter->q_vector[i];
-		napi_enable(&q_vector->napi);
-	}
+	for (i = 0; i < adapter->num_q_vectors; i++)
+		napi_enable(&(adapter->q_vector[i]->napi));
 
 	/* Clear any pending interrupts. */
 	rd32(E1000_ICR);
@@ -3769,10 +3762,8 @@ static void igb_watchdog_task(struct work_struct *work)
 	/* Cause software interrupt to ensure rx ring is cleaned */
 	if (adapter->msix_entries) {
 		u32 eics = 0;
-		for (i = 0; i < adapter->num_q_vectors; i++) {
-			struct igb_q_vector *q_vector = adapter->q_vector[i];
-			eics |= q_vector->eims_value;
-		}
+		for (i = 0; i < adapter->num_q_vectors; i++)
+			eics |= adapter->q_vector[i]->eims_value;
 		wr32(E1000_EICS, eics);
 	} else {
 		wr32(E1000_ICS, E1000_ICS_RXDMT0);
@@ -6671,18 +6662,15 @@ static void igb_netpoll(struct net_device *netdev)
 {
 	struct igb_adapter *adapter = netdev_priv(netdev);
 	struct e1000_hw *hw = &adapter->hw;
+	struct igb_q_vector *q_vector;
 	int i;
 
-	if (!adapter->msix_entries) {
-		struct igb_q_vector *q_vector = adapter->q_vector[0];
-		igb_irq_disable(adapter);
-		napi_schedule(&q_vector->napi);
-		return;
-	}
-
 	for (i = 0; i < adapter->num_q_vectors; i++) {
-		struct igb_q_vector *q_vector = adapter->q_vector[i];
-		wr32(E1000_EIMC, q_vector->eims_value);
+		q_vector = adapter->q_vector[i];
+		if (adapter->msix_entries)
+			wr32(E1000_EIMC, q_vector->eims_value);
+		else
+			igb_irq_disable(adapter);
 		napi_schedule(&q_vector->napi);
 	}
 }
-- 
1.7.6.4

[net-next 05/11] igb: Make certain one vector is always assigned in igb_request_irq

[Jeff Kirsher]

From: Alexander Duyck <alexander.h.duyck@intel.com>

This change makes certain that one interrupt is always initialized in
igb_request_irq.  In addition we drop the use of adapter->pdev and
instead just call pdev since we made a local copy of the pointer earlier in
the function.

Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Tested-by:  Aaron Brown  <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/igb/igb_main.c |   12 ++++++------
 1 files changed, 6 insertions(+), 6 deletions(-)

diff --git a/drivers/net/ethernet/intel/igb/igb_main.c b/drivers/net/ethernet/intel/igb/igb_main.c
index 3905a49..efc367b 100644
--- a/drivers/net/ethernet/intel/igb/igb_main.c
+++ b/drivers/net/ethernet/intel/igb/igb_main.c
@@ -1262,7 +1262,7 @@ static int igb_request_irq(struct igb_adapter *adapter)
 			goto request_done;
 		/* fall back to MSI */
 		igb_clear_interrupt_scheme(adapter);
-		if (!pci_enable_msi(adapter->pdev))
+		if (!pci_enable_msi(pdev))
 			adapter->flags |= IGB_FLAG_HAS_MSI;
 		igb_free_all_tx_resources(adapter);
 		igb_free_all_rx_resources(adapter);
@@ -1284,12 +1284,12 @@ static int igb_request_irq(struct igb_adapter *adapter)
 		}
 		igb_setup_all_tx_resources(adapter);
 		igb_setup_all_rx_resources(adapter);
-	} else {
-		igb_assign_vector(adapter->q_vector[0], 0);
 	}
 
+	igb_assign_vector(adapter->q_vector[0], 0);
+
 	if (adapter->flags & IGB_FLAG_HAS_MSI) {
-		err = request_irq(adapter->pdev->irq, igb_intr_msi, 0,
+		err = request_irq(pdev->irq, igb_intr_msi, 0,
 				  netdev->name, adapter);
 		if (!err)
 			goto request_done;
@@ -1299,11 +1299,11 @@ static int igb_request_irq(struct igb_adapter *adapter)
 		adapter->flags &= ~IGB_FLAG_HAS_MSI;
 	}
 
-	err = request_irq(adapter->pdev->irq, igb_intr, IRQF_SHARED,
+	err = request_irq(pdev->irq, igb_intr, IRQF_SHARED,
 			  netdev->name, adapter);
 
 	if (err)
-		dev_err(&adapter->pdev->dev, "Error %d getting interrupt\n",
+		dev_err(&pdev->dev, "Error %d getting interrupt\n",
 			err);
 
 request_done:
-- 
1.7.6.4

[net-next 06/11] igb: Fix features that are currently 82580 only and should also be i350

[Jeff Kirsher]

From: Alexander Duyck <alexander.h.duyck@intel.com>

This change allows support for per packet timesync and global device reset
on the i350 adapter.  These features were supported on both 82580 and i350
however it looks like several checks where not updated and as such the i350
support was not enabled.

Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Tested-by:  Aaron Brown  <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/igb/igb_main.c |   15 ++++++---------
 1 files changed, 6 insertions(+), 9 deletions(-)

diff --git a/drivers/net/ethernet/intel/igb/igb_main.c b/drivers/net/ethernet/intel/igb/igb_main.c
index efc367b..fee771b 100644
--- a/drivers/net/ethernet/intel/igb/igb_main.c
+++ b/drivers/net/ethernet/intel/igb/igb_main.c
@@ -563,7 +563,7 @@ static cycle_t igb_read_clock(const struct cyclecounter *tc)
 	 * the lowest register is SYSTIMR instead of SYSTIML.  However we never
 	 * adjusted TIMINCA so SYSTIMR will just read as all 0s so ignore it.
 	 */
-	if (hw->mac.type == e1000_82580) {
+	if (hw->mac.type >= e1000_82580) {
 		stamp = rd32(E1000_SYSTIMR) >> 8;
 		shift = IGB_82580_TSYNC_SHIFT;
 	}
@@ -1367,7 +1367,7 @@ static void igb_irq_enable(struct igb_adapter *adapter)
 	struct e1000_hw *hw = &adapter->hw;
 
 	if (adapter->msix_entries) {
-		u32 ims = E1000_IMS_LSC | E1000_IMS_DOUTSYNC;
+		u32 ims = E1000_IMS_LSC | E1000_IMS_DOUTSYNC | E1000_IMS_DRSTA;
 		u32 regval = rd32(E1000_EIAC);
 		wr32(E1000_EIAC, regval | adapter->eims_enable_mask);
 		regval = rd32(E1000_EIAM);
@@ -1377,9 +1377,6 @@ static void igb_irq_enable(struct igb_adapter *adapter)
 			wr32(E1000_MBVFIMR, 0xFF);
 			ims |= E1000_IMS_VMMB;
 		}
-		if (adapter->hw.mac.type == e1000_82580)
-			ims |= E1000_IMS_DRSTA;
-
 		wr32(E1000_IMS, ims);
 	} else {
 		wr32(E1000_IMS, IMS_ENABLE_MASK |
@@ -3112,7 +3109,7 @@ void igb_configure_rx_ring(struct igb_adapter *adapter,
 	srrctl |= (PAGE_SIZE / 2) >> E1000_SRRCTL_BSIZEPKT_SHIFT;
 #endif
 	srrctl |= E1000_SRRCTL_DESCTYPE_HDR_SPLIT_ALWAYS;
-	if (hw->mac.type == e1000_82580)
+	if (hw->mac.type >= e1000_82580)
 		srrctl |= E1000_SRRCTL_TIMESTAMP;
 	/* Only set Drop Enable if we are supporting multiple queues */
 	if (adapter->vfs_allocated_count || adapter->num_rx_queues > 1)
@@ -4463,7 +4460,7 @@ static void igb_tx_timeout(struct net_device *netdev)
 	/* Do the reset outside of interrupt context */
 	adapter->tx_timeout_count++;
 
-	if (hw->mac.type == e1000_82580)
+	if (hw->mac.type >= e1000_82580)
 		hw->dev_spec._82575.global_device_reset = true;
 
 	schedule_work(&adapter->reset_task);
@@ -5581,7 +5578,7 @@ static void igb_systim_to_hwtstamp(struct igb_adapter *adapter,
 	 * The 82580 starts with 1ns at bit 0 in RX/TXSTMPL, shift this up to
 	 * 24 to match clock shift we setup earlier.
 	 */
-	if (adapter->hw.mac.type == e1000_82580)
+	if (adapter->hw.mac.type >= e1000_82580)
 		regval <<= IGB_82580_TSYNC_SHIFT;
 
 	ns = timecounter_cyc2time(&adapter->clock, regval);
@@ -6276,7 +6273,7 @@ static int igb_hwtstamp_ioctl(struct net_device *netdev,
 	 * timestamped, so enable timestamping in all packets as
 	 * long as one rx filter was configured.
 	 */
-	if ((hw->mac.type == e1000_82580) && tsync_rx_ctl) {
+	if ((hw->mac.type >= e1000_82580) && tsync_rx_ctl) {
 		tsync_rx_ctl = E1000_TSYNCRXCTL_ENABLED;
 		tsync_rx_ctl |= E1000_TSYNCRXCTL_TYPE_ALL;
 	}
-- 
1.7.6.4

[net-next 07/11] igb: Drop unnecessary write of E1000_IMS from igb_msix_other

[Jeff Kirsher]

From: Alexander Duyck <alexander.h.duyck@intel.com>

Since we mask interrupts in EIMS not in IMS there is no need to re-enable
mask bits in that register.  As such we can remove the write to IMS from
the end of igb_msix_other.

Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Tested-by:  Aaron Brown  <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/igb/igb_main.c |    6 ------
 1 files changed, 0 insertions(+), 6 deletions(-)

diff --git a/drivers/net/ethernet/intel/igb/igb_main.c b/drivers/net/ethernet/intel/igb/igb_main.c
index fee771b..9e79306 100644
--- a/drivers/net/ethernet/intel/igb/igb_main.c
+++ b/drivers/net/ethernet/intel/igb/igb_main.c
@@ -4766,12 +4766,6 @@ static irqreturn_t igb_msix_other(int irq, void *data)
 			mod_timer(&adapter->watchdog_timer, jiffies + 1);
 	}
 
-	if (adapter->vfs_allocated_count)
-		wr32(E1000_IMS, E1000_IMS_LSC |
-				E1000_IMS_VMMB |
-				E1000_IMS_DOUTSYNC);
-	else
-		wr32(E1000_IMS, E1000_IMS_LSC | E1000_IMS_DOUTSYNC);
 	wr32(E1000_EIMS, adapter->eims_other);
 
 	return IRQ_HANDLED;
-- 
1.7.6.4

[net-next 08/11] igb: Add workaround for byte swapped VLAN on i350 local traffic

[Jeff Kirsher]

From: Alexander Duyck <alexander.h.duyck@intel.com>

On i350 when traffic is looped back from a VF to the PF the value is byte
swapped from the normal format.  In order to address this we need to add a
flag indicating that the ring will need to byte swap the loopback packets
prior to processing them.

Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Tested-by:  Aaron Brown  <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/igb/e1000_defines.h |    1 +
 drivers/net/ethernet/intel/igb/igb.h           |    1 +
 drivers/net/ethernet/intel/igb/igb_main.c      |   29 +++++++++++++++++++-----
 3 files changed, 25 insertions(+), 6 deletions(-)

diff --git a/drivers/net/ethernet/intel/igb/e1000_defines.h b/drivers/net/ethernet/intel/igb/e1000_defines.h
index 68558be..f5fc572 100644
--- a/drivers/net/ethernet/intel/igb/e1000_defines.h
+++ b/drivers/net/ethernet/intel/igb/e1000_defines.h
@@ -85,6 +85,7 @@
 #define E1000_RXD_STAT_TCPCS    0x20    /* TCP xsum calculated */
 #define E1000_RXD_STAT_TS       0x10000 /* Pkt was time stamped */
 
+#define E1000_RXDEXT_STATERR_LB    0x00040000
 #define E1000_RXDEXT_STATERR_CE    0x01000000
 #define E1000_RXDEXT_STATERR_SE    0x02000000
 #define E1000_RXDEXT_STATERR_SEQ   0x04000000
diff --git a/drivers/net/ethernet/intel/igb/igb.h b/drivers/net/ethernet/intel/igb/igb.h
index 4e665a9..4c500a7 100644
--- a/drivers/net/ethernet/intel/igb/igb.h
+++ b/drivers/net/ethernet/intel/igb/igb.h
@@ -245,6 +245,7 @@ struct igb_ring {
 
 enum e1000_ring_flags_t {
 	IGB_RING_FLAG_RX_SCTP_CSUM,
+	IGB_RING_FLAG_RX_LB_VLAN_BSWAP,
 	IGB_RING_FLAG_TX_CTX_IDX,
 	IGB_RING_FLAG_TX_DETECT_HANG
 };
diff --git a/drivers/net/ethernet/intel/igb/igb_main.c b/drivers/net/ethernet/intel/igb/igb_main.c
index 9e79306..582432f 100644
--- a/drivers/net/ethernet/intel/igb/igb_main.c
+++ b/drivers/net/ethernet/intel/igb/igb_main.c
@@ -735,6 +735,11 @@ static int igb_alloc_queues(struct igb_adapter *adapter)
 		/* set flag indicating ring supports SCTP checksum offload */
 		if (adapter->hw.mac.type >= e1000_82576)
 			set_bit(IGB_RING_FLAG_RX_SCTP_CSUM, &ring->flags);
+
+		/* On i350, loopback VLAN packets have the tag byte-swapped. */
+		if (adapter->hw.mac.type == e1000_i350)
+			set_bit(IGB_RING_FLAG_RX_LB_VLAN_BSWAP, &ring->flags);
+
 		adapter->rx_ring[i] = ring;
 	}
 	/* Restore the adapter's original node */
@@ -5864,6 +5869,23 @@ static void igb_rx_hwtstamp(struct igb_q_vector *q_vector,
 
 	igb_systim_to_hwtstamp(adapter, skb_hwtstamps(skb), regval);
 }
+
+static void igb_rx_vlan(struct igb_ring *ring,
+			union e1000_adv_rx_desc *rx_desc,
+			struct sk_buff *skb)
+{
+	if (igb_test_staterr(rx_desc, E1000_RXD_STAT_VP)) {
+		u16 vid;
+		if (igb_test_staterr(rx_desc, E1000_RXDEXT_STATERR_LB) &&
+		    test_bit(IGB_RING_FLAG_RX_LB_VLAN_BSWAP, &ring->flags))
+			vid = be16_to_cpu(rx_desc->wb.upper.vlan);
+		else
+			vid = le16_to_cpu(rx_desc->wb.upper.vlan);
+
+		__vlan_hwaccel_put_tag(skb, vid);
+	}
+}
+
 static inline u16 igb_get_hlen(union e1000_adv_rx_desc *rx_desc)
 {
 	/* HW will not DMA in data larger than the given buffer, even if it
@@ -5960,12 +5982,7 @@ static bool igb_clean_rx_irq(struct igb_q_vector *q_vector, int budget)
 		igb_rx_hwtstamp(q_vector, rx_desc, skb);
 		igb_rx_hash(rx_ring, rx_desc, skb);
 		igb_rx_checksum(rx_ring, rx_desc, skb);
-
-		if (igb_test_staterr(rx_desc, E1000_RXD_STAT_VP)) {
-			u16 vid = le16_to_cpu(rx_desc->wb.upper.vlan);
-
-			__vlan_hwaccel_put_tag(skb, vid);
-		}
+		igb_rx_vlan(rx_ring, rx_desc, skb);
 
 		total_bytes += skb->len;
 		total_packets++;
-- 
1.7.6.4

[net-next 09/11] igb: fix static function warnings reported by sparse

[Jeff Kirsher]

From: Emil Tantilov <emil.s.tantilov@intel.com>

igb_update/validate_nvm_checksum_with_offset() should be static.
Also removes unneeded prototypes for the above functions.

Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com>
Tested-by:  Aaron Brown  <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/igb/e1000_82575.c |    9 +++------
 1 files changed, 3 insertions(+), 6 deletions(-)

diff --git a/drivers/net/ethernet/intel/igb/e1000_82575.c b/drivers/net/ethernet/intel/igb/e1000_82575.c
index c0857bd..3771bd2 100644
--- a/drivers/net/ethernet/intel/igb/e1000_82575.c
+++ b/drivers/net/ethernet/intel/igb/e1000_82575.c
@@ -66,10 +66,6 @@ static s32  igb_set_pcie_completion_timeout(struct e1000_hw *hw);
 static s32  igb_reset_mdicnfg_82580(struct e1000_hw *hw);
 static s32  igb_validate_nvm_checksum_82580(struct e1000_hw *hw);
 static s32  igb_update_nvm_checksum_82580(struct e1000_hw *hw);
-static s32  igb_update_nvm_checksum_with_offset(struct e1000_hw *hw,
-						u16 offset);
-static s32 igb_validate_nvm_checksum_with_offset(struct e1000_hw *hw,
-						u16 offset);
 static s32 igb_validate_nvm_checksum_i350(struct e1000_hw *hw);
 static s32 igb_update_nvm_checksum_i350(struct e1000_hw *hw);
 static const u16 e1000_82580_rxpbs_table[] =
@@ -1820,7 +1816,8 @@ u16 igb_rxpbs_adjust_82580(u32 data)
  *  Calculates the EEPROM checksum by reading/adding each word of the EEPROM
  *  and then verifies that the sum of the EEPROM is equal to 0xBABA.
  **/
-s32 igb_validate_nvm_checksum_with_offset(struct e1000_hw *hw, u16 offset)
+static s32 igb_validate_nvm_checksum_with_offset(struct e1000_hw *hw,
+						 u16 offset)
 {
 	s32 ret_val = 0;
 	u16 checksum = 0;
@@ -1855,7 +1852,7 @@ out:
  *  up to the checksum.  Then calculates the EEPROM checksum and writes the
  *  value to the EEPROM.
  **/
-s32 igb_update_nvm_checksum_with_offset(struct e1000_hw *hw, u16 offset)
+static s32 igb_update_nvm_checksum_with_offset(struct e1000_hw *hw, u16 offset)
 {
 	s32 ret_val;
 	u16 checksum = 0;
-- 
1.7.6.4

[net-next 10/11] igb: Loopback functionality supports for i350 devices

[Jeff Kirsher]

From: "Akeem G. Abodunrin" <akeem.g.abodunrin@intel.com>

This patch adds VMDq loopback pf support for i350 devices. The patch
is necessary since the register that enabled loopback was moved and
renamed from DTXSWC to TXSWC.

Signed-off-by: "Akeem G. Abodunrin" <akeem.g.abodunrin@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/igb/e1000_82575.c |   29 ++++++++++++++++++++-----
 drivers/net/ethernet/intel/igb/e1000_regs.h  |    1 +
 2 files changed, 24 insertions(+), 6 deletions(-)

diff --git a/drivers/net/ethernet/intel/igb/e1000_82575.c b/drivers/net/ethernet/intel/igb/e1000_82575.c
index 3771bd2..6580cea 100644
--- a/drivers/net/ethernet/intel/igb/e1000_82575.c
+++ b/drivers/net/ethernet/intel/igb/e1000_82575.c
@@ -1580,14 +1580,31 @@ void igb_vmdq_set_anti_spoofing_pf(struct e1000_hw *hw, bool enable, int pf)
  **/
 void igb_vmdq_set_loopback_pf(struct e1000_hw *hw, bool enable)
 {
-	u32 dtxswc = rd32(E1000_DTXSWC);
+	u32 dtxswc;
+
+	switch (hw->mac.type) {
+	case e1000_82576:
+		dtxswc = rd32(E1000_DTXSWC);
+		if (enable)
+			dtxswc |= E1000_DTXSWC_VMDQ_LOOPBACK_EN;
+		else
+			dtxswc &= ~E1000_DTXSWC_VMDQ_LOOPBACK_EN;
+		wr32(E1000_DTXSWC, dtxswc);
+		break;
+	case e1000_i350:
+		dtxswc = rd32(E1000_TXSWC);
+		if (enable)
+			dtxswc |= E1000_DTXSWC_VMDQ_LOOPBACK_EN;
+		else
+			dtxswc &= ~E1000_DTXSWC_VMDQ_LOOPBACK_EN;
+		wr32(E1000_TXSWC, dtxswc);
+		break;
+	default:
+		/* Currently no other hardware supports loopback */
+		break;
+	}
 
-	if (enable)
-		dtxswc |= E1000_DTXSWC_VMDQ_LOOPBACK_EN;
-	else
-		dtxswc &= ~E1000_DTXSWC_VMDQ_LOOPBACK_EN;
 
-	wr32(E1000_DTXSWC, dtxswc);
 }
 
 /**
diff --git a/drivers/net/ethernet/intel/igb/e1000_regs.h b/drivers/net/ethernet/intel/igb/e1000_regs.h
index 0990f6d..0a860bc 100644
--- a/drivers/net/ethernet/intel/igb/e1000_regs.h
+++ b/drivers/net/ethernet/intel/igb/e1000_regs.h
@@ -318,6 +318,7 @@
 #define E1000_RPLOLR    0x05AF0 /* Replication Offload - RW */
 #define E1000_UTA       0x0A000 /* Unicast Table Array - RW */
 #define E1000_IOVTCL    0x05BBC /* IOV Control Register */
+#define E1000_TXSWC     0x05ACC /* Tx Switch Control */
 /* These act per VF so an array friendly macro is used */
 #define E1000_P2VMAILBOX(_n)   (0x00C00 + (4 * (_n)))
 #define E1000_VMBMEM(_n)       (0x00800 + (64 * (_n)))
-- 
1.7.6.4

[net-next 11/11] igb: Version bump.

[Jeff Kirsher]

From: Carolyn Wyborny <carolyn.wyborny@intel.com>

This change updates the driver version to 3.2.10.

Signed-off-by: Carolyn Wyborny <carolyn.wyborny@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/igb/igb_main.c |    4 ++--
 1 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/intel/igb/igb_main.c b/drivers/net/ethernet/intel/igb/igb_main.c
index 582432f..8227824 100644
--- a/drivers/net/ethernet/intel/igb/igb_main.c
+++ b/drivers/net/ethernet/intel/igb/igb_main.c
@@ -57,8 +57,8 @@
 #include "igb.h"
 
 #define MAJ 3
-#define MIN 0
-#define BUILD 6
+#define MIN 2
+#define BUILD 10
 #define DRV_VERSION __stringify(MAJ) "." __stringify(MIN) "." \
 __stringify(BUILD) "-k"
 char igb_driver_name[] = "igb";
-- 
1.7.6.4

Re: [net-next 00/11 v2][pull request] Intel Wired LAN Driver Updates

[David Miller]

From: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Date: Thu, 13 Oct 2011 00:15:01 -0700

> The following series contains updates to ixgbe and igb.  This
> version of the series contains the following changes:
> 
> - ixgbe add FCoE stats, add protection from invalid DMA and fix
>   check for change in FCoE priority
> - igb version bump, fix sparse warnings and finish up the cleanup
>   work of igb by Alex Duyck.
> 
> - v2: drop the "igb: move DMA Coalescing feature code into separate function."
>   patch while Carolyn fixes the patch based on David Miller's comments.
> 
> The following are changes since commit 9687c637388f63b87fcc18eee6e65bcfca4f49ca:
>   Merge branch 'for-davem' of git://git.infradead.org/users/linville/wireless-next
> and are available in the git repository at
>   git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net-next.git

Pulled, thanks.