[PATCH] r8169: increase the delay parameter of pm_schedule_suspend

[Hayes Wang <hayeswang@realtek.com>]

The link down would occur when reseting PHY. And it would take about 2 ~ 5 seconds
from link down to link up. If the delay of pm_schedule_suspend is not long enough,
the device would enter runtime_suspend before link up. After link up, the device
would wake up and reset PHY again. Then, you would find the driver keep in a loop
of runtime_suspend and rumtime_resume.

Signed-off-by: Hayes Wang <hayeswang@realtek.com>
---
 drivers/net/ethernet/realtek/r8169.c |    2 +-
 1 files changed, 1 insertions(+), 1 deletions(-)

diff --git a/drivers/net/ethernet/realtek/r8169.c b/drivers/net/ethernet/realtek/r8169.c
index 92b45f0..6f06aa1 100644
--- a/drivers/net/ethernet/realtek/r8169.c
+++ b/drivers/net/ethernet/realtek/r8169.c
@@ -1292,7 +1292,7 @@ static void __rtl8169_check_link_status(struct net_device *dev,
 		netif_carrier_off(dev);
 		netif_info(tp, ifdown, dev, "link down\n");
 		if (pm)
-			pm_schedule_suspend(&tp->pci_dev->dev, 100);
+			pm_schedule_suspend(&tp->pci_dev->dev, 5000);
 	}
 	spin_unlock_irqrestore(&tp->lock, flags);
 }
-- 
1.7.6.2