* [net-next 1/8] e1000e: convert to real ndo_set_rx_mode
2011-11-16 12:51 [net-next 0/8][pull request] Intel Wired LAN Driver Updates Jeff Kirsher
@ 2011-11-16 12:51 ` Jeff Kirsher
2011-11-16 12:51 ` [net-next 2/8] e1000e: Convert printks to pr_<level> Jeff Kirsher
` (7 subsequent siblings)
8 siblings, 0 replies; 12+ messages in thread
From: Jeff Kirsher @ 2011-11-16 12:51 UTC (permalink / raw)
To: davem; +Cc: Jesse Brandeburg, netdev, gospo, sassmann, Jeff Kirsher
From: Jesse Brandeburg <jesse.brandeburg@intel.com>
Commit afc4b13d (net: remove use of ndo_set_multicast_list in
drivers) changed e1000e to use the ndo_set_rx_mode entry point,
but didn't implement the unicast address programming
functionality. Implement it to achieve the ability to add unicast
addresses.
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
drivers/net/ethernet/intel/e1000e/netdev.c | 158 ++++++++++++++++++++--------
1 files changed, 114 insertions(+), 44 deletions(-)
diff --git a/drivers/net/ethernet/intel/e1000e/netdev.c b/drivers/net/ethernet/intel/e1000e/netdev.c
index a855db1..80e69d3 100644
--- a/drivers/net/ethernet/intel/e1000e/netdev.c
+++ b/drivers/net/ethernet/intel/e1000e/netdev.c
@@ -3113,79 +3113,147 @@ static void e1000_configure_rx(struct e1000_adapter *adapter)
}
/**
- * e1000_update_mc_addr_list - Update Multicast addresses
- * @hw: pointer to the HW structure
- * @mc_addr_list: array of multicast addresses to program
- * @mc_addr_count: number of multicast addresses to program
+ * e1000e_write_mc_addr_list - write multicast addresses to MTA
+ * @netdev: network interface device structure
*
- * Updates the Multicast Table Array.
- * The caller must have a packed mc_addr_list of multicast addresses.
+ * Writes multicast address list to the MTA hash table.
+ * Returns: -ENOMEM on failure
+ * 0 on no addresses written
+ * X on writing X addresses to MTA
+ */
+static int e1000e_write_mc_addr_list(struct net_device *netdev)
+{
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+ struct netdev_hw_addr *ha;
+ u8 *mta_list;
+ int i;
+
+ if (netdev_mc_empty(netdev)) {
+ /* nothing to program, so clear mc list */
+ hw->mac.ops.update_mc_addr_list(hw, NULL, 0);
+ return 0;
+ }
+
+ mta_list = kzalloc(netdev_mc_count(netdev) * ETH_ALEN, GFP_ATOMIC);
+ if (!mta_list)
+ return -ENOMEM;
+
+ /* update_mc_addr_list expects a packed array of only addresses. */
+ i = 0;
+ netdev_for_each_mc_addr(ha, netdev)
+ memcpy(mta_list + (i++ * ETH_ALEN), ha->addr, ETH_ALEN);
+
+ hw->mac.ops.update_mc_addr_list(hw, mta_list, i);
+ kfree(mta_list);
+
+ return netdev_mc_count(netdev);
+}
+
+/**
+ * e1000e_write_uc_addr_list - write unicast addresses to RAR table
+ * @netdev: network interface device structure
+ *
+ * Writes unicast address list to the RAR table.
+ * Returns: -ENOMEM on failure/insufficient address space
+ * 0 on no addresses written
+ * X on writing X addresses to the RAR table
**/
-static void e1000_update_mc_addr_list(struct e1000_hw *hw, u8 *mc_addr_list,
- u32 mc_addr_count)
+static int e1000e_write_uc_addr_list(struct net_device *netdev)
{
- hw->mac.ops.update_mc_addr_list(hw, mc_addr_list, mc_addr_count);
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+ unsigned int rar_entries = hw->mac.rar_entry_count;
+ int count = 0;
+
+ /* save a rar entry for our hardware address */
+ rar_entries--;
+
+ /* save a rar entry for the LAA workaround */
+ if (adapter->flags & FLAG_RESET_OVERWRITES_LAA)
+ rar_entries--;
+
+ /* return ENOMEM indicating insufficient memory for addresses */
+ if (netdev_uc_count(netdev) > rar_entries)
+ return -ENOMEM;
+
+ if (!netdev_uc_empty(netdev) && rar_entries) {
+ struct netdev_hw_addr *ha;
+
+ /*
+ * write the addresses in reverse order to avoid write
+ * combining
+ */
+ netdev_for_each_uc_addr(ha, netdev) {
+ if (!rar_entries)
+ break;
+ e1000e_rar_set(hw, ha->addr, rar_entries--);
+ count++;
+ }
+ }
+
+ /* zero out the remaining RAR entries not used above */
+ for (; rar_entries > 0; rar_entries--) {
+ ew32(RAH(rar_entries), 0);
+ ew32(RAL(rar_entries), 0);
+ }
+ e1e_flush();
+
+ return count;
}
/**
- * e1000_set_multi - Multicast and Promiscuous mode set
+ * e1000e_set_rx_mode - secondary unicast, Multicast and Promiscuous mode set
* @netdev: network interface device structure
*
- * The set_multi entry point is called whenever the multicast address
- * list or the network interface flags are updated. This routine is
- * responsible for configuring the hardware for proper multicast,
+ * The ndo_set_rx_mode entry point is called whenever the unicast or multicast
+ * address list or the network interface flags are updated. This routine is
+ * responsible for configuring the hardware for proper unicast, multicast,
* promiscuous mode, and all-multi behavior.
**/
-static void e1000_set_multi(struct net_device *netdev)
+static void e1000e_set_rx_mode(struct net_device *netdev)
{
struct e1000_adapter *adapter = netdev_priv(netdev);
struct e1000_hw *hw = &adapter->hw;
- struct netdev_hw_addr *ha;
- u8 *mta_list;
u32 rctl;
/* Check for Promiscuous and All Multicast modes */
-
rctl = er32(RCTL);
+ /* clear the affected bits */
+ rctl &= ~(E1000_RCTL_UPE | E1000_RCTL_MPE);
+
if (netdev->flags & IFF_PROMISC) {
rctl |= (E1000_RCTL_UPE | E1000_RCTL_MPE);
- rctl &= ~E1000_RCTL_VFE;
/* Do not hardware filter VLANs in promisc mode */
e1000e_vlan_filter_disable(adapter);
} else {
+ int count;
if (netdev->flags & IFF_ALLMULTI) {
rctl |= E1000_RCTL_MPE;
- rctl &= ~E1000_RCTL_UPE;
} else {
- rctl &= ~(E1000_RCTL_UPE | E1000_RCTL_MPE);
+ /*
+ * Write addresses to the MTA, if the attempt fails
+ * then we should just turn on promiscuous mode so
+ * that we can at least receive multicast traffic
+ */
+ count = e1000e_write_mc_addr_list(netdev);
+ if (count < 0)
+ rctl |= E1000_RCTL_MPE;
}
e1000e_vlan_filter_enable(adapter);
- }
-
- ew32(RCTL, rctl);
-
- if (!netdev_mc_empty(netdev)) {
- int i = 0;
-
- mta_list = kmalloc(netdev_mc_count(netdev) * 6, GFP_ATOMIC);
- if (!mta_list)
- return;
-
- /* prepare a packed array of only addresses. */
- netdev_for_each_mc_addr(ha, netdev)
- memcpy(mta_list + (i++ * ETH_ALEN), ha->addr, ETH_ALEN);
-
- e1000_update_mc_addr_list(hw, mta_list, i);
- kfree(mta_list);
- } else {
/*
- * if we're called from probe, we might not have
- * anything to do here, so clear out the list
+ * Write addresses to available RAR registers, if there is not
+ * sufficient space to store all the addresses then enable
+ * unicast promiscuous mode
*/
- e1000_update_mc_addr_list(hw, NULL, 0);
+ count = e1000e_write_uc_addr_list(netdev);
+ if (count < 0)
+ rctl |= E1000_RCTL_UPE;
}
+ ew32(RCTL, rctl);
+
if (netdev->features & NETIF_F_HW_VLAN_RX)
e1000e_vlan_strip_enable(adapter);
else
@@ -3198,7 +3266,7 @@ static void e1000_set_multi(struct net_device *netdev)
**/
static void e1000_configure(struct e1000_adapter *adapter)
{
- e1000_set_multi(adapter->netdev);
+ e1000e_set_rx_mode(adapter->netdev);
e1000_restore_vlan(adapter);
e1000_init_manageability_pt(adapter);
@@ -5331,7 +5399,7 @@ static int __e1000_shutdown(struct pci_dev *pdev, bool *enable_wake,
if (wufc) {
e1000_setup_rctl(adapter);
- e1000_set_multi(netdev);
+ e1000e_set_rx_mode(netdev);
/* turn on all-multi mode if wake on multicast is enabled */
if (wufc & E1000_WUFC_MC) {
@@ -5884,7 +5952,7 @@ static const struct net_device_ops e1000e_netdev_ops = {
.ndo_stop = e1000_close,
.ndo_start_xmit = e1000_xmit_frame,
.ndo_get_stats64 = e1000e_get_stats64,
- .ndo_set_rx_mode = e1000_set_multi,
+ .ndo_set_rx_mode = e1000e_set_rx_mode,
.ndo_set_mac_address = e1000_set_mac,
.ndo_change_mtu = e1000_change_mtu,
.ndo_do_ioctl = e1000_ioctl,
@@ -6076,6 +6144,8 @@ static int __devinit e1000_probe(struct pci_dev *pdev,
NETIF_F_TSO6 |
NETIF_F_HW_CSUM);
+ netdev->priv_flags |= IFF_UNICAST_FLT;
+
if (pci_using_dac) {
netdev->features |= NETIF_F_HIGHDMA;
netdev->vlan_features |= NETIF_F_HIGHDMA;
--
1.7.6.4
^ permalink raw reply related [flat|nested] 12+ messages in thread* [net-next 2/8] e1000e: Convert printks to pr_<level>
2011-11-16 12:51 [net-next 0/8][pull request] Intel Wired LAN Driver Updates Jeff Kirsher
2011-11-16 12:51 ` [net-next 1/8] e1000e: convert to real ndo_set_rx_mode Jeff Kirsher
@ 2011-11-16 12:51 ` Jeff Kirsher
2011-11-16 12:51 ` [net-next 3/8] ixgbe: fix LED blink logic to check for link Jeff Kirsher
` (6 subsequent siblings)
8 siblings, 0 replies; 12+ messages in thread
From: Jeff Kirsher @ 2011-11-16 12:51 UTC (permalink / raw)
To: davem; +Cc: Jeff Kirsher, netdev, gospo, sassmann, Joe Perches
Based on the original patch from Joe Perches.
Use the current logging styles.
pr_<level> conversions are now prefixed with "e1000e:"
Correct a couple of defects where the trailing NTU may have
been printed on a separate line because of an interleaving
hex_dump.
Remove unnecessary uses of KERN_CONT and use single pr_info()s
to avoid any possible output interleaving from other modules.
Coalesce formats as appropriate.
Remove an extra space from a broken across lines
coalescing of "Link Status " and " Change".
-v2 Remove changes to Copyright string
CC: Joe Perches <joe@perches.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
---
drivers/net/ethernet/intel/e1000e/netdev.c | 230 ++++++++++++----------------
1 files changed, 101 insertions(+), 129 deletions(-)
diff --git a/drivers/net/ethernet/intel/e1000e/netdev.c b/drivers/net/ethernet/intel/e1000e/netdev.c
index 80e69d3..05344d6 100644
--- a/drivers/net/ethernet/intel/e1000e/netdev.c
+++ b/drivers/net/ethernet/intel/e1000e/netdev.c
@@ -163,16 +163,13 @@ static void e1000_regdump(struct e1000_hw *hw, struct e1000_reg_info *reginfo)
regs[n] = __er32(hw, E1000_TARC(n));
break;
default:
- printk(KERN_INFO "%-15s %08x\n",
- reginfo->name, __er32(hw, reginfo->ofs));
+ pr_info("%-15s %08x\n",
+ reginfo->name, __er32(hw, reginfo->ofs));
return;
}
snprintf(rname, 16, "%s%s", reginfo->name, "[0-1]");
- printk(KERN_INFO "%-15s ", rname);
- for (n = 0; n < 2; n++)
- printk(KERN_CONT "%08x ", regs[n]);
- printk(KERN_CONT "\n");
+ pr_info("%-15s %08x %08x\n", rname, regs[0], regs[1]);
}
/*
@@ -208,16 +205,15 @@ static void e1000e_dump(struct e1000_adapter *adapter)
/* Print netdevice Info */
if (netdev) {
dev_info(&adapter->pdev->dev, "Net device Info\n");
- printk(KERN_INFO "Device Name state "
- "trans_start last_rx\n");
- printk(KERN_INFO "%-15s %016lX %016lX %016lX\n",
- netdev->name, netdev->state, netdev->trans_start,
- netdev->last_rx);
+ pr_info("Device Name state trans_start last_rx\n");
+ pr_info("%-15s %016lX %016lX %016lX\n",
+ netdev->name, netdev->state, netdev->trans_start,
+ netdev->last_rx);
}
/* Print Registers */
dev_info(&adapter->pdev->dev, "Register Dump\n");
- printk(KERN_INFO " Register Name Value\n");
+ pr_info(" Register Name Value\n");
for (reginfo = (struct e1000_reg_info *)e1000_reg_info_tbl;
reginfo->name; reginfo++) {
e1000_regdump(hw, reginfo);
@@ -228,15 +224,14 @@ static void e1000e_dump(struct e1000_adapter *adapter)
goto exit;
dev_info(&adapter->pdev->dev, "Tx Ring Summary\n");
- printk(KERN_INFO "Queue [NTU] [NTC] [bi(ntc)->dma ]"
- " leng ntw timestamp\n");
+ pr_info("Queue [NTU] [NTC] [bi(ntc)->dma ] leng ntw timestamp\n");
buffer_info = &tx_ring->buffer_info[tx_ring->next_to_clean];
- printk(KERN_INFO " %5d %5X %5X %016llX %04X %3X %016llX\n",
- 0, tx_ring->next_to_use, tx_ring->next_to_clean,
- (unsigned long long)buffer_info->dma,
- buffer_info->length,
- buffer_info->next_to_watch,
- (unsigned long long)buffer_info->time_stamp);
+ pr_info(" %5d %5X %5X %016llX %04X %3X %016llX\n",
+ 0, tx_ring->next_to_use, tx_ring->next_to_clean,
+ (unsigned long long)buffer_info->dma,
+ buffer_info->length,
+ buffer_info->next_to_watch,
+ (unsigned long long)buffer_info->time_stamp);
/* Print Tx Ring */
if (!netif_msg_tx_done(adapter))
@@ -271,37 +266,32 @@ static void e1000e_dump(struct e1000_adapter *adapter)
* +----------------------------------------------------------------+
* 63 48 47 40 39 36 35 32 31 24 23 20 19 0
*/
- printk(KERN_INFO "Tl[desc] [address 63:0 ] [SpeCssSCmCsLen]"
- " [bi->dma ] leng ntw timestamp bi->skb "
- "<-- Legacy format\n");
- printk(KERN_INFO "Tc[desc] [Ce CoCsIpceCoS] [MssHlRSCm0Plen]"
- " [bi->dma ] leng ntw timestamp bi->skb "
- "<-- Ext Context format\n");
- printk(KERN_INFO "Td[desc] [address 63:0 ] [VlaPoRSCm1Dlen]"
- " [bi->dma ] leng ntw timestamp bi->skb "
- "<-- Ext Data format\n");
+ pr_info("Tl[desc] [address 63:0 ] [SpeCssSCmCsLen] [bi->dma ] leng ntw timestamp bi->skb <-- Legacy format\n");
+ pr_info("Tc[desc] [Ce CoCsIpceCoS] [MssHlRSCm0Plen] [bi->dma ] leng ntw timestamp bi->skb <-- Ext Context format\n");
+ pr_info("Td[desc] [address 63:0 ] [VlaPoRSCm1Dlen] [bi->dma ] leng ntw timestamp bi->skb <-- Ext Data format\n");
for (i = 0; tx_ring->desc && (i < tx_ring->count); i++) {
+ const char *next_desc;
tx_desc = E1000_TX_DESC(*tx_ring, i);
buffer_info = &tx_ring->buffer_info[i];
u0 = (struct my_u0 *)tx_desc;
- printk(KERN_INFO "T%c[0x%03X] %016llX %016llX %016llX "
- "%04X %3X %016llX %p",
- (!(le64_to_cpu(u0->b) & (1 << 29)) ? 'l' :
- ((le64_to_cpu(u0->b) & (1 << 20)) ? 'd' : 'c')), i,
- (unsigned long long)le64_to_cpu(u0->a),
- (unsigned long long)le64_to_cpu(u0->b),
- (unsigned long long)buffer_info->dma,
- buffer_info->length, buffer_info->next_to_watch,
- (unsigned long long)buffer_info->time_stamp,
- buffer_info->skb);
if (i == tx_ring->next_to_use && i == tx_ring->next_to_clean)
- printk(KERN_CONT " NTC/U\n");
+ next_desc = " NTC/U";
else if (i == tx_ring->next_to_use)
- printk(KERN_CONT " NTU\n");
+ next_desc = " NTU";
else if (i == tx_ring->next_to_clean)
- printk(KERN_CONT " NTC\n");
+ next_desc = " NTC";
else
- printk(KERN_CONT "\n");
+ next_desc = "";
+ pr_info("T%c[0x%03X] %016llX %016llX %016llX %04X %3X %016llX %p%s\n",
+ (!(le64_to_cpu(u0->b) & (1 << 29)) ? 'l' :
+ ((le64_to_cpu(u0->b) & (1 << 20)) ? 'd' : 'c')),
+ i,
+ (unsigned long long)le64_to_cpu(u0->a),
+ (unsigned long long)le64_to_cpu(u0->b),
+ (unsigned long long)buffer_info->dma,
+ buffer_info->length, buffer_info->next_to_watch,
+ (unsigned long long)buffer_info->time_stamp,
+ buffer_info->skb, next_desc);
if (netif_msg_pktdata(adapter) && buffer_info->dma != 0)
print_hex_dump(KERN_INFO, "", DUMP_PREFIX_ADDRESS,
@@ -312,9 +302,9 @@ static void e1000e_dump(struct e1000_adapter *adapter)
/* Print Rx Ring Summary */
rx_ring_summary:
dev_info(&adapter->pdev->dev, "Rx Ring Summary\n");
- printk(KERN_INFO "Queue [NTU] [NTC]\n");
- printk(KERN_INFO " %5d %5X %5X\n", 0,
- rx_ring->next_to_use, rx_ring->next_to_clean);
+ pr_info("Queue [NTU] [NTC]\n");
+ pr_info(" %5d %5X %5X\n",
+ 0, rx_ring->next_to_use, rx_ring->next_to_clean);
/* Print Rx Ring */
if (!netif_msg_rx_status(adapter))
@@ -337,10 +327,7 @@ rx_ring_summary:
* 24 | Buffer Address 3 [63:0] |
* +-----------------------------------------------------+
*/
- printk(KERN_INFO "R [desc] [buffer 0 63:0 ] "
- "[buffer 1 63:0 ] "
- "[buffer 2 63:0 ] [buffer 3 63:0 ] [bi->dma ] "
- "[bi->skb] <-- Ext Pkt Split format\n");
+ pr_info("R [desc] [buffer 0 63:0 ] [buffer 1 63:0 ] [buffer 2 63:0 ] [buffer 3 63:0 ] [bi->dma ] [bi->skb] <-- Ext Pkt Split format\n");
/* [Extended] Receive Descriptor (Write-Back) Format
*
* 63 48 47 32 31 13 12 8 7 4 3 0
@@ -352,35 +339,40 @@ rx_ring_summary:
* +------------------------------------------------------+
* 63 48 47 32 31 20 19 0
*/
- printk(KERN_INFO "RWB[desc] [ck ipid mrqhsh] "
- "[vl l0 ee es] "
- "[ l3 l2 l1 hs] [reserved ] ---------------- "
- "[bi->skb] <-- Ext Rx Write-Back format\n");
+ pr_info("RWB[desc] [ck ipid mrqhsh] [vl l0 ee es] [ l3 l2 l1 hs] [reserved ] ---------------- [bi->skb] <-- Ext Rx Write-Back format\n");
for (i = 0; i < rx_ring->count; i++) {
+ const char *next_desc;
buffer_info = &rx_ring->buffer_info[i];
rx_desc_ps = E1000_RX_DESC_PS(*rx_ring, i);
u1 = (struct my_u1 *)rx_desc_ps;
staterr =
le32_to_cpu(rx_desc_ps->wb.middle.status_error);
+
+ if (i == rx_ring->next_to_use)
+ next_desc = " NTU";
+ else if (i == rx_ring->next_to_clean)
+ next_desc = " NTC";
+ else
+ next_desc = "";
+
if (staterr & E1000_RXD_STAT_DD) {
/* Descriptor Done */
- printk(KERN_INFO "RWB[0x%03X] %016llX "
- "%016llX %016llX %016llX "
- "---------------- %p", i,
- (unsigned long long)le64_to_cpu(u1->a),
- (unsigned long long)le64_to_cpu(u1->b),
- (unsigned long long)le64_to_cpu(u1->c),
- (unsigned long long)le64_to_cpu(u1->d),
- buffer_info->skb);
+ pr_info("%s[0x%03X] %016llX %016llX %016llX %016llX ---------------- %p%s\n",
+ "RWB", i,
+ (unsigned long long)le64_to_cpu(u1->a),
+ (unsigned long long)le64_to_cpu(u1->b),
+ (unsigned long long)le64_to_cpu(u1->c),
+ (unsigned long long)le64_to_cpu(u1->d),
+ buffer_info->skb, next_desc);
} else {
- printk(KERN_INFO "R [0x%03X] %016llX "
- "%016llX %016llX %016llX %016llX %p", i,
- (unsigned long long)le64_to_cpu(u1->a),
- (unsigned long long)le64_to_cpu(u1->b),
- (unsigned long long)le64_to_cpu(u1->c),
- (unsigned long long)le64_to_cpu(u1->d),
- (unsigned long long)buffer_info->dma,
- buffer_info->skb);
+ pr_info("%s[0x%03X] %016llX %016llX %016llX %016llX %016llX %p%s\n",
+ "R ", i,
+ (unsigned long long)le64_to_cpu(u1->a),
+ (unsigned long long)le64_to_cpu(u1->b),
+ (unsigned long long)le64_to_cpu(u1->c),
+ (unsigned long long)le64_to_cpu(u1->d),
+ (unsigned long long)buffer_info->dma,
+ buffer_info->skb, next_desc);
if (netif_msg_pktdata(adapter))
print_hex_dump(KERN_INFO, "",
@@ -388,13 +380,6 @@ rx_ring_summary:
phys_to_virt(buffer_info->dma),
adapter->rx_ps_bsize0, true);
}
-
- if (i == rx_ring->next_to_use)
- printk(KERN_CONT " NTU\n");
- else if (i == rx_ring->next_to_clean)
- printk(KERN_CONT " NTC\n");
- else
- printk(KERN_CONT "\n");
}
break;
default:
@@ -407,9 +392,7 @@ rx_ring_summary:
* 8 | Reserved |
* +-----------------------------------------------------+
*/
- printk(KERN_INFO "R [desc] [buf addr 63:0 ] "
- "[reserved 63:0 ] [bi->dma ] "
- "[bi->skb] <-- Ext (Read) format\n");
+ pr_info("R [desc] [buf addr 63:0 ] [reserved 63:0 ] [bi->dma ] [bi->skb] <-- Ext (Read) format\n");
/* Extended Receive Descriptor (Write-Back) Format
*
* 63 48 47 32 31 24 23 4 3 0
@@ -423,29 +406,37 @@ rx_ring_summary:
* +------------------------------------------------------+
* 63 48 47 32 31 20 19 0
*/
- printk(KERN_INFO "RWB[desc] [cs ipid mrq] "
- "[vt ln xe xs] "
- "[bi->skb] <-- Ext (Write-Back) format\n");
+ pr_info("RWB[desc] [cs ipid mrq] [vt ln xe xs] [bi->skb] <-- Ext (Write-Back) format\n");
for (i = 0; i < rx_ring->count; i++) {
+ const char *next_desc;
+
buffer_info = &rx_ring->buffer_info[i];
rx_desc = E1000_RX_DESC_EXT(*rx_ring, i);
u1 = (struct my_u1 *)rx_desc;
staterr = le32_to_cpu(rx_desc->wb.upper.status_error);
+
+ if (i == rx_ring->next_to_use)
+ next_desc = " NTU";
+ else if (i == rx_ring->next_to_clean)
+ next_desc = " NTC";
+ else
+ next_desc = "";
+
if (staterr & E1000_RXD_STAT_DD) {
/* Descriptor Done */
- printk(KERN_INFO "RWB[0x%03X] %016llX "
- "%016llX ---------------- %p", i,
- (unsigned long long)le64_to_cpu(u1->a),
- (unsigned long long)le64_to_cpu(u1->b),
- buffer_info->skb);
+ pr_info("%s[0x%03X] %016llX %016llX ---------------- %p%s\n",
+ "RWB", i,
+ (unsigned long long)le64_to_cpu(u1->a),
+ (unsigned long long)le64_to_cpu(u1->b),
+ buffer_info->skb, next_desc);
} else {
- printk(KERN_INFO "R [0x%03X] %016llX "
- "%016llX %016llX %p", i,
- (unsigned long long)le64_to_cpu(u1->a),
- (unsigned long long)le64_to_cpu(u1->b),
- (unsigned long long)buffer_info->dma,
- buffer_info->skb);
+ pr_info("%s[0x%03X] %016llX %016llX %016llX %p%s\n",
+ "R ", i,
+ (unsigned long long)le64_to_cpu(u1->a),
+ (unsigned long long)le64_to_cpu(u1->b),
+ (unsigned long long)buffer_info->dma,
+ buffer_info->skb, next_desc);
if (netif_msg_pktdata(adapter))
print_hex_dump(KERN_INFO, "",
@@ -456,13 +447,6 @@ rx_ring_summary:
adapter->rx_buffer_len,
true);
}
-
- if (i == rx_ring->next_to_use)
- printk(KERN_CONT " NTU\n");
- else if (i == rx_ring->next_to_clean)
- printk(KERN_CONT " NTC\n");
- else
- printk(KERN_CONT "\n");
}
}
@@ -1222,8 +1206,7 @@ static bool e1000_clean_rx_irq_ps(struct e1000_adapter *adapter,
adapter->flags2 |= FLAG2_IS_DISCARDING;
if (adapter->flags2 & FLAG2_IS_DISCARDING) {
- e_dbg("Packet Split buffers didn't pick up the full "
- "packet\n");
+ e_dbg("Packet Split buffers didn't pick up the full packet\n");
dev_kfree_skb_irq(skb);
if (staterr & E1000_RXD_STAT_EOP)
adapter->flags2 &= ~FLAG2_IS_DISCARDING;
@@ -1238,8 +1221,7 @@ static bool e1000_clean_rx_irq_ps(struct e1000_adapter *adapter,
length = le16_to_cpu(rx_desc->wb.middle.length0);
if (!length) {
- e_dbg("Last part of the packet spanning multiple "
- "descriptors\n");
+ e_dbg("Last part of the packet spanning multiple descriptors\n");
dev_kfree_skb_irq(skb);
goto next_desc;
}
@@ -1917,8 +1899,7 @@ void e1000e_set_interrupt_capability(struct e1000_adapter *adapter)
return;
}
/* MSI-X failed, so fall through and try MSI */
- e_err("Failed to initialize MSI-X interrupts. "
- "Falling back to MSI interrupts.\n");
+ e_err("Failed to initialize MSI-X interrupts. Falling back to MSI interrupts.\n");
e1000e_reset_interrupt_capability(adapter);
}
adapter->int_mode = E1000E_INT_MODE_MSI;
@@ -1928,8 +1909,7 @@ void e1000e_set_interrupt_capability(struct e1000_adapter *adapter)
adapter->flags |= FLAG_MSI_ENABLED;
} else {
adapter->int_mode = E1000E_INT_MODE_LEGACY;
- e_err("Failed to initialize MSI interrupts. Falling "
- "back to legacy interrupts.\n");
+ e_err("Failed to initialize MSI interrupts. Falling back to legacy interrupts.\n");
}
/* Fall through */
case E1000E_INT_MODE_LEGACY:
@@ -4236,16 +4216,13 @@ static void e1000_print_link_info(struct e1000_adapter *adapter)
u32 ctrl = er32(CTRL);
/* Link status message must follow this format for user tools */
- printk(KERN_INFO "e1000e: %s NIC Link is Up %d Mbps %s, "
- "Flow Control: %s\n",
- adapter->netdev->name,
- adapter->link_speed,
- (adapter->link_duplex == FULL_DUPLEX) ?
- "Full Duplex" : "Half Duplex",
- ((ctrl & E1000_CTRL_TFCE) && (ctrl & E1000_CTRL_RFCE)) ?
- "Rx/Tx" :
- ((ctrl & E1000_CTRL_RFCE) ? "Rx" :
- ((ctrl & E1000_CTRL_TFCE) ? "Tx" : "None")));
+ printk(KERN_INFO "e1000e: %s NIC Link is Up %d Mbps %s Duplex, Flow Control: %s\n",
+ adapter->netdev->name,
+ adapter->link_speed,
+ adapter->link_duplex == FULL_DUPLEX ? "Full" : "Half",
+ (ctrl & E1000_CTRL_TFCE) && (ctrl & E1000_CTRL_RFCE) ? "Rx/Tx" :
+ (ctrl & E1000_CTRL_RFCE) ? "Rx" :
+ (ctrl & E1000_CTRL_TFCE) ? "Tx" : "None");
}
static bool e1000e_has_link(struct e1000_adapter *adapter)
@@ -4391,10 +4368,7 @@ static void e1000_watchdog_task(struct work_struct *work)
e1e_rphy(hw, PHY_AUTONEG_EXP, &autoneg_exp);
if (!(autoneg_exp & NWAY_ER_LP_NWAY_CAPS))
- e_info("Autonegotiated half duplex but"
- " link partner cannot autoneg. "
- " Try forcing full duplex if "
- "link gets many collisions.\n");
+ e_info("Autonegotiated half duplex but link partner cannot autoneg. Try forcing full duplex if link gets many collisions.\n");
}
/* adjust timeout factor according to speed/duplex */
@@ -5178,8 +5152,7 @@ static int e1000_change_mtu(struct net_device *netdev, int new_mtu)
if ((adapter->hw.mac.type == e1000_pch2lan) &&
!(adapter->flags2 & FLAG2_CRC_STRIPPING) &&
(new_mtu > ETH_DATA_LEN)) {
- e_err("Jumbo Frames not supported on 82579 when CRC "
- "stripping is disabled.\n");
+ e_err("Jumbo Frames not supported on 82579 when CRC stripping is disabled.\n");
return -EINVAL;
}
@@ -5595,8 +5568,8 @@ static int __e1000_resume(struct pci_dev *pdev)
phy_data & E1000_WUS_MC ? "Multicast Packet" :
phy_data & E1000_WUS_BC ? "Broadcast Packet" :
phy_data & E1000_WUS_MAG ? "Magic Packet" :
- phy_data & E1000_WUS_LNKC ? "Link Status "
- " Change" : "other");
+ phy_data & E1000_WUS_LNKC ?
+ "Link Status Change" : "other");
}
e1e_wphy(&adapter->hw, BM_WUS, ~0);
} else {
@@ -6017,8 +5990,7 @@ static int __devinit e1000_probe(struct pci_dev *pdev,
err = dma_set_coherent_mask(&pdev->dev,
DMA_BIT_MASK(32));
if (err) {
- dev_err(&pdev->dev, "No usable DMA "
- "configuration, aborting\n");
+ dev_err(&pdev->dev, "No usable DMA configuration, aborting\n");
goto err_dma;
}
}
--
1.7.6.4
^ permalink raw reply related [flat|nested] 12+ messages in thread* [net-next 3/8] ixgbe: fix LED blink logic to check for link
2011-11-16 12:51 [net-next 0/8][pull request] Intel Wired LAN Driver Updates Jeff Kirsher
2011-11-16 12:51 ` [net-next 1/8] e1000e: convert to real ndo_set_rx_mode Jeff Kirsher
2011-11-16 12:51 ` [net-next 2/8] e1000e: Convert printks to pr_<level> Jeff Kirsher
@ 2011-11-16 12:51 ` Jeff Kirsher
2011-11-16 12:51 ` [net-next 4/8] igbvf: Convert printks to pr_<level> Jeff Kirsher
` (5 subsequent siblings)
8 siblings, 0 replies; 12+ messages in thread
From: Jeff Kirsher @ 2011-11-16 12:51 UTC (permalink / raw)
To: davem; +Cc: Emil Tantilov, netdev, gospo, sassmann, Jeff Kirsher
From: Emil Tantilov <emil.s.tantilov@intel.com>
Previously the driver would force link without checking whether the link was
already established. This caused some inconsistencies in the LED blink rate.
Do not force link if link is already up.
Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com>
Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
drivers/net/ethernet/intel/ixgbe/ixgbe_x540.c | 18 +++++++++++-------
1 files changed, 11 insertions(+), 7 deletions(-)
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_x540.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_x540.c
index e5101e9..8cc5ecc 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_x540.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_x540.c
@@ -751,16 +751,20 @@ static s32 ixgbe_blink_led_start_X540(struct ixgbe_hw *hw, u32 index)
{
u32 macc_reg;
u32 ledctl_reg;
+ ixgbe_link_speed speed;
+ bool link_up;
/*
- * In order for the blink bit in the LED control register
- * to work, link and speed must be forced in the MAC. We
- * will reverse this when we stop the blinking.
+ * Link should be up in order for the blink bit in the LED control
+ * register to work. Force link and speed in the MAC if link is down.
+ * This will be reversed when we stop the blinking.
*/
- macc_reg = IXGBE_READ_REG(hw, IXGBE_MACC);
- macc_reg |= IXGBE_MACC_FLU | IXGBE_MACC_FSV_10G | IXGBE_MACC_FS;
- IXGBE_WRITE_REG(hw, IXGBE_MACC, macc_reg);
-
+ hw->mac.ops.check_link(hw, &speed, &link_up, false);
+ if (link_up == false) {
+ macc_reg = IXGBE_READ_REG(hw, IXGBE_MACC);
+ macc_reg |= IXGBE_MACC_FLU | IXGBE_MACC_FSV_10G | IXGBE_MACC_FS;
+ IXGBE_WRITE_REG(hw, IXGBE_MACC, macc_reg);
+ }
/* Set the LED to LINK_UP + BLINK. */
ledctl_reg = IXGBE_READ_REG(hw, IXGBE_LEDCTL);
ledctl_reg &= ~IXGBE_LED_MODE_MASK(index);
--
1.7.6.4
^ permalink raw reply related [flat|nested] 12+ messages in thread* [net-next 4/8] igbvf: Convert printks to pr_<level>
2011-11-16 12:51 [net-next 0/8][pull request] Intel Wired LAN Driver Updates Jeff Kirsher
` (2 preceding siblings ...)
2011-11-16 12:51 ` [net-next 3/8] ixgbe: fix LED blink logic to check for link Jeff Kirsher
@ 2011-11-16 12:51 ` Jeff Kirsher
2011-11-16 12:51 ` [net-next 5/8] ixgbevf: " Jeff Kirsher
` (4 subsequent siblings)
8 siblings, 0 replies; 12+ messages in thread
From: Jeff Kirsher @ 2011-11-16 12:51 UTC (permalink / raw)
To: davem; +Cc: Jeff Kirsher, netdev, gospo, sassmann, Joe Perches
Based on the previous patch from Joe Perches <joe@perches.com>
Use current logging styles.
Prefix all output via #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
Neaten link status dev_info.
-v2 Remove Copyright changes and fix-up patch to make it checkpatch.pl
compliant.
CC: Joe Perches <joe@perches.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Tested-by: Sibai Li <sibai.li@intel.com>
---
drivers/net/ethernet/intel/igbvf/netdev.c | 14 +++++++-------
1 files changed, 7 insertions(+), 7 deletions(-)
diff --git a/drivers/net/ethernet/intel/igbvf/netdev.c b/drivers/net/ethernet/intel/igbvf/netdev.c
index cca7812..d076a8d 100644
--- a/drivers/net/ethernet/intel/igbvf/netdev.c
+++ b/drivers/net/ethernet/intel/igbvf/netdev.c
@@ -25,6 +25,8 @@
*******************************************************************************/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/module.h>
#include <linux/types.h>
#include <linux/init.h>
@@ -1746,10 +1748,9 @@ void igbvf_update_stats(struct igbvf_adapter *adapter)
static void igbvf_print_link_info(struct igbvf_adapter *adapter)
{
- dev_info(&adapter->pdev->dev, "Link is Up %d Mbps %s\n",
- adapter->link_speed,
- ((adapter->link_duplex == FULL_DUPLEX) ?
- "Full Duplex" : "Half Duplex"));
+ dev_info(&adapter->pdev->dev, "Link is Up %d Mbps %s Duplex\n",
+ adapter->link_speed,
+ adapter->link_duplex == FULL_DUPLEX ? "Full" : "Half");
}
static bool igbvf_has_link(struct igbvf_adapter *adapter)
@@ -2842,9 +2843,8 @@ static struct pci_driver igbvf_driver = {
static int __init igbvf_init_module(void)
{
int ret;
- printk(KERN_INFO "%s - version %s\n",
- igbvf_driver_string, igbvf_driver_version);
- printk(KERN_INFO "%s\n", igbvf_copyright);
+ pr_info("%s - version %s\n", igbvf_driver_string, igbvf_driver_version);
+ pr_info("%s\n", igbvf_copyright);
ret = pci_register_driver(&igbvf_driver);
--
1.7.6.4
^ permalink raw reply related [flat|nested] 12+ messages in thread* [net-next 5/8] ixgbevf: Convert printks to pr_<level>
2011-11-16 12:51 [net-next 0/8][pull request] Intel Wired LAN Driver Updates Jeff Kirsher
` (3 preceding siblings ...)
2011-11-16 12:51 ` [net-next 4/8] igbvf: Convert printks to pr_<level> Jeff Kirsher
@ 2011-11-16 12:51 ` Jeff Kirsher
2011-11-16 12:51 ` [net-next 6/8] igb: " Jeff Kirsher
` (3 subsequent siblings)
8 siblings, 0 replies; 12+ messages in thread
From: Jeff Kirsher @ 2011-11-16 12:51 UTC (permalink / raw)
To: davem; +Cc: Jeff Kirsher, netdev, gospo, sassmann, Joe Perches
Based on the original patch from Joe Perches <joe@perches.com>
Use the current logging styles, prefix output with "ixgbevf: "
Add #define pr_fmt
Coalesce formats.
-v2 Fix-up to make checkpatch.pl compliant and remove change to
copyright line
CC: Joe Perches <joe@perches.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Tested-by: Sibai Li <sibai.li@intel.com>
---
drivers/net/ethernet/intel/ixgbevf/ethtool.c | 6 +++-
drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c | 27 +++++++++++----------
2 files changed, 18 insertions(+), 15 deletions(-)
diff --git a/drivers/net/ethernet/intel/ixgbevf/ethtool.c b/drivers/net/ethernet/intel/ixgbevf/ethtool.c
index e29ba45..149fa52 100644
--- a/drivers/net/ethernet/intel/ixgbevf/ethtool.c
+++ b/drivers/net/ethernet/intel/ixgbevf/ethtool.c
@@ -27,6 +27,8 @@
/* ethtool support for ixgbevf */
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/types.h>
#include <linux/module.h>
#include <linux/slab.h>
@@ -549,8 +551,8 @@ static const u32 register_test_patterns[] = {
writel((W & M), (adapter->hw.hw_addr + R)); \
val = readl(adapter->hw.hw_addr + R); \
if ((W & M) != (val & M)) { \
- printk(KERN_ERR "set/check reg %04X test failed: got 0x%08X " \
- "expected 0x%08X\n", R, (val & M), (W & M)); \
+ pr_err("set/check reg %04X test failed: got 0x%08X expected " \
+ "0x%08X\n", R, (val & M), (W & M)); \
*data = R; \
writel(before, (adapter->hw.hw_addr + R)); \
return 1; \
diff --git a/drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c b/drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c
index 4c8e199..b2ece53 100644
--- a/drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c
+++ b/drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c
@@ -29,6 +29,9 @@
/******************************************************************************
Copyright (c)2006 - 2007 Myricom, Inc. for some LRO specific code
******************************************************************************/
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/types.h>
#include <linux/bitops.h>
#include <linux/module.h>
@@ -1437,7 +1440,7 @@ static int ixgbevf_write_uc_addr_list(struct net_device *netdev)
int count = 0;
if ((netdev_uc_count(netdev)) > 10) {
- printk(KERN_ERR "Too many unicast filters - No Space\n");
+ pr_err("Too many unicast filters - No Space\n");
return -ENOSPC;
}
@@ -2135,7 +2138,7 @@ static int ixgbevf_init_interrupt_scheme(struct ixgbevf_adapter *adapter)
err = ixgbevf_alloc_queues(adapter);
if (err) {
- printk(KERN_ERR "Unable to allocate memory for queues\n");
+ pr_err("Unable to allocate memory for queues\n");
goto err_alloc_queues;
}
@@ -2189,7 +2192,7 @@ static int __devinit ixgbevf_sw_init(struct ixgbevf_adapter *adapter)
} else {
err = hw->mac.ops.init_hw(hw);
if (err) {
- printk(KERN_ERR "init_shared_code failed: %d\n", err);
+ pr_err("init_shared_code failed: %d\n", err);
goto out;
}
}
@@ -2630,8 +2633,8 @@ static int ixgbevf_open(struct net_device *netdev)
* the vf can't start. */
if (hw->adapter_stopped) {
err = IXGBE_ERR_MBX;
- printk(KERN_ERR "Unable to start - perhaps the PF"
- " Driver isn't up yet\n");
+ pr_err("Unable to start - perhaps the PF Driver isn't "
+ "up yet\n");
goto err_setup_reset;
}
}
@@ -2842,10 +2845,8 @@ static bool ixgbevf_tx_csum(struct ixgbevf_adapter *adapter,
break;
default:
if (unlikely(net_ratelimit())) {
- printk(KERN_WARNING
- "partial checksum but "
- "proto=%x!\n",
- skb->protocol);
+ pr_warn("partial checksum but "
+ "proto=%x!\n", skb->protocol);
}
break;
}
@@ -3414,7 +3415,7 @@ static int __devinit ixgbevf_probe(struct pci_dev *pdev,
memcpy(netdev->perm_addr, adapter->hw.mac.addr, netdev->addr_len);
if (!is_valid_ether_addr(netdev->dev_addr)) {
- printk(KERN_ERR "invalid MAC address\n");
+ pr_err("invalid MAC address\n");
err = -EIO;
goto err_sw_init;
}
@@ -3535,10 +3536,10 @@ static struct pci_driver ixgbevf_driver = {
static int __init ixgbevf_init_module(void)
{
int ret;
- printk(KERN_INFO "ixgbevf: %s - version %s\n", ixgbevf_driver_string,
- ixgbevf_driver_version);
+ pr_info("%s - version %s\n", ixgbevf_driver_string,
+ ixgbevf_driver_version);
- printk(KERN_INFO "%s\n", ixgbevf_copyright);
+ pr_info("%s\n", ixgbevf_copyright);
ret = pci_register_driver(&ixgbevf_driver);
return ret;
--
1.7.6.4
^ permalink raw reply related [flat|nested] 12+ messages in thread* [net-next 6/8] igb: Convert printks to pr_<level>
2011-11-16 12:51 [net-next 0/8][pull request] Intel Wired LAN Driver Updates Jeff Kirsher
` (4 preceding siblings ...)
2011-11-16 12:51 ` [net-next 5/8] ixgbevf: " Jeff Kirsher
@ 2011-11-16 12:51 ` Jeff Kirsher
2011-11-16 12:51 ` [net-next 7/8] igb: Convert bare printk to pr_notice Jeff Kirsher
` (2 subsequent siblings)
8 siblings, 0 replies; 12+ messages in thread
From: Jeff Kirsher @ 2011-11-16 12:51 UTC (permalink / raw)
To: davem; +Cc: Jeff Kirsher, netdev, gospo, sassmann, Joe Perches
Based on original patch from Joe Perches <joe@perches.com>
Use the current logging styles.
pr_<level> conversions are now prefixed with "igb: "
Correct a defect where the trailing NTU may have been printed
on a separate line because of an interleaving hex_dump.
Remove unnecessary uses of KERN_CONT and use single pr_info()s
to avoid any possible output interleaving from other modules.
Coalesce formats as appropriate.
-v2 fix-up to make checkpatch.pl compliant and remove change to
the copyright line
CC: Joe Perches <joe@perches.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
---
drivers/net/ethernet/intel/igb/igb_main.c | 165 ++++++++++++++---------------
1 files changed, 80 insertions(+), 85 deletions(-)
diff --git a/drivers/net/ethernet/intel/igb/igb_main.c b/drivers/net/ethernet/intel/igb/igb_main.c
index ced5444..c92b796 100644
--- a/drivers/net/ethernet/intel/igb/igb_main.c
+++ b/drivers/net/ethernet/intel/igb/igb_main.c
@@ -25,6 +25,8 @@
*******************************************************************************/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/module.h>
#include <linux/types.h>
#include <linux/init.h>
@@ -325,16 +327,13 @@ static void igb_regdump(struct e1000_hw *hw, struct igb_reg_info *reginfo)
regs[n] = rd32(E1000_TXDCTL(n));
break;
default:
- printk(KERN_INFO "%-15s %08x\n",
- reginfo->name, rd32(reginfo->ofs));
+ pr_info("%-15s %08x\n", reginfo->name, rd32(reginfo->ofs));
return;
}
snprintf(rname, 16, "%s%s", reginfo->name, "[0-3]");
- printk(KERN_INFO "%-15s ", rname);
- for (n = 0; n < 4; n++)
- printk(KERN_CONT "%08x ", regs[n]);
- printk(KERN_CONT "\n");
+ pr_info("%-15s %08x %08x %08x %08x\n", rname, regs[0], regs[1],
+ regs[2], regs[3]);
}
/*
@@ -359,18 +358,15 @@ static void igb_dump(struct igb_adapter *adapter)
/* Print netdevice Info */
if (netdev) {
dev_info(&adapter->pdev->dev, "Net device Info\n");
- printk(KERN_INFO "Device Name state "
- "trans_start last_rx\n");
- printk(KERN_INFO "%-15s %016lX %016lX %016lX\n",
- netdev->name,
- netdev->state,
- netdev->trans_start,
- netdev->last_rx);
+ pr_info("Device Name state trans_start "
+ "last_rx\n");
+ pr_info("%-15s %016lX %016lX %016lX\n", netdev->name,
+ netdev->state, netdev->trans_start, netdev->last_rx);
}
/* Print Registers */
dev_info(&adapter->pdev->dev, "Register Dump\n");
- printk(KERN_INFO " Register Name Value\n");
+ pr_info(" Register Name Value\n");
for (reginfo = (struct igb_reg_info *)igb_reg_info_tbl;
reginfo->name; reginfo++) {
igb_regdump(hw, reginfo);
@@ -381,18 +377,17 @@ static void igb_dump(struct igb_adapter *adapter)
goto exit;
dev_info(&adapter->pdev->dev, "TX Rings Summary\n");
- printk(KERN_INFO "Queue [NTU] [NTC] [bi(ntc)->dma ]"
- " leng ntw timestamp\n");
+ pr_info("Queue [NTU] [NTC] [bi(ntc)->dma ] leng ntw timestamp\n");
for (n = 0; n < adapter->num_tx_queues; n++) {
struct igb_tx_buffer *buffer_info;
tx_ring = adapter->tx_ring[n];
buffer_info = &tx_ring->tx_buffer_info[tx_ring->next_to_clean];
- printk(KERN_INFO " %5d %5X %5X %016llX %04X %p %016llX\n",
- n, tx_ring->next_to_use, tx_ring->next_to_clean,
- (u64)buffer_info->dma,
- buffer_info->length,
- buffer_info->next_to_watch,
- (u64)buffer_info->time_stamp);
+ pr_info(" %5d %5X %5X %016llX %04X %p %016llX\n",
+ n, tx_ring->next_to_use, tx_ring->next_to_clean,
+ (u64)buffer_info->dma,
+ buffer_info->length,
+ buffer_info->next_to_watch,
+ (u64)buffer_info->time_stamp);
}
/* Print TX Rings */
@@ -414,36 +409,38 @@ static void igb_dump(struct igb_adapter *adapter)
for (n = 0; n < adapter->num_tx_queues; n++) {
tx_ring = adapter->tx_ring[n];
- printk(KERN_INFO "------------------------------------\n");
- printk(KERN_INFO "TX QUEUE INDEX = %d\n", tx_ring->queue_index);
- printk(KERN_INFO "------------------------------------\n");
- printk(KERN_INFO "T [desc] [address 63:0 ] "
- "[PlPOCIStDDM Ln] [bi->dma ] "
- "leng ntw timestamp bi->skb\n");
+ pr_info("------------------------------------\n");
+ pr_info("TX QUEUE INDEX = %d\n", tx_ring->queue_index);
+ pr_info("------------------------------------\n");
+ pr_info("T [desc] [address 63:0 ] [PlPOCIStDDM Ln] "
+ "[bi->dma ] leng ntw timestamp "
+ "bi->skb\n");
for (i = 0; tx_ring->desc && (i < tx_ring->count); i++) {
+ const char *next_desc;
struct igb_tx_buffer *buffer_info;
tx_desc = IGB_TX_DESC(tx_ring, i);
buffer_info = &tx_ring->tx_buffer_info[i];
u0 = (struct my_u0 *)tx_desc;
- printk(KERN_INFO "T [0x%03X] %016llX %016llX %016llX"
- " %04X %p %016llX %p", i,
+ if (i == tx_ring->next_to_use &&
+ i == tx_ring->next_to_clean)
+ next_desc = " NTC/U";
+ else if (i == tx_ring->next_to_use)
+ next_desc = " NTU";
+ else if (i == tx_ring->next_to_clean)
+ next_desc = " NTC";
+ else
+ next_desc = "";
+
+ pr_info("T [0x%03X] %016llX %016llX %016llX"
+ " %04X %p %016llX %p%s\n", i,
le64_to_cpu(u0->a),
le64_to_cpu(u0->b),
(u64)buffer_info->dma,
buffer_info->length,
buffer_info->next_to_watch,
(u64)buffer_info->time_stamp,
- buffer_info->skb);
- if (i == tx_ring->next_to_use &&
- i == tx_ring->next_to_clean)
- printk(KERN_CONT " NTC/U\n");
- else if (i == tx_ring->next_to_use)
- printk(KERN_CONT " NTU\n");
- else if (i == tx_ring->next_to_clean)
- printk(KERN_CONT " NTC\n");
- else
- printk(KERN_CONT "\n");
+ buffer_info->skb, next_desc);
if (netif_msg_pktdata(adapter) && buffer_info->dma != 0)
print_hex_dump(KERN_INFO, "",
@@ -456,11 +453,11 @@ static void igb_dump(struct igb_adapter *adapter)
/* Print RX Rings Summary */
rx_ring_summary:
dev_info(&adapter->pdev->dev, "RX Rings Summary\n");
- printk(KERN_INFO "Queue [NTU] [NTC]\n");
+ pr_info("Queue [NTU] [NTC]\n");
for (n = 0; n < adapter->num_rx_queues; n++) {
rx_ring = adapter->rx_ring[n];
- printk(KERN_INFO " %5d %5X %5X\n", n,
- rx_ring->next_to_use, rx_ring->next_to_clean);
+ pr_info(" %5d %5X %5X\n",
+ n, rx_ring->next_to_use, rx_ring->next_to_clean);
}
/* Print RX Rings */
@@ -492,36 +489,43 @@ rx_ring_summary:
for (n = 0; n < adapter->num_rx_queues; n++) {
rx_ring = adapter->rx_ring[n];
- printk(KERN_INFO "------------------------------------\n");
- printk(KERN_INFO "RX QUEUE INDEX = %d\n", rx_ring->queue_index);
- printk(KERN_INFO "------------------------------------\n");
- printk(KERN_INFO "R [desc] [ PktBuf A0] "
- "[ HeadBuf DD] [bi->dma ] [bi->skb] "
- "<-- Adv Rx Read format\n");
- printk(KERN_INFO "RWB[desc] [PcsmIpSHl PtRs] "
- "[vl er S cks ln] ---------------- [bi->skb] "
- "<-- Adv Rx Write-Back format\n");
+ pr_info("------------------------------------\n");
+ pr_info("RX QUEUE INDEX = %d\n", rx_ring->queue_index);
+ pr_info("------------------------------------\n");
+ pr_info("R [desc] [ PktBuf A0] [ HeadBuf DD] "
+ "[bi->dma ] [bi->skb] <-- Adv Rx Read format\n");
+ pr_info("RWB[desc] [PcsmIpSHl PtRs] [vl er S cks ln] -----"
+ "----------- [bi->skb] <-- Adv Rx Write-Back format\n");
for (i = 0; i < rx_ring->count; i++) {
+ const char *next_desc;
struct igb_rx_buffer *buffer_info;
buffer_info = &rx_ring->rx_buffer_info[i];
rx_desc = IGB_RX_DESC(rx_ring, i);
u0 = (struct my_u0 *)rx_desc;
staterr = le32_to_cpu(rx_desc->wb.upper.status_error);
+
+ if (i == rx_ring->next_to_use)
+ next_desc = " NTU";
+ else if (i == rx_ring->next_to_clean)
+ next_desc = " NTC";
+ else
+ next_desc = "";
+
if (staterr & E1000_RXD_STAT_DD) {
/* Descriptor Done */
- printk(KERN_INFO "RWB[0x%03X] %016llX "
- "%016llX ---------------- %p", i,
+ pr_info("%s[0x%03X] %016llX %016llX -------"
+ "--------- %p%s\n", "RWB", i,
le64_to_cpu(u0->a),
le64_to_cpu(u0->b),
- buffer_info->skb);
+ buffer_info->skb, next_desc);
} else {
- printk(KERN_INFO "R [0x%03X] %016llX "
- "%016llX %016llX %p", i,
+ pr_info("%s[0x%03X] %016llX %016llX %016llX"
+ " %p%s\n", "R ", i,
le64_to_cpu(u0->a),
le64_to_cpu(u0->b),
(u64)buffer_info->dma,
- buffer_info->skb);
+ buffer_info->skb, next_desc);
if (netif_msg_pktdata(adapter)) {
print_hex_dump(KERN_INFO, "",
@@ -538,14 +542,6 @@ rx_ring_summary:
PAGE_SIZE/2, true);
}
}
-
- if (i == rx_ring->next_to_use)
- printk(KERN_CONT " NTU\n");
- else if (i == rx_ring->next_to_clean)
- printk(KERN_CONT " NTC\n");
- else
- printk(KERN_CONT "\n");
-
}
}
@@ -599,10 +595,10 @@ struct net_device *igb_get_hw_dev(struct e1000_hw *hw)
static int __init igb_init_module(void)
{
int ret;
- printk(KERN_INFO "%s - version %s\n",
+ pr_info("%s - version %s\n",
igb_driver_string, igb_driver_version);
- printk(KERN_INFO "%s\n", igb_copyright);
+ pr_info("%s\n", igb_copyright);
#ifdef CONFIG_IGB_DCA
dca_register_notify(&dca_notifier);
@@ -3640,23 +3636,23 @@ static void igb_watchdog_task(struct work_struct *work)
ctrl = rd32(E1000_CTRL);
/* Links status message must follow this format */
- printk(KERN_INFO "igb: %s NIC Link is Up %d Mbps %s, "
- "Flow Control: %s\n",
+ printk(KERN_INFO "igb: %s NIC Link is Up %d Mbps %s "
+ "Duplex, Flow Control: %s\n",
netdev->name,
adapter->link_speed,
adapter->link_duplex == FULL_DUPLEX ?
- "Full Duplex" : "Half Duplex",
- ((ctrl & E1000_CTRL_TFCE) &&
- (ctrl & E1000_CTRL_RFCE)) ? "RX/TX" :
- ((ctrl & E1000_CTRL_RFCE) ? "RX" :
- ((ctrl & E1000_CTRL_TFCE) ? "TX" : "None")));
+ "Full" : "Half",
+ (ctrl & E1000_CTRL_TFCE) &&
+ (ctrl & E1000_CTRL_RFCE) ? "RX/TX" :
+ (ctrl & E1000_CTRL_RFCE) ? "RX" :
+ (ctrl & E1000_CTRL_TFCE) ? "TX" : "None");
/* check for thermal sensor event */
- if (igb_thermal_sensor_event(hw, E1000_THSTAT_LINK_THROTTLE)) {
- printk(KERN_INFO "igb: %s The network adapter "
- "link speed was downshifted "
- "because it overheated.\n",
- netdev->name);
+ if (igb_thermal_sensor_event(hw,
+ E1000_THSTAT_LINK_THROTTLE)) {
+ netdev_info(netdev, "The network adapter link "
+ "speed was downshifted because it "
+ "overheated\n");
}
/* adjust timeout factor according to speed/duplex */
@@ -3686,11 +3682,10 @@ static void igb_watchdog_task(struct work_struct *work)
adapter->link_duplex = 0;
/* check for thermal sensor event */
- if (igb_thermal_sensor_event(hw, E1000_THSTAT_PWR_DOWN)) {
- printk(KERN_ERR "igb: %s The network adapter "
- "was stopped because it "
- "overheated.\n",
- netdev->name);
+ if (igb_thermal_sensor_event(hw,
+ E1000_THSTAT_PWR_DOWN)) {
+ netdev_err(netdev, "The network adapter was "
+ "stopped because it overheated\n");
}
/* Links status message must follow this format */
--
1.7.6.4
^ permalink raw reply related [flat|nested] 12+ messages in thread* [net-next 7/8] igb: Convert bare printk to pr_notice
2011-11-16 12:51 [net-next 0/8][pull request] Intel Wired LAN Driver Updates Jeff Kirsher
` (5 preceding siblings ...)
2011-11-16 12:51 ` [net-next 6/8] igb: " Jeff Kirsher
@ 2011-11-16 12:51 ` Jeff Kirsher
2011-11-16 12:51 ` [net-next 8/8] intel: Convert <FOO>_LENGTH_OF_ADDRESS to ETH_ALEN Jeff Kirsher
2011-11-16 23:12 ` [net-next 0/8][pull request] Intel Wired LAN Driver Updates David Miller
8 siblings, 0 replies; 12+ messages in thread
From: Jeff Kirsher @ 2011-11-16 12:51 UTC (permalink / raw)
To: davem; +Cc: Joe Perches, netdev, gospo, sassmann, Jeff Kirsher
From: Joe Perches <joe@perches.com>
printks should use KERN_ levels.
Signed-off-by: Joe Perches <joe@perches.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
drivers/net/ethernet/intel/igb/e1000_82575.c | 5 +++--
1 files changed, 3 insertions(+), 2 deletions(-)
diff --git a/drivers/net/ethernet/intel/igb/e1000_82575.c b/drivers/net/ethernet/intel/igb/e1000_82575.c
index 7881fb9..b8e20f0 100644
--- a/drivers/net/ethernet/intel/igb/e1000_82575.c
+++ b/drivers/net/ethernet/intel/igb/e1000_82575.c
@@ -29,6 +29,8 @@
* e1000_82576
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/types.h>
#include <linux/if_ether.h>
@@ -244,8 +246,7 @@ static s32 igb_get_invariants_82575(struct e1000_hw *hw)
* Check for invalid size
*/
if ((hw->mac.type == e1000_82576) && (size > 15)) {
- printk("igb: The NVM size is not valid, "
- "defaulting to 32K.\n");
+ pr_notice("The NVM size is not valid, defaulting to 32K\n");
size = 15;
}
nvm->word_size = 1 << size;
--
1.7.6.4
^ permalink raw reply related [flat|nested] 12+ messages in thread* [net-next 8/8] intel: Convert <FOO>_LENGTH_OF_ADDRESS to ETH_ALEN
2011-11-16 12:51 [net-next 0/8][pull request] Intel Wired LAN Driver Updates Jeff Kirsher
` (6 preceding siblings ...)
2011-11-16 12:51 ` [net-next 7/8] igb: Convert bare printk to pr_notice Jeff Kirsher
@ 2011-11-16 12:51 ` Jeff Kirsher
2011-11-16 23:12 ` [net-next 0/8][pull request] Intel Wired LAN Driver Updates David Miller
8 siblings, 0 replies; 12+ messages in thread
From: Jeff Kirsher @ 2011-11-16 12:51 UTC (permalink / raw)
To: davem; +Cc: Joe Perches, netdev, gospo, sassmann, Jeff Kirsher
From: Joe Perches <joe@perches.com>
Use the normal #defines not module specific ones.
Signed-off-by: Joe Perches <joe@perches.com>
Tested-by: Stephen Ko <stephen.s.ko@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
drivers/net/ethernet/intel/e1000/e1000_hw.h | 1 -
drivers/net/ethernet/intel/ixgbe/ixgbe_sriov.c | 2 +-
drivers/net/ethernet/intel/ixgbe/ixgbe_type.h | 8 +++-----
drivers/net/ethernet/intel/ixgbevf/defines.h | 1 -
drivers/net/ethernet/intel/ixgbevf/vf.c | 4 ++--
5 files changed, 6 insertions(+), 10 deletions(-)
diff --git a/drivers/net/ethernet/intel/e1000/e1000_hw.h b/drivers/net/ethernet/intel/e1000/e1000_hw.h
index 5c9a840..cf7e3c0 100644
--- a/drivers/net/ethernet/intel/e1000/e1000_hw.h
+++ b/drivers/net/ethernet/intel/e1000/e1000_hw.h
@@ -448,7 +448,6 @@ void e1000_io_write(struct e1000_hw *hw, unsigned long port, u32 value);
#define E1000_DEV_ID_INTEL_CE4100_GBE 0x2E6E
#define NODE_ADDRESS_SIZE 6
-#define ETH_LENGTH_OF_ADDRESS 6
/* MAC decode size is 128K - This is the size of BAR0 */
#define MAC_DECODE_SIZE (128 * 1024)
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_sriov.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_sriov.c
index 00fcd39..cf6812d 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_sriov.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_sriov.c
@@ -572,7 +572,7 @@ static int ixgbe_rcv_msg_from_vf(struct ixgbe_adapter *adapter, u32 vf)
/* reply to reset with ack and vf mac address */
msgbuf[0] = IXGBE_VF_RESET | IXGBE_VT_MSGTYPE_ACK;
- memcpy(new_mac, vf_mac, IXGBE_ETH_LENGTH_OF_ADDRESS);
+ memcpy(new_mac, vf_mac, ETH_ALEN);
/*
* Piggyback the multicast filter type so VF can compute the
* correct vectors
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_type.h b/drivers/net/ethernet/intel/ixgbe/ixgbe_type.h
index 6c5cca8..242643a 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_type.h
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_type.h
@@ -1710,8 +1710,6 @@ enum {
#define IXGBE_NVM_POLL_WRITE 1 /* Flag for polling for write complete */
#define IXGBE_NVM_POLL_READ 0 /* Flag for polling for read complete */
-#define IXGBE_ETH_LENGTH_OF_ADDRESS 6
-
#define IXGBE_EEPROM_PAGE_SIZE_MAX 128
#define IXGBE_EEPROM_RD_BUFFER_MAX_COUNT 512 /* EEPROM words # read in burst */
#define IXGBE_EEPROM_WR_BUFFER_MAX_COUNT 256 /* EEPROM words # wr in burst */
@@ -2802,9 +2800,9 @@ struct ixgbe_eeprom_info {
struct ixgbe_mac_info {
struct ixgbe_mac_operations ops;
enum ixgbe_mac_type type;
- u8 addr[IXGBE_ETH_LENGTH_OF_ADDRESS];
- u8 perm_addr[IXGBE_ETH_LENGTH_OF_ADDRESS];
- u8 san_addr[IXGBE_ETH_LENGTH_OF_ADDRESS];
+ u8 addr[ETH_ALEN];
+ u8 perm_addr[ETH_ALEN];
+ u8 san_addr[ETH_ALEN];
/* prefix for World Wide Node Name (WWNN) */
u16 wwnn_prefix;
/* prefix for World Wide Port Name (WWPN) */
diff --git a/drivers/net/ethernet/intel/ixgbevf/defines.h b/drivers/net/ethernet/intel/ixgbevf/defines.h
index 78abb6f..2eb89cb 100644
--- a/drivers/net/ethernet/intel/ixgbevf/defines.h
+++ b/drivers/net/ethernet/intel/ixgbevf/defines.h
@@ -35,7 +35,6 @@
#define IXGBE_VF_IRQ_CLEAR_MASK 7
#define IXGBE_VF_MAX_TX_QUEUES 1
#define IXGBE_VF_MAX_RX_QUEUES 1
-#define IXGBE_ETH_LENGTH_OF_ADDRESS 6
/* Link speed */
typedef u32 ixgbe_link_speed;
diff --git a/drivers/net/ethernet/intel/ixgbevf/vf.c b/drivers/net/ethernet/intel/ixgbevf/vf.c
index aa3682e..21533e3 100644
--- a/drivers/net/ethernet/intel/ixgbevf/vf.c
+++ b/drivers/net/ethernet/intel/ixgbevf/vf.c
@@ -108,7 +108,7 @@ static s32 ixgbevf_reset_hw_vf(struct ixgbe_hw *hw)
if (msgbuf[0] != (IXGBE_VF_RESET | IXGBE_VT_MSGTYPE_ACK))
return IXGBE_ERR_INVALID_MAC_ADDR;
- memcpy(hw->mac.perm_addr, addr, IXGBE_ETH_LENGTH_OF_ADDRESS);
+ memcpy(hw->mac.perm_addr, addr, ETH_ALEN);
hw->mac.mc_filter_type = msgbuf[IXGBE_VF_MC_TYPE_WORD];
return 0;
@@ -211,7 +211,7 @@ static s32 ixgbevf_mta_vector(struct ixgbe_hw *hw, u8 *mc_addr)
**/
static s32 ixgbevf_get_mac_addr_vf(struct ixgbe_hw *hw, u8 *mac_addr)
{
- memcpy(mac_addr, hw->mac.perm_addr, IXGBE_ETH_LENGTH_OF_ADDRESS);
+ memcpy(mac_addr, hw->mac.perm_addr, ETH_ALEN);
return 0;
}
--
1.7.6.4
^ permalink raw reply related [flat|nested] 12+ messages in thread* Re: [net-next 0/8][pull request] Intel Wired LAN Driver Updates
2011-11-16 12:51 [net-next 0/8][pull request] Intel Wired LAN Driver Updates Jeff Kirsher
` (7 preceding siblings ...)
2011-11-16 12:51 ` [net-next 8/8] intel: Convert <FOO>_LENGTH_OF_ADDRESS to ETH_ALEN Jeff Kirsher
@ 2011-11-16 23:12 ` David Miller
2011-11-16 23:21 ` Jeff Kirsher
8 siblings, 1 reply; 12+ messages in thread
From: David Miller @ 2011-11-16 23:12 UTC (permalink / raw)
To: jeffrey.t.kirsher; +Cc: netdev, gospo, sassmann
From: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Date: Wed, 16 Nov 2011 04:51:24 -0800
> The following are changes since commit 229a66e3bec97563aa92e25dfe0bc60b0d468619:
> IPv6: Removing unnecessary NULL checks.
> and are available in the git repository at:
> git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/next-organize master
This tree doesn't exist.
^ permalink raw reply [flat|nested] 12+ messages in thread* Re: [net-next 0/8][pull request] Intel Wired LAN Driver Updates
2011-11-16 23:12 ` [net-next 0/8][pull request] Intel Wired LAN Driver Updates David Miller
@ 2011-11-16 23:21 ` Jeff Kirsher
2011-11-16 23:32 ` David Miller
0 siblings, 1 reply; 12+ messages in thread
From: Jeff Kirsher @ 2011-11-16 23:21 UTC (permalink / raw)
To: David Miller
Cc: netdev@vger.kernel.org, gospo@redhat.com, sassmann@redhat.com
[-- Attachment #1: Type: text/plain, Size: 566 bytes --]
On Wed, 2011-11-16 at 15:12 -0800, David Miller wrote:
> From: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
> Date: Wed, 16 Nov 2011 04:51:24 -0800
>
> > The following are changes since commit 229a66e3bec97563aa92e25dfe0bc60b0d468619:
> > IPv6: Removing unnecessary NULL checks.
> > and are available in the git repository at:
> > git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/next-organize master
>
> This tree doesn't exist.
That was supposed to be
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net-next master
sorry Dave.
[-- Attachment #2: This is a digitally signed message part --]
[-- Type: application/pgp-signature, Size: 836 bytes --]
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [net-next 0/8][pull request] Intel Wired LAN Driver Updates
2011-11-16 23:21 ` Jeff Kirsher
@ 2011-11-16 23:32 ` David Miller
0 siblings, 0 replies; 12+ messages in thread
From: David Miller @ 2011-11-16 23:32 UTC (permalink / raw)
To: jeffrey.t.kirsher; +Cc: netdev, gospo, sassmann
From: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Date: Wed, 16 Nov 2011 15:21:22 -0800
> On Wed, 2011-11-16 at 15:12 -0800, David Miller wrote:
>> From: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
>> Date: Wed, 16 Nov 2011 04:51:24 -0800
>>
>> > The following are changes since commit 229a66e3bec97563aa92e25dfe0bc60b0d468619:
>> > IPv6: Removing unnecessary NULL checks.
>> > and are available in the git repository at:
>> > git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/next-organize master
>>
>> This tree doesn't exist.
>
> That was supposed to be
>
> git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net-next master
That works better, pulled, thanks!
^ permalink raw reply [flat|nested] 12+ messages in thread