From: Ben Hutchings <ben@decadent.org.uk>
To: David Miller <davem@davemloft.net>
Cc: Lennert Buytenhek <buytenh@wantstofly.org>, netdev@vger.kernel.org
Subject: [PATCH net-next 3/3] dsa: Move switch drivers to new directory drivers/net/dsa
Date: Mon, 28 Nov 2011 03:08:33 +0000 [thread overview]
Message-ID: <1322449713.7454.36.camel@deadeye> (raw)
In-Reply-To: <1322449506.7454.34.camel@deadeye>
Support for specific hardware belongs under drivers/net/ not net/.
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
This seems to work, but again it's compile-tested only.
Ben.
drivers/net/Kconfig | 2 +
drivers/net/Makefile | 1 +
drivers/net/dsa/Kconfig | 36 ++++++++++++++++++++++++++++
drivers/net/dsa/Makefile | 9 +++++++
{net => drivers/net}/dsa/mv88e6060.c | 0
{net => drivers/net}/dsa/mv88e6123_61_65.c | 0
{net => drivers/net}/dsa/mv88e6131.c | 0
{net => drivers/net}/dsa/mv88e6xxx.c | 0
{net => drivers/net}/dsa/mv88e6xxx.h | 0
net/dsa/Kconfig | 36 +---------------------------
net/dsa/Makefile | 11 --------
11 files changed, 49 insertions(+), 46 deletions(-)
create mode 100644 drivers/net/dsa/Kconfig
create mode 100644 drivers/net/dsa/Makefile
rename {net => drivers/net}/dsa/mv88e6060.c (100%)
rename {net => drivers/net}/dsa/mv88e6123_61_65.c (100%)
rename {net => drivers/net}/dsa/mv88e6131.c (100%)
rename {net => drivers/net}/dsa/mv88e6xxx.c (100%)
rename {net => drivers/net}/dsa/mv88e6xxx.h (100%)
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index debdf1c..9845afb 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -243,6 +243,8 @@ source "drivers/atm/Kconfig"
source "drivers/net/caif/Kconfig"
+source "drivers/net/dsa/Kconfig"
+
source "drivers/net/ethernet/Kconfig"
source "drivers/net/fddi/Kconfig"
diff --git a/drivers/net/Makefile b/drivers/net/Makefile
index 4e4ebfe..1988881 100644
--- a/drivers/net/Makefile
+++ b/drivers/net/Makefile
@@ -30,6 +30,7 @@ obj-$(CONFIG_DEV_APPLETALK) += appletalk/
obj-$(CONFIG_CAIF) += caif/
obj-$(CONFIG_CAN) += can/
obj-$(CONFIG_ETRAX_ETHERNET) += cris/
+obj-$(CONFIG_NET_DSA) += dsa/
obj-$(CONFIG_ETHERNET) += ethernet/
obj-$(CONFIG_FDDI) += fddi/
obj-$(CONFIG_HIPPI) += hippi/
diff --git a/drivers/net/dsa/Kconfig b/drivers/net/dsa/Kconfig
new file mode 100644
index 0000000..dd151d5
--- /dev/null
+++ b/drivers/net/dsa/Kconfig
@@ -0,0 +1,36 @@
+menu "Distributed Switch Architecture drivers"
+ depends on NET_DSA
+
+config NET_DSA_MV88E6XXX
+ tristate
+ default n
+
+config NET_DSA_MV88E6060
+ tristate "Marvell 88E6060 ethernet switch chip support"
+ select NET_DSA_TAG_TRAILER
+ ---help---
+ This enables support for the Marvell 88E6060 ethernet switch
+ chip.
+
+config NET_DSA_MV88E6XXX_NEED_PPU
+ bool
+ default n
+
+config NET_DSA_MV88E6131
+ tristate "Marvell 88E6085/6095/6095F/6131 ethernet switch chip support"
+ select NET_DSA_MV88E6XXX
+ select NET_DSA_MV88E6XXX_NEED_PPU
+ select NET_DSA_TAG_DSA
+ ---help---
+ This enables support for the Marvell 88E6085/6095/6095F/6131
+ ethernet switch chips.
+
+config NET_DSA_MV88E6123_61_65
+ tristate "Marvell 88E6123/6161/6165 ethernet switch chip support"
+ select NET_DSA_MV88E6XXX
+ select NET_DSA_TAG_EDSA
+ ---help---
+ This enables support for the Marvell 88E6123/6161/6165
+ ethernet switch chips.
+
+endmenu
diff --git a/drivers/net/dsa/Makefile b/drivers/net/dsa/Makefile
new file mode 100644
index 0000000..f3bda05
--- /dev/null
+++ b/drivers/net/dsa/Makefile
@@ -0,0 +1,9 @@
+obj-$(CONFIG_NET_DSA_MV88E6060) += mv88e6060.o
+obj-$(CONFIG_NET_DSA_MV88E6XXX) += mv88e6xxx_drv.o
+mv88e6xxx_drv-y += mv88e6xxx.o
+ifdef CONFIG_NET_DSA_MV88E6123_61_65
+mv88e6xxx_drv-y += mv88e6123_61_65.o
+endif
+ifdef CONFIG_NET_DSA_MV88E6131
+mv88e6xxx_drv-y += mv88e6131.o
+endif
diff --git a/net/dsa/mv88e6060.c b/drivers/net/dsa/mv88e6060.c
similarity index 100%
rename from net/dsa/mv88e6060.c
rename to drivers/net/dsa/mv88e6060.c
diff --git a/net/dsa/mv88e6123_61_65.c b/drivers/net/dsa/mv88e6123_61_65.c
similarity index 100%
rename from net/dsa/mv88e6123_61_65.c
rename to drivers/net/dsa/mv88e6123_61_65.c
diff --git a/net/dsa/mv88e6131.c b/drivers/net/dsa/mv88e6131.c
similarity index 100%
rename from net/dsa/mv88e6131.c
rename to drivers/net/dsa/mv88e6131.c
diff --git a/net/dsa/mv88e6xxx.c b/drivers/net/dsa/mv88e6xxx.c
similarity index 100%
rename from net/dsa/mv88e6xxx.c
rename to drivers/net/dsa/mv88e6xxx.c
diff --git a/net/dsa/mv88e6xxx.h b/drivers/net/dsa/mv88e6xxx.h
similarity index 100%
rename from net/dsa/mv88e6xxx.h
rename to drivers/net/dsa/mv88e6xxx.h
diff --git a/net/dsa/Kconfig b/net/dsa/Kconfig
index 7e12303..274791c 100644
--- a/net/dsa/Kconfig
+++ b/net/dsa/Kconfig
@@ -1,4 +1,4 @@
-menuconfig NET_DSA
+config NET_DSA
tristate "Distributed Switch Architecture support"
default n
depends on EXPERIMENTAL && NETDEVICES && !S390
@@ -23,38 +23,4 @@ config NET_DSA_TAG_TRAILER
bool
default n
-
-# switch drivers
-config NET_DSA_MV88E6XXX
- tristate
- default n
-
-config NET_DSA_MV88E6060
- tristate "Marvell 88E6060 ethernet switch chip support"
- select NET_DSA_TAG_TRAILER
- ---help---
- This enables support for the Marvell 88E6060 ethernet switch
- chip.
-
-config NET_DSA_MV88E6XXX_NEED_PPU
- bool
- default n
-
-config NET_DSA_MV88E6131
- tristate "Marvell 88E6085/6095/6095F/6131 ethernet switch chip support"
- select NET_DSA_MV88E6XXX
- select NET_DSA_MV88E6XXX_NEED_PPU
- select NET_DSA_TAG_DSA
- ---help---
- This enables support for the Marvell 88E6085/6095/6095F/6131
- ethernet switch chips.
-
-config NET_DSA_MV88E6123_61_65
- tristate "Marvell 88E6123/6161/6165 ethernet switch chip support"
- select NET_DSA_MV88E6XXX
- select NET_DSA_TAG_EDSA
- ---help---
- This enables support for the Marvell 88E6123/6161/6165
- ethernet switch chips.
-
endif
diff --git a/net/dsa/Makefile b/net/dsa/Makefile
index 191dd48..7b9fcbb 100644
--- a/net/dsa/Makefile
+++ b/net/dsa/Makefile
@@ -6,14 +6,3 @@ dsa_core-y += dsa.o slave.o
dsa_core-$(CONFIG_NET_DSA_TAG_DSA) += tag_dsa.o
dsa_core-$(CONFIG_NET_DSA_TAG_EDSA) += tag_edsa.o
dsa_core-$(CONFIG_NET_DSA_TAG_TRAILER) += tag_trailer.o
-
-# switch drivers
-obj-$(CONFIG_NET_DSA_MV88E6060) += mv88e6060.o
-obj-$(CONFIG_NET_DSA_MV88E6XXX) += mv88e6xxx_drv.o
-mv88e6xxx_drv-y += mv88e6xxx.o
-ifdef CONFIG_NET_DSA_MV88E6123_61_65
-mv88e6xxx_drv-y += mv88e6123_61_65.o
-endif
-ifdef CONFIG_NET_DSA_MV88E6131
-mv88e6xxx_drv-y += mv88e6131.o
-endif
--
1.7.7.3
next prev parent reply other threads:[~2011-11-28 3:08 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-11-28 3:05 [PATCH 1/3] dsa: Remove unnecessary exports Ben Hutchings
2011-11-28 3:06 ` [PATCH net-next 2/3] dsa: Move all definitions needed by drivers into <net/dsa.h> Ben Hutchings
2011-11-28 21:13 ` Lennert Buytenhek
2011-11-29 6:20 ` David Miller
2011-11-28 3:08 ` Ben Hutchings [this message]
2011-11-28 3:16 ` [PATCH net-next 3/3] dsa: Move switch drivers to new directory drivers/net/dsa Joe Perches
2011-11-28 21:13 ` Lennert Buytenhek
2011-11-29 6:20 ` David Miller
2011-11-28 21:13 ` [PATCH 1/3] dsa: Remove unnecessary exports Lennert Buytenhek
2011-11-29 6:20 ` David Miller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1322449713.7454.36.camel@deadeye \
--to=ben@decadent.org.uk \
--cc=buytenh@wantstofly.org \
--cc=davem@davemloft.net \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).