From: Eric Dumazet <eric.dumazet-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
To: David Miller <davem-fT/PcQaiUtIeIZ0/mPfg9Q@public.gmane.org>
Cc: dev-yBygre7rU0TnMu66kgdUjQ@public.gmane.org,
chrisw-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org,
netdev-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
Florian Westphal <fw-HFFVJYpyMKqzQB+pC5nmwQ@public.gmane.org>,
jhs-jkUAjuhPggJWk0Htik3J/w@public.gmane.org,
john.r.fastabend-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org,
herbert-F6s6mLieUQo7FNHlEwC/lvQIK84fMopw@public.gmane.org,
Stephen Hemminger
<shemminger-ZtmgI6mnKB3QT0dZR+AlfA@public.gmane.org>,
Dan Siemon <dan-BZ4SNL/Vixll57MIdRCFDg@public.gmane.org>
Subject: [PATCH net-next 1/4] net: introduce skb_flow_dissect()
Date: Mon, 28 Nov 2011 16:22:18 +0100 [thread overview]
Message-ID: <1322493738.2292.69.camel@edumazet-HP-Compaq-6005-Pro-SFF-PC> (raw)
We use at least two flow dissectors in network stack, with known
limitations and code duplication.
Introduce skb_flow_dissect() to factorize this, highly inspired from
existing dissector from __skb_get_rxhash()
Note : We extensively use skb_header_pointer(), this permits us to not
touch skb at all.
Signed-off-by: Eric Dumazet <eric.dumazet-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
---
include/net/flow_keys.h | 15 ++++
net/core/Makefile | 2
net/core/flow_dissector.c | 134 ++++++++++++++++++++++++++++++++++++
3 files changed, 150 insertions(+), 1 deletion(-)
diff --git a/include/net/flow_keys.h b/include/net/flow_keys.h
new file mode 100644
index 0000000..7a61e21
--- /dev/null
+++ b/include/net/flow_keys.h
@@ -0,0 +1,15 @@
+#ifndef _NET_FLOW_KEYS_H
+#define _NET_FLOW_KEYS_H
+
+struct flow_keys {
+ __be32 src;
+ __be32 dst;
+ union {
+ __be32 ports;
+ __be16 port16[2];
+ };
+ u8 ip_proto;
+};
+
+extern bool skb_flow_dissect(const struct sk_buff *skb, struct flow_keys *flow);
+#endif
diff --git a/net/core/Makefile b/net/core/Makefile
index 3606d40..c4ecc86 100644
--- a/net/core/Makefile
+++ b/net/core/Makefile
@@ -3,7 +3,7 @@
#
obj-y := sock.o request_sock.o skbuff.o iovec.o datagram.o stream.o scm.o \
- gen_stats.o gen_estimator.o net_namespace.o secure_seq.o
+ gen_stats.o gen_estimator.o net_namespace.o secure_seq.o flow_dissector.o
obj-$(CONFIG_SYSCTL) += sysctl_net_core.o
diff --git a/net/core/flow_dissector.c b/net/core/flow_dissector.c
new file mode 100644
index 0000000..d0e085b
--- /dev/null
+++ b/net/core/flow_dissector.c
@@ -0,0 +1,134 @@
+#include <linux/skbuff.h>
+#include <linux/ip.h>
+#include <linux/ipv6.h>
+#include <linux/if_vlan.h>
+#include <net/ip.h>
+#include <linux/if_tunnel.h>
+#include <linux/if_pppox.h>
+#include <linux/ppp_defs.h>
+#include <net/flow_keys.h>
+
+
+bool skb_flow_dissect(const struct sk_buff *skb, struct flow_keys *flow)
+{
+ int poff, nhoff = skb_network_offset(skb);
+ u8 ip_proto;
+ u16 proto = skb->protocol;
+
+ memset(flow, 0, sizeof(*flow));
+
+again:
+ switch (proto) {
+ case __constant_htons(ETH_P_IP): {
+ const struct iphdr *iph;
+ struct iphdr _iph;
+ip:
+ iph = skb_header_pointer(skb, nhoff, sizeof(_iph), &_iph);
+ if (!iph)
+ return false;
+
+ if (ip_is_fragment(iph))
+ ip_proto = 0;
+ else
+ ip_proto = iph->protocol;
+ flow->src = iph->saddr;
+ flow->dst = iph->daddr;
+ nhoff += iph->ihl * 4;
+ break;
+ }
+ case __constant_htons(ETH_P_IPV6): {
+ const struct ipv6hdr *iph;
+ struct ipv6hdr _iph;
+ipv6:
+ iph = skb_header_pointer(skb, nhoff, sizeof(_iph), &_iph);
+ if (!iph)
+ return false;
+
+ ip_proto = iph->nexthdr;
+ flow->src = iph->saddr.s6_addr32[3];
+ flow->dst = iph->daddr.s6_addr32[3];
+ nhoff += sizeof(struct ipv6hdr);
+ break;
+ }
+ case __constant_htons(ETH_P_8021Q): {
+ const struct vlan_hdr *vlan;
+ struct vlan_hdr _vlan;
+
+ vlan = skb_header_pointer(skb, nhoff, sizeof(_vlan), &_vlan);
+ if (!vlan)
+ return false;
+
+ proto = vlan->h_vlan_encapsulated_proto;
+ nhoff += sizeof(*vlan);
+ goto again;
+ }
+ case __constant_htons(ETH_P_PPP_SES): {
+ struct {
+ struct pppoe_hdr hdr;
+ __be16 proto;
+ } *hdr, _hdr;
+ hdr = skb_header_pointer(skb, nhoff, sizeof(_hdr), &_hdr);
+ if (!hdr)
+ return false;
+ proto = hdr->proto;
+ nhoff += PPPOE_SES_HLEN;
+ switch (proto) {
+ case __constant_htons(PPP_IP):
+ goto ip;
+ case __constant_htons(PPP_IPV6):
+ goto ipv6;
+ default:
+ return false;
+ }
+ }
+ default:
+ return false;
+ }
+
+ switch (ip_proto) {
+ case IPPROTO_GRE: {
+ struct gre_hdr {
+ __be16 flags;
+ __be16 proto;
+ } *hdr, _hdr;
+
+ hdr = skb_header_pointer(skb, nhoff, sizeof(_hdr), &_hdr);
+ if (!hdr)
+ return false;
+ /*
+ * Only look inside GRE if version zero and no
+ * routing
+ */
+ if (!(hdr->flags & (GRE_VERSION|GRE_ROUTING))) {
+ proto = hdr->proto;
+ nhoff += 4;
+ if (hdr->flags & GRE_CSUM)
+ nhoff += 4;
+ if (hdr->flags & GRE_KEY)
+ nhoff += 4;
+ if (hdr->flags & GRE_SEQ)
+ nhoff += 4;
+ goto again;
+ }
+ break;
+ }
+ case IPPROTO_IPIP:
+ goto again;
+ default:
+ break;
+ }
+
+ flow->ip_proto = ip_proto;
+ poff = proto_ports_offset(ip_proto);
+ if (poff >= 0) {
+ __be32 *ports, _ports;
+
+ nhoff += poff;
+ ports = skb_header_pointer(skb, nhoff, sizeof(_ports), &_ports);
+ if (ports)
+ flow->ports = *ports;
+ }
+
+ return true;
+}
+EXPORT_SYMBOL(skb_flow_dissect);
next reply other threads:[~2011-11-28 15:22 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-11-28 15:22 Eric Dumazet [this message]
2011-11-28 16:25 ` [PATCH net-next 1/4] net: introduce skb_flow_dissect() Dimitris Michailidis
[not found] ` <4ED3B603.4010702-ut6Up61K2wZBDgjK7y7TUQ@public.gmane.org>
2011-11-29 0:06 ` David Miller
2011-11-29 6:30 ` [PATCH net-next] flow_dissector: use a 64bit load/store Eric Dumazet
2011-11-29 18:23 ` David Miller
2011-11-29 0:09 ` [PATCH net-next 1/4] net: introduce skb_flow_dissect() David Miller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1322493738.2292.69.camel@edumazet-HP-Compaq-6005-Pro-SFF-PC \
--to=eric.dumazet-re5jqeeqqe8avxtiumwx3w@public.gmane.org \
--cc=chrisw-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org \
--cc=dan-BZ4SNL/Vixll57MIdRCFDg@public.gmane.org \
--cc=davem-fT/PcQaiUtIeIZ0/mPfg9Q@public.gmane.org \
--cc=dev-yBygre7rU0TnMu66kgdUjQ@public.gmane.org \
--cc=fw-HFFVJYpyMKqzQB+pC5nmwQ@public.gmane.org \
--cc=herbert-F6s6mLieUQo7FNHlEwC/lvQIK84fMopw@public.gmane.org \
--cc=jhs-jkUAjuhPggJWk0Htik3J/w@public.gmane.org \
--cc=john.r.fastabend-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org \
--cc=netdev-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=shemminger-ZtmgI6mnKB3QT0dZR+AlfA@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox