Re: [PATCH v4 0/10] bql: Byte Queue Limits

[Ben Hutchings <bhutchings@solarflare.com>]

On Tue, 2011-11-29 at 08:02 +0100, Eric Dumazet wrote:
> Le mardi 29 novembre 2011 à 05:23 +0100, Dave Taht a écrit :
> > > In this test 100 netperf TCP_STREAMs were started to saturate the link.
> > > A single instance of a netperf TCP_RR was run with high priority set.
> > > Queuing discipline in pfifo_fast, NIC is e1000 with TX ring size set to
> > > 1024.  tps for the high priority RR is listed.
> > >
> > > No BQL, tso on: 3000-3200K bytes in queue: 36 tps
> > > BQL, tso on: 156-194K bytes in queue, 535 tps
> > 
> > > No BQL, tso off: 453-454K bytes int queue, 234 tps
> > > BQL, tso off: 66K bytes in queue, 914 tps
> > 
> > 
> > Jeeze. Under what circumstances is tso a win? I've always
> > had great trouble with it, as some e1000 cards do it rather badly.
> > 
> > I assume these are while running at GigE speeds?
> > 
> > What of 100Mbit? 10GigE? (I will duplicate your tests
> > at 100Mbit, but as for 10gigE...)
> > 
> 
> TSO on means a low priority 65Kbytes packet can be in TX ring right
> before the high priority packet. If you cant afford the delay, you lose.
> 
> There is no mystery here.
> 
> If you want low latencies :
> - TSO must be disabled so that packets are at most one ethernet frame. 
[...]

Not if you separate hardware queues by priority (and your high priority
packets are non-TCP or PuSHed).

Ben.

-- 
Ben Hutchings, Staff Engineer, Solarflare
Not speaking for my employer; that's the marketing department's job.
They asked us to note that Solarflare product names are trademarked.