From: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
To: davem@davemloft.net
Cc: Bruce Allan <bruce.w.allan@intel.com>,
netdev@vger.kernel.org, gospo@redhat.com, sassmann@redhat.com,
Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Subject: [net-next 07/11] e1000e: cleanup Rx checksum offload code
Date: Tue, 3 Jan 2012 11:19:12 -0800 [thread overview]
Message-ID: <1325618356-2655-8-git-send-email-jeffrey.t.kirsher@intel.com> (raw)
In-Reply-To: <1325618356-2655-1-git-send-email-jeffrey.t.kirsher@intel.com>
From: Bruce Allan <bruce.w.allan@intel.com>
1) cleanup whitespace in e1000_rx_checksum() function header comment
2) do not check hardware checksum when Rx checksum is disabled
3) reduce duplicated calls to le16_to_cpu() by just using it within
e1000_rx_checksum() instead of in each call to the function
Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
drivers/net/ethernet/intel/e1000e/netdev.c | 25 ++++++++++++++-----------
1 files changed, 14 insertions(+), 11 deletions(-)
diff --git a/drivers/net/ethernet/intel/e1000e/netdev.c b/drivers/net/ethernet/intel/e1000e/netdev.c
index 3911401..e01ffce 100644
--- a/drivers/net/ethernet/intel/e1000e/netdev.c
+++ b/drivers/net/ethernet/intel/e1000e/netdev.c
@@ -487,10 +487,10 @@ static void e1000_receive_skb(struct e1000_adapter *adapter,
/**
* e1000_rx_checksum - Receive Checksum Offload
- * @adapter: board private structure
- * @status_err: receive descriptor status and error fields
- * @csum: receive descriptor csum field
- * @sk_buff: socket buffer with received data
+ * @adapter: board private structure
+ * @status_err: receive descriptor status and error fields
+ * @csum: receive descriptor csum field
+ * @sk_buff: socket buffer with received data
**/
static void e1000_rx_checksum(struct e1000_adapter *adapter, u32 status_err,
u32 csum, struct sk_buff *skb)
@@ -500,9 +500,14 @@ static void e1000_rx_checksum(struct e1000_adapter *adapter, u32 status_err,
skb_checksum_none_assert(skb);
+ /* Rx checksum disabled */
+ if (!(adapter->netdev->features & NETIF_F_RXCSUM))
+ return;
+
/* Ignore Checksum bit is set */
if (status & E1000_RXD_STAT_IXSM)
return;
+
/* TCP/UDP checksum error bit is set */
if (errors & E1000_RXD_ERR_TCPE) {
/* let the stack verify checksum errors */
@@ -524,7 +529,7 @@ static void e1000_rx_checksum(struct e1000_adapter *adapter, u32 status_err,
* Hardware complements the payload checksum, so we undo it
* and then put the value in host order for further stack use.
*/
- __sum16 sum = (__force __sum16)htons(csum);
+ __sum16 sum = (__force __sum16)htons(le16_to_cpu(csum));
skb->csum = csum_unfold(~sum);
skb->ip_summed = CHECKSUM_COMPLETE;
}
@@ -957,8 +962,7 @@ static bool e1000_clean_rx_irq(struct e1000_adapter *adapter,
/* Receive Checksum Offload */
e1000_rx_checksum(adapter, staterr,
- le16_to_cpu(rx_desc->wb.lower.hi_dword.
- csum_ip.csum), skb);
+ rx_desc->wb.lower.hi_dword.csum_ip.csum, skb);
e1000_receive_skb(adapter, netdev, skb, staterr,
rx_desc->wb.upper.vlan);
@@ -1318,8 +1322,8 @@ copydone:
total_rx_bytes += skb->len;
total_rx_packets++;
- e1000_rx_checksum(adapter, staterr, le16_to_cpu(
- rx_desc->wb.lower.hi_dword.csum_ip.csum), skb);
+ e1000_rx_checksum(adapter, staterr,
+ rx_desc->wb.lower.hi_dword.csum_ip.csum, skb);
if (rx_desc->wb.upper.header_status &
cpu_to_le16(E1000_RXDPS_HDRSTAT_HDRSP))
@@ -1491,8 +1495,7 @@ static bool e1000_clean_jumbo_rx_irq(struct e1000_adapter *adapter,
/* Receive Checksum Offload XXX recompute due to CRC strip? */
e1000_rx_checksum(adapter, staterr,
- le16_to_cpu(rx_desc->wb.lower.hi_dword.
- csum_ip.csum), skb);
+ rx_desc->wb.lower.hi_dword.csum_ip.csum, skb);
/* probably a little skewed due to removing CRC */
total_rx_bytes += skb->len;
--
1.7.7.4
next prev parent reply other threads:[~2012-01-03 19:19 UTC|newest]
Thread overview: 29+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-01-03 19:19 [net-next 00/11][pull request] Intel Wired LAN Driver Updates Jeff Kirsher
2012-01-03 19:19 ` [net-next 01/11] e1000: fix lockdep splat in shutdown handler Jeff Kirsher
2012-01-03 19:19 ` [net-next 02/11] igb: Add support for byte queue limits Jeff Kirsher
2012-01-03 19:19 ` [net-next 03/11] igb: add basic runtime PM support Jeff Kirsher
2012-01-03 19:19 ` [net-next 04/11] igb: reset PHY after recovering from PHY power down Jeff Kirsher
2012-01-03 19:19 ` [net-next 05/11] netdev: FCoE: Add new ndo_get_fcoe_hbainfo() call Jeff Kirsher
2012-01-03 20:07 ` David Miller
2012-01-03 20:53 ` Parikh, Neerav
2012-01-03 19:19 ` [net-next 06/11] ixgbe: FCoE: Add support for " Jeff Kirsher
2012-01-03 19:19 ` Jeff Kirsher [this message]
2012-01-03 20:08 ` [net-next 07/11] e1000e: cleanup Rx checksum offload code David Miller
2012-01-03 20:17 ` Allan, Bruce W
2012-01-03 21:00 ` Ben Hutchings
2012-01-03 21:15 ` David Miller
2012-01-03 21:24 ` Ben Hutchings
2012-01-03 22:02 ` David Miller
2012-01-03 19:19 ` [net-next 08/11] e1000e: add Receive Packet Steering (RPS) support Jeff Kirsher
2012-01-03 20:09 ` David Miller
2012-01-03 20:16 ` Allan, Bruce W
2012-01-03 20:27 ` David Miller
2012-01-03 20:28 ` Allan, Bruce W
2012-01-04 0:12 ` Joe Perches
2012-01-04 2:06 ` Harvey Harrison
2012-01-03 21:05 ` Ben Hutchings
2012-01-06 17:22 ` Allan, Bruce W
2012-01-06 17:31 ` Ben Hutchings
2012-01-03 19:19 ` [net-next 09/11] e1000e: re-enable alternate MAC address for all devices which support it Jeff Kirsher
2012-01-03 19:19 ` [net-next 10/11] e1000e: convert head, tail and itr_register offsets to __iomem pointers Jeff Kirsher
2012-01-03 19:19 ` [net-next 11/11] e1000e: pass pointer to ring struct instead of adapter struct Jeff Kirsher
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1325618356-2655-8-git-send-email-jeffrey.t.kirsher@intel.com \
--to=jeffrey.t.kirsher@intel.com \
--cc=bruce.w.allan@intel.com \
--cc=davem@davemloft.net \
--cc=gospo@redhat.com \
--cc=netdev@vger.kernel.org \
--cc=sassmann@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).