From: Ben Hutchings <bhutchings@solarflare.com>
To: David Miller <davem@davemloft.net>
Cc: <netdev@vger.kernel.org>, <linux-net-drivers@solarflare.com>,
Alexander Duyck <alexander.h.duyck@intel.com>
Subject: [PATCHv2 net-next 8/8] ethtool: Remove ethtool_ops::set_rx_ntuple operation
Date: Tue, 3 Jan 2012 22:07:59 +0000 [thread overview]
Message-ID: <1325628479.2832.45.camel@bwh-desktop> (raw)
In-Reply-To: <1325627819.2832.31.camel@bwh-desktop>
All implementations have been converted to implement set_rxnfc
instead.
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
---
include/linux/ethtool.h | 4 ---
net/core/ethtool.c | 55 -----------------------------------------------
2 files changed, 0 insertions(+), 59 deletions(-)
diff --git a/include/linux/ethtool.h b/include/linux/ethtool.h
index d901714..da5b2de 100644
--- a/include/linux/ethtool.h
+++ b/include/linux/ethtool.h
@@ -859,8 +859,6 @@ static inline u32 ethtool_rxfh_indir_default(u32 index, u32 n_rx_rings)
* @reset: Reset (part of) the device, as specified by a bitmask of
* flags from &enum ethtool_reset_flags. Returns a negative
* error code or zero.
- * @set_rx_ntuple: Set an RX n-tuple rule. Returns a negative error code
- * or zero.
* @get_rxfh_indir_size: Get the size of the RX flow hash indirection table.
* Returns zero if not supported for this specific device.
* @get_rxfh_indir: Get the contents of the RX flow hash indirection table.
@@ -929,8 +927,6 @@ struct ethtool_ops {
int (*set_rxnfc)(struct net_device *, struct ethtool_rxnfc *);
int (*flash_device)(struct net_device *, struct ethtool_flash *);
int (*reset)(struct net_device *, u32 *);
- int (*set_rx_ntuple)(struct net_device *,
- struct ethtool_rx_ntuple *);
u32 (*get_rxfh_indir_size)(struct net_device *);
int (*get_rxfh_indir)(struct net_device *, u32 *);
int (*set_rxfh_indir)(struct net_device *, const u32 *);
diff --git a/net/core/ethtool.c b/net/core/ethtool.c
index e88b80d..921aa2b 100644
--- a/net/core/ethtool.c
+++ b/net/core/ethtool.c
@@ -631,58 +631,6 @@ out:
return ret;
}
-/*
- * ethtool does not (or did not) set masks for flow parameters that are
- * not specified, so if both value and mask are 0 then this must be
- * treated as equivalent to a mask with all bits set. Implement that
- * here rather than in drivers.
- */
-static void rx_ntuple_fix_masks(struct ethtool_rx_ntuple_flow_spec *fs)
-{
- struct ethtool_tcpip4_spec *entry = &fs->h_u.tcp_ip4_spec;
- struct ethtool_tcpip4_spec *mask = &fs->m_u.tcp_ip4_spec;
-
- if (fs->flow_type != TCP_V4_FLOW &&
- fs->flow_type != UDP_V4_FLOW &&
- fs->flow_type != SCTP_V4_FLOW)
- return;
-
- if (!(entry->ip4src | mask->ip4src))
- mask->ip4src = htonl(0xffffffff);
- if (!(entry->ip4dst | mask->ip4dst))
- mask->ip4dst = htonl(0xffffffff);
- if (!(entry->psrc | mask->psrc))
- mask->psrc = htons(0xffff);
- if (!(entry->pdst | mask->pdst))
- mask->pdst = htons(0xffff);
- if (!(entry->tos | mask->tos))
- mask->tos = 0xff;
- if (!(fs->vlan_tag | fs->vlan_tag_mask))
- fs->vlan_tag_mask = 0xffff;
- if (!(fs->data | fs->data_mask))
- fs->data_mask = 0xffffffffffffffffULL;
-}
-
-static noinline_for_stack int ethtool_set_rx_ntuple(struct net_device *dev,
- void __user *useraddr)
-{
- struct ethtool_rx_ntuple cmd;
- const struct ethtool_ops *ops = dev->ethtool_ops;
-
- if (!ops->set_rx_ntuple)
- return -EOPNOTSUPP;
-
- if (!(dev->features & NETIF_F_NTUPLE))
- return -EINVAL;
-
- if (copy_from_user(&cmd, useraddr, sizeof(cmd)))
- return -EFAULT;
-
- rx_ntuple_fix_masks(&cmd.fs);
-
- return ops->set_rx_ntuple(dev, &cmd);
-}
-
static int ethtool_get_regs(struct net_device *dev, char __user *useraddr)
{
struct ethtool_regs regs;
@@ -1495,9 +1443,6 @@ int dev_ethtool(struct net *net, struct ifreq *ifr)
case ETHTOOL_RESET:
rc = ethtool_reset(dev, useraddr);
break;
- case ETHTOOL_SRXNTUPLE:
- rc = ethtool_set_rx_ntuple(dev, useraddr);
- break;
case ETHTOOL_GSSET_INFO:
rc = ethtool_get_sset_info(dev, useraddr);
break;
--
1.7.4.4
--
Ben Hutchings, Staff Engineer, Solarflare
Not speaking for my employer; that's the marketing department's job.
They asked us to note that Solarflare product names are trademarked.
next prev parent reply other threads:[~2012-01-03 22:08 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-01-03 21:56 [PATCHv2 net-next 0/8] RX NFC support for hash-based filters Ben Hutchings
2012-01-03 21:59 ` [PATCHv2 net-next 1/8] gianfar: Reject out-of-range RX NFC locations Ben Hutchings
2012-01-03 22:04 ` [PATCHv2 net-next 2/8] ethtool: Allow drivers to select RX NFC rule locations Ben Hutchings
2012-01-03 22:05 ` [PATCHv2 net-next 3/8] sfc: Change filter ID generation to satisfy priority semantics of RX NFC Ben Hutchings
2012-01-03 22:05 ` [PATCHv2 net-next 4/8] sfc: Use consistent types for filter IDs, indices and search depths Ben Hutchings
2012-01-03 22:05 ` [PATCHv2 net-next 5/8] sfc: Add support for retrieving and removing filters by ID Ben Hutchings
2012-01-03 22:05 ` [PATCHv2 net-next 6/8] sfc: Implement ethtool RX NFC rules API instead of n-tuple API Ben Hutchings
2012-01-03 22:05 ` [PATCHv2 net-next 7/8] sfc: Remove now-unused filter function Ben Hutchings
2012-01-03 22:07 ` Ben Hutchings [this message]
2012-01-03 22:24 ` [PATCHv2 ethtool 1/3] ethtool-copy.h: sync with net-next Ben Hutchings
2012-01-03 22:24 ` [PATCHv2 ethtool 2/3] rxclass: Use RX_CLS_LOC_{ANY,SPECIAL} in place of RX_CLS_LOC_UNSPEC Ben Hutchings
2012-01-03 22:25 ` [PATCHv2 ethtool 3/3] rxclass: Allow driver to select RX NFC rule location Ben Hutchings
2012-01-04 19:11 ` [PATCHv2 net-next 0/8] RX NFC support for hash-based filters David Miller
2012-01-04 21:39 ` Ben Hutchings
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1325628479.2832.45.camel@bwh-desktop \
--to=bhutchings@solarflare.com \
--cc=alexander.h.duyck@intel.com \
--cc=davem@davemloft.net \
--cc=linux-net-drivers@solarflare.com \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).