* [net-next 1/8] e1000: fix lockdep splat in shutdown handler
2012-01-05 6:23 [net-next v2 0/8][pull request] Intel Wired LAN Driver Updates Jeff Kirsher
@ 2012-01-05 6:23 ` Jeff Kirsher
2012-01-05 6:23 ` [net-next 2/8] e1000: unmap ce4100_gbe_mdio_base_virt in e1000_remove Jeff Kirsher
` (7 subsequent siblings)
8 siblings, 0 replies; 11+ messages in thread
From: Jeff Kirsher @ 2012-01-05 6:23 UTC (permalink / raw)
To: davem; +Cc: Jesse Brandeburg, netdev, gospo, sassmann, Jeff Kirsher
From: Jesse Brandeburg <jesse.brandeburg@intel.com>
As reported by Steven Rostedt, e1000 has a lockdep splat added
during the recent merge window. The issue is that
cancel_delayed_work is called while holding our private mutex.
There is no reason that I can see to hold the mutex during pci
shutdown, it was more just paranoia that I put the mutex_lock
around the call to e1000_down.
In a quick survey lots of drivers handle locking differently when
being called by the pci layer. The assumption here is that we
don't need the mutexes' protection in this function because
the driver could not be unloaded while in the shutdown handler
which is only called at reboot or poweroff.
Reported-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: Steven Rostedt <rostedt@goodmis.org>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
drivers/net/ethernet/intel/e1000/e1000_main.c | 8 +-------
1 files changed, 1 insertions(+), 7 deletions(-)
diff --git a/drivers/net/ethernet/intel/e1000/e1000_main.c b/drivers/net/ethernet/intel/e1000/e1000_main.c
index 985d589..934d5aa 100644
--- a/drivers/net/ethernet/intel/e1000/e1000_main.c
+++ b/drivers/net/ethernet/intel/e1000/e1000_main.c
@@ -4724,8 +4724,6 @@ static int __e1000_shutdown(struct pci_dev *pdev, bool *enable_wake)
netif_device_detach(netdev);
- mutex_lock(&adapter->mutex);
-
if (netif_running(netdev)) {
WARN_ON(test_bit(__E1000_RESETTING, &adapter->flags));
e1000_down(adapter);
@@ -4733,10 +4731,8 @@ static int __e1000_shutdown(struct pci_dev *pdev, bool *enable_wake)
#ifdef CONFIG_PM
retval = pci_save_state(pdev);
- if (retval) {
- mutex_unlock(&adapter->mutex);
+ if (retval)
return retval;
- }
#endif
status = er32(STATUS);
@@ -4791,8 +4787,6 @@ static int __e1000_shutdown(struct pci_dev *pdev, bool *enable_wake)
if (netif_running(netdev))
e1000_free_irq(adapter);
- mutex_unlock(&adapter->mutex);
-
pci_disable_device(pdev);
return 0;
--
1.7.7.5
^ permalink raw reply related [flat|nested] 11+ messages in thread* [net-next 2/8] e1000: unmap ce4100_gbe_mdio_base_virt in e1000_remove
2012-01-05 6:23 [net-next v2 0/8][pull request] Intel Wired LAN Driver Updates Jeff Kirsher
2012-01-05 6:23 ` [net-next 1/8] e1000: fix lockdep splat in shutdown handler Jeff Kirsher
@ 2012-01-05 6:23 ` Jeff Kirsher
2012-01-05 6:23 ` [net-next 3/8] e1000: cleanup CE4100 MDIO registers access Jeff Kirsher
` (6 subsequent siblings)
8 siblings, 0 replies; 11+ messages in thread
From: Jeff Kirsher @ 2012-01-05 6:23 UTC (permalink / raw)
To: davem; +Cc: Florian Fainelli, netdev, gospo, sassmann, Jeff Kirsher
From: Florian Fainelli <ffainelli@freebox.fr>
We are not unmapping ce4100_gbe_mdio_base_virt in exit path in case
we are running on a CE4100 adapter, fix that.
Signed-off-by: Florian Fainelli <ffainelli@freebox.fr>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
drivers/net/ethernet/intel/e1000/e1000_main.c | 2 ++
1 files changed, 2 insertions(+), 0 deletions(-)
diff --git a/drivers/net/ethernet/intel/e1000/e1000_main.c b/drivers/net/ethernet/intel/e1000/e1000_main.c
index 934d5aa..9cf07f6 100644
--- a/drivers/net/ethernet/intel/e1000/e1000_main.c
+++ b/drivers/net/ethernet/intel/e1000/e1000_main.c
@@ -1286,6 +1286,8 @@ static void __devexit e1000_remove(struct pci_dev *pdev)
kfree(adapter->tx_ring);
kfree(adapter->rx_ring);
+ if (hw->mac_type == e1000_ce4100)
+ iounmap(ce4100_gbe_mdio_base_virt);
iounmap(hw->hw_addr);
if (hw->flash_address)
iounmap(hw->flash_address);
--
1.7.7.5
^ permalink raw reply related [flat|nested] 11+ messages in thread* [net-next 3/8] e1000: cleanup CE4100 MDIO registers access
2012-01-05 6:23 [net-next v2 0/8][pull request] Intel Wired LAN Driver Updates Jeff Kirsher
2012-01-05 6:23 ` [net-next 1/8] e1000: fix lockdep splat in shutdown handler Jeff Kirsher
2012-01-05 6:23 ` [net-next 2/8] e1000: unmap ce4100_gbe_mdio_base_virt in e1000_remove Jeff Kirsher
@ 2012-01-05 6:23 ` Jeff Kirsher
2012-01-05 6:23 ` [net-next 4/8] igb: Add support for byte queue limits Jeff Kirsher
` (5 subsequent siblings)
8 siblings, 0 replies; 11+ messages in thread
From: Jeff Kirsher @ 2012-01-05 6:23 UTC (permalink / raw)
To: davem; +Cc: Florian Fainelli, netdev, gospo, sassmann, Jeff Kirsher
From: Florian Fainelli <ffainelli@freebox.fr>
A global variable is currently used to hold the virtual address of the
CE4100 MDIO base register address. Store the address in the e1000_hw
structure and update macros accordingly.
Signed-off-by: Florian Fainelli <ffainelli@freebox.fr>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
drivers/net/ethernet/intel/e1000/e1000_hw.h | 4 ++--
drivers/net/ethernet/intel/e1000/e1000_main.c | 15 +++++----------
2 files changed, 7 insertions(+), 12 deletions(-)
diff --git a/drivers/net/ethernet/intel/e1000/e1000_hw.h b/drivers/net/ethernet/intel/e1000/e1000_hw.h
index cf7e3c0..f6c4d7e 100644
--- a/drivers/net/ethernet/intel/e1000/e1000_hw.h
+++ b/drivers/net/ethernet/intel/e1000/e1000_hw.h
@@ -812,8 +812,7 @@ struct e1000_ffvt_entry {
#define E1000_FLA 0x0001C /* Flash Access - RW */
#define E1000_MDIC 0x00020 /* MDI Control - RW */
-extern void __iomem *ce4100_gbe_mdio_base_virt;
-#define INTEL_CE_GBE_MDIO_RCOMP_BASE (ce4100_gbe_mdio_base_virt)
+#define INTEL_CE_GBE_MDIO_RCOMP_BASE (hw->ce4100_gbe_mdio_base_virt)
#define E1000_MDIO_STS (INTEL_CE_GBE_MDIO_RCOMP_BASE + 0)
#define E1000_MDIO_CMD (INTEL_CE_GBE_MDIO_RCOMP_BASE + 4)
#define E1000_MDIO_DRV (INTEL_CE_GBE_MDIO_RCOMP_BASE + 8)
@@ -1343,6 +1342,7 @@ struct e1000_hw_stats {
struct e1000_hw {
u8 __iomem *hw_addr;
u8 __iomem *flash_address;
+ void __iomem *ce4100_gbe_mdio_base_virt;
e1000_mac_type mac_type;
e1000_phy_type phy_type;
u32 phy_init_script;
diff --git a/drivers/net/ethernet/intel/e1000/e1000_main.c b/drivers/net/ethernet/intel/e1000/e1000_main.c
index 9cf07f6..669ca38 100644
--- a/drivers/net/ethernet/intel/e1000/e1000_main.c
+++ b/drivers/net/ethernet/intel/e1000/e1000_main.c
@@ -33,11 +33,6 @@
#include <linux/bitops.h>
#include <linux/if_vlan.h>
-/* Intel Media SOC GbE MDIO physical base address */
-static unsigned long ce4100_gbe_mdio_base_phy;
-/* Intel Media SOC GbE MDIO virtual base address */
-void __iomem *ce4100_gbe_mdio_base_virt;
-
char e1000_driver_name[] = "e1000";
static char e1000_driver_string[] = "Intel(R) PRO/1000 Network Driver";
#define DRV_VERSION "7.3.21-k8-NAPI"
@@ -1054,11 +1049,11 @@ static int __devinit e1000_probe(struct pci_dev *pdev,
err = -EIO;
if (hw->mac_type == e1000_ce4100) {
- ce4100_gbe_mdio_base_phy = pci_resource_start(pdev, BAR_1);
- ce4100_gbe_mdio_base_virt = ioremap(ce4100_gbe_mdio_base_phy,
+ hw->ce4100_gbe_mdio_base_virt =
+ ioremap(pci_resource_start(pdev, BAR_1),
pci_resource_len(pdev, BAR_1));
- if (!ce4100_gbe_mdio_base_virt)
+ if (!hw->ce4100_gbe_mdio_base_virt)
goto err_mdio_ioremap;
}
@@ -1249,7 +1244,7 @@ err_eeprom:
err_dma:
err_sw_init:
err_mdio_ioremap:
- iounmap(ce4100_gbe_mdio_base_virt);
+ iounmap(hw->ce4100_gbe_mdio_base_virt);
iounmap(hw->hw_addr);
err_ioremap:
free_netdev(netdev);
@@ -1287,7 +1282,7 @@ static void __devexit e1000_remove(struct pci_dev *pdev)
kfree(adapter->rx_ring);
if (hw->mac_type == e1000_ce4100)
- iounmap(ce4100_gbe_mdio_base_virt);
+ iounmap(hw->ce4100_gbe_mdio_base_virt);
iounmap(hw->hw_addr);
if (hw->flash_address)
iounmap(hw->flash_address);
--
1.7.7.5
^ permalink raw reply related [flat|nested] 11+ messages in thread* [net-next 4/8] igb: Add support for byte queue limits.
2012-01-05 6:23 [net-next v2 0/8][pull request] Intel Wired LAN Driver Updates Jeff Kirsher
` (2 preceding siblings ...)
2012-01-05 6:23 ` [net-next 3/8] e1000: cleanup CE4100 MDIO registers access Jeff Kirsher
@ 2012-01-05 6:23 ` Jeff Kirsher
2012-01-05 6:23 ` [net-next 5/8] igb: add basic runtime PM support Jeff Kirsher
` (4 subsequent siblings)
8 siblings, 0 replies; 11+ messages in thread
From: Jeff Kirsher @ 2012-01-05 6:23 UTC (permalink / raw)
To: davem; +Cc: Eric Dumazet, netdev, gospo, sassmann, Alexander Duyck,
Jeff Kirsher
From: Eric Dumazet <eric.dumazet@gmail.com>
This adds support for byte queue limits (BQL)
Since this driver collects bytes count in 'bytecount' field, use it also
in igb_tx_map()
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
CC: Alexander Duyck <alexander.h.duyck@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
drivers/net/ethernet/intel/igb/igb.h | 5 +++++
drivers/net/ethernet/intel/igb/igb_main.c | 5 +++++
2 files changed, 10 insertions(+), 0 deletions(-)
diff --git a/drivers/net/ethernet/intel/igb/igb.h b/drivers/net/ethernet/intel/igb/igb.h
index c69feeb..3d12e67 100644
--- a/drivers/net/ethernet/intel/igb/igb.h
+++ b/drivers/net/ethernet/intel/igb/igb.h
@@ -447,4 +447,9 @@ static inline s32 igb_get_phy_info(struct e1000_hw *hw)
return 0;
}
+static inline struct netdev_queue *txring_txq(const struct igb_ring *tx_ring)
+{
+ return netdev_get_tx_queue(tx_ring->netdev, tx_ring->queue_index);
+}
+
#endif /* _IGB_H_ */
diff --git a/drivers/net/ethernet/intel/igb/igb_main.c b/drivers/net/ethernet/intel/igb/igb_main.c
index 89d576c..dcc68cc 100644
--- a/drivers/net/ethernet/intel/igb/igb_main.c
+++ b/drivers/net/ethernet/intel/igb/igb_main.c
@@ -3201,6 +3201,7 @@ static void igb_clean_tx_ring(struct igb_ring *tx_ring)
buffer_info = &tx_ring->tx_buffer_info[i];
igb_unmap_and_free_tx_resource(tx_ring, buffer_info);
}
+ netdev_tx_reset_queue(txring_txq(tx_ring));
size = sizeof(struct igb_tx_buffer) * tx_ring->count;
memset(tx_ring->tx_buffer_info, 0, size);
@@ -4238,6 +4239,8 @@ static void igb_tx_map(struct igb_ring *tx_ring,
frag++;
}
+ netdev_tx_sent_queue(txring_txq(tx_ring), first->bytecount);
+
/* write last descriptor with RS and EOP bits */
cmd_type |= cpu_to_le32(size) | cpu_to_le32(IGB_TXD_DCMD);
tx_desc->read.cmd_type_len = cmd_type;
@@ -5777,6 +5780,8 @@ static bool igb_clean_tx_irq(struct igb_q_vector *q_vector)
}
}
+ netdev_tx_completed_queue(txring_txq(tx_ring),
+ total_packets, total_bytes);
i += tx_ring->count;
tx_ring->next_to_clean = i;
u64_stats_update_begin(&tx_ring->tx_syncp);
--
1.7.7.5
^ permalink raw reply related [flat|nested] 11+ messages in thread* [net-next 5/8] igb: add basic runtime PM support
2012-01-05 6:23 [net-next v2 0/8][pull request] Intel Wired LAN Driver Updates Jeff Kirsher
` (3 preceding siblings ...)
2012-01-05 6:23 ` [net-next 4/8] igb: Add support for byte queue limits Jeff Kirsher
@ 2012-01-05 6:23 ` Jeff Kirsher
2012-01-05 6:23 ` [net-next 6/8] igb: reset PHY after recovering from PHY power down Jeff Kirsher
` (3 subsequent siblings)
8 siblings, 0 replies; 11+ messages in thread
From: Jeff Kirsher @ 2012-01-05 6:23 UTC (permalink / raw)
To: davem; +Cc: Yan, Zheng, netdev, gospo, sassmann, Jeff Kirsher
From: "Yan, Zheng" <zheng.z.yan@intel.com>
Use the runtime power management framework to add basic runtime PM support
to the igb driver. Namely, make the driver suspend the device when the link
is off and set it up for generating a wakeup event after the link has been
detected again. This feature is disabled by default.
Based on e1000e's runtime PM code.
Changes since v1:
Don't suspend the device when shutting down the interface.
Avoid race between runtime suspending and ethtool operations.
Signed-off-by: Zheng Yan <zheng.z.yan@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
drivers/net/ethernet/intel/igb/igb_ethtool.c | 16 +++
drivers/net/ethernet/intel/igb/igb_main.c | 136 ++++++++++++++++++++++----
2 files changed, 133 insertions(+), 19 deletions(-)
diff --git a/drivers/net/ethernet/intel/igb/igb_ethtool.c b/drivers/net/ethernet/intel/igb/igb_ethtool.c
index f1206be..7998bf4 100644
--- a/drivers/net/ethernet/intel/igb/igb_ethtool.c
+++ b/drivers/net/ethernet/intel/igb/igb_ethtool.c
@@ -36,6 +36,7 @@
#include <linux/ethtool.h>
#include <linux/sched.h>
#include <linux/slab.h>
+#include <linux/pm_runtime.h>
#include "igb.h"
@@ -2161,6 +2162,19 @@ static void igb_get_strings(struct net_device *netdev, u32 stringset, u8 *data)
}
}
+static int igb_ethtool_begin(struct net_device *netdev)
+{
+ struct igb_adapter *adapter = netdev_priv(netdev);
+ pm_runtime_get_sync(&adapter->pdev->dev);
+ return 0;
+}
+
+static void igb_ethtool_complete(struct net_device *netdev)
+{
+ struct igb_adapter *adapter = netdev_priv(netdev);
+ pm_runtime_put(&adapter->pdev->dev);
+}
+
static const struct ethtool_ops igb_ethtool_ops = {
.get_settings = igb_get_settings,
.set_settings = igb_set_settings,
@@ -2187,6 +2201,8 @@ static const struct ethtool_ops igb_ethtool_ops = {
.get_ethtool_stats = igb_get_ethtool_stats,
.get_coalesce = igb_get_coalesce,
.set_coalesce = igb_set_coalesce,
+ .begin = igb_ethtool_begin,
+ .complete = igb_ethtool_complete,
};
void igb_set_ethtool_ops(struct net_device *netdev)
diff --git a/drivers/net/ethernet/intel/igb/igb_main.c b/drivers/net/ethernet/intel/igb/igb_main.c
index dcc68cc..fac71e2 100644
--- a/drivers/net/ethernet/intel/igb/igb_main.c
+++ b/drivers/net/ethernet/intel/igb/igb_main.c
@@ -53,6 +53,7 @@
#include <linux/if_ether.h>
#include <linux/aer.h>
#include <linux/prefetch.h>
+#include <linux/pm_runtime.h>
#ifdef CONFIG_IGB_DCA
#include <linux/dca.h>
#endif
@@ -172,8 +173,18 @@ static int igb_check_vf_assignment(struct igb_adapter *adapter);
#endif
#ifdef CONFIG_PM
-static int igb_suspend(struct pci_dev *, pm_message_t);
-static int igb_resume(struct pci_dev *);
+static int igb_suspend(struct device *);
+static int igb_resume(struct device *);
+#ifdef CONFIG_PM_RUNTIME
+static int igb_runtime_suspend(struct device *dev);
+static int igb_runtime_resume(struct device *dev);
+static int igb_runtime_idle(struct device *dev);
+#endif
+static const struct dev_pm_ops igb_pm_ops = {
+ SET_SYSTEM_SLEEP_PM_OPS(igb_suspend, igb_resume)
+ SET_RUNTIME_PM_OPS(igb_runtime_suspend, igb_runtime_resume,
+ igb_runtime_idle)
+};
#endif
static void igb_shutdown(struct pci_dev *);
#ifdef CONFIG_IGB_DCA
@@ -214,9 +225,7 @@ static struct pci_driver igb_driver = {
.probe = igb_probe,
.remove = __devexit_p(igb_remove),
#ifdef CONFIG_PM
- /* Power Management Hooks */
- .suspend = igb_suspend,
- .resume = igb_resume,
+ .driver.pm = &igb_pm_ops,
#endif
.shutdown = igb_shutdown,
.err_handler = &igb_err_handler
@@ -2111,6 +2120,8 @@ static int __devinit igb_probe(struct pci_dev *pdev,
default:
break;
}
+
+ pm_runtime_put_noidle(&pdev->dev);
return 0;
err_register:
@@ -2150,6 +2161,8 @@ static void __devexit igb_remove(struct pci_dev *pdev)
struct igb_adapter *adapter = netdev_priv(netdev);
struct e1000_hw *hw = &adapter->hw;
+ pm_runtime_get_noresume(&pdev->dev);
+
/*
* The watchdog timer may be rescheduled, so explicitly
* disable watchdog from being rescheduled.
@@ -2472,16 +2485,22 @@ static int __devinit igb_sw_init(struct igb_adapter *adapter)
* handler is registered with the OS, the watchdog timer is started,
* and the stack is notified that the interface is ready.
**/
-static int igb_open(struct net_device *netdev)
+static int __igb_open(struct net_device *netdev, bool resuming)
{
struct igb_adapter *adapter = netdev_priv(netdev);
struct e1000_hw *hw = &adapter->hw;
+ struct pci_dev *pdev = adapter->pdev;
int err;
int i;
/* disallow open during test */
- if (test_bit(__IGB_TESTING, &adapter->state))
+ if (test_bit(__IGB_TESTING, &adapter->state)) {
+ WARN_ON(resuming);
return -EBUSY;
+ }
+
+ if (!resuming)
+ pm_runtime_get_sync(&pdev->dev);
netif_carrier_off(netdev);
@@ -2527,6 +2546,9 @@ static int igb_open(struct net_device *netdev)
netif_tx_start_all_queues(netdev);
+ if (!resuming)
+ pm_runtime_put(&pdev->dev);
+
/* start the watchdog. */
hw->mac.get_link_status = 1;
schedule_work(&adapter->watchdog_task);
@@ -2541,10 +2563,17 @@ err_setup_rx:
igb_free_all_tx_resources(adapter);
err_setup_tx:
igb_reset(adapter);
+ if (!resuming)
+ pm_runtime_put(&pdev->dev);
return err;
}
+static int igb_open(struct net_device *netdev)
+{
+ return __igb_open(netdev, false);
+}
+
/**
* igb_close - Disables a network interface
* @netdev: network interface device structure
@@ -2556,21 +2585,32 @@ err_setup_tx:
* needs to be disabled. A global MAC reset is issued to stop the
* hardware, and all transmit and receive resources are freed.
**/
-static int igb_close(struct net_device *netdev)
+static int __igb_close(struct net_device *netdev, bool suspending)
{
struct igb_adapter *adapter = netdev_priv(netdev);
+ struct pci_dev *pdev = adapter->pdev;
WARN_ON(test_bit(__IGB_RESETTING, &adapter->state));
- igb_down(adapter);
+ if (!suspending)
+ pm_runtime_get_sync(&pdev->dev);
+
+ igb_down(adapter);
igb_free_irq(adapter);
igb_free_all_tx_resources(adapter);
igb_free_all_rx_resources(adapter);
+ if (!suspending)
+ pm_runtime_put_sync(&pdev->dev);
return 0;
}
+static int igb_close(struct net_device *netdev)
+{
+ return __igb_close(netdev, false);
+}
+
/**
* igb_setup_tx_resources - allocate Tx resources (Descriptors)
* @tx_ring: tx descriptor ring (for a specific queue) to setup
@@ -3631,6 +3671,9 @@ static void igb_watchdog_task(struct work_struct *work)
link = igb_has_link(adapter);
if (link) {
+ /* Cancel scheduled suspend requests. */
+ pm_runtime_resume(netdev->dev.parent);
+
if (!netif_carrier_ok(netdev)) {
u32 ctrl;
hw->mac.ops.get_speed_and_duplex(hw,
@@ -3702,6 +3745,9 @@ static void igb_watchdog_task(struct work_struct *work)
if (!test_bit(__IGB_DOWN, &adapter->state))
mod_timer(&adapter->phy_info_timer,
round_jiffies(jiffies + 2 * HZ));
+
+ pm_schedule_suspend(netdev->dev.parent,
+ MSEC_PER_SEC * 5);
}
}
@@ -6588,13 +6634,14 @@ err_inval:
return -EINVAL;
}
-static int __igb_shutdown(struct pci_dev *pdev, bool *enable_wake)
+static int __igb_shutdown(struct pci_dev *pdev, bool *enable_wake,
+ bool runtime)
{
struct net_device *netdev = pci_get_drvdata(pdev);
struct igb_adapter *adapter = netdev_priv(netdev);
struct e1000_hw *hw = &adapter->hw;
u32 ctrl, rctl, status;
- u32 wufc = adapter->wol;
+ u32 wufc = runtime ? E1000_WUFC_LNKC : adapter->wol;
#ifdef CONFIG_PM
int retval = 0;
#endif
@@ -6602,7 +6649,7 @@ static int __igb_shutdown(struct pci_dev *pdev, bool *enable_wake)
netif_device_detach(netdev);
if (netif_running(netdev))
- igb_close(netdev);
+ __igb_close(netdev, true);
igb_clear_interrupt_scheme(adapter);
@@ -6661,12 +6708,13 @@ static int __igb_shutdown(struct pci_dev *pdev, bool *enable_wake)
}
#ifdef CONFIG_PM
-static int igb_suspend(struct pci_dev *pdev, pm_message_t state)
+static int igb_suspend(struct device *dev)
{
int retval;
bool wake;
+ struct pci_dev *pdev = to_pci_dev(dev);
- retval = __igb_shutdown(pdev, &wake);
+ retval = __igb_shutdown(pdev, &wake, 0);
if (retval)
return retval;
@@ -6680,8 +6728,9 @@ static int igb_suspend(struct pci_dev *pdev, pm_message_t state)
return 0;
}
-static int igb_resume(struct pci_dev *pdev)
+static int igb_resume(struct device *dev)
{
+ struct pci_dev *pdev = to_pci_dev(dev);
struct net_device *netdev = pci_get_drvdata(pdev);
struct igb_adapter *adapter = netdev_priv(netdev);
struct e1000_hw *hw = &adapter->hw;
@@ -6702,7 +6751,18 @@ static int igb_resume(struct pci_dev *pdev)
pci_enable_wake(pdev, PCI_D3hot, 0);
pci_enable_wake(pdev, PCI_D3cold, 0);
- if (igb_init_interrupt_scheme(adapter)) {
+ if (!rtnl_is_locked()) {
+ /*
+ * shut up ASSERT_RTNL() warning in
+ * netif_set_real_num_tx/rx_queues.
+ */
+ rtnl_lock();
+ err = igb_init_interrupt_scheme(adapter);
+ rtnl_unlock();
+ } else {
+ err = igb_init_interrupt_scheme(adapter);
+ }
+ if (err) {
dev_err(&pdev->dev, "Unable to allocate memory for queues\n");
return -ENOMEM;
}
@@ -6715,23 +6775,61 @@ static int igb_resume(struct pci_dev *pdev)
wr32(E1000_WUS, ~0);
- if (netif_running(netdev)) {
- err = igb_open(netdev);
+ if (netdev->flags & IFF_UP) {
+ err = __igb_open(netdev, true);
if (err)
return err;
}
netif_device_attach(netdev);
+ return 0;
+}
+
+#ifdef CONFIG_PM_RUNTIME
+static int igb_runtime_idle(struct device *dev)
+{
+ struct pci_dev *pdev = to_pci_dev(dev);
+ struct net_device *netdev = pci_get_drvdata(pdev);
+ struct igb_adapter *adapter = netdev_priv(netdev);
+
+ if (!igb_has_link(adapter))
+ pm_schedule_suspend(dev, MSEC_PER_SEC * 5);
+
+ return -EBUSY;
+}
+
+static int igb_runtime_suspend(struct device *dev)
+{
+ struct pci_dev *pdev = to_pci_dev(dev);
+ int retval;
+ bool wake;
+
+ retval = __igb_shutdown(pdev, &wake, 1);
+ if (retval)
+ return retval;
+
+ if (wake) {
+ pci_prepare_to_sleep(pdev);
+ } else {
+ pci_wake_from_d3(pdev, false);
+ pci_set_power_state(pdev, PCI_D3hot);
+ }
return 0;
}
+
+static int igb_runtime_resume(struct device *dev)
+{
+ return igb_resume(dev);
+}
+#endif /* CONFIG_PM_RUNTIME */
#endif
static void igb_shutdown(struct pci_dev *pdev)
{
bool wake;
- __igb_shutdown(pdev, &wake);
+ __igb_shutdown(pdev, &wake, 0);
if (system_state == SYSTEM_POWER_OFF) {
pci_wake_from_d3(pdev, wake);
--
1.7.7.5
^ permalink raw reply related [flat|nested] 11+ messages in thread* [net-next 6/8] igb: reset PHY after recovering from PHY power down
2012-01-05 6:23 [net-next v2 0/8][pull request] Intel Wired LAN Driver Updates Jeff Kirsher
` (4 preceding siblings ...)
2012-01-05 6:23 ` [net-next 5/8] igb: add basic runtime PM support Jeff Kirsher
@ 2012-01-05 6:23 ` Jeff Kirsher
2012-01-05 6:23 ` [net-next v2 7/8] netdev: FCoE: Add new ndo_get_fcoe_hbainfo() call Jeff Kirsher
` (2 subsequent siblings)
8 siblings, 0 replies; 11+ messages in thread
From: Jeff Kirsher @ 2012-01-05 6:23 UTC (permalink / raw)
To: davem; +Cc: Koki Sanagi, netdev, gospo, sassmann, Jeff Kirsher
From: Koki Sanagi <sanagi.koki@jp.fujitsu.com>
According to 82576_Datasheet.pdf, PHY setting is lost after PHY power down.
So resetting PHY is needed when recovering from PHY power down to set a default
setting to PHY register.
Owing to this lack, NIC doesn't link up in some rare situation.
Signed-off-by: Koki Sanagi <sanagi.koki@jp.fujitsu.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
drivers/net/ethernet/intel/igb/igb_main.c | 1 +
1 files changed, 1 insertions(+), 0 deletions(-)
diff --git a/drivers/net/ethernet/intel/igb/igb_main.c b/drivers/net/ethernet/intel/igb/igb_main.c
index fac71e2..01e5e89 100644
--- a/drivers/net/ethernet/intel/igb/igb_main.c
+++ b/drivers/net/ethernet/intel/igb/igb_main.c
@@ -1507,6 +1507,7 @@ void igb_power_up_link(struct igb_adapter *adapter)
igb_power_up_phy_copper(&adapter->hw);
else
igb_power_up_serdes_link_82575(&adapter->hw);
+ igb_reset_phy(&adapter->hw);
}
/**
--
1.7.7.5
^ permalink raw reply related [flat|nested] 11+ messages in thread* [net-next v2 7/8] netdev: FCoE: Add new ndo_get_fcoe_hbainfo() call
2012-01-05 6:23 [net-next v2 0/8][pull request] Intel Wired LAN Driver Updates Jeff Kirsher
` (5 preceding siblings ...)
2012-01-05 6:23 ` [net-next 6/8] igb: reset PHY after recovering from PHY power down Jeff Kirsher
@ 2012-01-05 6:23 ` Jeff Kirsher
2012-01-05 6:23 ` [net-next 8/8] ixgbe: FCoE: Add support for " Jeff Kirsher
2012-01-05 18:12 ` [net-next v2 0/8][pull request] Intel Wired LAN Driver Updates David Miller
8 siblings, 0 replies; 11+ messages in thread
From: Jeff Kirsher @ 2012-01-05 6:23 UTC (permalink / raw)
To: davem; +Cc: Neerav Parikh, netdev, gospo, sassmann, Jeff Kirsher
From: Neerav Parikh <Neerav.Parikh@intel.com>
This adds a new ndo_get_fcoe_hbainfo() call in
net_device_ops for FCoE protocol stack.
If supported by the underlying device, the FCoE protocol
stack will call this to get device specific information
from the underlying device.
This information will then be utilized by the FCoE protocol
stack to register Fiber Channel HBA attributes with the
Fiber Channel Management Service via Fabric Device
Management Interface (FDMI) as per the T11 FC-GS
specification.
Changes in v2:
- As per comments from David Miller aligning the parameters
of the ndo_get_fcoe_hbainfo()
Signed-off-by: Neerav Parikh <Neerav.Parikh@intel.com>
Tested-by: Ross Brattain <ross.b.brattain@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
include/linux/netdevice.h | 26 ++++++++++++++++++++++++++
1 files changed, 26 insertions(+), 0 deletions(-)
diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h
index a776a67..a1d1095 100644
--- a/include/linux/netdevice.h
+++ b/include/linux/netdevice.h
@@ -707,6 +707,23 @@ struct netdev_tc_txq {
u16 offset;
};
+#if defined(CONFIG_FCOE) || defined(CONFIG_FCOE_MODULE)
+/*
+ * This structure is to hold information about the device
+ * configured to run FCoE protocol stack.
+ */
+struct netdev_fcoe_hbainfo {
+ char manufacturer[64];
+ char serial_number[64];
+ char hardware_version[64];
+ char driver_version[64];
+ char optionrom_version[64];
+ char firmware_version[64];
+ char model[256];
+ char model_description[256];
+};
+#endif
+
/*
* This structure defines the management hooks for network devices.
* The following hooks can be defined; unless noted otherwise, they are
@@ -847,6 +864,13 @@ struct netdev_tc_txq {
* perform necessary setup and returns 1 to indicate the device is set up
* successfully to perform DDP on this I/O, otherwise this returns 0.
*
+ * int (*ndo_fcoe_get_hbainfo)(struct net_device *dev,
+ * struct netdev_fcoe_hbainfo *hbainfo);
+ * Called when the FCoE Protocol stack wants information on the underlying
+ * device. This information is utilized by the FCoE protocol stack to
+ * register attributes with Fiber Channel management service as per the
+ * FC-GS Fabric Device Management Information(FDMI) specification.
+ *
* int (*ndo_fcoe_get_wwn)(struct net_device *dev, u64 *wwn, int type);
* Called when the underlying device wants to override default World Wide
* Name (WWN) generation mechanism in FCoE protocol stack to pass its own
@@ -950,6 +974,8 @@ struct net_device_ops {
u16 xid,
struct scatterlist *sgl,
unsigned int sgc);
+ int (*ndo_fcoe_get_hbainfo)(struct net_device *dev,
+ struct netdev_fcoe_hbainfo *hbainfo);
#endif
#if IS_ENABLED(CONFIG_LIBFCOE)
--
1.7.7.5
^ permalink raw reply related [flat|nested] 11+ messages in thread* [net-next 8/8] ixgbe: FCoE: Add support for ndo_get_fcoe_hbainfo() call
2012-01-05 6:23 [net-next v2 0/8][pull request] Intel Wired LAN Driver Updates Jeff Kirsher
` (6 preceding siblings ...)
2012-01-05 6:23 ` [net-next v2 7/8] netdev: FCoE: Add new ndo_get_fcoe_hbainfo() call Jeff Kirsher
@ 2012-01-05 6:23 ` Jeff Kirsher
2012-01-05 18:12 ` [net-next v2 0/8][pull request] Intel Wired LAN Driver Updates David Miller
8 siblings, 0 replies; 11+ messages in thread
From: Jeff Kirsher @ 2012-01-05 6:23 UTC (permalink / raw)
To: davem; +Cc: Neerav Parikh, netdev, gospo, sassmann, Jeff Kirsher
From: Neerav Parikh <Neerav.Parikh@intel.com>
This patch implements support for ndo_get_fcoe_hbainfo()
call in the ixgbe driver.
This function will be called by the FCoE protocol stack to
obtain device specific information from the underlying
device configured to do FCoE.
Signed-off-by: Neerav Parikh <Neerav.Parikh@intel.com>
Tested-by: Ross Brattain <ross.b.brattain@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
drivers/net/ethernet/intel/ixgbe/ixgbe.h | 3 +
drivers/net/ethernet/intel/ixgbe/ixgbe_fcoe.c | 83 +++++++++++++++++++++++++
drivers/net/ethernet/intel/ixgbe/ixgbe_main.c | 5 +-
3 files changed, 90 insertions(+), 1 deletions(-)
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe.h b/drivers/net/ethernet/intel/ixgbe/ixgbe.h
index a8368d5..258164d 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe.h
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe.h
@@ -560,6 +560,7 @@ extern int ixgbe_copy_dcb_cfg(struct ixgbe_dcb_config *src_dcb_cfg,
extern char ixgbe_driver_name[];
extern const char ixgbe_driver_version[];
+extern char ixgbe_default_device_descr[];
extern void ixgbe_up(struct ixgbe_adapter *adapter);
extern void ixgbe_down(struct ixgbe_adapter *adapter);
@@ -627,6 +628,8 @@ extern u8 ixgbe_fcoe_getapp(struct ixgbe_adapter *adapter);
extern u8 ixgbe_fcoe_setapp(struct ixgbe_adapter *adapter, u8 up);
#endif /* CONFIG_IXGBE_DCB */
extern int ixgbe_fcoe_get_wwn(struct net_device *netdev, u64 *wwn, int type);
+extern int ixgbe_fcoe_get_hbainfo(struct net_device *netdev,
+ struct netdev_fcoe_hbainfo *info);
#endif /* IXGBE_FCOE */
#endif /* _IXGBE_H_ */
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_fcoe.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_fcoe.c
index df3b1be..d18d615 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_fcoe.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_fcoe.c
@@ -855,3 +855,86 @@ int ixgbe_fcoe_get_wwn(struct net_device *netdev, u64 *wwn, int type)
}
return rc;
}
+
+/**
+ * ixgbe_fcoe_get_hbainfo - get FCoE HBA information
+ * @netdev : ixgbe adapter
+ * @info : HBA information
+ *
+ * Returns ixgbe HBA information
+ *
+ * Returns : 0 on success
+ */
+int ixgbe_fcoe_get_hbainfo(struct net_device *netdev,
+ struct netdev_fcoe_hbainfo *info)
+{
+ struct ixgbe_adapter *adapter = netdev_priv(netdev);
+ struct ixgbe_hw *hw = &adapter->hw;
+ int i, pos;
+ u8 buf[8];
+
+ if (!info)
+ return -EINVAL;
+
+ /* Don't return information on unsupported devices */
+ if (hw->mac.type != ixgbe_mac_82599EB &&
+ hw->mac.type != ixgbe_mac_X540)
+ return -EINVAL;
+
+ /* Manufacturer */
+ snprintf(info->manufacturer, sizeof(info->manufacturer),
+ "Intel Corporation");
+
+ /* Serial Number */
+
+ /* Get the PCI-e Device Serial Number Capability */
+ pos = pci_find_ext_capability(adapter->pdev, PCI_EXT_CAP_ID_DSN);
+ if (pos) {
+ pos += 4;
+ for (i = 0; i < 8; i++)
+ pci_read_config_byte(adapter->pdev, pos + i, &buf[i]);
+
+ snprintf(info->serial_number, sizeof(info->serial_number),
+ "%02X%02X%02X%02X%02X%02X%02X%02X",
+ buf[7], buf[6], buf[5], buf[4],
+ buf[3], buf[2], buf[1], buf[0]);
+ } else
+ snprintf(info->serial_number, sizeof(info->serial_number),
+ "Unknown");
+
+ /* Hardware Version */
+ snprintf(info->hardware_version,
+ sizeof(info->hardware_version),
+ "Rev %d", hw->revision_id);
+ /* Driver Name/Version */
+ snprintf(info->driver_version,
+ sizeof(info->driver_version),
+ "%s v%s",
+ ixgbe_driver_name,
+ ixgbe_driver_version);
+ /* Firmware Version */
+ snprintf(info->firmware_version,
+ sizeof(info->firmware_version),
+ "0x%08x",
+ (adapter->eeprom_verh << 16) |
+ adapter->eeprom_verl);
+
+ /* Model */
+ if (hw->mac.type == ixgbe_mac_82599EB) {
+ snprintf(info->model,
+ sizeof(info->model),
+ "Intel 82599");
+ } else {
+ snprintf(info->model,
+ sizeof(info->model),
+ "Intel X540");
+ }
+
+ /* Model Description */
+ snprintf(info->model_description,
+ sizeof(info->model_description),
+ "%s",
+ ixgbe_default_device_descr);
+
+ return 0;
+}
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
index 74669a8..1ee5d0f 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
@@ -55,6 +55,8 @@
char ixgbe_driver_name[] = "ixgbe";
static const char ixgbe_driver_string[] =
"Intel(R) 10 Gigabit PCI Express Network Driver";
+char ixgbe_default_device_descr[] =
+ "Intel(R) 10 Gigabit Network Connection";
#define MAJ 3
#define MIN 6
#define BUILD 7
@@ -7293,6 +7295,7 @@ static const struct net_device_ops ixgbe_netdev_ops = {
.ndo_fcoe_enable = ixgbe_fcoe_enable,
.ndo_fcoe_disable = ixgbe_fcoe_disable,
.ndo_fcoe_get_wwn = ixgbe_fcoe_get_wwn,
+ .ndo_fcoe_get_hbainfo = ixgbe_fcoe_get_hbainfo,
#endif /* IXGBE_FCOE */
.ndo_set_features = ixgbe_set_features,
.ndo_fix_features = ixgbe_fix_features,
@@ -7722,7 +7725,7 @@ static int __devinit ixgbe_probe(struct pci_dev *pdev,
/* add san mac addr to netdev */
ixgbe_add_sanmac_netdev(netdev);
- e_dev_info("Intel(R) 10 Gigabit Network Connection\n");
+ e_dev_info("%s\n", ixgbe_default_device_descr);
cards_found++;
return 0;
--
1.7.7.5
^ permalink raw reply related [flat|nested] 11+ messages in thread* Re: [net-next v2 0/8][pull request] Intel Wired LAN Driver Updates
2012-01-05 6:23 [net-next v2 0/8][pull request] Intel Wired LAN Driver Updates Jeff Kirsher
` (7 preceding siblings ...)
2012-01-05 6:23 ` [net-next 8/8] ixgbe: FCoE: Add support for " Jeff Kirsher
@ 2012-01-05 18:12 ` David Miller
8 siblings, 0 replies; 11+ messages in thread
From: David Miller @ 2012-01-05 18:12 UTC (permalink / raw)
To: jeffrey.t.kirsher; +Cc: netdev, gospo, sassmann
From: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Date: Wed, 4 Jan 2012 22:23:32 -0800
> The following series contains updates to e1000, igb and
> netdev/ixgbe. There are 2 fixes and the remaining patches are
> either add support or cleanup.
>
> Here is a list of the new support added:
> - igb adds support for byte queue limits and basic runtime PM
> - FCoE adds ndo_get_fcoe_hbainfo() call
>
> v2- Dropped e1000e patches while Bruce works on the suggested changes and
> added 2 e1000 patches from Florian.
>
> The following are changes since commit 117ff42fd43e92d24c6aa6f3e4f0f1e1edada140:
> Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
> and are available in the git repository at:
> git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net-next master
Pulled, thanks Jeff.
^ permalink raw reply [flat|nested] 11+ messages in thread