[net-next 0/4][pull request] Intel Wired LAN Driver Updates

[net-next 0/4][pull request] Intel Wired LAN Driver Updates

[Jeff Kirsher]

This series of patches contains fixes e100 and DCB (ixgbe, bnx2x).

The following are changes since commit b4017c5368f992fb8fb3a2545a0977082c6664e4:
  Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
and are available in the git repository at:
  git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net-next master

Ben Greear (2):
  e100: Fix rx-over-length statistics.
  e100: Show short v/s long rx length errors in ethtool stats.

John Fastabend (2):
  ixgbe: dcb: check setup_tc return codes
  net: dcb: getnumtcs()/setnumtcs() should return an int

 drivers/net/ethernet/broadcom/bnx2x/bnx2x_dcb.c |    4 +-
 drivers/net/ethernet/intel/e100.c               |    8 +++++-
 drivers/net/ethernet/intel/ixgbe/ixgbe_dcb_nl.c |   30 +++++++++++++++-------
 include/net/dcbnl.h                             |    4 +-
 4 files changed, 31 insertions(+), 15 deletions(-)

-- 
1.7.7.6

[net-next 1/4] e100: Fix rx-over-length statistics.

[Jeff Kirsher]

From: Ben Greear <greearb@candelatech.com>

The old code would += the total errors every time
stats were gathered.  Instead, keep a count of short-pkt
and long-pkt counters and then simply add them together
for the rx-over-length stat.

Signed-off-by: Ben Greear <greearb@candelatech.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/e100.c |    5 ++++-
 1 files changed, 4 insertions(+), 1 deletions(-)

diff --git a/drivers/net/ethernet/intel/e100.c b/drivers/net/ethernet/intel/e100.c
index 4d8a616..d2b7872 100644
--- a/drivers/net/ethernet/intel/e100.c
+++ b/drivers/net/ethernet/intel/e100.c
@@ -622,6 +622,7 @@ struct nic {
 	u32 rx_fc_pause;
 	u32 rx_fc_unsupported;
 	u32 rx_tco_frames;
+	u32 rx_short_frame_errors;
 	u32 rx_over_length_errors;
 
 	u16 eeprom_wc;
@@ -1622,7 +1623,9 @@ static void e100_update_stats(struct nic *nic)
 		ns->collisions += nic->tx_collisions;
 		ns->tx_errors += le32_to_cpu(s->tx_max_collisions) +
 			le32_to_cpu(s->tx_lost_crs);
-		ns->rx_length_errors += le32_to_cpu(s->rx_short_frame_errors) +
+		nic->rx_short_frame_errors +=
+			le32_to_cpu(s->rx_short_frame_errors);
+		ns->rx_length_errors = nic->rx_short_frame_errors +
 			nic->rx_over_length_errors;
 		ns->rx_crc_errors += le32_to_cpu(s->rx_crc_errors);
 		ns->rx_frame_errors += le32_to_cpu(s->rx_alignment_errors);
-- 
1.7.7.6

[net-next 01/10] e100: Support RXFCS feature flag.

[Jeff Kirsher]

From: Ben Greear <greearb@candelatech.com>

This allows e100 to be configured to append the
Ethernet FCS to the skb.

Useful for sniffing networks.

Signed-off-by: Ben Greear <greearb@candelatech.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/e100.c |   35 ++++++++++++++++++++++++++++++-----
 1 files changed, 30 insertions(+), 5 deletions(-)

diff --git a/drivers/net/ethernet/intel/e100.c b/drivers/net/ethernet/intel/e100.c
index 485ab8c..3ecbded 100644
--- a/drivers/net/ethernet/intel/e100.c
+++ b/drivers/net/ethernet/intel/e100.c
@@ -1075,7 +1075,7 @@ static void e100_get_defaults(struct nic *nic)
 	/* Template for a freshly allocated RFD */
 	nic->blank_rfd.command = 0;
 	nic->blank_rfd.rbd = cpu_to_le32(0xFFFFFFFF);
-	nic->blank_rfd.size = cpu_to_le16(VLAN_ETH_FRAME_LEN);
+	nic->blank_rfd.size = cpu_to_le16(VLAN_ETH_FRAME_LEN + ETH_FCS_LEN);
 
 	/* MII setup */
 	nic->mii.phy_id_mask = 0x1F;
@@ -1089,6 +1089,7 @@ static void e100_configure(struct nic *nic, struct cb *cb, struct sk_buff *skb)
 {
 	struct config *config = &cb->u.config;
 	u8 *c = (u8 *)config;
+	struct net_device *netdev = nic->netdev;
 
 	cb->command = cpu_to_le16(cb_config);
 
@@ -1132,6 +1133,9 @@ static void e100_configure(struct nic *nic, struct cb *cb, struct sk_buff *skb)
 		config->promiscuous_mode = 0x1;		/* 1=on, 0=off */
 	}
 
+	if (unlikely(netdev->features & NETIF_F_RXFCS))
+		config->rx_crc_transfer = 0x1;	/* 1=save, 0=discard */
+
 	if (nic->flags & multicast_all)
 		config->multicast_all = 0x1;		/* 1=accept, 0=no */
 
@@ -1881,7 +1885,7 @@ static inline void e100_start_receiver(struct nic *nic, struct rx *rx)
 	}
 }
 
-#define RFD_BUF_LEN (sizeof(struct rfd) + VLAN_ETH_FRAME_LEN)
+#define RFD_BUF_LEN (sizeof(struct rfd) + VLAN_ETH_FRAME_LEN + ETH_FCS_LEN)
 static int e100_rx_alloc_skb(struct nic *nic, struct rx *rx)
 {
 	if (!(rx->skb = netdev_alloc_skb_ip_align(nic->netdev, RFD_BUF_LEN)))
@@ -1919,6 +1923,7 @@ static int e100_rx_indicate(struct nic *nic, struct rx *rx,
 	struct sk_buff *skb = rx->skb;
 	struct rfd *rfd = (struct rfd *)skb->data;
 	u16 rfd_status, actual_size;
+	u16 fcs_pad = 0;
 
 	if (unlikely(work_done && *work_done >= work_to_do))
 		return -EAGAIN;
@@ -1951,6 +1956,8 @@ static int e100_rx_indicate(struct nic *nic, struct rx *rx,
 	}
 
 	/* Get actual data size */
+	if (unlikely(dev->features & NETIF_F_RXFCS))
+		fcs_pad = 4;
 	actual_size = le16_to_cpu(rfd->actual_size) & 0x3FFF;
 	if (unlikely(actual_size > RFD_BUF_LEN - sizeof(struct rfd)))
 		actual_size = RFD_BUF_LEN - sizeof(struct rfd);
@@ -1980,13 +1987,13 @@ static int e100_rx_indicate(struct nic *nic, struct rx *rx,
 	if (unlikely(!(rfd_status & cb_ok))) {
 		/* Don't indicate if hardware indicates errors */
 		dev_kfree_skb_any(skb);
-	} else if (actual_size > ETH_DATA_LEN + VLAN_ETH_HLEN) {
+	} else if (actual_size > ETH_DATA_LEN + VLAN_ETH_HLEN + fcs_pad) {
 		/* Don't indicate oversized frames */
 		nic->rx_over_length_errors++;
 		dev_kfree_skb_any(skb);
 	} else {
 		dev->stats.rx_packets++;
-		dev->stats.rx_bytes += actual_size;
+		dev->stats.rx_bytes += (actual_size - fcs_pad);
 		netif_receive_skb(skb);
 		if (work_done)
 			(*work_done)++;
@@ -2058,7 +2065,8 @@ static void e100_rx_clean(struct nic *nic, unsigned int *work_done,
 		pci_dma_sync_single_for_device(nic->pdev,
 			old_before_last_rx->dma_addr, sizeof(struct rfd),
 			PCI_DMA_BIDIRECTIONAL);
-		old_before_last_rfd->size = cpu_to_le16(VLAN_ETH_FRAME_LEN);
+		old_before_last_rfd->size = cpu_to_le16(VLAN_ETH_FRAME_LEN
+							+ ETH_FCS_LEN);
 		pci_dma_sync_single_for_device(nic->pdev,
 			old_before_last_rx->dma_addr, sizeof(struct rfd),
 			PCI_DMA_BIDIRECTIONAL);
@@ -2729,6 +2737,20 @@ static int e100_close(struct net_device *netdev)
 	return 0;
 }
 
+static int e100_set_features(struct net_device *netdev,
+			     netdev_features_t features)
+{
+	struct nic *nic = netdev_priv(netdev);
+	netdev_features_t changed = features ^ netdev->features;
+
+	if (!(changed & (NETIF_F_RXFCS)))
+		return 0;
+
+	netdev->features = features;
+	e100_exec_cb(nic, NULL, e100_configure);
+	return 0;
+}
+
 static const struct net_device_ops e100_netdev_ops = {
 	.ndo_open		= e100_open,
 	.ndo_stop		= e100_close,
@@ -2742,6 +2764,7 @@ static const struct net_device_ops e100_netdev_ops = {
 #ifdef CONFIG_NET_POLL_CONTROLLER
 	.ndo_poll_controller	= e100_netpoll,
 #endif
+	.ndo_set_features	= e100_set_features,
 };
 
 static int __devinit e100_probe(struct pci_dev *pdev,
@@ -2754,6 +2777,8 @@ static int __devinit e100_probe(struct pci_dev *pdev,
 	if (!(netdev = alloc_etherdev(sizeof(struct nic))))
 		return -ENOMEM;
 
+	netdev->hw_features |= NETIF_F_RXFCS;
+
 	netdev->netdev_ops = &e100_netdev_ops;
 	SET_ETHTOOL_OPS(netdev, &e100_ethtool_ops);
 	netdev->watchdog_timeo = E100_WATCHDOG_PERIOD;
-- 
1.7.7.6

[net-next 2/4] e100: Show short v/s long rx length errors in ethtool stats.

[Jeff Kirsher]

From: Ben Greear <greearb@candelatech.com>

Signed-off-by: Ben Greear <greearb@candelatech.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/e100.c |    3 +++
 1 files changed, 3 insertions(+), 0 deletions(-)

diff --git a/drivers/net/ethernet/intel/e100.c b/drivers/net/ethernet/intel/e100.c
index d2b7872..e498eff 100644
--- a/drivers/net/ethernet/intel/e100.c
+++ b/drivers/net/ethernet/intel/e100.c
@@ -2661,6 +2661,7 @@ static const char e100_gstrings_stats[][ETH_GSTRING_LEN] = {
 	"tx_deferred", "tx_single_collisions", "tx_multi_collisions",
 	"tx_flow_control_pause", "rx_flow_control_pause",
 	"rx_flow_control_unsupported", "tx_tco_packets", "rx_tco_packets",
+	"rx_short_frame_errors", "rx_over_length_errors",
 };
 #define E100_NET_STATS_LEN	21
 #define E100_STATS_LEN	ARRAY_SIZE(e100_gstrings_stats)
@@ -2694,6 +2695,8 @@ static void e100_get_ethtool_stats(struct net_device *netdev,
 	data[i++] = nic->rx_fc_unsupported;
 	data[i++] = nic->tx_tco_frames;
 	data[i++] = nic->rx_tco_frames;
+	data[i++] = nic->rx_short_frame_errors;
+	data[i++] = nic->rx_over_length_errors;
 }
 
 static void e100_get_strings(struct net_device *netdev, u32 stringset, u8 *data)
-- 
1.7.7.6

[net-next 02/10] e100: Support sending custom Ethernet CRC

[Jeff Kirsher]

From: Ben Greear <greearb@candelatech.com>

This can aid with testing the RX logic for bad
CRCs.

Signed-off-by: Ben Greear <greearb@candelatech.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/e100.c |   16 ++++++++++++++++
 1 files changed, 16 insertions(+), 0 deletions(-)

diff --git a/drivers/net/ethernet/intel/e100.c b/drivers/net/ethernet/intel/e100.c
index 3ecbded..6f9f70a 100644
--- a/drivers/net/ethernet/intel/e100.c
+++ b/drivers/net/ethernet/intel/e100.c
@@ -412,6 +412,10 @@ enum cb_status {
 	cb_ok       = 0x2000,
 };
 
+/**
+ * cb_command - Command Block flags
+ * @cb_tx_nc:  0: controler does CRC (normal),  1: CRC from skb memory
+ */
 enum cb_command {
 	cb_nop    = 0x0000,
 	cb_iaaddr = 0x0001,
@@ -421,6 +425,7 @@ enum cb_command {
 	cb_ucode  = 0x0005,
 	cb_dump   = 0x0006,
 	cb_tx_sf  = 0x0008,
+	cb_tx_nc  = 0x0010,
 	cb_cid    = 0x1f00,
 	cb_i      = 0x2000,
 	cb_s      = 0x4000,
@@ -1724,6 +1729,16 @@ static void e100_xmit_prepare(struct nic *nic, struct cb *cb,
 	struct sk_buff *skb)
 {
 	cb->command = nic->tx_command;
+
+	/*
+	 * Use the last 4 bytes of the SKB payload packet as the CRC, used for
+	 * testing, ie sending frames with bad CRC.
+	 */
+	if (unlikely(skb->no_fcs))
+		cb->command |= __constant_cpu_to_le16(cb_tx_nc);
+	else
+		cb->command &= ~__constant_cpu_to_le16(cb_tx_nc);
+
 	/* interrupt every 16 packets regardless of delay */
 	if ((nic->cbs_avail & ~15) == nic->cbs_avail)
 		cb->command |= cpu_to_le16(cb_i);
@@ -2778,6 +2793,7 @@ static int __devinit e100_probe(struct pci_dev *pdev,
 		return -ENOMEM;
 
 	netdev->hw_features |= NETIF_F_RXFCS;
+	netdev->priv_flags |= IFF_SUPP_NOFCS;
 
 	netdev->netdev_ops = &e100_netdev_ops;
 	SET_ETHTOOL_OPS(netdev, &e100_ethtool_ops);
-- 
1.7.7.6

[net-next 03/10] e100: Support RXALL feature flag.

[Jeff Kirsher]

From: Ben Greear <greearb@candelatech.com>

This allows the NIC to receive packets with bad FCS
and other errors.  Good for sniffing packets on flakey
networks.

v4:  Only flax rx-over-length errors if pkt is beyond
   maximum expected packet size, not just beyond the MTU.
   This matches the existing logic for this counter.

Signed-off-by: Ben Greear <greearb@candelatech.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/e100.c |   22 ++++++++++++++++++++--
 1 files changed, 20 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/intel/e100.c b/drivers/net/ethernet/intel/e100.c
index 6f9f70a..4d8a616 100644
--- a/drivers/net/ethernet/intel/e100.c
+++ b/drivers/net/ethernet/intel/e100.c
@@ -462,7 +462,7 @@ struct config {
 /*5*/	u8 X(tx_dma_max_count:7, dma_max_count_enable:1);
 /*6*/	u8 X(X(X(X(X(X(X(late_scb_update:1, direct_rx_dma:1),
 	   tno_intr:1), cna_intr:1), standard_tcb:1), standard_stat_counter:1),
-	   rx_discard_overruns:1), rx_save_bad_frames:1);
+	   rx_save_overruns : 1), rx_save_bad_frames : 1);
 /*7*/	u8 X(X(X(X(X(rx_discard_short_frames:1, tx_underrun_retry:2),
 	   pad7:2), rx_extended_rfd:1), tx_two_frames_in_fifo:1),
 	   tx_dynamic_tbd:1);
@@ -1165,6 +1165,12 @@ static void e100_configure(struct nic *nic, struct cb *cb, struct sk_buff *skb)
 		}
 	}
 
+	if (netdev->features & NETIF_F_RXALL) {
+		config->rx_save_overruns = 0x1; /* 1=save, 0=discard */
+		config->rx_save_bad_frames = 0x1;       /* 1=save, 0=discard */
+		config->rx_discard_short_frames = 0x0;  /* 1=discard, 0=save */
+	}
+
 	netif_printk(nic, hw, KERN_DEBUG, nic->netdev,
 		     "[00-07]=%02X:%02X:%02X:%02X:%02X:%02X:%02X:%02X\n",
 		     c[0], c[1], c[2], c[3], c[4], c[5], c[6], c[7]);
@@ -1999,6 +2005,16 @@ static int e100_rx_indicate(struct nic *nic, struct rx *rx,
 	skb_put(skb, actual_size);
 	skb->protocol = eth_type_trans(skb, nic->netdev);
 
+	/* If we are receiving all frames, then don't bother
+	 * checking for errors.
+	 */
+	if (unlikely(dev->features & NETIF_F_RXALL)) {
+		if (actual_size > ETH_DATA_LEN + VLAN_ETH_HLEN + fcs_pad)
+			/* Received oversized frame, but keep it. */
+			nic->rx_over_length_errors++;
+		goto process_skb;
+	}
+
 	if (unlikely(!(rfd_status & cb_ok))) {
 		/* Don't indicate if hardware indicates errors */
 		dev_kfree_skb_any(skb);
@@ -2007,6 +2023,7 @@ static int e100_rx_indicate(struct nic *nic, struct rx *rx,
 		nic->rx_over_length_errors++;
 		dev_kfree_skb_any(skb);
 	} else {
+process_skb:
 		dev->stats.rx_packets++;
 		dev->stats.rx_bytes += (actual_size - fcs_pad);
 		netif_receive_skb(skb);
@@ -2758,7 +2775,7 @@ static int e100_set_features(struct net_device *netdev,
 	struct nic *nic = netdev_priv(netdev);
 	netdev_features_t changed = features ^ netdev->features;
 
-	if (!(changed & (NETIF_F_RXFCS)))
+	if (!(changed & (NETIF_F_RXFCS | NETIF_F_RXALL)))
 		return 0;
 
 	netdev->features = features;
@@ -2794,6 +2811,7 @@ static int __devinit e100_probe(struct pci_dev *pdev,
 
 	netdev->hw_features |= NETIF_F_RXFCS;
 	netdev->priv_flags |= IFF_SUPP_NOFCS;
+	netdev->hw_features |= NETIF_F_RXALL;
 
 	netdev->netdev_ops = &e100_netdev_ops;
 	SET_ETHTOOL_OPS(netdev, &e100_ethtool_ops);
-- 
1.7.7.6

[net-next 3/4] ixgbe: dcb: check setup_tc return codes

[Jeff Kirsher]

From: John Fastabend <john.r.fastabend@intel.com>

dcb netlink code calls setup_tc to init hardware traffic classes
to use for DCB. At some call sites the return values are not
checked for errors and in one case may return -EINVAL back to
the net/dcbnl.c caller which is expecting a u8.

This fixes some smatch hits and although failures are never
seen in practive its best to check return codes.

Reported-by: Dan Carenter <dan.carpenter@oracle.com>
Signed-off-by: John Fastabend <john.r.fastabend@intel.com>
Tested-by: Ross Brattain <ross.b.brattain@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/ixgbe/ixgbe_dcb_nl.c |   26 +++++++++++++++-------
 1 files changed, 18 insertions(+), 8 deletions(-)

diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_dcb_nl.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_dcb_nl.c
index 79a92fe..95e5d11 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_dcb_nl.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_dcb_nl.c
@@ -111,7 +111,7 @@ static u8 ixgbe_dcbnl_get_state(struct net_device *netdev)
 
 static u8 ixgbe_dcbnl_set_state(struct net_device *netdev, u8 state)
 {
-	u8 err = 0;
+	int err = 0;
 	u8 prio_tc[MAX_USER_PRIORITY] = {0};
 	int i;
 	struct ixgbe_adapter *adapter = netdev_priv(netdev);
@@ -122,7 +122,7 @@ static u8 ixgbe_dcbnl_set_state(struct net_device *netdev, u8 state)
 
 	/* verify there is something to do, if not then exit */
 	if (!!state != !(adapter->flags & IXGBE_FLAG_DCB_ENABLED))
-		return err;
+		goto out;
 
 	if (state > 0) {
 		err = ixgbe_setup_tc(netdev, adapter->dcb_cfg.num_tcs.pg_tcs);
@@ -131,10 +131,14 @@ static u8 ixgbe_dcbnl_set_state(struct net_device *netdev, u8 state)
 		err = ixgbe_setup_tc(netdev, 0);
 	}
 
+	if (err)
+		goto out;
+
 	for (i = 0; i < IEEE_8021QAZ_MAX_TCS; i++)
 		netdev_set_prio_tc_map(netdev, i, prio_tc[i]);
 
-	return err;
+out:
+	return err ? 1 : 0;
 }
 
 static void ixgbe_dcbnl_get_perm_hw_addr(struct net_device *netdev,
@@ -581,7 +585,7 @@ static int ixgbe_dcbnl_ieee_setets(struct net_device *dev,
 {
 	struct ixgbe_adapter *adapter = netdev_priv(dev);
 	int max_frame = dev->mtu + ETH_HLEN + ETH_FCS_LEN;
-	int i;
+	int i, err = 0;
 	__u8 max_tc = 0;
 
 	if (!(adapter->dcbx_cap & DCB_CAP_DCBX_VER_IEEE))
@@ -608,12 +612,17 @@ static int ixgbe_dcbnl_ieee_setets(struct net_device *dev,
 		return -EINVAL;
 
 	if (max_tc != netdev_get_num_tc(dev))
-		ixgbe_setup_tc(dev, max_tc);
+		err = ixgbe_setup_tc(dev, max_tc);
+
+	if (err)
+		goto err_out;
 
 	for (i = 0; i < IEEE_8021QAZ_MAX_TCS; i++)
 		netdev_set_prio_tc_map(dev, i, ets->prio_tc[i]);
 
-	return ixgbe_dcb_hw_ets(&adapter->hw, ets, max_frame);
+	err = ixgbe_dcb_hw_ets(&adapter->hw, ets, max_frame);
+err_out:
+	return err;
 }
 
 static int ixgbe_dcbnl_ieee_getpfc(struct net_device *dev,
@@ -726,6 +735,7 @@ static u8 ixgbe_dcbnl_setdcbx(struct net_device *dev, u8 mode)
 	struct ixgbe_adapter *adapter = netdev_priv(dev);
 	struct ieee_ets ets = {0};
 	struct ieee_pfc pfc = {0};
+	int err = 0;
 
 	/* no support for LLD_MANAGED modes or CEE+IEEE */
 	if ((mode & DCB_CAP_DCBX_LLD_MANAGED) ||
@@ -756,10 +766,10 @@ static u8 ixgbe_dcbnl_setdcbx(struct net_device *dev, u8 mode)
 		 */
 		ixgbe_dcbnl_ieee_setets(dev, &ets);
 		ixgbe_dcbnl_ieee_setpfc(dev, &pfc);
-		ixgbe_setup_tc(dev, 0);
+		err = ixgbe_setup_tc(dev, 0);
 	}
 
-	return 0;
+	return err ? 1 : 0;
 }
 
 const struct dcbnl_rtnl_ops dcbnl_ops = {
-- 
1.7.7.6

[net-next 04/10] e1000e: cleanup incorrect filename in comment

[Jeff Kirsher]

From: Bruce Allan <bruce.w.allan@intel.com>

Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/e1000e/netdev.c |    2 +-
 1 files changed, 1 insertions(+), 1 deletions(-)

diff --git a/drivers/net/ethernet/intel/e1000e/netdev.c b/drivers/net/ethernet/intel/e1000e/netdev.c
index 8b62870..efb3729 100644
--- a/drivers/net/ethernet/intel/e1000e/netdev.c
+++ b/drivers/net/ethernet/intel/e1000e/netdev.c
@@ -6628,4 +6628,4 @@ MODULE_DESCRIPTION("Intel(R) PRO/1000 Network Driver");
 MODULE_LICENSE("GPL");
 MODULE_VERSION(DRV_VERSION);
 
-/* e1000_main.c */
+/* netdev.c */
-- 
1.7.7.6

[net-next 4/4] net: dcb: getnumtcs()/setnumtcs() should return an int

[Jeff Kirsher]

From: John Fastabend <john.r.fastabend@intel.com>

{g|s}etnumtcs() today returns a u8 that is only used by the DCB code
to verify no error occurred. Today the driver implementations return
negative error codes which end up being non-zero so the logic works
out but triggers some sparse warnings.

To fix the sparse warnings convert the return value to an int.

CC: Eilon Greenstein <eilong@broadcom.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: John Fastabend <john.r.fastabend@intel.com>
Tested-by: Ross Brattain <ross.b.brattain@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/broadcom/bnx2x/bnx2x_dcb.c |    4 ++--
 drivers/net/ethernet/intel/ixgbe/ixgbe_dcb_nl.c |    4 ++--
 include/net/dcbnl.h                             |    4 ++--
 3 files changed, 6 insertions(+), 6 deletions(-)

diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_dcb.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_dcb.c
index 9a9bd3a..9a4ed05 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_dcb.c
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_dcb.c
@@ -2142,7 +2142,7 @@ static u8 bnx2x_dcbnl_get_cap(struct net_device *netdev, int capid, u8 *cap)
 	return rval;
 }
 
-static u8 bnx2x_dcbnl_get_numtcs(struct net_device *netdev, int tcid, u8 *num)
+static int bnx2x_dcbnl_get_numtcs(struct net_device *netdev, int tcid, u8 *num)
 {
 	struct bnx2x *bp = netdev_priv(netdev);
 	u8 rval = 0;
@@ -2169,7 +2169,7 @@ static u8 bnx2x_dcbnl_get_numtcs(struct net_device *netdev, int tcid, u8 *num)
 	return rval;
 }
 
-static u8 bnx2x_dcbnl_set_numtcs(struct net_device *netdev, int tcid, u8 num)
+static int bnx2x_dcbnl_set_numtcs(struct net_device *netdev, int tcid, u8 num)
 {
 	struct bnx2x *bp = netdev_priv(netdev);
 	DP(NETIF_MSG_LINK, "num tcs = %d; Not supported\n", num);
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_dcb_nl.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_dcb_nl.c
index 95e5d11..dde65f9 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_dcb_nl.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_dcb_nl.c
@@ -490,7 +490,7 @@ static u8 ixgbe_dcbnl_getcap(struct net_device *netdev, int capid, u8 *cap)
 	return 0;
 }
 
-static u8 ixgbe_dcbnl_getnumtcs(struct net_device *netdev, int tcid, u8 *num)
+static int ixgbe_dcbnl_getnumtcs(struct net_device *netdev, int tcid, u8 *num)
 {
 	struct ixgbe_adapter *adapter = netdev_priv(netdev);
 	u8 rval = 0;
@@ -514,7 +514,7 @@ static u8 ixgbe_dcbnl_getnumtcs(struct net_device *netdev, int tcid, u8 *num)
 	return rval;
 }
 
-static u8 ixgbe_dcbnl_setnumtcs(struct net_device *netdev, int tcid, u8 num)
+static int ixgbe_dcbnl_setnumtcs(struct net_device *netdev, int tcid, u8 num)
 {
 	return -EINVAL;
 }
diff --git a/include/net/dcbnl.h b/include/net/dcbnl.h
index 2cd66d0..f55c980 100644
--- a/include/net/dcbnl.h
+++ b/include/net/dcbnl.h
@@ -72,8 +72,8 @@ struct dcbnl_rtnl_ops {
 	void (*getpfccfg)(struct net_device *, int, u8 *);
 	u8   (*setall)(struct net_device *);
 	u8   (*getcap)(struct net_device *, int, u8 *);
-	u8   (*getnumtcs)(struct net_device *, int, u8 *);
-	u8   (*setnumtcs)(struct net_device *, int, u8);
+	int  (*getnumtcs)(struct net_device *, int, u8 *);
+	int  (*setnumtcs)(struct net_device *, int, u8);
 	u8   (*getpfcstate)(struct net_device *);
 	void (*setpfcstate)(struct net_device *, u8);
 	void (*getbcncfg)(struct net_device *, int, u32 *);
-- 
1.7.7.6

[net-next 05/10] e1000e: cleanup whitespace and indentation

[Jeff Kirsher]

From: Bruce Allan <bruce.w.allan@intel.com>

Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/e1000e/82571.c   |   14 +++----
 drivers/net/ethernet/intel/e1000e/ich8lan.c |   10 ++---
 drivers/net/ethernet/intel/e1000e/mac.c     |    2 +-
 drivers/net/ethernet/intel/e1000e/netdev.c  |   10 ++--
 drivers/net/ethernet/intel/e1000e/phy.c     |   59 ++++++++++-----------------
 5 files changed, 38 insertions(+), 57 deletions(-)

diff --git a/drivers/net/ethernet/intel/e1000e/82571.c b/drivers/net/ethernet/intel/e1000e/82571.c
index 086dad7..b3fdc69 100644
--- a/drivers/net/ethernet/intel/e1000e/82571.c
+++ b/drivers/net/ethernet/intel/e1000e/82571.c
@@ -1269,18 +1269,16 @@ static void e1000_initialize_hw_bits_82571(struct e1000_hw *hw)
 		reg |= E1000_PBA_ECC_CORR_EN;
 		ew32(PBA_ECC, reg);
 	}
+
 	/*
 	 * Workaround for hardware errata.
 	 * Ensure that DMA Dynamic Clock gating is disabled on 82571 and 82572
 	 */
-
-        if ((hw->mac.type == e1000_82571) ||
-           (hw->mac.type == e1000_82572)) {
-                reg = er32(CTRL_EXT);
-                reg &= ~E1000_CTRL_EXT_DMA_DYN_CLK_EN;
-                ew32(CTRL_EXT, reg);
-        }
-
+	if ((hw->mac.type == e1000_82571) || (hw->mac.type == e1000_82572)) {
+		reg = er32(CTRL_EXT);
+		reg &= ~E1000_CTRL_EXT_DMA_DYN_CLK_EN;
+		ew32(CTRL_EXT, reg);
+	}
 
 	/* PCI-Ex Control Registers */
 	switch (hw->mac.type) {
diff --git a/drivers/net/ethernet/intel/e1000e/ich8lan.c b/drivers/net/ethernet/intel/e1000e/ich8lan.c
index 8e9af62..64c7644 100644
--- a/drivers/net/ethernet/intel/e1000e/ich8lan.c
+++ b/drivers/net/ethernet/intel/e1000e/ich8lan.c
@@ -1230,9 +1230,8 @@ s32 e1000_configure_k1_ich8lan(struct e1000_hw *hw, bool k1_enable)
 	u32 reg = 0;
 	u16 kmrn_reg = 0;
 
-	ret_val = e1000e_read_kmrn_reg_locked(hw,
-	                                     E1000_KMRNCTRLSTA_K1_CONFIG,
-	                                     &kmrn_reg);
+	ret_val = e1000e_read_kmrn_reg_locked(hw, E1000_KMRNCTRLSTA_K1_CONFIG,
+					      &kmrn_reg);
 	if (ret_val)
 		return ret_val;
 
@@ -1241,9 +1240,8 @@ s32 e1000_configure_k1_ich8lan(struct e1000_hw *hw, bool k1_enable)
 	else
 		kmrn_reg &= ~E1000_KMRNCTRLSTA_K1_ENABLE;
 
-	ret_val = e1000e_write_kmrn_reg_locked(hw,
-	                                      E1000_KMRNCTRLSTA_K1_CONFIG,
-	                                      kmrn_reg);
+	ret_val = e1000e_write_kmrn_reg_locked(hw, E1000_KMRNCTRLSTA_K1_CONFIG,
+					       kmrn_reg);
 	if (ret_val)
 		return ret_val;
 
diff --git a/drivers/net/ethernet/intel/e1000e/mac.c b/drivers/net/ethernet/intel/e1000e/mac.c
index 59ac9f6..decad98 100644
--- a/drivers/net/ethernet/intel/e1000e/mac.c
+++ b/drivers/net/ethernet/intel/e1000e/mac.c
@@ -629,7 +629,7 @@ s32 e1000e_check_for_serdes_link(struct e1000_hw *hw)
 	if (E1000_TXCW_ANE & er32(TXCW)) {
 		status = er32(STATUS);
 		if (status & E1000_STATUS_LU) {
-			/* SYNCH bit and IV bit are sticky, so reread rxcw.  */
+			/* SYNCH bit and IV bit are sticky, so reread rxcw. */
 			udelay(10);
 			rxcw = er32(RXCW);
 			if (rxcw & E1000_RXCW_SYNCH) {
diff --git a/drivers/net/ethernet/intel/e1000e/netdev.c b/drivers/net/ethernet/intel/e1000e/netdev.c
index efb3729..a9a4ea2 100644
--- a/drivers/net/ethernet/intel/e1000e/netdev.c
+++ b/drivers/net/ethernet/intel/e1000e/netdev.c
@@ -3262,6 +3262,7 @@ static void e1000e_set_rx_mode(struct net_device *netdev)
 		e1000e_vlan_filter_disable(adapter);
 	} else {
 		int count;
+
 		if (netdev->flags & IFF_ALLMULTI) {
 			rctl |= E1000_RCTL_MPE;
 		} else {
@@ -6103,7 +6104,6 @@ static int __devinit e1000_probe(struct pci_dev *pdev,
 	const struct e1000_info *ei = e1000_info_tbl[ent->driver_data];
 	resource_size_t mmio_start, mmio_len;
 	resource_size_t flash_start, flash_len;
-
 	static int cards_found;
 	u16 aspm_disable_flag = 0;
 	int i, err, pci_using_dac;
@@ -6347,11 +6347,11 @@ static int __devinit e1000_probe(struct pci_dev *pdev,
 	} else if (adapter->flags & FLAG_APME_IN_CTRL3) {
 		if (adapter->flags & FLAG_APME_CHECK_PORT_B &&
 		    (adapter->hw.bus.func == 1))
-			e1000_read_nvm(&adapter->hw,
-				NVM_INIT_CONTROL3_PORT_B, 1, &eeprom_data);
+			e1000_read_nvm(&adapter->hw, NVM_INIT_CONTROL3_PORT_B,
+				       1, &eeprom_data);
 		else
-			e1000_read_nvm(&adapter->hw,
-				NVM_INIT_CONTROL3_PORT_A, 1, &eeprom_data);
+			e1000_read_nvm(&adapter->hw, NVM_INIT_CONTROL3_PORT_A,
+				       1, &eeprom_data);
 	}
 
 	/* fetch WoL from EEPROM */
diff --git a/drivers/net/ethernet/intel/e1000e/phy.c b/drivers/net/ethernet/intel/e1000e/phy.c
index 683abac..6e768b1 100644
--- a/drivers/net/ethernet/intel/e1000e/phy.c
+++ b/drivers/net/ethernet/intel/e1000e/phy.c
@@ -1007,12 +1007,12 @@ static s32 e1000_phy_setup_autoneg(struct e1000_hw *hw)
 	 * The possible values of the "fc" parameter are:
 	 *      0:  Flow control is completely disabled
 	 *      1:  Rx flow control is enabled (we can receive pause frames
-	 *	  but not send pause frames).
+	 *          but not send pause frames).
 	 *      2:  Tx flow control is enabled (we can send pause frames
-	 *	  but we do not support receiving pause frames).
+	 *          but we do not support receiving pause frames).
 	 *      3:  Both Rx and Tx flow control (symmetric) are enabled.
 	 *  other:  No software override.  The flow control configuration
-	 *	  in the EEPROM is used.
+	 *          in the EEPROM is used.
 	 */
 	switch (hw->fc.current_mode) {
 	case e1000_fc_none:
@@ -1172,10 +1172,8 @@ s32 e1000e_setup_copper_link(struct e1000_hw *hw)
 	 * Check link status. Wait up to 100 microseconds for link to become
 	 * valid.
 	 */
-	ret_val = e1000e_phy_has_link_generic(hw,
-					     COPPER_LINK_UP_LIMIT,
-					     10,
-					     &link);
+	ret_val = e1000e_phy_has_link_generic(hw, COPPER_LINK_UP_LIMIT, 10,
+					      &link);
 	if (ret_val)
 		return ret_val;
 
@@ -1237,10 +1235,8 @@ s32 e1000e_phy_force_speed_duplex_igp(struct e1000_hw *hw)
 	if (phy->autoneg_wait_to_complete) {
 		e_dbg("Waiting for forced speed/duplex link on IGP phy.\n");
 
-		ret_val = e1000e_phy_has_link_generic(hw,
-						     PHY_FORCE_LIMIT,
-						     100000,
-						     &link);
+		ret_val = e1000e_phy_has_link_generic(hw, PHY_FORCE_LIMIT,
+						      100000, &link);
 		if (ret_val)
 			return ret_val;
 
@@ -1248,10 +1244,8 @@ s32 e1000e_phy_force_speed_duplex_igp(struct e1000_hw *hw)
 			e_dbg("Link taking longer than expected.\n");
 
 		/* Try once more */
-		ret_val = e1000e_phy_has_link_generic(hw,
-						     PHY_FORCE_LIMIT,
-						     100000,
-						     &link);
+		ret_val = e1000e_phy_has_link_generic(hw, PHY_FORCE_LIMIT,
+						      100000, &link);
 	}
 
 	return ret_val;
@@ -1412,10 +1406,8 @@ s32 e1000_phy_force_speed_duplex_ife(struct e1000_hw *hw)
 	if (phy->autoneg_wait_to_complete) {
 		e_dbg("Waiting for forced speed/duplex link on IFE phy.\n");
 
-		ret_val = e1000e_phy_has_link_generic(hw,
-		                                     PHY_FORCE_LIMIT,
-		                                     100000,
-		                                     &link);
+		ret_val = e1000e_phy_has_link_generic(hw, PHY_FORCE_LIMIT,
+						      100000, &link);
 		if (ret_val)
 			return ret_val;
 
@@ -1423,10 +1415,8 @@ s32 e1000_phy_force_speed_duplex_ife(struct e1000_hw *hw)
 			e_dbg("Link taking longer than expected.\n");
 
 		/* Try once more */
-		ret_val = e1000e_phy_has_link_generic(hw,
-		                                     PHY_FORCE_LIMIT,
-		                                     100000,
-		                                     &link);
+		ret_val = e1000e_phy_has_link_generic(hw, PHY_FORCE_LIMIT,
+						      100000, &link);
 		if (ret_val)
 			return ret_val;
 	}
@@ -2167,6 +2157,7 @@ s32 e1000e_phy_hw_reset_generic(struct e1000_hw *hw)
 s32 e1000e_get_cfg_done(struct e1000_hw *hw)
 {
 	mdelay(10);
+
 	return 0;
 }
 
@@ -3155,13 +3146,11 @@ s32 e1000_link_stall_workaround_hv(struct e1000_hw *hw)
 	if (ret_val)
 		return ret_val;
 
-	data &= BM_CS_STATUS_LINK_UP |
-	        BM_CS_STATUS_RESOLVED |
-	        BM_CS_STATUS_SPEED_MASK;
+	data &= BM_CS_STATUS_LINK_UP | BM_CS_STATUS_RESOLVED |
+		BM_CS_STATUS_SPEED_MASK;
 
-	if (data != (BM_CS_STATUS_LINK_UP |
-	             BM_CS_STATUS_RESOLVED |
-	             BM_CS_STATUS_SPEED_1000))
+	if (data != (BM_CS_STATUS_LINK_UP | BM_CS_STATUS_RESOLVED |
+		     BM_CS_STATUS_SPEED_1000))
 		return 0;
 
 	mdelay(200);
@@ -3227,10 +3216,8 @@ s32 e1000_phy_force_speed_duplex_82577(struct e1000_hw *hw)
 	if (phy->autoneg_wait_to_complete) {
 		e_dbg("Waiting for forced speed/duplex link on 82577 phy\n");
 
-		ret_val = e1000e_phy_has_link_generic(hw,
-		                                     PHY_FORCE_LIMIT,
-		                                     100000,
-		                                     &link);
+		ret_val = e1000e_phy_has_link_generic(hw, PHY_FORCE_LIMIT,
+						      100000, &link);
 		if (ret_val)
 			return ret_val;
 
@@ -3238,10 +3225,8 @@ s32 e1000_phy_force_speed_duplex_82577(struct e1000_hw *hw)
 			e_dbg("Link taking longer than expected.\n");
 
 		/* Try once more */
-		ret_val = e1000e_phy_has_link_generic(hw,
-		                                     PHY_FORCE_LIMIT,
-		                                     100000,
-		                                     &link);
+		ret_val = e1000e_phy_has_link_generic(hw, PHY_FORCE_LIMIT,
+						      100000, &link);
 	}
 
 	return ret_val;
-- 
1.7.7.6

[net-next 06/10] e1000e: use msleep instead of mdelay

[Jeff Kirsher]

From: Bruce Allan <bruce.w.allan@intel.com>

The e1000_link_stall_workaround_lv() function is always called in non-
atomic context so it should use msleep instead of mdelay.  Also, remove
unnecessary #include <linux/delay.h>.

Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/e1000e/phy.c |    4 +---
 1 files changed, 1 insertions(+), 3 deletions(-)

diff --git a/drivers/net/ethernet/intel/e1000e/phy.c b/drivers/net/ethernet/intel/e1000e/phy.c
index 6e768b1..35b4557 100644
--- a/drivers/net/ethernet/intel/e1000e/phy.c
+++ b/drivers/net/ethernet/intel/e1000e/phy.c
@@ -26,8 +26,6 @@
 
 *******************************************************************************/
 
-#include <linux/delay.h>
-
 #include "e1000.h"
 
 static s32 e1000_get_phy_cfg_done(struct e1000_hw *hw);
@@ -3153,7 +3151,7 @@ s32 e1000_link_stall_workaround_hv(struct e1000_hw *hw)
 		     BM_CS_STATUS_SPEED_1000))
 		return 0;
 
-	mdelay(200);
+	msleep(200);
 
 	/* flush the packets in the fifo buffer */
 	ret_val = e1e_wphy(hw, HV_MUX_DATA_CTRL, HV_MUX_DATA_CTRL_GEN_TO_MAC |
-- 
1.7.7.6

[net-next 07/10] ixgbe: Minor formatting and comment corrections for ixgbe_xmit_frame_ring

[Jeff Kirsher]

From: Alexander Duyck <alexander.h.duyck@intel.com>

This patch is meant to address several minor issues in
ixgbe_xmit_frame_ring.  Specifically it adds a comment explaining the TXSW
flag, and correctly wraps a line over 80 characters.

Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/ixgbe/ixgbe_main.c |   17 +++++++++++------
 1 files changed, 11 insertions(+), 6 deletions(-)

diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
index 4e55860..1cf676b 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
@@ -7012,11 +7012,6 @@ netdev_tx_t ixgbe_xmit_frame_ring(struct sk_buff *skb,
 		return NETDEV_TX_BUSY;
 	}
 
-#ifdef CONFIG_PCI_IOV
-	if (adapter->flags & IXGBE_FLAG_SRIOV_ENABLED)
-		tx_flags |= IXGBE_TX_FLAGS_TXSW;
-
-#endif
 	/* if we have a HW VLAN tag being added default to the HW one */
 	if (vlan_tx_tag_present(skb)) {
 		tx_flags |= vlan_tx_tag_get(skb) << IXGBE_TX_FLAGS_VLAN_SHIFT;
@@ -7029,10 +7024,20 @@ netdev_tx_t ixgbe_xmit_frame_ring(struct sk_buff *skb,
 			goto out_drop;
 
 		protocol = vhdr->h_vlan_encapsulated_proto;
-		tx_flags |= ntohs(vhdr->h_vlan_TCI) << IXGBE_TX_FLAGS_VLAN_SHIFT;
+		tx_flags |= ntohs(vhdr->h_vlan_TCI) <<
+				  IXGBE_TX_FLAGS_VLAN_SHIFT;
 		tx_flags |= IXGBE_TX_FLAGS_SW_VLAN;
 	}
 
+#ifdef CONFIG_PCI_IOV
+	/*
+	 * Use the l2switch_enable flag - would be false if the DMA
+	 * Tx switch had been disabled.
+	 */
+	if (adapter->flags & IXGBE_FLAG_SRIOV_ENABLED)
+		tx_flags |= IXGBE_TX_FLAGS_TXSW;
+
+#endif
 	/* DCB maps skb priorities 0-7 onto 3 bit PCP of VLAN tag. */
 	if ((adapter->flags & IXGBE_FLAG_DCB_ENABLED) &&
 	    ((tx_flags & (IXGBE_TX_FLAGS_HW_VLAN | IXGBE_TX_FLAGS_SW_VLAN)) ||
-- 
1.7.7.6

[net-next 08/10] ixgbe: fix spelling errors

[Jeff Kirsher]

From: Don Skidmore <donald.c.skidmore@intel.com>

Correct spelling error caught with codespell.py.

Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com>
Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/ixgbe/ixgbe_common.c |    2 +-
 1 files changed, 1 insertions(+), 1 deletions(-)

diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_common.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_common.c
index 383b941..87f6b4f 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_common.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_common.c
@@ -3336,7 +3336,7 @@ static u8 ixgbe_calculate_checksum(u8 *buffer, u32 length)
  *  @hw: pointer to the HW structure
  *  @buffer: contains the command to write and where the return status will
  *           be placed
- *  @lenght: lenght of buffer, must be multiple of 4 bytes
+ *  @length: length of buffer, must be multiple of 4 bytes
  *
  *  Communicates with the manageability block.  On success return 0
  *  else return IXGBE_ERR_HOST_INTERFACE_COMMAND.
-- 
1.7.7.6

[net-next 09/10] ixgbe: Fix comments that are out of date or formatted incorrectly

[Jeff Kirsher]

From: Alexander Duyck <alexander.h.duyck@intel.com>

This patch corrects several comments that are either incorrect or formatted
incorrectly for multiline comments.

Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/ixgbe/ixgbe_main.c |   13 +++++++++----
 1 files changed, 9 insertions(+), 4 deletions(-)

diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
index 1cf676b..23a4665 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
@@ -2359,7 +2359,7 @@ static irqreturn_t ixgbe_intr(int irq, void *data)
 	u32 eicr;
 
 	/*
-	 * Workaround for silicon errata on 82598.  Mask the interrupts
+	 * Workaround for silicon errata #26 on 82598.  Mask the interrupt
 	 * before the read of EICR.
 	 */
 	IXGBE_WRITE_REG(hw, IXGBE_EIMC, IXGBE_IRQ_CLEAR_MASK);
@@ -4381,7 +4381,11 @@ static inline bool ixgbe_set_fdir_queues(struct ixgbe_adapter *adapter)
 	f_fdir->indices = min((int)num_online_cpus(), f_fdir->indices);
 	f_fdir->mask = 0;
 
-	/* Flow Director must have RSS enabled */
+	/*
+	 * Use RSS in addition to Flow Director to ensure the best
+	 * distribution of flows across cores, even when an FDIR flow
+	 * isn't matched.
+	 */
 	if ((adapter->flags & IXGBE_FLAG_RSS_ENABLED) &&
 	    (adapter->flags & IXGBE_FLAG_FDIR_HASH_CAPABLE)) {
 		adapter->num_tx_queues = f_fdir->indices;
@@ -4558,7 +4562,8 @@ static void ixgbe_acquire_msix_vectors(struct ixgbe_adapter *adapter,
 	 */
 	vector_threshold = MIN_MSIX_COUNT;
 
-	/* The more we get, the more we will assign to Tx/Rx Cleanup
+	/*
+	 * The more we get, the more we will assign to Tx/Rx Cleanup
 	 * for the separate queues...where Rx Cleanup >= Tx Cleanup.
 	 * Right now, we simply care about how many we'll get; we'll
 	 * set them up later while requesting irq's.
@@ -6996,7 +7001,7 @@ netdev_tx_t ixgbe_xmit_frame_ring(struct sk_buff *skb,
 
 	/*
 	 * need: 1 descriptor per page * PAGE_SIZE/IXGBE_MAX_DATA_PER_TXD,
-	 *       + 1 desc for skb_head_len/IXGBE_MAX_DATA_PER_TXD,
+	 *       + 1 desc for skb_headlen/IXGBE_MAX_DATA_PER_TXD,
 	 *       + 2 desc gap to keep tail from touching head,
 	 *       + 1 desc for context descriptor,
 	 * otherwise try next time
-- 
1.7.7.6

[net-next 10/10] rtnetlink: Fix VF IFLA policy

[Jeff Kirsher]

From: Greg Rose <gregory.v.rose@intel.com>

Add VF spoof check to IFLA policy.  The original patch I submitted to
add the spoof checking feature to rtnl failed to add the proper policy
rule that identifies the data type and len.  This patch corrects that
oversight.  No bugs have been reported against this but it may cause
some problem for the netlink message parsing that uses the policy
table.

CC: stable@vger.kernel.org
Signed-off-by: Greg Rose <gregory.v.rose@intel.com>
Tested-by: Sibai Li <sibai.li@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 net/core/rtnetlink.c |    2 ++
 1 files changed, 2 insertions(+), 0 deletions(-)

diff --git a/net/core/rtnetlink.c b/net/core/rtnetlink.c
index 5cf39cd..2be1018 100644
--- a/net/core/rtnetlink.c
+++ b/net/core/rtnetlink.c
@@ -1132,6 +1132,8 @@ static const struct nla_policy ifla_vf_policy[IFLA_VF_MAX+1] = {
 				    .len = sizeof(struct ifla_vf_vlan) },
 	[IFLA_VF_TX_RATE]	= { .type = NLA_BINARY,
 				    .len = sizeof(struct ifla_vf_tx_rate) },
+	[IFLA_VF_SPOOFCHK]	= { .type = NLA_BINARY,
+				    .len = sizeof(struct ifla_vf_spoofchk) },
 };
 
 static const struct nla_policy ifla_port_policy[IFLA_PORT_MAX+1] = {
-- 
1.7.7.6

Re: [net-next 0/4][pull request] Intel Wired LAN Driver Updates

[Jeff Kirsher]

[-- Attachment #1: Type: text/plain, Size: 1109 bytes --]

On Fri, 2012-03-02 at 18:24 -0800, Jeff Kirsher wrote:
> This series of patches contains fixes e100 and DCB (ixgbe, bnx2x).
> 
> The following are changes since commit b4017c5368f992fb8fb3a2545a0977082c6664e4:
>   Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
> and are available in the git repository at:
>   git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net-next master
> 
> Ben Greear (2):
>   e100: Fix rx-over-length statistics.
>   e100: Show short v/s long rx length errors in ethtool stats.
> 
> John Fastabend (2):
>   ixgbe: dcb: check setup_tc return codes
>   net: dcb: getnumtcs()/setnumtcs() should return an int
> 
>  drivers/net/ethernet/broadcom/bnx2x/bnx2x_dcb.c |    4 +-
>  drivers/net/ethernet/intel/e100.c               |    8 +++++-
>  drivers/net/ethernet/intel/ixgbe/ixgbe_dcb_nl.c |   30 +++++++++++++++-------
>  include/net/dcbnl.h                             |    4 +-
>  4 files changed, 31 insertions(+), 15 deletions(-)
> 

Please disregard this first pull request, patches from a previous pull
request were sent accidentally.

[-- Attachment #2: This is a digitally signed message part --]
[-- Type: application/pgp-signature, Size: 836 bytes --]

[net-next 0/4][pull request] Intel Wired LAN Driver Updates

[Jeff Kirsher]

This series of patches contains fixes e100 and DCB (ixgbe, bnx2x).

The following are changes since commit b4017c5368f992fb8fb3a2545a0977082c6664e4:
  Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
and are available in the git repository at:
  git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net-next master

Ben Greear (2):
  e100: Fix rx-over-length statistics.
  e100: Show short v/s long rx length errors in ethtool stats.

John Fastabend (2):
  ixgbe: dcb: check setup_tc return codes
  net: dcb: getnumtcs()/setnumtcs() should return an int

 drivers/net/ethernet/broadcom/bnx2x/bnx2x_dcb.c |    4 +-
 drivers/net/ethernet/intel/e100.c               |    8 +++++-
 drivers/net/ethernet/intel/ixgbe/ixgbe_dcb_nl.c |   30 +++++++++++++++-------
 include/net/dcbnl.h                             |    4 +-
 4 files changed, 31 insertions(+), 15 deletions(-)

-- 
1.7.7.6

[net-next 1/4] e100: Fix rx-over-length statistics.

[Jeff Kirsher]

From: Ben Greear <greearb@candelatech.com>

The old code would += the total errors every time
stats were gathered.  Instead, keep a count of short-pkt
and long-pkt counters and then simply add them together
for the rx-over-length stat.

Signed-off-by: Ben Greear <greearb@candelatech.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/e100.c |    5 ++++-
 1 files changed, 4 insertions(+), 1 deletions(-)

diff --git a/drivers/net/ethernet/intel/e100.c b/drivers/net/ethernet/intel/e100.c
index 4d8a616..d2b7872 100644
--- a/drivers/net/ethernet/intel/e100.c
+++ b/drivers/net/ethernet/intel/e100.c
@@ -622,6 +622,7 @@ struct nic {
 	u32 rx_fc_pause;
 	u32 rx_fc_unsupported;
 	u32 rx_tco_frames;
+	u32 rx_short_frame_errors;
 	u32 rx_over_length_errors;
 
 	u16 eeprom_wc;
@@ -1622,7 +1623,9 @@ static void e100_update_stats(struct nic *nic)
 		ns->collisions += nic->tx_collisions;
 		ns->tx_errors += le32_to_cpu(s->tx_max_collisions) +
 			le32_to_cpu(s->tx_lost_crs);
-		ns->rx_length_errors += le32_to_cpu(s->rx_short_frame_errors) +
+		nic->rx_short_frame_errors +=
+			le32_to_cpu(s->rx_short_frame_errors);
+		ns->rx_length_errors = nic->rx_short_frame_errors +
 			nic->rx_over_length_errors;
 		ns->rx_crc_errors += le32_to_cpu(s->rx_crc_errors);
 		ns->rx_frame_errors += le32_to_cpu(s->rx_alignment_errors);
-- 
1.7.7.6