netdev.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
To: davem@davemloft.net
Cc: Alexander Duyck <alexander.h.duyck@intel.com>,
	netdev@vger.kernel.org, gospo@redhat.com, sassmann@redhat.com,
	Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Subject: [net-next 14/14] ixgbe: Simplify logic for ethtool loopback frame creation and testing
Date: Mon, 12 Mar 2012 21:03:52 -0700	[thread overview]
Message-ID: <1331611432-30109-15-git-send-email-jeffrey.t.kirsher@intel.com> (raw)
In-Reply-To: <1331611432-30109-1-git-send-email-jeffrey.t.kirsher@intel.com>

From: Alexander Duyck <alexander.h.duyck@intel.com>

This change makes it a bit easier to do the loopback frame creating and
testing.  Previously we were doing an and to drop the last bit, and then
dividing the frame_size by 2 in order to get locations for frame bytes and
testing.  Instead we can simplify it by just shifting the register one bit
to the right and using that for the frame offsets.

This change also replaces all instances of rx_buffer_info with just
rx_buffer since that is closer to the name of the actual structure being
used and can save a few extra characters.

In addition I have updated the logic for cleaning up a test frame so that
we pass an rx_buffer instead of the sk_buff.  The main motivation behind
this is changes that will replace the sk_buff with just a page in the
future.

Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Tested-by: Stephen Ko <stephen.s.ko@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c |   63 +++++++++++-----------
 1 files changed, 32 insertions(+), 31 deletions(-)

diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c
index 51d159b..1216bae 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c
@@ -1701,63 +1701,65 @@ static void ixgbe_loopback_cleanup(struct ixgbe_adapter *adapter)
 }
 
 static void ixgbe_create_lbtest_frame(struct sk_buff *skb,
-                                      unsigned int frame_size)
+				      unsigned int frame_size)
 {
 	memset(skb->data, 0xFF, frame_size);
-	frame_size &= ~1;
-	memset(&skb->data[frame_size / 2], 0xAA, frame_size / 2 - 1);
-	memset(&skb->data[frame_size / 2 + 10], 0xBE, 1);
-	memset(&skb->data[frame_size / 2 + 12], 0xAF, 1);
+	frame_size >>= 1;
+	memset(&skb->data[frame_size], 0xAA, frame_size / 2 - 1);
+	memset(&skb->data[frame_size + 10], 0xBE, 1);
+	memset(&skb->data[frame_size + 12], 0xAF, 1);
 }
 
-static int ixgbe_check_lbtest_frame(struct sk_buff *skb,
-                                    unsigned int frame_size)
+static bool ixgbe_check_lbtest_frame(struct ixgbe_rx_buffer *rx_buffer,
+				     unsigned int frame_size)
 {
-	frame_size &= ~1;
-	if (*(skb->data + 3) == 0xFF) {
-		if ((*(skb->data + frame_size / 2 + 10) == 0xBE) &&
-		    (*(skb->data + frame_size / 2 + 12) == 0xAF)) {
-			return 0;
-		}
-	}
-	return 13;
+	unsigned char *data;
+	bool match = true;
+
+	frame_size >>= 1;
+
+	data = rx_buffer->skb->data;
+
+	if (data[3] != 0xFF ||
+	    data[frame_size + 10] != 0xBE ||
+	    data[frame_size + 12] != 0xAF)
+		match = false;
+
+	return match;
 }
 
 static u16 ixgbe_clean_test_rings(struct ixgbe_ring *rx_ring,
-                                  struct ixgbe_ring *tx_ring,
-                                  unsigned int size)
+				  struct ixgbe_ring *tx_ring,
+				  unsigned int size)
 {
 	union ixgbe_adv_rx_desc *rx_desc;
-	struct ixgbe_rx_buffer *rx_buffer_info;
-	struct ixgbe_tx_buffer *tx_buffer_info;
-	const int bufsz = rx_ring->rx_buf_len;
-	u32 staterr;
+	struct ixgbe_rx_buffer *rx_buffer;
+	struct ixgbe_tx_buffer *tx_buffer;
 	u16 rx_ntc, tx_ntc, count = 0;
 
 	/* initialize next to clean and descriptor values */
 	rx_ntc = rx_ring->next_to_clean;
 	tx_ntc = tx_ring->next_to_clean;
 	rx_desc = IXGBE_RX_DESC(rx_ring, rx_ntc);
-	staterr = le32_to_cpu(rx_desc->wb.upper.status_error);
 
-	while (staterr & IXGBE_RXD_STAT_DD) {
+	while (ixgbe_test_staterr(rx_desc, IXGBE_RXD_STAT_DD)) {
 		/* check Rx buffer */
-		rx_buffer_info = &rx_ring->rx_buffer_info[rx_ntc];
+		rx_buffer = &rx_ring->rx_buffer_info[rx_ntc];
 
 		/* unmap Rx buffer, will be remapped by alloc_rx_buffers */
 		dma_unmap_single(rx_ring->dev,
-		                 rx_buffer_info->dma,
-				 bufsz,
+				 rx_buffer->dma,
+				 rx_ring->rx_buf_len,
 				 DMA_FROM_DEVICE);
-		rx_buffer_info->dma = 0;
+		rx_buffer->dma = 0;
 
 		/* verify contents of skb */
-		if (!ixgbe_check_lbtest_frame(rx_buffer_info->skb, size))
+		if (ixgbe_check_lbtest_frame(rx_buffer, size))
 			count++;
 
 		/* unmap buffer on Tx side */
-		tx_buffer_info = &tx_ring->tx_buffer_info[tx_ntc];
-		ixgbe_unmap_and_free_tx_resource(tx_ring, tx_buffer_info);
+		tx_buffer = &tx_ring->tx_buffer_info[tx_ntc];
+		ixgbe_unmap_and_free_tx_resource(tx_ring, tx_buffer);
 
 		/* increment Rx/Tx next to clean counters */
 		rx_ntc++;
@@ -1769,7 +1771,6 @@ static u16 ixgbe_clean_test_rings(struct ixgbe_ring *rx_ring,
 
 		/* fetch next descriptor */
 		rx_desc = IXGBE_RX_DESC(rx_ring, rx_ntc);
-		staterr = le32_to_cpu(rx_desc->wb.upper.status_error);
 	}
 
 	/* re-map buffers to ring, store next to clean values */
-- 
1.7.7.6

  parent reply	other threads:[~2012-03-13  4:04 UTC|newest]

Thread overview: 23+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-03-13  4:03 [net-next 00/14][pull request] Intel Wired LAN Driver Updates Jeff Kirsher
2012-03-13  4:03 ` [net-next 01/14] igb: fix ethtool offline test Jeff Kirsher
2012-03-13  4:03 ` [net-next 02/14] ixgbe: remove tie between NAPI work limits and interrupt moderation Jeff Kirsher
2012-03-13  4:03 ` [net-next 03/14] ixgbe: add support for byte queue limits Jeff Kirsher
2012-03-13  4:03 ` [net-next 04/14] net: Fix issue with netdev_tx_reset_queue not resetting queue from XOFF state Jeff Kirsher
2012-04-20 21:19   ` Tom Herbert
2012-04-20 21:31     ` John Fastabend
2012-04-21  3:24       ` Alexander Duyck
2012-04-21  6:01         ` Tom Herbert
2012-04-21 16:27           ` John Fastabend
2012-04-21 20:18             ` David Miller
2012-04-23  3:21               ` John Fastabend
2012-03-13  4:03 ` [net-next 05/14] net: Add memory barriers to prevent possible race in byte queue limits Jeff Kirsher
2012-03-13  4:03 ` [net-next 06/14] ixgbe: Do no clear Tx status bits since eop_desc provides enough info Jeff Kirsher
2012-03-13  4:03 ` [net-next 07/14] ixgbe: Reorder adapter contents for better cache utilization Jeff Kirsher
2012-03-13  4:03 ` [net-next 08/14] ixgbe: Address issues with Tx WHTRESH value not being set correctly Jeff Kirsher
2012-03-13  4:03 ` [net-next 09/14] ixgbe: Correct Adaptive Interrupt Moderation so that it will change values Jeff Kirsher
2012-03-13  4:03 ` [net-next 10/14] ixgbe: Default to queue pairs when number of queues is less than CPUs Jeff Kirsher
2012-03-13  4:03 ` [net-next 11/14] ixgbe: Drop unnecessary napi_schedule_prep and spare blank line from ixgbe_intr Jeff Kirsher
2012-03-13  4:03 ` [net-next 12/14] ixgbe: Allocate rings as part of the q_vector Jeff Kirsher
2012-03-13  4:03 ` [net-next 13/14] ixgbe: Add iterator for cycling through rings on a q_vector Jeff Kirsher
2012-03-13  4:03 ` Jeff Kirsher [this message]
2012-03-13  5:55 ` [net-next 00/14][pull request] Intel Wired LAN Driver Updates David Miller

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1331611432-30109-15-git-send-email-jeffrey.t.kirsher@intel.com \
    --to=jeffrey.t.kirsher@intel.com \
    --cc=alexander.h.duyck@intel.com \
    --cc=davem@davemloft.net \
    --cc=gospo@redhat.com \
    --cc=netdev@vger.kernel.org \
    --cc=sassmann@redhat.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).