From: "Yuval Mintz" <yuvalmin@broadcom.com>
To: netdev@vger.kernel.org, davem@davemloft.net
Cc: eilong@broadcom.com, "Dmitry Kravkov" <dmitry@broadcom.com>,
"Yuval Mintz" <yuvalmin@broadcom.com>
Subject: [net-next 5/9] bnx2x: changed initial dcb configuration
Date: Sun, 18 Mar 2012 16:33:41 -0400 [thread overview]
Message-ID: <1332102825-7838-6-git-send-email-yuvalmin@broadcom.com> (raw)
In-Reply-To: <1332102825-7838-1-git-send-email-yuvalmin@broadcom.com>
From: Dmitry Kravkov <dmitry@broadcom.com>
The changes were mostly made to enable back-to-back data flow with dcb.
Other changes were simply deemed as a better 'clean' initial configuration.
Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com>
Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com>
---
drivers/net/ethernet/broadcom/bnx2x/bnx2x_dcb.c | 45 ++++++++---------------
1 files changed, 16 insertions(+), 29 deletions(-)
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_dcb.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_dcb.c
index 87560f6..fafbc00 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_dcb.c
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_dcb.c
@@ -923,30 +923,30 @@ void bnx2x_dcbx_init_params(struct bnx2x *bp)
bp->dcbx_config_params.admin_application_priority_tx_enable = 1;
bp->dcbx_config_params.admin_ets_reco_valid = 1;
bp->dcbx_config_params.admin_app_priority_willing = 1;
- bp->dcbx_config_params.admin_configuration_bw_precentage[0] = 00;
- bp->dcbx_config_params.admin_configuration_bw_precentage[1] = 50;
- bp->dcbx_config_params.admin_configuration_bw_precentage[2] = 50;
+ bp->dcbx_config_params.admin_configuration_bw_precentage[0] = 100;
+ bp->dcbx_config_params.admin_configuration_bw_precentage[1] = 0;
+ bp->dcbx_config_params.admin_configuration_bw_precentage[2] = 0;
bp->dcbx_config_params.admin_configuration_bw_precentage[3] = 0;
bp->dcbx_config_params.admin_configuration_bw_precentage[4] = 0;
bp->dcbx_config_params.admin_configuration_bw_precentage[5] = 0;
bp->dcbx_config_params.admin_configuration_bw_precentage[6] = 0;
bp->dcbx_config_params.admin_configuration_bw_precentage[7] = 0;
- bp->dcbx_config_params.admin_configuration_ets_pg[0] = 1;
+ bp->dcbx_config_params.admin_configuration_ets_pg[0] = 0;
bp->dcbx_config_params.admin_configuration_ets_pg[1] = 0;
bp->dcbx_config_params.admin_configuration_ets_pg[2] = 0;
- bp->dcbx_config_params.admin_configuration_ets_pg[3] = 2;
+ bp->dcbx_config_params.admin_configuration_ets_pg[3] = 0;
bp->dcbx_config_params.admin_configuration_ets_pg[4] = 0;
bp->dcbx_config_params.admin_configuration_ets_pg[5] = 0;
bp->dcbx_config_params.admin_configuration_ets_pg[6] = 0;
bp->dcbx_config_params.admin_configuration_ets_pg[7] = 0;
- bp->dcbx_config_params.admin_recommendation_bw_precentage[0] = 0;
- bp->dcbx_config_params.admin_recommendation_bw_precentage[1] = 1;
- bp->dcbx_config_params.admin_recommendation_bw_precentage[2] = 2;
+ bp->dcbx_config_params.admin_recommendation_bw_precentage[0] = 100;
+ bp->dcbx_config_params.admin_recommendation_bw_precentage[1] = 0;
+ bp->dcbx_config_params.admin_recommendation_bw_precentage[2] = 0;
bp->dcbx_config_params.admin_recommendation_bw_precentage[3] = 0;
- bp->dcbx_config_params.admin_recommendation_bw_precentage[4] = 7;
- bp->dcbx_config_params.admin_recommendation_bw_precentage[5] = 5;
- bp->dcbx_config_params.admin_recommendation_bw_precentage[6] = 6;
- bp->dcbx_config_params.admin_recommendation_bw_precentage[7] = 7;
+ bp->dcbx_config_params.admin_recommendation_bw_precentage[4] = 0;
+ bp->dcbx_config_params.admin_recommendation_bw_precentage[5] = 0;
+ bp->dcbx_config_params.admin_recommendation_bw_precentage[6] = 0;
+ bp->dcbx_config_params.admin_recommendation_bw_precentage[7] = 0;
bp->dcbx_config_params.admin_recommendation_ets_pg[0] = 0;
bp->dcbx_config_params.admin_recommendation_ets_pg[1] = 1;
bp->dcbx_config_params.admin_recommendation_ets_pg[2] = 2;
@@ -955,25 +955,12 @@ void bnx2x_dcbx_init_params(struct bnx2x *bp)
bp->dcbx_config_params.admin_recommendation_ets_pg[5] = 5;
bp->dcbx_config_params.admin_recommendation_ets_pg[6] = 6;
bp->dcbx_config_params.admin_recommendation_ets_pg[7] = 7;
- bp->dcbx_config_params.admin_pfc_bitmap = 0x8; /* FCoE(3) enable */
- bp->dcbx_config_params.admin_priority_app_table[0].valid = 1;
- bp->dcbx_config_params.admin_priority_app_table[1].valid = 1;
+ bp->dcbx_config_params.admin_pfc_bitmap = 0x0;
+ bp->dcbx_config_params.admin_priority_app_table[0].valid = 0;
+ bp->dcbx_config_params.admin_priority_app_table[1].valid = 0;
bp->dcbx_config_params.admin_priority_app_table[2].valid = 0;
bp->dcbx_config_params.admin_priority_app_table[3].valid = 0;
- bp->dcbx_config_params.admin_priority_app_table[0].priority = 3;
- bp->dcbx_config_params.admin_priority_app_table[1].priority = 0;
- bp->dcbx_config_params.admin_priority_app_table[2].priority = 0;
- bp->dcbx_config_params.admin_priority_app_table[3].priority = 0;
- bp->dcbx_config_params.admin_priority_app_table[0].traffic_type = 0;
- bp->dcbx_config_params.admin_priority_app_table[1].traffic_type = 1;
- bp->dcbx_config_params.admin_priority_app_table[2].traffic_type = 0;
- bp->dcbx_config_params.admin_priority_app_table[3].traffic_type = 0;
- bp->dcbx_config_params.admin_priority_app_table[0].app_id = 0x8906;
- bp->dcbx_config_params.admin_priority_app_table[1].app_id = 3260;
- bp->dcbx_config_params.admin_priority_app_table[2].app_id = 0;
- bp->dcbx_config_params.admin_priority_app_table[3].app_id = 0;
- bp->dcbx_config_params.admin_default_priority =
- bp->dcbx_config_params.admin_priority_app_table[1].priority;
+ bp->dcbx_config_params.admin_default_priority = 0;
}
void bnx2x_dcbx_init(struct bnx2x *bp)
--
1.7.9.rc2
next prev parent reply other threads:[~2012-03-18 13:48 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-03-18 20:33 [net-next 0/9] bnx2x: feature patch series Yuval Mintz
2012-03-18 20:33 ` [net-next 1/9] bnx2x: added 'likely' to fast-path skb existence Yuval Mintz
2012-03-18 20:33 ` [net-next 2/9] bnx2x: revised driver prints Yuval Mintz
2012-03-18 20:33 ` [net-next 3/9] bnx2x: reduced sparse warnings Yuval Mintz
2012-03-18 20:33 ` [net-next 4/9] bnx2x: removed dcb unused code Yuval Mintz
2012-03-18 20:33 ` Yuval Mintz [this message]
2012-03-18 20:33 ` [net-next 6/9] bnx2x: added TLV_NOT_FOUND flags to the dcb Yuval Mintz
2012-03-18 20:33 ` [net-next 7/9] bnx2x: changed iscsi/fcoe mac init and macros Yuval Mintz
2012-03-18 20:33 ` [net-next 8/9] bnx2x: consistent statistics for old FW Yuval Mintz
2012-03-18 20:52 ` Yuval Mintz
2012-03-18 20:33 ` [net-next 9/9] bnx2x: validate FW trace prior to its printing Yuval Mintz
2012-03-19 20:57 ` [net-next 0/9] bnx2x: feature patch series David Miller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1332102825-7838-6-git-send-email-yuvalmin@broadcom.com \
--to=yuvalmin@broadcom.com \
--cc=davem@davemloft.net \
--cc=dmitry@broadcom.com \
--cc=eilong@broadcom.com \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).