From: Takahiro Shimizu <tshimizu818@gmail.com>
To: jeffrey.t.kirsher@intel.com, davem@davemloft.net,
lucas.demarchi@profusion.mobi, mirq-linux@rere.qmqm.pl,
paul.gortmaker@windriver.com, jdmason@kudzu.us,
john.stultz@linaro.org, richardcochran@gmail.com, arnd@arndb.de,
khc@pm.waw.pl, netdev@vger.kernel.org,
linux-kernel@vger.kernel.org
Cc: qi.wang@intel.com, yong.y.wang@intel.com, joel.clark@intel.com,
kok.howg.ewe@intel.com, Takahiro Shimizu <tshimizu818@gmail.com>
Subject: [PATCH] net/pch_gbe: Fixed the issue that the multicast address is lost when Rx FIFO overrun happened
Date: Fri, 23 Mar 2012 11:16:31 +0900 [thread overview]
Message-ID: <1332468991-2614-1-git-send-email-tshimizu818@gmail.com> (raw)
Signed-off-by: Takahiro Shimizu <tshimizu818@gmail.com>
---
.../net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c | 60 +++++++++++++++++++-
1 files changed, 57 insertions(+), 3 deletions(-)
diff --git a/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c b/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c
index d983e76..56089ca 100644
--- a/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c
+++ b/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c
@@ -382,31 +382,85 @@ static void pch_gbe_mac_mar_set(struct pch_gbe_hw *hw, u8 * addr, u32 index)
}
/**
+ * pch_gbe_mac_save_mac_addr_regs - Save MAC addresse registers
+ * @hw: Pointer to the HW structure
+ * @addr: Pointer to the MAC address
+ * @index: MAC address array register
+ */
+static void
+pch_gbe_mac_save_mac_addr_regs(struct pch_gbe_hw *hw,
+ struct pch_gbe_regs_mac_adr *mac_adr, u32 index)
+{
+ mac_adr->high = ioread32(&hw->reg->mac_adr[index].high);
+ mac_adr->low = ioread32(&hw->reg->mac_adr[index].low);
+}
+
+/**
+ * pch_gbe_mac_store_mac_addr_regs - Store MAC addresse registers
+ * @hw: Pointer to the HW structure
+ * @addr: Pointer to the MAC address
+ * @index: MAC address array register
+ */
+static void
+pch_gbe_mac_store_mac_addr_regs(struct pch_gbe_hw *hw,
+ struct pch_gbe_regs_mac_adr *mac_adr, u32 index)
+{
+ u32 adrmask;
+
+ adrmask = ioread32(&hw->reg->ADDR_MASK);
+ iowrite32((adrmask | (0x0001 << index)), &hw->reg->ADDR_MASK);
+ /* wait busy */
+ pch_gbe_wait_clr_bit(&hw->reg->ADDR_MASK, PCH_GBE_BUSY);
+ /* Set the MAC address to the MAC address xA/xB register */
+ iowrite32(mac_adr->high, &hw->reg->mac_adr[index].high);
+ iowrite32(mac_adr->low, &hw->reg->mac_adr[index].low);
+ iowrite32((adrmask & ~(0x0001 << index)), &hw->reg->ADDR_MASK);
+ /* wait busy */
+ pch_gbe_wait_clr_bit(&hw->reg->ADDR_MASK, PCH_GBE_BUSY);
+}
+
+#define MAC_ADDR_LIST_NUM 16
+/**
* pch_gbe_mac_reset_hw - Reset hardware
* @hw: Pointer to the HW structure
*/
static void pch_gbe_mac_reset_hw(struct pch_gbe_hw *hw)
{
+ struct pch_gbe_regs_mac_adr mac_addr_list[MAC_ADDR_LIST_NUM];
+ int i;
+
/* Read the MAC address. and store to the private data */
pch_gbe_mac_read_mac_addr(hw);
+ /* Read other MAC addresses */
+ for (i = 1; i < MAC_ADDR_LIST_NUM; i++)
+ pch_gbe_mac_save_mac_addr_regs(hw, &mac_addr_list[i], i);
iowrite32(PCH_GBE_ALL_RST, &hw->reg->RESET);
#ifdef PCH_GBE_MAC_IFOP_RGMII
iowrite32(PCH_GBE_MODE_GMII_ETHER, &hw->reg->MODE);
#endif
pch_gbe_wait_clr_bit(&hw->reg->RESET, PCH_GBE_ALL_RST);
- /* Setup the receive address */
+ /* Setup the receive addresses */
pch_gbe_mac_mar_set(hw, hw->mac.addr, 0);
+ for (i = 1; i < MAC_ADDR_LIST_NUM; i++)
+ pch_gbe_mac_store_mac_addr_regs(hw, &mac_addr_list[i], i);
return;
}
static void pch_gbe_mac_reset_rx(struct pch_gbe_hw *hw)
{
- /* Read the MAC address. and store to the private data */
+ struct pch_gbe_regs_mac_adr mac_addr_list[MAC_ADDR_LIST_NUM];
+ int i;
+
+ /* Read the MAC addresses. and store to the private data */
pch_gbe_mac_read_mac_addr(hw);
+ for (i = 1; i < MAC_ADDR_LIST_NUM; i++)
+ pch_gbe_mac_save_mac_addr_regs(hw, &mac_addr_list[i], i);
iowrite32(PCH_GBE_RX_RST, &hw->reg->RESET);
pch_gbe_wait_clr_bit_irq(&hw->reg->RESET, PCH_GBE_RX_RST);
- /* Setup the MAC address */
+ /* Setup the MAC addresses */
pch_gbe_mac_mar_set(hw, hw->mac.addr, 0);
+ for (i = 1; i < MAC_ADDR_LIST_NUM; i++)
+ pch_gbe_mac_store_mac_addr_regs(hw, &mac_addr_list[i], i);
return;
}
--
1.7.4.4
reply other threads:[~2012-03-23 2:16 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1332468991-2614-1-git-send-email-tshimizu818@gmail.com \
--to=tshimizu818@gmail.com \
--cc=arnd@arndb.de \
--cc=davem@davemloft.net \
--cc=jdmason@kudzu.us \
--cc=jeffrey.t.kirsher@intel.com \
--cc=joel.clark@intel.com \
--cc=john.stultz@linaro.org \
--cc=khc@pm.waw.pl \
--cc=kok.howg.ewe@intel.com \
--cc=linux-kernel@vger.kernel.org \
--cc=lucas.demarchi@profusion.mobi \
--cc=mirq-linux@rere.qmqm.pl \
--cc=netdev@vger.kernel.org \
--cc=paul.gortmaker@windriver.com \
--cc=qi.wang@intel.com \
--cc=richardcochran@gmail.com \
--cc=yong.y.wang@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).