From: "Yuval Mintz" <yuvalmin@broadcom.com>
To: davem@davemloft.net, netdev@vger.kernel.org
Cc: eilong@broadcom.com, "Barak Witkowski" <barak@broadcom.com>,
"Yuval Mintz" <yuvalmin@broadcom.com>
Subject: [PATCH net-next 6/10] bnx2x: Added support for a new device - 57811
Date: Wed, 4 Apr 2012 07:41:28 +0300 [thread overview]
Message-ID: <1333514492-20425-7-git-send-email-yuvalmin@broadcom.com> (raw)
In-Reply-To: <1333514492-20425-1-git-send-email-yuvalmin@broadcom.com>
From: Barak Witkowski <barak@broadcom.com>
Notice this patch includes lines with over 80 characters, as to not
break strings.
Signed-off-by: Barak Witkowski <barak@broadcom.com>
Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
---
drivers/net/ethernet/broadcom/bnx2x/bnx2x.h | 6 ++++
drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c | 30 +++++++++++++++++++--
drivers/net/ethernet/broadcom/bnx2x/bnx2x_reg.h | 5 +++
3 files changed, 38 insertions(+), 3 deletions(-)
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h
index ae0dcd4..054ec9e 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h
@@ -815,6 +815,8 @@ struct bnx2x_common {
#define CHIP_NUM_57800_MF 0x16a5
#define CHIP_NUM_57810 0x168e
#define CHIP_NUM_57810_MF 0x16ae
+#define CHIP_NUM_57811 0x163d
+#define CHIP_NUM_57811_MF 0x163e
#define CHIP_NUM_57840 0x168d
#define CHIP_NUM_57840_MF 0x16ab
#define CHIP_IS_E1(bp) (CHIP_NUM(bp) == CHIP_NUM_57710)
@@ -826,6 +828,8 @@ struct bnx2x_common {
#define CHIP_IS_57800_MF(bp) (CHIP_NUM(bp) == CHIP_NUM_57800_MF)
#define CHIP_IS_57810(bp) (CHIP_NUM(bp) == CHIP_NUM_57810)
#define CHIP_IS_57810_MF(bp) (CHIP_NUM(bp) == CHIP_NUM_57810_MF)
+#define CHIP_IS_57811(bp) (CHIP_NUM(bp) == CHIP_NUM_57811)
+#define CHIP_IS_57811_MF(bp) (CHIP_NUM(bp) == CHIP_NUM_57811_MF)
#define CHIP_IS_57840(bp) (CHIP_NUM(bp) == CHIP_NUM_57840)
#define CHIP_IS_57840_MF(bp) (CHIP_NUM(bp) == CHIP_NUM_57840_MF)
#define CHIP_IS_E1H(bp) (CHIP_IS_57711(bp) || \
@@ -836,6 +840,8 @@ struct bnx2x_common {
CHIP_IS_57800_MF(bp) || \
CHIP_IS_57810(bp) || \
CHIP_IS_57810_MF(bp) || \
+ CHIP_IS_57811(bp) || \
+ CHIP_IS_57811_MF(bp) || \
CHIP_IS_57840(bp) || \
CHIP_IS_57840_MF(bp))
#define CHIP_IS_E1x(bp) (CHIP_IS_E1((bp)) || CHIP_IS_E1H((bp)))
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
index c5f85ad..faf12d0 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
@@ -139,7 +139,9 @@ enum bnx2x_board_type {
BCM57810,
BCM57810_MF,
BCM57840,
- BCM57840_MF
+ BCM57840_MF,
+ BCM57811,
+ BCM57811_MF
};
/* indexed by board_type, above */
@@ -156,8 +158,9 @@ static struct {
{ "Broadcom NetXtreme II BCM57810 10 Gigabit Ethernet" },
{ "Broadcom NetXtreme II BCM57810 10 Gigabit Ethernet Multi Function" },
{ "Broadcom NetXtreme II BCM57840 10/20 Gigabit Ethernet" },
- { "Broadcom NetXtreme II BCM57840 10/20 Gigabit "
- "Ethernet Multi Function"}
+ { "Broadcom NetXtreme II BCM57840 10/20 Gigabit Ethernet Multi Function"},
+ { "Broadcom NetXtreme II BCM57811 10 Gigabit Ethernet"},
+ { "Broadcom NetXtreme II BCM57811 10 Gigabit Ethernet Multi Function"},
};
#ifndef PCI_DEVICE_ID_NX2_57710
@@ -193,6 +196,12 @@ static struct {
#ifndef PCI_DEVICE_ID_NX2_57840_MF
#define PCI_DEVICE_ID_NX2_57840_MF CHIP_NUM_57840_MF
#endif
+#ifndef PCI_DEVICE_ID_NX2_57811
+#define PCI_DEVICE_ID_NX2_57811 CHIP_NUM_57811
+#endif
+#ifndef PCI_DEVICE_ID_NX2_57811_MF
+#define PCI_DEVICE_ID_NX2_57811_MF CHIP_NUM_57811_MF
+#endif
static DEFINE_PCI_DEVICE_TABLE(bnx2x_pci_tbl) = {
{ PCI_VDEVICE(BROADCOM, PCI_DEVICE_ID_NX2_57710), BCM57710 },
{ PCI_VDEVICE(BROADCOM, PCI_DEVICE_ID_NX2_57711), BCM57711 },
@@ -205,6 +214,8 @@ static DEFINE_PCI_DEVICE_TABLE(bnx2x_pci_tbl) = {
{ PCI_VDEVICE(BROADCOM, PCI_DEVICE_ID_NX2_57810_MF), BCM57810_MF },
{ PCI_VDEVICE(BROADCOM, PCI_DEVICE_ID_NX2_57840), BCM57840 },
{ PCI_VDEVICE(BROADCOM, PCI_DEVICE_ID_NX2_57840_MF), BCM57840_MF },
+ { PCI_VDEVICE(BROADCOM, PCI_DEVICE_ID_NX2_57811), BCM57811 },
+ { PCI_VDEVICE(BROADCOM, PCI_DEVICE_ID_NX2_57811_MF), BCM57811_MF },
{ 0 }
};
@@ -8859,6 +8870,17 @@ static void __devinit bnx2x_get_common_hwinfo(struct bnx2x *bp)
id |= (val & 0xf);
bp->common.chip_id = id;
+ /* force 57811 according to MISC register */
+ if (REG_RD(bp, MISC_REG_CHIP_TYPE) & MISC_REG_CHIP_TYPE_57811_MASK) {
+ if (CHIP_IS_57810(bp))
+ bp->common.chip_id = (CHIP_NUM_57811 << 16) |
+ (bp->common.chip_id & 0x0000FFFF);
+ else if (CHIP_IS_57810_MF(bp))
+ bp->common.chip_id = (CHIP_NUM_57811_MF << 16) |
+ (bp->common.chip_id & 0x0000FFFF);
+ bp->common.chip_id |= 0x1;
+ }
+
/* Set doorbell size */
bp->db_size = (1 << BNX2X_DB_SHIFT);
@@ -10975,6 +10997,8 @@ static int __devinit bnx2x_init_one(struct pci_dev *pdev,
case BCM57810_MF:
case BCM57840:
case BCM57840_MF:
+ case BCM57811:
+ case BCM57811_MF:
max_cos_est = BNX2X_MULTI_TX_COS_E3B0;
break;
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_reg.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_reg.h
index fd7fb45..2db0380 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_reg.h
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_reg.h
@@ -1482,6 +1482,11 @@
starts at 0x0 for the A0 tape-out and increments by one for each
all-layer tape-out. */
#define MISC_REG_CHIP_REV 0xa40c
+/* [R 14] otp_misc_do[100:0] spare bits collection: 13:11-
+ * otp_misc_do[100:98]; 10:7 - otp_misc_do[87:84]; 6:3 - otp_misc_do[75:72];
+ * 2:1 - otp_misc_do[51:50]; 0 - otp_misc_do[1]. */
+#define MISC_REG_CHIP_TYPE 0xac60
+#define MISC_REG_CHIP_TYPE_57811_MASK (1<<1)
/* [RW 32] The following driver registers(1...16) represent 16 drivers and
32 clients. Each client can be controlled by one driver only. One in each
bit represent that this driver control the appropriate client (Ex: bit 5
--
1.7.9.rc2
next prev parent reply other threads:[~2012-04-04 4:47 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-04-04 4:41 [PATCH net-next 0/10] bnx2x: Feature (+semantic) patch series Yuval Mintz
2012-04-04 4:41 ` [PATCH net-next 1/10] bnx2x: remove unnecessary .h dependencies Yuval Mintz
2012-04-04 4:41 ` [PATCH net-next 2/10] bnx2x: remove unnecessary dmae code Yuval Mintz
2012-04-04 4:41 ` [PATCH net-next 3/10] bnx2x: enable inta on the pci bus when used Yuval Mintz
2012-04-04 4:41 ` [PATCH net-next 4/10] bnx2x: added support for working with one msix irq Yuval Mintz
2012-04-04 4:41 ` [PATCH net-next 5/10] bnx2x: Add remote-fault link detection Yuval Mintz
2012-04-04 4:41 ` Yuval Mintz [this message]
2012-04-04 4:41 ` [PATCH net-next 7/10] bnx2x: congestion management re-organization Yuval Mintz
2012-04-04 4:41 ` [PATCH net-next 8/10] bnx2x: change to the rss engine Yuval Mintz
2012-04-04 4:41 ` [PATCH net-next 9/10] bnx2x: Change comments and white spaces Yuval Mintz
2012-04-04 4:41 ` [PATCH net-next 10/10] bnx2x: Change to driver version 1.72.10-0 Yuval Mintz
2012-04-04 5:38 ` [PATCH net-next 0/10] bnx2x: Feature (+semantic) patch series David Miller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1333514492-20425-7-git-send-email-yuvalmin@broadcom.com \
--to=yuvalmin@broadcom.com \
--cc=barak@broadcom.com \
--cc=davem@davemloft.net \
--cc=eilong@broadcom.com \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).