From: Tony Zelenoff <antonz@parallels.com>
To: <davem@davemloft.net>
Cc: <antonz@parallels.com>, <netdev@vger.kernel.org>
Subject: [PATCH] atl1: fix kernel panic in case of DMA errors
Date: Wed, 11 Apr 2012 20:15:03 +0400 [thread overview]
Message-ID: <1334160903-988902-1-git-send-email-antonz@parallels.com> (raw)
Problem:
There was two separate work_struct structures which share one
handler. Unfortunately getting atl1_adapter structure from
work_struct in case of DMA error was done from incorrect
offset which cause kernel panics.
Solution:
The useless work_struct for DMA error removed and
handler name changed to more generic one.
Signed-off-by: Tony Zelenoff <antonz@parallels.com>
---
drivers/net/ethernet/atheros/atlx/atl1.c | 12 +++++-------
drivers/net/ethernet/atheros/atlx/atl1.h | 3 +--
drivers/net/ethernet/atheros/atlx/atlx.c | 2 +-
3 files changed, 7 insertions(+), 10 deletions(-)
diff --git a/drivers/net/ethernet/atheros/atlx/atl1.c b/drivers/net/ethernet/atheros/atlx/atl1.c
index 40ac414..c926857 100644
--- a/drivers/net/ethernet/atheros/atlx/atl1.c
+++ b/drivers/net/ethernet/atheros/atlx/atl1.c
@@ -2476,7 +2476,7 @@ static irqreturn_t atl1_intr(int irq, void *data)
"pcie phy link down %x\n", status);
if (netif_running(adapter->netdev)) { /* reset MAC */
iowrite32(0, adapter->hw.hw_addr + REG_IMR);
- schedule_work(&adapter->pcie_dma_to_rst_task);
+ schedule_work(&adapter->reset_dev_task);
return IRQ_HANDLED;
}
}
@@ -2488,7 +2488,7 @@ static irqreturn_t atl1_intr(int irq, void *data)
"pcie DMA r/w error (status = 0x%x)\n",
status);
iowrite32(0, adapter->hw.hw_addr + REG_IMR);
- schedule_work(&adapter->pcie_dma_to_rst_task);
+ schedule_work(&adapter->reset_dev_task);
return IRQ_HANDLED;
}
@@ -2633,10 +2633,10 @@ static void atl1_down(struct atl1_adapter *adapter)
atl1_clean_rx_ring(adapter);
}
-static void atl1_tx_timeout_task(struct work_struct *work)
+static void atl1_reset_dev_task(struct work_struct *work)
{
struct atl1_adapter *adapter =
- container_of(work, struct atl1_adapter, tx_timeout_task);
+ container_of(work, struct atl1_adapter, reset_dev_task);
struct net_device *netdev = adapter->netdev;
netif_device_detach(netdev);
@@ -3038,12 +3038,10 @@ static int __devinit atl1_probe(struct pci_dev *pdev,
(unsigned long)adapter);
adapter->phy_timer_pending = false;
- INIT_WORK(&adapter->tx_timeout_task, atl1_tx_timeout_task);
+ INIT_WORK(&adapter->reset_dev_task, atl1_reset_dev_task);
INIT_WORK(&adapter->link_chg_task, atlx_link_chg_task);
- INIT_WORK(&adapter->pcie_dma_to_rst_task, atl1_tx_timeout_task);
-
err = register_netdev(netdev);
if (err)
goto err_common;
diff --git a/drivers/net/ethernet/atheros/atlx/atl1.h b/drivers/net/ethernet/atheros/atlx/atl1.h
index 109d6da..e04bf4d 100644
--- a/drivers/net/ethernet/atheros/atlx/atl1.h
+++ b/drivers/net/ethernet/atheros/atlx/atl1.h
@@ -758,9 +758,8 @@ struct atl1_adapter {
u16 link_speed;
u16 link_duplex;
spinlock_t lock;
- struct work_struct tx_timeout_task;
+ struct work_struct reset_dev_task;
struct work_struct link_chg_task;
- struct work_struct pcie_dma_to_rst_task;
struct timer_list phy_config_timer;
bool phy_timer_pending;
diff --git a/drivers/net/ethernet/atheros/atlx/atlx.c b/drivers/net/ethernet/atheros/atlx/atlx.c
index 3cd8837..c9e9dc5 100644
--- a/drivers/net/ethernet/atheros/atlx/atlx.c
+++ b/drivers/net/ethernet/atheros/atlx/atlx.c
@@ -194,7 +194,7 @@ static void atlx_tx_timeout(struct net_device *netdev)
{
struct atlx_adapter *adapter = netdev_priv(netdev);
/* Do the reset outside of interrupt context */
- schedule_work(&adapter->tx_timeout_task);
+ schedule_work(&adapter->reset_dev_task);
}
/*
--
1.7.1
next reply other threads:[~2012-04-11 16:20 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-04-11 16:15 Tony Zelenoff [this message]
2012-04-13 17:35 ` [PATCH] atl1: fix kernel panic in case of DMA errors David Miller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1334160903-988902-1-git-send-email-antonz@parallels.com \
--to=antonz@parallels.com \
--cc=davem@davemloft.net \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).