netdev.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Karsten Keil <kkeil@linux-pingi.de>
To: David Miller <davem@davemloft.net>
Cc: netdev@vger.kernel.org, Andreas Eversberg <jolly@eversberg.eu>
Subject: [PATCH 1/4] mISDN: Fixed false interruption of audio during bridging change.
Date: Wed, 25 Apr 2012 08:52:11 +0200	[thread overview]
Message-ID: <1335336734-25181-2-git-send-email-kkeil@linux-pingi.de> (raw)
In-Reply-To: <1335336734-25181-1-git-send-email-kkeil@linux-pingi.de>

From: Andreas Eversberg <jolly@eversberg.eu>

Transmitted audio data was interrupted if a bridge was enabled or disabled.
Now transmission seamlessly continues during that action.
Fix in hfcmulti.ko

Signed-off-by: Andreas Eversberg <jolly@eversberg.eu>
Signed-off-by: Karsten Keil <keil@b1-systems.de>
---
 drivers/isdn/hardware/mISDN/hfcmulti.c |   24 ++++++++++++++++--------
 1 files changed, 16 insertions(+), 8 deletions(-)

diff --git a/drivers/isdn/hardware/mISDN/hfcmulti.c b/drivers/isdn/hardware/mISDN/hfcmulti.c
index 0332231..c4e7fda 100644
--- a/drivers/isdn/hardware/mISDN/hfcmulti.c
+++ b/drivers/isdn/hardware/mISDN/hfcmulti.c
@@ -3018,8 +3018,10 @@ mode_hfcmulti(struct hfc_multi *hc, int ch, int protocol, int slot_tx,
 			HFC_outb(hc, A_CON_HDLC, 0x20 | V_HDLC_TRP | V_IFF);
 			HFC_outb(hc, A_SUBCH_CFG, 0);
 			HFC_outb(hc, A_IRQ_MSK, 0);
-			HFC_outb(hc, R_INC_RES_FIFO, V_RES_F);
-			HFC_wait(hc);
+			if (hc->chan[ch].protocol != protocol) {
+				HFC_outb(hc, R_INC_RES_FIFO, V_RES_F);
+				HFC_wait(hc);
+			}
 			HFC_outb(hc, R_SLOT, ((((ch / 4) * 8) +
 					       ((ch % 4) * 4) + 1) << 1) | 1);
 			HFC_outb(hc, A_SL_CFG, 0x80 | 0x20 | (ch << 1) | 1);
@@ -3039,8 +3041,10 @@ mode_hfcmulti(struct hfc_multi *hc, int ch, int protocol, int slot_tx,
 			HFC_outb(hc, A_CON_HDLC, 0x20 | V_HDLC_TRP | V_IFF);
 			HFC_outb(hc, A_SUBCH_CFG, 0);
 			HFC_outb(hc, A_IRQ_MSK, 0);
-			HFC_outb(hc, R_INC_RES_FIFO, V_RES_F);
-			HFC_wait(hc);
+			if (hc->chan[ch].protocol != protocol) {
+				HFC_outb(hc, R_INC_RES_FIFO, V_RES_F);
+				HFC_wait(hc);
+			}
 			/* tx silence */
 			HFC_outb_nodebug(hc, A_FIFO_DATA0_NOINC, hc->silence);
 			HFC_outb(hc, R_SLOT, (((ch / 4) * 8) +
@@ -3059,8 +3063,10 @@ mode_hfcmulti(struct hfc_multi *hc, int ch, int protocol, int slot_tx,
 					 V_HDLC_TRP | V_IFF);
 			HFC_outb(hc, A_SUBCH_CFG, 0);
 			HFC_outb(hc, A_IRQ_MSK, 0);
-			HFC_outb(hc, R_INC_RES_FIFO, V_RES_F);
-			HFC_wait(hc);
+			if (hc->chan[ch].protocol != protocol) {
+				HFC_outb(hc, R_INC_RES_FIFO, V_RES_F);
+				HFC_wait(hc);
+			}
 			/* tx silence */
 			HFC_outb_nodebug(hc, A_FIFO_DATA0_NOINC, hc->silence);
 			/* enable RX fifo */
@@ -3075,8 +3081,10 @@ mode_hfcmulti(struct hfc_multi *hc, int ch, int protocol, int slot_tx,
 					 V_HDLC_TRP);
 			HFC_outb(hc, A_SUBCH_CFG, 0);
 			HFC_outb(hc, A_IRQ_MSK, 0);
-			HFC_outb(hc, R_INC_RES_FIFO, V_RES_F);
-			HFC_wait(hc);
+			if (hc->chan[ch].protocol != protocol) {
+				HFC_outb(hc, R_INC_RES_FIFO, V_RES_F);
+				HFC_wait(hc);
+			}
 		}
 		if (hc->ctype != HFC_TYPE_E1) {
 			hc->hw.a_st_ctrl0[hc->chan[ch].port] |=
-- 
1.7.3.4

  reply	other threads:[~2012-04-25  6:55 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-04-25  6:52 [PATCH 0/4] mISDN Fix and enhancements for the HFC 4S/8S/E1 driver Karsten Keil
2012-04-25  6:52 ` Karsten Keil [this message]
2012-04-25  6:52 ` [PATCH 2/4] mISDN: Using FLG_ACTIVE flag to determine if layer 1 is active or not Karsten Keil
2012-04-25  6:52 ` [PATCH 3/4] mISDN: Rework of LED status display for HFC-4S/8S/E1 cards Karsten Keil
2012-04-25  6:52 ` [PATCH 4/4] mISDN: Added support for fragmentation of E1 interfaces of hfcmulti driver Karsten Keil
2012-04-26  9:32 ` [PATCH 0/4] mISDN Fix and enhancements for the HFC 4S/8S/E1 driver David Miller

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1335336734-25181-2-git-send-email-kkeil@linux-pingi.de \
    --to=kkeil@linux-pingi.de \
    --cc=davem@davemloft.net \
    --cc=jolly@eversberg.eu \
    --cc=netdev@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).