From: Eldad Zack <eldad@fogrefinery.com>
To: "David S. Miller" <davem@davemloft.net>,
Alexey Kuznetsov <kuznet@ms2.inr.ac.ru>,
James Morris <jmorris@namei.org>,
Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org>,
Patrick McHardy <kaber@trash.net>
Cc: linux-kernel@vger.kernel.org, netdev@vger.kernel.org,
Eldad Zack <eldad@fogrefinery.com>
Subject: [PATCH resend] [IPV6] remove sysctl accept_source_route
Date: Sat, 5 May 2012 22:28:57 +0200 [thread overview]
Message-ID: <1336249737-26661-1-git-send-email-eldad@fogrefinery.com> (raw)
The only place where the accpet_source_route flag is checked is when we
are processing the type 2 routing header. In that case we only allow it if
it (1) has only segments left = 1 and (2) if it matches our home address,
which is the behavior required by RFC 6275 (see sections 8.5, 11.3.3), and
it doesn't make sense to block rh2 when we're a mobile node.
Signed-off-by: Eldad Zack <eldad@fogrefinery.com>
---
include/linux/ipv6.h | 2 --
net/ipv6/addrconf.c | 10 ----------
net/ipv6/exthdrs.c | 6 ------
3 files changed, 18 deletions(-)
diff --git a/include/linux/ipv6.h b/include/linux/ipv6.h
index 8260ef7..a77c6fe 100644
--- a/include/linux/ipv6.h
+++ b/include/linux/ipv6.h
@@ -162,7 +162,6 @@ struct ipv6_devconf {
#endif
#endif
__s32 proxy_ndp;
- __s32 accept_source_route;
#ifdef CONFIG_IPV6_OPTIMISTIC_DAD
__s32 optimistic_dad;
#endif
@@ -208,7 +207,6 @@ enum {
DEVCONF_ACCEPT_RA_RT_INFO_MAX_PLEN,
DEVCONF_PROXY_NDP,
DEVCONF_OPTIMISTIC_DAD,
- DEVCONF_ACCEPT_SOURCE_ROUTE,
DEVCONF_MC_FORWARDING,
DEVCONF_DISABLE_IPV6,
DEVCONF_ACCEPT_DAD,
diff --git a/net/ipv6/addrconf.c b/net/ipv6/addrconf.c
index e3b3421..bca2acf 100644
--- a/net/ipv6/addrconf.c
+++ b/net/ipv6/addrconf.c
@@ -194,7 +194,6 @@ static struct ipv6_devconf ipv6_devconf __read_mostly = {
#endif
#endif
.proxy_ndp = 0,
- .accept_source_route = 0, /* we do not accept RH0 by default. */
.disable_ipv6 = 0,
.accept_dad = 1,
};
@@ -228,7 +227,6 @@ static struct ipv6_devconf ipv6_devconf_dflt __read_mostly = {
#endif
#endif
.proxy_ndp = 0,
- .accept_source_route = 0, /* we do not accept RH0 by default. */
.disable_ipv6 = 0,
.accept_dad = 1,
};
@@ -3905,7 +3903,6 @@ static inline void ipv6_store_devconf(struct ipv6_devconf *cnf,
#endif
#endif
array[DEVCONF_PROXY_NDP] = cnf->proxy_ndp;
- array[DEVCONF_ACCEPT_SOURCE_ROUTE] = cnf->accept_source_route;
#ifdef CONFIG_IPV6_OPTIMISTIC_DAD
array[DEVCONF_OPTIMISTIC_DAD] = cnf->optimistic_dad;
#endif
@@ -4535,13 +4532,6 @@ static struct addrconf_sysctl_table
.mode = 0644,
.proc_handler = proc_dointvec,
},
- {
- .procname = "accept_source_route",
- .data = &ipv6_devconf.accept_source_route,
- .maxlen = sizeof(int),
- .mode = 0644,
- .proc_handler = proc_dointvec,
- },
#ifdef CONFIG_IPV6_OPTIMISTIC_DAD
{
.procname = "optimistic_dad",
diff --git a/net/ipv6/exthdrs.c b/net/ipv6/exthdrs.c
index aa0a51e..597cf2a 100644
--- a/net/ipv6/exthdrs.c
+++ b/net/ipv6/exthdrs.c
@@ -337,12 +337,8 @@ static int ipv6_rthdr_rcv(struct sk_buff *skb)
struct ipv6_rt_hdr *hdr;
struct rt0_hdr *rthdr;
struct net *net = dev_net(skb->dev);
- int accept_source_route = net->ipv6.devconf_all->accept_source_route;
idev = __in6_dev_get(skb->dev);
- if (idev && accept_source_route > idev->cnf.accept_source_route)
- accept_source_route = idev->cnf.accept_source_route;
-
if (!pskb_may_pull(skb, skb_transport_offset(skb) + 8) ||
!pskb_may_pull(skb, (skb_transport_offset(skb) +
((skb_transport_header(skb)[1] + 1) << 3)))) {
@@ -393,8 +389,6 @@ looped_back:
switch (hdr->type) {
#if defined(CONFIG_IPV6_MIP6) || defined(CONFIG_IPV6_MIP6_MODULE)
case IPV6_SRCRT_TYPE_2:
- if (accept_source_route < 0)
- goto unknown_rh;
/* Silently discard invalid RTH type 2 */
if (hdr->hdrlen != 2 || hdr->segments_left != 1) {
IP6_INC_STATS_BH(net, ip6_dst_idev(skb_dst(skb)),
--
1.7.10
next reply other threads:[~2012-05-05 20:28 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-05-05 20:28 Eldad Zack [this message]
2012-05-06 16:41 ` [PATCH resend] [IPV6] remove sysctl accept_source_route David Miller
2012-05-07 20:52 ` Eldad Zack
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1336249737-26661-1-git-send-email-eldad@fogrefinery.com \
--to=eldad@fogrefinery.com \
--cc=davem@davemloft.net \
--cc=jmorris@namei.org \
--cc=kaber@trash.net \
--cc=kuznet@ms2.inr.ac.ru \
--cc=linux-kernel@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=yoshfuji@linux-ipv6.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox