[PATCH 0/4] netxen: Fixes

[PATCH 0/4] netxen: Fixes

[Rajesh Borundia]

Please apply it to net-next.

[PATCH net-next 1/4] netxen_nic: disable minidump by default

[Rajesh Borundia]

From: Sritej Velaga <sritej.velaga@qlogic.com>

disable fw dump by default at start up.

Signed-off-by: Sritej Velaga <sritej.velaga@qlogic.com>
Signed-off-by: Rajesh Borundia <rajesh.borundia@qlogic.com>
---
 .../net/ethernet/qlogic/netxen/netxen_nic_ctx.c    |    2 +-
 1 files changed, 1 insertions(+), 1 deletions(-)

diff --git a/drivers/net/ethernet/qlogic/netxen/netxen_nic_ctx.c b/drivers/net/ethernet/qlogic/netxen/netxen_nic_ctx.c
index f3c0057..c86ea12 100644
--- a/drivers/net/ethernet/qlogic/netxen/netxen_nic_ctx.c
+++ b/drivers/net/ethernet/qlogic/netxen/netxen_nic_ctx.c
@@ -229,7 +229,7 @@ netxen_setup_minidump(struct netxen_adapter *adapter)
 				adapter->mdump.md_template;
 	adapter->mdump.md_capture_buff = NULL;
 	adapter->mdump.fw_supports_md = 1;
-	adapter->mdump.md_enabled = 1;
+	adapter->mdump.md_enabled = 0;
 
 	return err;
 
-- 
1.7.3.3

[PATCH net-next 2/4] netxen_nic: Allow only useful and recommended firmware dump capture mask values

[Rajesh Borundia]

From: Manish chopra <manish.chopra@qlogic.com>

o 0x3, 0x7, 0xF, 0x1F, 0x3F, 0x7F and 0xFF are the allowed capture masks.

Signed-off-by: Manish chopra <manish.chopra@qlogic.com>
Signed-off-by: Rajesh Borundia <rajesh.borundia@qlogic.com>
---
 drivers/net/ethernet/qlogic/netxen/netxen_nic.h    |    4 ++++
 .../ethernet/qlogic/netxen/netxen_nic_ethtool.c    |   18 ++++++++++--------
 2 files changed, 14 insertions(+), 8 deletions(-)

diff --git a/drivers/net/ethernet/qlogic/netxen/netxen_nic.h b/drivers/net/ethernet/qlogic/netxen/netxen_nic.h
index b5de8a7..b8614af 100644
--- a/drivers/net/ethernet/qlogic/netxen/netxen_nic.h
+++ b/drivers/net/ethernet/qlogic/netxen/netxen_nic.h
@@ -1201,6 +1201,10 @@ typedef struct {
 #define NX_FORCE_FW_RESET               0xdeaddead
 
 
+/* Fw dump levels */
+static const u32 FW_DUMP_LEVELS[] = {
+	0x3, 0x7, 0xf, 0x1f, 0x3f, 0x7f, 0xff };
+
 /* Flash read/write address */
 #define NX_FW_DUMP_REG1         0x00130060
 #define NX_FW_DUMP_REG2         0x001e0000
diff --git a/drivers/net/ethernet/qlogic/netxen/netxen_nic_ethtool.c b/drivers/net/ethernet/qlogic/netxen/netxen_nic_ethtool.c
index 8c39299..3973040 100644
--- a/drivers/net/ethernet/qlogic/netxen/netxen_nic_ethtool.c
+++ b/drivers/net/ethernet/qlogic/netxen/netxen_nic_ethtool.c
@@ -834,7 +834,7 @@ netxen_get_dump_flag(struct net_device *netdev, struct ethtool_dump *dump)
 static int
 netxen_set_dump(struct net_device *netdev, struct ethtool_dump *val)
 {
-	int ret = 0;
+	int i;
 	struct netxen_adapter *adapter = netdev_priv(netdev);
 	struct netxen_minidump *mdump = &adapter->mdump;
 
@@ -844,7 +844,7 @@ netxen_set_dump(struct net_device *netdev, struct ethtool_dump *val)
 			mdump->md_enabled = 1;
 		if (adapter->fw_mdump_rdy) {
 			netdev_info(netdev, "Previous dump not cleared, not forcing dump\n");
-			return ret;
+			return 0;
 		}
 		netdev_info(netdev, "Forcing a fw dump\n");
 		nx_dev_request_reset(adapter);
@@ -867,19 +867,21 @@ netxen_set_dump(struct net_device *netdev, struct ethtool_dump *val)
 		adapter->flags &= ~NETXEN_FW_RESET_OWNER;
 		break;
 	default:
-		if (val->flag <= NX_DUMP_MASK_MAX &&
-			val->flag >= NX_DUMP_MASK_MIN) {
-			mdump->md_capture_mask = val->flag & 0xff;
-			netdev_info(netdev, "Driver mask changed to: 0x%x\n",
+		for (i = 0; i < ARRAY_SIZE(FW_DUMP_LEVELS); i++) {
+			if (val->flag == FW_DUMP_LEVELS[i]) {
+				mdump->md_capture_mask = val->flag;
+				netdev_info(netdev,
+					"Driver mask changed to: 0x%x\n",
 					mdump->md_capture_mask);
-			break;
+				return 0;
+			}
 		}
 		netdev_info(netdev,
 			"Invalid dump level: 0x%x\n", val->flag);
 		return -EINVAL;
 	}
 
-	return ret;
+	return 0;
 }
 
 static int
-- 
1.7.3.3

Re: [PATCH net-next 2/4] netxen_nic: Allow only useful and recommended firmware dump capture mask values

[David Miller]

From: Rajesh Borundia <rajesh.borundia@qlogic.com>
Date: Tue, 8 May 2012 08:01:26 -0700

> +/* Fw dump levels */
> +static const u32 FW_DUMP_LEVELS[] = {
> +	0x3, 0x7, 0xf, 0x1f, 0x3f, 0x7f, 0xff };

Format this more reasonably, this looks terrible.

[PATCH net-next 3/4] netxen: added miniDIMM support in driver.

[Rajesh Borundia]

From: Sucheta Chakraborty <sucheta.chakraborty@qlogic.com>

Driver queries DIMM information from firmware and accordingly
sets "presence" field of the structure.
"presence" field when set to 0xff denotes invalid flag. And when
set to 0x0 denotes DIMM memory is not present.

Signed-off-by: Sucheta Chakraborty <sucheta.chakraborty@qlogic.com>
Signed-off-by: Rajesh Borundia <rajesh.borundia@qlogic.com>
---
 drivers/net/ethernet/qlogic/netxen/netxen_nic.h    |    7 +
 .../net/ethernet/qlogic/netxen/netxen_nic_hdr.h    |   25 ++++
 .../net/ethernet/qlogic/netxen/netxen_nic_main.c   |  131 ++++++++++++++++++++
 3 files changed, 163 insertions(+), 0 deletions(-)

diff --git a/drivers/net/ethernet/qlogic/netxen/netxen_nic.h b/drivers/net/ethernet/qlogic/netxen/netxen_nic.h
index b8614af..a43a26c 100644
--- a/drivers/net/ethernet/qlogic/netxen/netxen_nic.h
+++ b/drivers/net/ethernet/qlogic/netxen/netxen_nic.h
@@ -1818,6 +1818,13 @@ struct netxen_brdinfo {
 	char short_name[NETXEN_MAX_SHORT_NAME];
 };
 
+struct netxen_dimm_cfg {
+	u8 presence;
+	u8 mem_type;
+	u8 dimm_type;
+	u32 size;
+};
+
 static const struct netxen_brdinfo netxen_boards[] = {
 	{NETXEN_BRDTYPE_P2_SB31_10G_CX4, 1, "XGb CX4"},
 	{NETXEN_BRDTYPE_P2_SB31_10G_HMEZ, 1, "XGb HMEZ"},
diff --git a/drivers/net/ethernet/qlogic/netxen/netxen_nic_hdr.h b/drivers/net/ethernet/qlogic/netxen/netxen_nic_hdr.h
index b1a897c..a41106b 100644
--- a/drivers/net/ethernet/qlogic/netxen/netxen_nic_hdr.h
+++ b/drivers/net/ethernet/qlogic/netxen/netxen_nic_hdr.h
@@ -955,6 +955,31 @@ enum {
 #define NX_CRB_DEV_REF_COUNT		(NETXEN_CAM_RAM(0x138))
 #define NX_CRB_DEV_STATE		(NETXEN_CAM_RAM(0x140))
 
+/* MiniDIMM related macros */
+#define NETXEN_DIMM_CAPABILITY		(NETXEN_CAM_RAM(0x258))
+#define NETXEN_DIMM_PRESENT			0x1
+#define NETXEN_DIMM_MEMTYPE_DDR2_SDRAM	0x2
+#define NETXEN_DIMM_SIZE			0x4
+#define NETXEN_DIMM_MEMTYPE(VAL)		((VAL >> 3) & 0xf)
+#define	NETXEN_DIMM_NUMROWS(VAL)		((VAL >> 7) & 0xf)
+#define	NETXEN_DIMM_NUMCOLS(VAL)		((VAL >> 11) & 0xf)
+#define	NETXEN_DIMM_NUMRANKS(VAL)		((VAL >> 15) & 0x3)
+#define NETXEN_DIMM_DATAWIDTH(VAL)		((VAL >> 18) & 0x3)
+#define NETXEN_DIMM_NUMBANKS(VAL)		((VAL >> 21) & 0xf)
+#define NETXEN_DIMM_TYPE(VAL)		((VAL >> 25) & 0x3f)
+#define NETXEN_DIMM_VALID_FLAG		0x80000000
+
+#define NETXEN_DIMM_MEM_DDR2_SDRAM	0x8
+
+#define NETXEN_DIMM_STD_MEM_SIZE	512
+
+#define NETXEN_DIMM_TYPE_RDIMM	0x1
+#define NETXEN_DIMM_TYPE_UDIMM	0x2
+#define NETXEN_DIMM_TYPE_SO_DIMM	0x4
+#define NETXEN_DIMM_TYPE_Micro_DIMM	0x8
+#define NETXEN_DIMM_TYPE_Mini_RDIMM	0x10
+#define NETXEN_DIMM_TYPE_Mini_UDIMM	0x20
+
 /* Device State */
 #define NX_DEV_COLD		1
 #define NX_DEV_INITALIZING	2
diff --git a/drivers/net/ethernet/qlogic/netxen/netxen_nic_main.c b/drivers/net/ethernet/qlogic/netxen/netxen_nic_main.c
index 65a718f..05f3ffe 100644
--- a/drivers/net/ethernet/qlogic/netxen/netxen_nic_main.c
+++ b/drivers/net/ethernet/qlogic/netxen/netxen_nic_main.c
@@ -2926,6 +2926,134 @@ static struct bin_attribute bin_attr_mem = {
 	.write = netxen_sysfs_write_mem,
 };
 
+static ssize_t
+netxen_sysfs_read_dimm(struct file *filp, struct kobject *kobj,
+		struct bin_attribute *attr,
+		char *buf, loff_t offset, size_t size)
+{
+	struct device *dev = container_of(kobj, struct device, kobj);
+	struct netxen_adapter *adapter = dev_get_drvdata(dev);
+	struct net_device *netdev = adapter->netdev;
+	struct netxen_dimm_cfg dimm;
+	u8 dw, rows, cols, banks, ranks;
+	u32 val;
+
+	if (size != sizeof(struct netxen_dimm_cfg)) {
+		netdev_err(netdev, "Invalid size\n");
+		return -1;
+	}
+
+	memset(&dimm, 0, sizeof(struct netxen_dimm_cfg));
+	val = NXRD32(adapter, NETXEN_DIMM_CAPABILITY);
+
+	/* Checks if DIMM info is valid. */
+	if (val & NETXEN_DIMM_VALID_FLAG) {
+		netdev_err(netdev, "Invalid DIMM flag\n");
+		dimm.presence = 0xff;
+		goto out;
+	}
+
+	rows = NETXEN_DIMM_NUMROWS(val);
+	cols = NETXEN_DIMM_NUMCOLS(val);
+	ranks = NETXEN_DIMM_NUMRANKS(val);
+	banks = NETXEN_DIMM_NUMBANKS(val);
+	dw = NETXEN_DIMM_DATAWIDTH(val);
+
+	dimm.presence = (val & NETXEN_DIMM_PRESENT);
+
+	/* Checks if DIMM info is present. */
+	if (!dimm.presence) {
+		netdev_err(netdev, "DIMM not present\n");
+		goto out;
+	}
+
+	dimm.dimm_type = NETXEN_DIMM_TYPE(val);
+
+	switch (dimm.dimm_type) {
+	case NETXEN_DIMM_TYPE_RDIMM:
+	case NETXEN_DIMM_TYPE_UDIMM:
+	case NETXEN_DIMM_TYPE_SO_DIMM:
+	case NETXEN_DIMM_TYPE_Micro_DIMM:
+	case NETXEN_DIMM_TYPE_Mini_RDIMM:
+	case NETXEN_DIMM_TYPE_Mini_UDIMM:
+		break;
+	default:
+		netdev_err(netdev, "Invalid DIMM type %x\n", dimm.dimm_type);
+		goto out;
+	}
+
+	if (val & NETXEN_DIMM_MEMTYPE_DDR2_SDRAM)
+		dimm.mem_type = NETXEN_DIMM_MEM_DDR2_SDRAM;
+	else
+		dimm.mem_type = NETXEN_DIMM_MEMTYPE(val);
+
+	if (val & NETXEN_DIMM_SIZE) {
+		dimm.size = NETXEN_DIMM_STD_MEM_SIZE;
+		goto out;
+	}
+
+	if (!rows) {
+		netdev_err(netdev, "Invalid no of rows %x\n", rows);
+		goto out;
+	}
+
+	if (!cols) {
+		netdev_err(netdev, "Invalid no of columns %x\n", cols);
+		goto out;
+	}
+
+	if (!banks) {
+		netdev_err(netdev, "Invalid no of banks %x\n", banks);
+		goto out;
+	}
+
+	ranks += 1;
+
+	switch (dw) {
+	case 0x0:
+		dw = 32;
+		break;
+	case 0x1:
+		dw = 33;
+		break;
+	case 0x2:
+		dw = 36;
+		break;
+	case 0x3:
+		dw = 64;
+		break;
+	case 0x4:
+		dw = 72;
+		break;
+	case 0x5:
+		dw = 80;
+		break;
+	case 0x6:
+		dw = 128;
+		break;
+	case 0x7:
+		dw = 144;
+		break;
+	default:
+		netdev_err(netdev, "Invalid data-width %x\n", dw);
+		goto out;
+	}
+
+	dimm.size = ((1 << rows) * (1 << cols) * dw * banks * ranks) / 8;
+	/* Size returned in MB. */
+	dimm.size = (dimm.size) / 0x100000;
+out:
+	memcpy(buf, &dimm, sizeof(struct netxen_dimm_cfg));
+	return sizeof(struct netxen_dimm_cfg);
+
+}
+
+static struct bin_attribute bin_attr_dimm = {
+	.attr = {.name = "dimm", .mode = (S_IRUGO | S_IWUSR)},
+	.size = 0,
+	.read = netxen_sysfs_read_dimm,
+};
+
 
 static void
 netxen_create_sysfs_entries(struct netxen_adapter *adapter)
@@ -2963,6 +3091,8 @@ netxen_create_diag_entries(struct netxen_adapter *adapter)
 		dev_info(dev, "failed to create crb sysfs entry\n");
 	if (device_create_bin_file(dev, &bin_attr_mem))
 		dev_info(dev, "failed to create mem sysfs entry\n");
+	if (device_create_bin_file(dev, &bin_attr_dimm))
+		dev_info(dev, "failed to create dimm sysfs entry\n");
 }
 
 
@@ -2975,6 +3105,7 @@ netxen_remove_diag_entries(struct netxen_adapter *adapter)
 	device_remove_file(dev, &dev_attr_diag_mode);
 	device_remove_bin_file(dev, &bin_attr_crb);
 	device_remove_bin_file(dev, &bin_attr_mem);
+	device_remove_bin_file(dev, &bin_attr_dimm);
 }
 
 #ifdef CONFIG_INET
-- 
1.7.3.3

Re: [PATCH net-next 3/4] netxen: added miniDIMM support in driver.

[David Miller]

From: Rajesh Borundia <rajesh.borundia@qlogic.com>
Date: Tue, 8 May 2012 08:01:27 -0700

> +static struct bin_attribute bin_attr_dimm = {
> +	.attr = {.name = "dimm", .mode = (S_IRUGO | S_IWUSR)},

How about a space next to the braces?

RE: [PATCH net-next 3/4] netxen: added miniDIMM support in driver.

[Rajesh Borundia]

> -----Original Message-----
> From: David Miller [mailto:davem@davemloft.net]
> Sent: Tuesday, May 08, 2012 10:23 PM
> To: Rajesh Borundia
> Cc: netdev; Ameen Rahman; Sony Chacko; Sucheta Chakraborty
> Subject: Re: [PATCH net-next 3/4] netxen: added miniDIMM support in
> driver.
> 
> From: Rajesh Borundia <rajesh.borundia@qlogic.com>
> Date: Tue, 8 May 2012 08:01:27 -0700
> 
> > +static struct bin_attribute bin_attr_dimm = {
> > +	.attr = {.name = "dimm", .mode = (S_IRUGO | S_IWUSR)},
> 
> How about a space next to the braces?
> 

I will resend the patches with review changes.

Rajesh

[PATCH net-next 4/4] netxen_nic: Fix estimation of recv MSS in case of LRO

[Rajesh Borundia]

o Linux stack estimates MSS from skb->len or skb_shinfo(skb)->gso_size.
In case of LRO skb->len is aggregate of len of number of packets hence MSS
obtained using skb->len would be incorrect. Incorrect estimation of recv MSS
would lead to delayed acks in some traffic patterns (which sends two or three
packets and wait for ack and only then send remaining packets). This leads to
drop in performance. Hence we need to set gso_size to MSS obtained from firmware.

o This is fixed recently in firmware hence the MSS is obtained based on
capability. If fw is capable of sending the MSS then only driver sets the gso_size.

Signed-off-by: Rajesh Borundia <rajesh.borundia@qlogic.com>
---
 drivers/net/ethernet/qlogic/netxen/netxen_nic.h    |   10 ++++++++--
 .../net/ethernet/qlogic/netxen/netxen_nic_ctx.c    |    3 +++
 .../net/ethernet/qlogic/netxen/netxen_nic_hdr.h    |    1 +
 .../net/ethernet/qlogic/netxen/netxen_nic_init.c   |    4 +++-
 .../net/ethernet/qlogic/netxen/netxen_nic_main.c   |    9 ++++++++-
 5 files changed, 23 insertions(+), 4 deletions(-)

diff --git a/drivers/net/ethernet/qlogic/netxen/netxen_nic.h b/drivers/net/ethernet/qlogic/netxen/netxen_nic.h
index a43a26c..36ae0ae 100644
--- a/drivers/net/ethernet/qlogic/netxen/netxen_nic.h
+++ b/drivers/net/ethernet/qlogic/netxen/netxen_nic.h
@@ -53,8 +53,8 @@
 
 #define _NETXEN_NIC_LINUX_MAJOR 4
 #define _NETXEN_NIC_LINUX_MINOR 0
-#define _NETXEN_NIC_LINUX_SUBVERSION 78
-#define NETXEN_NIC_LINUX_VERSIONID  "4.0.78"
+#define _NETXEN_NIC_LINUX_SUBVERSION 79
+#define NETXEN_NIC_LINUX_VERSIONID  "4.0.79"
 
 #define NETXEN_VERSION_CODE(a, b, c)	(((a) << 24) + ((b) << 16) + (c))
 #define _major(v)	(((v) >> 24) & 0xff)
@@ -419,6 +419,8 @@ struct rcv_desc {
 	(((sts_data) >> 52) & 0x1)
 #define netxen_get_lro_sts_seq_number(sts_data)		\
 	((sts_data) & 0x0FFFFFFFF)
+#define netxen_get_lro_sts_mss(sts_data1)		\
+	((sts_data1 >> 32) & 0x0FFFF)
 
 
 struct status_desc {
@@ -794,6 +796,7 @@ struct netxen_cmd_args {
 #define NX_CAP0_JUMBO_CONTIGUOUS	NX_CAP_BIT(0, 7)
 #define NX_CAP0_LRO_CONTIGUOUS		NX_CAP_BIT(0, 8)
 #define NX_CAP0_HW_LRO			NX_CAP_BIT(0, 10)
+#define NX_CAP0_HW_LRO_MSS		NX_CAP_BIT(0, 21)
 
 /*
  * Context state
@@ -1073,6 +1076,8 @@ typedef struct {
 #define NX_FW_CAPABILITY_FVLANTX		(1 << 9)
 #define NX_FW_CAPABILITY_HW_LRO			(1 << 10)
 #define NX_FW_CAPABILITY_GBE_LINK_CFG		(1 << 11)
+#define NX_FW_CAPABILITY_MORE_CAPS		(1 << 31)
+#define NX_FW_CAPABILITY_2_LRO_MAX_TCP_SEG	(1 << 2)
 
 /* module types */
 #define LINKEVENT_MODULE_NOT_PRESENT			1
@@ -1155,6 +1160,7 @@ typedef struct {
 #define NETXEN_NIC_BRIDGE_ENABLED       0X10
 #define NETXEN_NIC_DIAG_ENABLED		0x20
 #define NETXEN_FW_RESET_OWNER           0x40
+#define NETXEN_FW_MSS_CAP	        0x80
 #define NETXEN_IS_MSI_FAMILY(adapter) \
 	((adapter)->flags & (NETXEN_NIC_MSI_ENABLED | NETXEN_NIC_MSIX_ENABLED))
 
diff --git a/drivers/net/ethernet/qlogic/netxen/netxen_nic_ctx.c b/drivers/net/ethernet/qlogic/netxen/netxen_nic_ctx.c
index c86ea12..7f556a8 100644
--- a/drivers/net/ethernet/qlogic/netxen/netxen_nic_ctx.c
+++ b/drivers/net/ethernet/qlogic/netxen/netxen_nic_ctx.c
@@ -328,6 +328,9 @@ nx_fw_cmd_create_rx_ctx(struct netxen_adapter *adapter)
 	cap = (NX_CAP0_LEGACY_CONTEXT | NX_CAP0_LEGACY_MN);
 	cap |= (NX_CAP0_JUMBO_CONTIGUOUS | NX_CAP0_LRO_CONTIGUOUS);
 
+	if (adapter->flags & NETXEN_FW_MSS_CAP)
+		cap |= NX_CAP0_HW_LRO_MSS;
+
 	prq->capabilities[0] = cpu_to_le32(cap);
 	prq->host_int_crb_mode =
 		cpu_to_le32(NX_HOST_INT_CRB_MODE_SHARED);
diff --git a/drivers/net/ethernet/qlogic/netxen/netxen_nic_hdr.h b/drivers/net/ethernet/qlogic/netxen/netxen_nic_hdr.h
index a41106b..28e0769 100644
--- a/drivers/net/ethernet/qlogic/netxen/netxen_nic_hdr.h
+++ b/drivers/net/ethernet/qlogic/netxen/netxen_nic_hdr.h
@@ -776,6 +776,7 @@ enum {
 #define CRB_SW_INT_MASK_3		(NETXEN_NIC_REG(0x1e8))
 
 #define CRB_FW_CAPABILITIES_1		(NETXEN_CAM_RAM(0x128))
+#define CRB_FW_CAPABILITIES_2		(NETXEN_CAM_RAM(0x12c))
 #define CRB_MAC_BLOCK_START		(NETXEN_CAM_RAM(0x1c0))
 
 /*
diff --git a/drivers/net/ethernet/qlogic/netxen/netxen_nic_init.c b/drivers/net/ethernet/qlogic/netxen/netxen_nic_init.c
index 718b274..0d725dc 100644
--- a/drivers/net/ethernet/qlogic/netxen/netxen_nic_init.c
+++ b/drivers/net/ethernet/qlogic/netxen/netxen_nic_init.c
@@ -1131,7 +1131,6 @@ netxen_validate_firmware(struct netxen_adapter *adapter)
 		 _build(file_fw_ver));
 		return -EINVAL;
 	}
-
 	val = nx_get_bios_version(adapter);
 	netxen_rom_fast_read(adapter, NX_BIOS_VERSION_OFFSET, (int *)&bios);
 	if ((__force u32)val != bios) {
@@ -1661,6 +1660,9 @@ netxen_process_lro(struct netxen_adapter *adapter,
 
 	length = skb->len;
 
+	if (adapter->flags & NETXEN_FW_MSS_CAP)
+		skb_shinfo(skb)->gso_size  =  netxen_get_lro_sts_mss(sts_data1);
+
 	netif_receive_skb(skb);
 
 	adapter->stats.lro_pkts++;
diff --git a/drivers/net/ethernet/qlogic/netxen/netxen_nic_main.c b/drivers/net/ethernet/qlogic/netxen/netxen_nic_main.c
index 05f3ffe..b025940 100644
--- a/drivers/net/ethernet/qlogic/netxen/netxen_nic_main.c
+++ b/drivers/net/ethernet/qlogic/netxen/netxen_nic_main.c
@@ -1184,6 +1184,7 @@ netxen_nic_attach(struct netxen_adapter *adapter)
 	int err, ring;
 	struct nx_host_rds_ring *rds_ring;
 	struct nx_host_tx_ring *tx_ring;
+	u32 capab2;
 
 	if (adapter->is_up == NETXEN_ADAPTER_UP_MAGIC)
 		return 0;
@@ -1192,6 +1193,13 @@ netxen_nic_attach(struct netxen_adapter *adapter)
 	if (err)
 		return err;
 
+	adapter->flags &= ~NETXEN_FW_MSS_CAP;
+	if (adapter->capabilities & NX_FW_CAPABILITY_MORE_CAPS) {
+		capab2 = NXRD32(adapter, CRB_FW_CAPABILITIES_2);
+		if (capab2 & NX_FW_CAPABILITY_2_LRO_MAX_TCP_SEG)
+			adapter->flags |= NETXEN_FW_MSS_CAP;
+	}
+
 	err = netxen_napi_add(adapter, netdev);
 	if (err)
 		return err;
@@ -1810,7 +1818,6 @@ netxen_tso_check(struct net_device *netdev,
 		flags = FLAGS_VLAN_TAGGED;
 
 	} else if (vlan_tx_tag_present(skb)) {
-
 		flags = FLAGS_VLAN_OOB;
 		vid = vlan_tx_tag_get(skb);
 		netxen_set_tx_vlan_tci(first_desc, vid);
-- 
1.7.3.3

[PATCH 0/4] netxen fixes

[Dhananjay Phadke]

Sending couple of patches that had failed to apply in last submission,
with two new fixes/optimizations.

Thanks,
-Dhananjay